RFLPF10050G9D0T [WALSIN]

850/900 MHz GSM Band RF Application;


型号：	RFLPF10050G9D0T
厂家：	Walsin Technology
描述：	850/900 MHz GSM Band RF Application GSM
文件：	总7页 (文件大小：529K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Approval sheet

MULTILAYER CERAMIC LOW PASS FILTER

RFLPF Series – 1005(0402)- RoHS Compliance

Halogens Free Product

850/900 MHz GSM Band RF Application

P/N: RFLPF10050G9D0T

*Contents in this sheet are subject to change without prior notice.

Page 1 of 7

ASC_RFLPF10050G9D0T_V03

Jul. 2017

Approval sheet

FEATURES

Miniature footprint: 1.0 X 0.5 X 0.4 mm³

Low Profile Thickness

Low Insertion loss

High Rejection Rate

High Attenuation on harmonic Suppressed

LTCC process

APPLICATIONS

1. 824 ~ 915 MHz band RF applications

2. GSM related applications

CONSTRUCTION

Connection

Input port

GND

Output port

GND

DIMENSIONS

Figure

Symbol

Dimension (mm)

1.00 ± 0.10

0.50 ± 0.10

0.40 ± 0.10

0.35 ± 0.10

0.30 ± 0.10

0.15 ± 0.10

0.30 ± 0.10

Page 2 of 7

ASC_RFLPF10050G9D0T_V03

Jul. 2017

Approval sheet

ELECTRICAL CHARACTERISTICS

RFLPF10050G9D0T

Specification

Frequency range

824~915 MHz

0.65 dB max. at +25C

Insertion Loss

Attenuation

0.85 dB max. at -40C ~ +85C

25 dB min. @ 1648~1830 MHz

25 dB min. @ 2472~2745 MHz

25 dB min. @ 3296~ 3660 MHz

2.0 max

VSWR

50 Ω

Impedance

Power Capacity

2W max.

LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)

Moisture sensitivity levels

Operating & Storage Condition (Component)

Operation Temperature Range: -40C ~ +85C

Storage Temperature Range: -40C ~ +85C

Storage Condition before Soldering (Included packaging material)

Storage Temperature Range: +5 ~ +40 ℃

Humidity: 30 to 70% relative humidity

Typical Electrical Chart

SOLDER LAND PATTERN

Figure

Unit : mm

Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.

Page 3 of 7

ASC_RFLPF10050G9D0T_V03

Jul. 2017

Approval sheet

RELIABILITY TEST

Test condition / Test method

Test item

Specification

Solderability

At least 95% of a surface of each terminal

electrode must be covered by fresh solder.

*Solder bath temperature：235  5C

*Immersion time：2  0.5 sec

Solder：Sn3Ag0.5Cu for lead-free

*Solder bath temperature：260  5C

*Leaching immersion time：30  0.5 sec

Solder : SN63A

JIS C 0050-4.6

JESD22-B102D

Leaching

Loss of metallization on the edges of each

electrode shall not exceed 25%.

(Resistance to dissolution

of metallization)

IEC 60068-2-58

Resistance to soldering heat

JIS C 0050-5.4

*Preheating temperature：120~150℃,

1 minute.

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Solder temperature：2705C

*Immersion time：101 sec

Solder：Sn3Ag0.5Cu for lead-free

Loss of metallization on the edges of each

electrode shall not exceed 25%.

Measurement to be made after keeping at

room temperature for 242 hrs

Drop Test

*Height：75 cm

No mechanical damage.

JIS C 0044

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Test Surface：Rigid surface of concrete

Customer’s specification.

or steel.

*Times：6 surfaces for each units；2

times for each side.

Vibration

*Frequency：10Hz~55Hz~10Hz(1min)

No mechanical damage.

JIS C 0040

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Total amplitude：1.5mm

*Test times：6hrs.(Two hrs each in three

mutually perpendicular directions)

Adhesive Strength

of Termination

*Pressurizing force：

No remarkable damage or removal of the

termination.

5N(≦0603)；10N(>0603)

JIS C 0051- 7.4.3

*Test time：10±1 sec

Page 4 of 7

ASC_RFLPF10050G9D0T_V03

Jul. 2017

Approval sheet

Bending test

The middle part of substrate shall be

pressurized by means of the pressurizing

rod at a rate of about 1 mm/s per second

until the deflection becomes 1mm/s and

then pressure shall be maintained for 51

sec.

No mechanical damage.

JIS C 0051- 7.4.1

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

Measurement to be made after keeping at

room temperature for 242 hours

1. 303 minutes at -40C3C,

Temperature cycle

JIS C 0025

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics

under the operational temperature range

within -40 ~ 85°C.

2. 10~15 minutes at room temperature,

3. 303 minutes at +85C3C,

4. 10~15 minutes at room temperature,

Total 100 continuous cycles

Measurement to be made after keeping at

room temperature for 242 hrs

*Temperature：85C2C

High temperature

JIS C 0021

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Test duration：1000+24/-0 hours

Measurement to be made after keeping at

room temperature for 242 hrs

Humidity

*Humidity：90% to 95% R.H.

*Temperature：402C

*Time：1000+24/-0 hrs.

No mechanical damage.

(steady conditions)

JIS C 0022

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

Measurement to be made after keeping at

room temperature for 242 hrs

※ 500hrs measuring the first data then

1000hrs data

Low temperature

JIS C 0020

*Temperature：-40C2C

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Test duration：1000+24/-0 hours

Measurement to be made after keeping at

room temperature for 242 hrs

Page 5 of 7

ASC_RFLPF10050G9D0T_V03

Jul. 2017

Approval sheet

SOLDERING CONDITION

Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,

Fig 2. Infrared soldering profile

ORDERING CODE

Walsin

RF device

LPF

1005

0G9

Central

Frequency

Product Code

LPF :

Dimension code

Application

Specification

Design code

Packing

T : Reeled

Per 2 digits of

Length, Width,

Thickness :

D :GSM900 /

DCS1800

0G9 :0.9 GHz

Low Pass Filter

e.g. :

1005 =

Length 10,

Width 5,

Minimum Ordering Quantity: 4000 pcs per reel.

PACKAGING

Paper Tape specifications (unit :mm)

Index

D

Dimension (mm)

Index

1.50 + 0.10

0.67  0.10

1.14  0.10

0.42  0.10

8.0  0.30

Dimension (mm)

1.75  0.10

3.50  0.20

4.00  0.10

2.00  0.10

Page 6 of 7

ASC_RFLPF10050G9D0T_V03

Jul. 2017

Approval sheet

Reel dimensions

Index

Φ178.0

Φ60.0

Φ13.0

Dimension (mm)

Taping Quantity: 4000 pieces per 7” reel

CAUTION OF HANDLING

Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high reliability for

the prevention of defects, which might directly cause damage to the third party’s life, body or property.

(1) Aircraft equipment

(2) Aerospace equipment

(3) Undersea equipment

(4) Medical equipment

(5) Disaster prevention / crime prevention equipment

(6) Traffic signal equipment

(7) Transportation equipment (vehicles, trains, ships, etc.)

(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.

Storage condition

(1) Products should be used in 6 months from the day of WALSIN outgoing inspection.

(2) Storage environment condition.



Products should be storage in the warehouse on the following conditions.

Temperature

Humidity

: +5 to +40℃

: 30 to 70% relative humidity

Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of

electrode, resulting in poor solderability.



Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.

Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.

Products should be storage under the airtight packaged condition.

Page 7 of 7

ASC_RFLPF10050G9D0T_V03

Jul. 2017

RFLPF10050G9D0T [WALSIN]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB