HT15R100K160CG 概述
Halogen Free & RoHS Compliance
HT15R100K160CG 数据手册
通过下载HT15R100K160CG数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Multilayer Ceramic Capacitors
Approval Sheet
MULTILAYER CERAMIC CAPACITORS
High Temperature Series (10V to 100V)
0402 to 1210 Sizes
X8G & X8R Dielectrics
Halogen Free & RoHS Compliance
*Contents in this sheet are subject to change without prior notice.
Page 1 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
1. DESCRIPTION
MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization,
high density and high efficiency, ceramic condensers are used.
WTC’s HT Series High Temperature Multilayer Ceramic Capacitors is designed with high temperature components by
offering maximum operating temperature range and higher reliability performance up to 150°C. These MLC Cs are
manufactured with X8G and X8R dielectric materials. They provide a highly reliable capacitor with low loss and stable
capacitance over temperature. These MLCCs are ideal for most high temperature and reliability market sectors as well.
2. FEATURES
3. APPLICATIONS
a. These products have no polarity.
b. Their electrostatic capacity temperature response is
stable at 15% even in high temperature ranges
(up to 150°C).
a. Measuring instruments used in high temperature
environments.
b. For time constants and filter circuitry (up to 125°C).
c. LCD display
c. Larger capacity and smaller size (0402 size) with
X8G/X8R characteristics
d. Sensor Module
e. Smoothing and decoupling applications for other
devices that operate at high temperature
h. Other automotive/industrial sets that must withstand
high temperatures
4. HOW TO ORDER
HT
15
G
100
J
500
C
T
Series
Size
Dielectric
Capacitance
Tolerance
Rated voltage
Termination
Packaging
HT=High
15=0402 (1005) G=X8G
18=0603 (1608) R=X8R
21=0805 (2012)
Two significant
A=±0.05pF Two significant
C=Cu/Ni/Sn
T=7” reeled
Temperature
digits followed by B=±0.1pF digits followed by
no. of zeros. And C=±0.25pF no. of zeros. And
G= 13” reeled
31=1206 (3216)
R is in place of
decimal point.
D=±0.5pF R is in place of
32=1210 (3225)
F=±1%
G=±2%
J=±5%
decimal point.
eg.:
100=10 VDC
160=16 VDC
250=25 VDC
500=50 VDC
101=100 VDC
0R5=0.5pF
1R0=1.0pF
100=10x100
=10pF
K=±10%
M=±20%
Page 2 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
5. EXTERNAL DIMENSIONS
Size
Inch (mm)
L (mm)
W (mm)
T (mm)/Symbol
Remark
MB (mm)
L
0.25
0402 (1005)
1.00±0.05
1.60±0.10
0.50±0.05
0.80±0.10
0.50±0.05
0.80±0.07
N
#
T
+0.05/-0.10
S
X
0603(1608)
0805 (2012)
0.40±0.15
0.50±0.20
1.60
+0.15/-0.10
0.80
+0.15/-0.10
0.80
+0.15/-0.10
W
MB
MB
0.60±0.10
A
B
D
B
C
D
C
D
2.00±0.15
1.25±0.10
0.80±0.10
1.25±0.10
0.80±0.10
0.95±0.10
1.25±0.10
0.95±0.10
1.25±0.10
Fig. 1 The outline of MLCC
#
1206 (3216)
1210 (3225)
3.20±0.15
3.20±0.30
1.60±0.15
2.50±0.20
0.60±0.20
0.75±0.25
#
#
#
# Reflow soldering only is recommended.
6. GENERAL ELECTRICAL DATA
Dielectric
Size
X8G
X8R
0402, 0603, 0805, 1206, 1210
Capacitance
0.2pF to 0.015µF
100pF to 0.047µF
Cap≤5pF: A (±0.05pF), B (±0.1pF),C (±0.25pF)
5pF<Cap<10pF: C (±0.25pF), D (±0.5pF)
Cap≥10pF: F (±1%), G (±2%), J (±5%), K (±10%)
Capacitance tolerance*
K (±10%), M (±20%)
Rated voltage (WVDC)
Q/DF*
10V, 16V, 25V, 50V, 100V
Cap<30pF: Q≥400+20C
Cap≥30pF: Q≥1000
DF≤5%
Insulation resistance at Ur**
Operating temperature
10GΩ or RxC≥500Ω-F whichever is smaller
-55 to +150°C
Capacitance characteristic
Termination
±30ppm/°C
±15%
Ni/Sn (lead-free termination)
* Measured at the condition of 30~70% related humidity.
X8G: Apply 1.0±0.2Vrms, 1.0MHz±10% for Cap≤1000pF and 1.0±0.2Vrms, 1.0kHz±10% for Cap>1000pF, 25°C at ambient temperature
X8R: Apply 1.0±0.2Vrms, 1.0kHz±10%, 25°C at ambient temperature
** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour and then leave i n ambient condition for 24±2
hours before measurement.
Page 3 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
7. CAPACITANCE RANGE
7-1. X8G Dielectric 0402, 0603, 0805 Sizes
DIELECTRIC
X8G
0603
SIZE
0402
0805
25
RATED VOLTAGE
(VDC)
10
16
25
50
10
16
25
50
100
10
16
50
100
0.1pF (0R1)
0.2pF (0R2)
0.3pF (0R3)
0.4pF (0R4)
0.5pF (0R5)
1.0pF (1R0)
1.2pF (1R2)
1.5pF (1R5)
1.8pF (1R8)
2.0pF (2R0)
2.2pF (2R2)
2.7pF (2R7)
3.0pF (3R0)
3.3pF (3R3)
3.9pF (3R9)
4.0pF (4R0)
4.7pF (4R7)
5.0pF (5R0)
5.6pF (5R6)
6.0pF (6R0)
6.8pF (6R8)
7.0pF (7R0)
8.0pF (8R0)
8.2pF (8R2)
9.0pF (9R0)
10pF (100)
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
D
D
D
D
12pF (120)
15pF (150)
18pF (180)
22pF (220)
27pF (270)
33pF (330)
39pF (390)
47pF (470)
56pF (560)
68pF (680)
82pF (820)
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
2,700pF (272)
3,300pF (332)
3,900pF (392)
4,700pF (472)
5,600pF (562)
6,800pF (682)
8,200pF (822)
0.010uF (103)
1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.
Page 4 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
7-1. X8G Dielectric 1206, 1210 Sizes
DIELECTRIC
X8G
SIZE
1206
1210
RATED VOLTAGE
(VDC)
10
16
25
50
100
10
16
25
50
1.0pF (1R0)
1.2pF (1R2)
1.5pF (1R5)
1.8pF (1R8)
2.0pF (2R0)
2.2pF (2R2)
2.7pF (2R7)
3.0pF (3R0)
3.3pF (3R3)
3.9pF (3R9)
4.0pF (4R0)
4.7pF (4R7)
5.0pF (5R0)
5.6pF (5R6)
6.0pF (6R0)
6.8pF (6R8)
7.0pF (7R0)
8.0pF (8R0)
8.2pF (8R2)
9.0pF (9R0)
10pF (100)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
D
D
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
D
D
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
D
D
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
D
D
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
12pF (120)
15pF (150)
18pF (180)
22pF (220)
27pF (270)
33pF (330)
39pF (390)
47pF (470)
56pF (560)
68pF (680)
82pF (820)
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
2,700pF (272)
3,300pF (332)
3,900pF (392)
4,700pF (472)
5,600pF (562)
6,800pF (682)
8,200pF (822)
0.010µF (103)
0.012µF (123)
0.015µF (153)
1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.
