MK08S472-DTL [WALSIN]
Power rating and compact size;型号: | MK08S472-DTL |
厂家: | Walsin Technology |
描述: | Power rating and compact size |
文件: | 总7页 (文件大小:269K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Approval sheet
MK06S, MK08S
±0.5%, ±1%, ±5%
Thick Film Power Surge Chip Resistors
High Grade AEC Q200 Qualified
Anti-Sulfuration
Size 0603, 0805
*Contents in this sheet are subject to change without prior notice.
Page 1 of 7
ASC_MKxxS_AUTO_V02
OCT 2016
Approval sheet
FEATURE
1. Power rating and compact size
2. High reliability and stability
3. Reduced size of final equipment
4. High anti-surge protection
5. Halogen free
6. Automotive high grade AEC Q-200 qualified
7. Anti-sulfuration against ASTM B-809 60’C, 95% RH, 1000hrs
APPLICATION
•
•
•
•
Power supply
Measurement instrument
Automotive industry
Medical or Military equipment
DESCRIPTION
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal electrodes are added at
each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition
of the paste is adjusted to request resistance to nominal value within tolerance which controlled by printing
process in this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For
ease of soldering the outer layer of these end terminations is a Tin (Pb free) alloy.
Fig 1. Construction of Chip-R MKxxS
Page 2 of 7
ASC_MKxxS_AUTO_V02
OCT 2016
Approval sheet
QUICK REFERENCE DATA
Item
Series No.
General Specification
MK06S
General Specification
MK08S
0603 (1608)
0805 (2012)
Size code
Resistance Tolerance
±0.5% ±1%, (E24+E96)
±5%, (E24)
±0.5% ±1%, (E24+E96)
±5%, (E24)
Resistance Range
1Ω ~ 1MΩ
1Ω ~ 1MΩ
TCR (ppm/°C)
± 100 ppm /°C
± 200 ppm /°C
1/4W
± 100 ppm /°C
± 200 ppm /°C
1/3W
10Ω ~ 1MΩ
1Ω ~ 9.76Ω
Max. dissipation at Tamb=70°C
Max. Operation Voltage
Max. Overload Voltage
Operation temperature
150V
300V
200V
400V
- 55 ~ +155’C
- 55 ~ +155’C
Note :
1.
This is the maximum voltage that may be continuously supplied to the resistor element, see “IEC publication
60115-8”
2.
Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by
or Max. RCWV listed above, whichever is lower.
RCWV = RatedPower ×ResistanceValue
MECHANICAL DATA(unit : mm)
1 0 1
Symbol
MK06S
MK08S
L
W
T
1.60 ± 0.10
2.00 ± 0.10
1.25 ± 0.10
0.55 ± 0.10
0.30 ± 0.20
0.40 ± 0.20
0.80 +0.15/-0.05
0.45 ± 0.10
0.25 ± 0.10
0.30 ± 0.10
Tt
Tb
Page 3 of 7
ASC_MKxxS_AUTO_V02
OCT 2016
Approval sheet
MARKING
1.
For 0805, each resistor is marked with 3 digits or 4 digits on the protective coating to
designate the nominal resistance value. E24 series: 3 digits; E96 series: 4 digits. In case
E96 overlaps with E24, 3 digits should be marked.
2.
3.
For 0603 E24, each resistor is marked with 3 digits. No marking for E96!
Example as below
Single pulse limiting power chart
MK06S Surge resistor single pulse chart
1000
100
10
MK06S
1
0.001
0.01
0.1
1
10
100
1000
Duration time (msec)
De-rating curve
The power that the resistor can dissipate depends on the operating temperature; see Fig.2
Page 4 of 7
ASC_MKxxS_AUTO_V02
OCT 2016
Approval sheet
MOUNTING
Due to their rectangular shapes and small tolerances, Surface Mountable Resistors are suitable for handling by
automatic placement systems.
Chip placement can be on ceramic substrates and printed-circuit boards (PCBs).
Electrical connection to the circuit is by individual soldering condition.
The end terminations guarantee a reliable contact.
SOLDERING CONDITION
The robust construction of chip
resistors allows them to be completely
immersed in a solder bath of 260°C for
10 seconds. Therefore, it is possible to
mount Surface Mount Resistors on one
side of a PCB and other discrete
components on the reverse (mixed
PCBs).
Surface Mount Resistors are tested for
solderability at 235°C during 2 seconds.
The test condition for no leaching is
260°C for 30 seconds. Typical
examples of soldering processes that
provide reliable joints without any
damage are given in Fig 3.
Fig 3. Infrared soldering profile for Chip Resistors
CATALOGUE NUMBERS
The resistors have a catalogue number starting with .
MK06
S
472_
J
T
L
Size code
Type code
Resistance code
Tolerance
J: ±5%
Packaging code
Termination code
MK06 : 0603
MK08: 0805
E24 :
3
significant
T
: 7” Reeled
taping
S
: surge
L
= Sn base (lead
digits followed by
no. of zeros and a
blank
free)
F: ±1%
D: ±0.5%
472 = 4K7
Taping quantity
-
0603/0805 Chip resistors 5,000 pcs paper tape per 7” reel.
