RFLPF10050G9D4T [WALSIN]
850/900 MHz GSM Band Working Frequency;
| 型号： | RFLPF10050G9D4T |
| 厂家： | 
Walsin Technology |
| 描述： | 850/900 MHz GSM Band Working Frequency GSM |
| 文件： | 总7页 (文件大小：755K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Approval sheet
MULTILAYER CERAMIC LOW PASS FILTER
RFLPF Series – 1005(0402)- RoHS Compliance
Halogens Free Product
850/900 MHz GSM Band Working Frequency
P/N: RFLPF10050G9D4T
*Contents in this sheet are subject to change without prior notice.
Page 1 of 7
ASC_RFLPF10050G9D4T_V01
Feb. 2014
Approval sheet
FEATURES
1.
2.
3.
4.
5.
6.
Miniature footprint: 1.0 X 0.5 X 0.4 mm3
Low Profile Thickness
Low Insertion loss
High Rejection Rate
High Attenuation on harmonic Suppressed
LTCC process
APPLICATIONS
1. 699~915MHz band RF applications
2. GSM related applications
CONSTRUCTION
P4
Top view
P1
PIN
1
Connection
Input port
GND
P3
2
3
Output port
GND
4
P2
DIMENSIONS
Figure
Symbol
Dimension (mm)
L
W
T
1.00 ± 0.10
0.50 ± 0.10
0.40 ± 0.10
0.35 ± 0.10
0.30 ± 0.10
0.15 ± 0.10
0.15 ± 0.10
0.30 ± 0.10
Top view
A
B
C
D
Bottom view
Side view
Side view
E
Page 2 of 7
ASC_RFLPF10050G9D4T_V01
Feb. 2014
Approval sheet
ELECTRICAL CHARACTERISTICS
RFLPF10050G9D4T
Specification
Frequency range
699~915MHz
0.5 dB max. at 25 °C
0.7 dB max. at – 40 ~ + 85 °C
Insertion Loss
VSWR
2.0 max
50 Ω
Impedance
25 dB @ 1648 ~ 1830 MHz
25 dB @ 2472 ~ 2745 MHz
25 dB @ 3296 ~ 3660 MHz
-40°C ~ +85°C
Attenuation (min.)
Operation Temperature Range
Typical Electrical Chart
0
-10
-20
-30
-40
-50
dB(S(2,1))
dB(S(1,1))
-60
0
1
2
3
4
Frequency (GHz)
SOLDER LAND PATTERN
Figure
Unit : mm
Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 3 of 7
ASC_RFLPF10050G9D4T_V01
Feb. 2014
Approval sheet
RELIABILITY TEST
Test condition / Test method
Test item
Specification
Solderability
At least 95% of a surface of each terminal
*Solder bath temperature：235 ± 5°C
JIS C 0050-4.6
JESD22-B102D
electrode must be covered by fresh solder.
*Immersion time：2 ± 0.5 sec
Solder：Sn3Ag0.5Cu for lead-free
*Solder bath temperature：260 ± 5°C
*Leaching immersion time：30 ± 0.5 sec
Solder : SN63A
Leaching
Loss of metallization on the edges of each
electrode shall not exceed 25%.
(Resistance to
dissolution of
metallization)
IEC 60068-2-58
Resistance to soldering
heat
*Preheating temperature：120~150℃,
1 minute.
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
JIS C 0050-5.4
*Solder temperature：270±5°C
*Immersion time：10±1 sec
Solder：Sn3Ag0.5Cu for lead-free
Loss of metallization on the edges of each
electrode shall not exceed 25%.
Measurement to be made after keeping at
room temperature for 24±2 hrs
Drop Test
*Height：75 cm
No mechanical damage.
JIS C 0044
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test Surface：Rigid surface of concrete or
Customer’s specification.
steel.
*Times：6 surfaces for each units；2 times
for each side.
Vibration
*Frequency：10Hz~55Hz~10Hz(1min)
*Total amplitude：1.5mm
No mechanical damage.
JIS C 0040
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test times：6hrs.(Two hrs each in three
mutually perpendicular directions)
Adhesive Strength
of Termination
*Pressurizing force：
No remarkable damage or removal of the
termination.
5N(≦0603)；10N(>0603)
JIS C 0051- 7.4.3
*Test time：10±1 sec
Bending test
The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1 mm/s per second until the
deflection becomes 1mm/s and then pressure
shall be maintained for 5±1 sec.
No mechanical damage.
JIS C 0051- 7.4.1
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
Measurement to be made after keeping at
room temperature for 24±2 hours
Page 4 of 7
ASC_RFLPF10050G9D4T_V01
Feb. 2014
Approval sheet
Temperature cycle
JIS C 0025
1. 30±3 minutes at -40°C±3°C,
2. 10~15 minutes at room temperature,
3. 30±3 minutes at +85°C±3°C,
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics
under the operational temperature range
within -40 ~ 85°C.
4. 10~15 minutes at room temperature,
Total 100 continuous cycles
Measurement to be made after keeping at
room temperature for 24±2 hrs
High temperature
JIS C 0021
*Temperature：85°C±2°C
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test duration：1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 24±2 hrs
Humidity
*Humidity：90% to 95% R.H.
*Temperature：40±2°C
*Time：1000+24/-0 hrs.
No mechanical damage.
(steady conditions)
JIS C 0022
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
Measurement to be made after keeping at
room temperature for 24±2 hrs
※500hrs measuring the first data then
1000hrs data
Low temperature
JIS C 0020
*Temperature：-40°C±2°C
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test duration：1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 24±2 hrs
Page 5 of 7
ASC_RFLPF10050G9D4T_V01
Feb. 2014
Approval sheet
SOLDERING CONDITION
Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2.
Fig 2. Infrared soldering profile
ORDERING CODE
RF
Walsin
RF device
LPF
1005
0G9
Central
Frequency
D
4
T
Product Code
LPF :
Dimension code
Application
Specification
Design code
Packing
T : Reeled
Per 2 digits of
Length, Width,
Thickness :
D :GSM900 /
DCS1800
0G9 :0.9 GHz
Low Pass Filter
e.g. :
1005 =
Length 1.0 mm,
Width 0.5mm
Minimum Ordering Quantity: 4000 pcs per reel.
PACKAGING
Paper Tape specifications (unit :mm)
Index
Ao
Bo
T
W
ΦD
Dimension (mm)
Index
1.50 + 0.10
Po
0.70 ± 0.10
E
1.15 ± 0.10
F
0.40 ± 0.10
P1
8.0 ± 0.30
P2
Dimension (mm)
1.75 ± 0.10
3.50 ± 0.20
4.00 ± 0.10
2.00 ± 0.10
2.00 ± 0.10
Page 6 of 7
ASC_RFLPF10050G9D4T_V01
Feb. 2014
Approval sheet
Reel dimensions
B
A
C
Index
A
B
C
Φ178.0
Φ60.0
Φ13.0
Dimension (mm)
Taping Quantity: 4000 pieces per 7” reel
CAUTION OF HANDLING
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Medical equipment
(5) Disaster prevention / crime prevention equipment
(6) Traffic signal equipment
(7) Transportation equipment (vehicles, trains, ships, etc.)
(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.
Storage condition
(1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be
confirmed.
(2) Storage environment condition.
¢
¢
¢
¢
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
: -10 to +40℃
: 30 to 70% relative humidity
Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of
electrode, resulting in poor solderability.
¢
¢
¢
Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
Page 7 of 7
ASC_RFLPF10050G9D4T_V01
Feb. 2014
相关型号：
©2020 ICPDF网 联系我们和版权申明