Page 5 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
7-2. X8R Dielectric 0603, 0805, 1206 Sizes
DIELECTRIC
X8R
SIZE
0402
0603
0805
RATED VOLTAGE
(VDC)
10
16
25
50
10
16
25
50
10
16
25
50
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
2,700pF (272)
3,300pF (332)
3,900pF (392)
4,700pF (472)
5,600pF (562)
6,800pF (682)
8,200pF (822)
0.010µF (103)
0.012µF (123)
0.015µF (153)
0.018µF (183)
0.022µF (223)
0.027µF (273)
0.033µF (333)
0.039µF (393)
0.047µF (473)
0.056µF (563)
0.068µF (683)
0.082µF (823)
0.10µF (104)
1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.
8. PACKAGING STYLE AND QUANTITY
Paper tape
Plastic tape
Size
Thickness (mm)/Symbol
7” reel
13” reel
7” reel
13” reel
0402 (1005)
0603 (1608)
0.50±0.05
N
10,000
50,000
-
-
0.80±0.07
0.80+0.15/-0.10
0.60±0.10
0.80±0.10
1.25±0.10
0.80±0.10
0.95±0.10
1.25±0.10
0.95±0.10
1.25±0.10
S
X
A
B
D
B
C
D
C
D
4,000
15,000
-
-
4,000
15,000
-
-
4,000
15,000
-
-
0805 (2012)
4,000
15,000
-
-
-
-
3,000
-
10,000
-
4,000
15,000
1206 (3216)
1210 (3225)
-
-
-
-
-
-
-
-
3,000
3,000
3,000
3,000
10,000
10,000
10,000
10,000
Unit: pieces
Page 6 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
9. RELIABILITY TEST CONDITIONS AND REQUIREMENTS
No.
Item
Test Condition
Requirements
1. Visual and
Mechanical
---
* No remarkable defect.
* Dimensions to conform to individual specification sheet.
2. Capacitance
3. Q/ D.F.
(Dissipation
Factor)
* Class I: (X8G)
* Shall not exceed the limits given in the detailed spec.
* X8G: Cap≥30pF, Q≥1000; Cap<30pF, Q≥400+20C
* X8R: D.F. ≤5%
Cap≤1000pF, 1.0±0.2Vrms, 1MHz±10%
Cap>1000pF, 1.0±0.2Vrms, 1KHz±10%
* Class II: (X8R)
1.0±0.2Vrms, 1kHz±10%
* Before initial measurement (Class II only): To apply de-aging
at 150°C for 1hr then set for 24±2 hrs at room temp .
* To apply voltage (≤100V) 250%.
4. Dielectric
Strength
* No evidence of damage or flash over during test.
* Duration: 1 to 5 sec.
* Charge and discharge current less than 50mA.
5. Insulation
Resistance
* To apply rated voltage for MAX. 120sec.
* 10GΩ or RxC≥500Ω-F whichever is smaller
6. Temperature
Coefficient
* With no electrical load.
T.C.
X8G
X8R
Operating Temp
-55~150°C at 25°C
-55~150°C at 25°C
T.C.
X8G
X8R
Capacitance Change
Within ±30ppm/°C
Within ±15%
* Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24± 2 hrs at
room temp.
7. Adhesive
Strength of
Termination
8. Vibration
Resistance
* Pressurizing force:
* No remarkable damage or removal of the terminations.
5N (≤0603) and 10N (>0603)
* Test time: 10±1 sec.
* Vibration frequency: 10~55 Hz/min.
* Total amplitude: 1.5mm
* No remarkable damage.
* Cap change and Q/D.F.: To meet initial spec.
* Test time: 6 hrs. (Two hrs each in three mutually
perpendicular directions.)
* Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24± 2 hrs at
room temp.
* Cap./DF(Q) Measurement to be made after de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.
* Solder temperature: 235±5°C
9. Solderability
95% min. coverage of all metalized area.
* Dipping time: 2±0.5 sec.
10. Bending Test * The middle part of substrate shall be pressurized by means * No remarkable damage.
of the pressurizing rod at a rate of about 1 mm per second until * Cap change:
the deflection becomes 1 mm and then the pressure shall be
maintained for 5±1 sec.