Page 5 of 7
ASC_MKxxS_AUTO_V02
OCT 2016
Approval sheet
TEST AND REQUIREMENTS(JIS C 5201-1 : 1998)
TEST
PROCEDURE
REQUIREMENT
High temperature
exposure
155ºC, no load, 1000hours
∆R/R max. ±(1%+0.05Ω)
no visible damage
MIL-STD-202 method
108
30 minutes at -55°C±3°C, 2~3 minutes at 20°C+5°C-1°C, 30
minutes at +155°C±3°C, 2~3 minutes at 20°C+5°C-1°C, total
1000 cycles
no visible damage
Temperature cycling
AEC Q200-4
∆R/R max. ±(0.5%+0.05Ω)
Bias Humidity
1000 hours, at 10% rated continuous power in humidity
∆R/R max. ±(1%+0.05Ω)
chamber controller at 85°C±2°C and 85% relative humidity,
MIL-STD-202 method
103
no visible damage
Operational Life
MIL-STD-202 method
108
1000+48/-0 hours; 35% of operation power, 125±2°C
∆R/R max. ±(1%+0.05Ω)
no visible damage
Solvent: 2−propanol at 25℃
Immersion time: 3 min
Brush: 10 times brushing
Resistance to Solvent
MIL-STD-202 method
215
∆R/R max. ±(0.5%+0.05Ω)
no visible damage
Immersion and brush cycle: 3cycle
Mechanical Shock
MIL-STD-202 method
213
Waveform: half sine,
Peak value100G,
Normal duration 6ms
Condition: XX'YY'ZZ', 10times each
Peak acceleration and Sweep time: 5 g's for 20
min , Frequency 10Hz to 2000Hz,
Condition: 12 cycles each of 3 orientations
∆R/R max. ±(0.5%+0.05Ω)
no visible damage
Vibration
MIL-STD-202 method
204
∆R/R max. ±(0.5%+0.05Ω)
no visible damage
Un-mounted chips completely immersed for 10±1second in a
solder bath at 260℃±5ºC
Resistance to soldering
heat (R.S.H) MIL-STD-
202 method 210
∆R/R max. ±(0.5%+0.05Ω)
no visible damage
Human body model, 2 Kohm, 150 pF,
Test voltage: 2KV
ESD test
∆R/R max. ±(1%+0.05Ω)
no visible damage
JIS-STD-002
a) Bake the sample for 155 ºC dwell time 4hrs /
solder dipping 235ºC/ 5s. Solder: Sn96.5-Ag3-Cu0.5
b) Solder dipping 215ºC/ 5s. Solder: Sn63Pb37
good tinning (>95% covered)
no visible damage
Solderability
JIS-STD-002
c) Solder dipping 260ºC/ 7s.
Natural resistance change per change in degree centigrade.
Refer to “QUICK
REFERENCE DATA”
Temperature Coefficient
of Resistance(T.C.R)
R2 − R
×106 (ppm/°C) t1 : 20°C+5°C-1°C
1
Clause 4.8
R
(
t2 − t1
)
1
R1 : Resistance at reference temperature
R2 : Resistance at test temperature +155’C
Bending strength
Resistors mounted on a 90mm glass epoxy resin PCB(FR4);
bending : 2 mm, once for 60 seconds
∆R/R max. ±(0.5%+0.05Ω)
no visible damage
AEC Q200-005
Adhesion
Pressurizing force: 10N for 0603; 17.7N for 0805,
∆R/R max. ±(0.5%+0.05Ω)
AEC Q200-006
Test time: 60±1sec.
No remarkable damage or
removal of the terminations
ASTM B-809-95
Sulfur vapor
Test temp.: 60°C
Relative humidity: 95%
Sulfuration test
ASTM B-809-95
∆R/R max. ±(1%+0.05Ω)
no visible damage
Test period: 1000h
Page 6 of 7
ASC_MKxxS_AUTO_V02
OCT 2016
Approval sheet
PACKAGING
Tape specifications (unit :mm)
Series No.
MK06S
A
B
W
F
E
1.90±0.20
1.15±0.15
8.00±0.30
3.50±0.05
1.75±0.10
2.50±0.20
1.65±0.15
8.00±0.30
3.50±0.05
1.75±0.10
MK08S
Series No.
MK06S
P1
P0
T
ΦD
+0.1
4.00±0.10
4.00±0.10
Max. 0.8
Φ1.50
−0.0
+0.1
−0.0
4.00±0.10
4.00±0.10
MK08S
Max. 1.0
Φ1.50
Reel dimensions
Reel / Tape
7” reel for 8mm tape
A
B
C
D
13.0±0.2
9+1.0/0
Φ180.0+0/-1.5
Φ60.0+1/0
Taping quantity
- 0603/0805 Chip resistors 5,000 pcs paper tape per 7” reel.
Page 7 of 7
ASC_MKxxS_AUTO_V02
OCT 2016
相关型号:
©2020 ICPDF网 联系我们和版权申明