X8G: within ±5.0% or ±0.5pF whichever is larger.
X8R: within ±12.5%
* Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24± 2 hrs at
room temp.
(This capacitance change means the change of capacitance under
specified flexure of substrate from the capacitance measured before
the test.)
* Measurement to be made after keeping at room temp. for
24±2 hrs.
11. Resistance to * Solder temperature: 260±5°C
Soldering Heat * Dipping time: 10±1 sec
* Preheating: 120 to 150°C for 1 minute before imme rse the
capacitor in a eutectic solder.
* No remarkable damage.
* Cap change:
X8G: within ±2.5% or ±0.25pF whichever is larger.
X8R: within ±7.5%
* Before initial measurement (Class II only): To apply de-aging * Q/D.F., I.R. and dielectric strength: To meet initial requirements.
at 150°C for 1hr then set for 24±2 hrs at room temp .
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging
at 150°C for 1hr then set for 24±2 hrs at room temp .
* 25% max. leaching on each edge.
Page 7 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
No.
Item
Test Condition
Requirements
* Conduct the five cycles according to the temperatures and
time.
12. Temperature
Cycle
* No remarkable damage.
* Cap change:
Step
Temp. (°C)
Min. operating temp. +0/-3
Room temp.
Time (min.)
30±3
X8G: within ±2.5% or ±0.25pF whichever is larger.
X8R: within ±7.5%
1
2
3
4
2~3
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
Max. operating temp. +3/-0
Room temp.
30±3
2~3
*Before initial measurement (Class II only): To apply de-aging
at 150°C for 1hr then set for 24±2 hrs at room temp .
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging
at 150°C for 1hr then set for 24±2 hrs at room temp .
* Test temp.: 40±2°C
13. Humidity
(Damp Heat)
Steady State
* No remarkable damage.
* Humidity: 90~95% RH
* Cap change: X8G: within ±5.0% or ±0.5pF whichever is larger.
X8R: within ±12.5%
* Test time: 500+24/-0hrs.
* Before initial measurement (Class II only): To apply de-aging * Q/D.F. value:
at 150°C for 1hr then set for 24±2 hrs at room temp .
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging
at 150°C for 1hr then set for 24±2 hrs at room temp .
X8G: Cap≥30pF, Q≥350; 10pF≤Cap<30pF, Q≥275+2.5C
Cap<10pF; Q≥200+10C
X8R: ≤7.5%
* I.R.: ≥1GΩ or RxC≥50Ω-F whichever is smaller.
14. Humidity
(Damp Heat)
Load
* Test temp.: 40±2°C
* No remarkable damage.
* Humidity: 90~95%RH
* Cap change: X8G: within ±7.5% or ±0.75pF whichever is larger.
X8R: within ±12.5%
* Test time: 500+24/-0 hrs.
* To apply voltage:rated voltage
* Before initial measurement (Class II only): To apply de-aging
at 150°C for 1hr then set for 24±2 hrs at room temp .
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging
at 150°C for 1hr then set for 24±2 hrs at room temp .
* Test temp.:
* Q/D.F. value:
X8G: Cap≥30pF, Q≥200; Cap<30pF, Q≥100+10/3C
X8R: ≤7.5%
* I.R.: ≥500MΩ or RxC≥25Ω-F whichever is smaller.
15. High
Temperature
Load
* No remarkable damage.
X8G, X8R: 150±3°C
* Cap change: X8G: within ±3.0% or ±0.3pF whichever is larger.
X8R: within ±12.5%
* To apply voltage: 200% of rated voltage.
* Test time: 1000+24/-0 hrs.
(Endurance)
* Q/D.F. value:
* Before initial measurement (Class II only): To apply de-aging X8G: Cap≥30pF, Q≥350
at 150°C for 1hr then set for 24±2 hrs at room temp .
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.
10pF≤Cap<30pF, Q≥275+2.5C
Cap<10pF, Q≥200+10C
X8R: ≤7.5%
* I.R.: ≥1GΩ or RxC≥50Ω-F whichever is smaller.
Page 8 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
APPENDIXES
◙ Tape & reel dimensions
Fig. 2 The dimension of paper tape
Fig. 3 The dimension of plastic tape
Size
0402
N,E
0603
S,H,X
0805
B,T
1206
C,J,D
< 2.00
< 3.70
1210
C,D,G,K
< 3.05
A,H
D,I
B,T
G,P
<2.30
< 4.00
T
M
Thickness
0.70
+/-0.20
1.20
+/-0.20
1.05
+/-0.30
1.80
+/-0.30
1.50
+/-0.20
2.30
+/-0.20
1.50
+/-0.20
2.30
+/-0.20
1.90
+/-0.50
3.50
+/-0.50
< 1.80
< 2.70
< 3.05
< 3.80
< 3.20
<4.00
A0
B0
T
< 3.80
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
≦0.80
≦1.20
≦1.15
≦1.20
≦1.20
-
-
-
-
< 2.50
-
< 2.50
< 2.50
< 1.50
< 2.50
< 3.20
K0
W
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
P0
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
10xP0
P1
+/-0.10
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
2.00
+/-0.05
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
2.00
+/-0.05
P2
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
D0
D1
E
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
+0.1/-0
1.00
+/-0.10
1.75
+/-0.10
1.00
+/-0.10
1.75
+/-0.10
1.00
+/-0.10
1.75
+/-0.10
1.00
+/-0.10
1.75
+/-0.10
1.00
+/-0.10
1.75
+/-0.10
1.00
+/-0.10
1.75
+/-0.10
-
-
-
-
-
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
F
Size
0402, 0603, 0805, 1206, 1210
Reel size
7”
10”
13”
C
W1
A
13.0+0.5/-0.2
8.4+1.5/-0
13.0+0.5/-0.2
8.4+1.5/-0
250.0±1.0
100.0±1.0
13.0+0.5/-0.2
8.4+1.5/-0
330.0±1.0
100±1.0
178.0±1.0
N
60.0+1.0/-0
Fig. 4 The dimension of reel
Page 9 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
◙ Example of customer label
a. Customer name
b. WTC order series and item number
c. Customer P/O
d. Customer P/N
e. Description of product
f. Quantity
g. Bar code including quantity & WTC P/N or customer
h. WTC P/N
i. Shipping date
j. Order bar code including series and item numbers
k. Serial number of label
*Customized label is available upon request
◙ Constructions
No.
1
2
3
4
5
Name
X8G
X8R
BaTiO3 based
Ceramic material
Inner electrode
CaZrO3 based
Ni
Cu
Ni
Inner layer
Termination
Middle layer
Outer layer
Sn
Fig. 5 The construction of MLCC
◙ Storage and handling conditions
(1) To store products at 5 to 40°C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life
extension is needed.
Cautions:
a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.
Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide,
chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low
reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by
direct sunlight, the solderability and electrical performance may deteriorate. Do not store capacitors under
direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.
Page 10 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
Multilayer Ceramic Capacitors
Approval Sheet
◙ Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable
against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and
concentration of N2 within oven are recommended.
Fig. 6 Recommended reflow soldering profile for SMT process
with SnAgCu series solder paste.
Fig. 7 Recommended wave soldering profile for SMT process
with SnAgCu series solder.
Page 11 of 11
ASC_High Temperature Cap_(HT)_026B_AS
Dec. 2018
HT15R100K160CG 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
HT15R100K160CT | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100K250CG | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100K250CT | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100K500CG | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100K500CT | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100M100CG | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100M100CT | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100M101CG | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100M101CT | WALSIN | Halogen Free & RoHS Compliance | 获取价格 | |
HT15R100M160CG | WALSIN | Halogen Free & RoHS Compliance | 获取价格 |
HT15R100K160CG 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6