SG21B104M250CG [WALSIN]
Available for any item in standard series range;型号: | SG21B104M250CG |
厂家: | Walsin Technology |
描述: | Available for any item in standard series range |
文件: | 总16页 (文件大小:4055K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Multilayer Ceramic Capacitors
Approval Sheet
MULTILAYER CERAMIC CAPACITORS
Soft Termination Series
(SG_6.3V to 3000V)
X7R Dielectric
0603 to 1206 Sizes
Halogen Free & RoHS Compliance
*Contents in this sheet are subject to change without prior notice.
Page 1 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
1. INTRODUCTION
WTC soft termination series MLCC is designed and with a polymer layer within end terminations of product, which
can absorb mechanical stress caused by PCB handling in SMT line and reduce the mechanical impact for product. It will
offer more robust and reliable performance in applications.
2. FEATURES
3. APPLICATIONS
a. MLCC’s termination are with a soft & flexible
polymer layer to withstand high bending stress in SMT
line.
a. Automotive industry.
b. Power supply and related industries.
c. Lighting industry.
b. Available for any item in standard series range.
d. The other mechanical stress concerned products.
4. HOW TO ORDER
SG
31
B
104
K
500
C
T
Series
Size
Dielectric
Capacitance
Tolerance
Rated voltage
Termination
Packaging
SG=Soft
18=0603 (1608) B=X7R
21=0805 (2012)
Two significant
K=±10%
Two significant
C=Cu Polymer T=7” reeled
termination
digits followed by M=±20%
no. of zeros. And
R is in place of
decimal point.
Eg.
digits followed by /Ni/Sn
no. of zeros. And
R is in place of
G=13” reeled
31=1206 (3216)
decimal point.
104=10x104
6R3=6.3 VDC
100=10 VDC
160=16 VDC
250=25 VDC
500=50 VDC
101=100 VDC
201=200 VDC
251=250 VDC
401=400 VDC
451=450 VDC
501=500 VDC
631=630 VDC
102=1000 VDC
152=1500 VDC
202=2000 VDC
=100nF
Page 2 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
5. EXTERNAL DIMENSIONS & CONSTRUCTIONS
Size
Inch (mm)
L (mm)
W (mm)
T (mm)/Symbol
Remark
MB (mm)
L
1.60±0.20
1.60±0.30
0.80±0.10
0.80±0.30
0.80±0.07
S
0603 (1608)
0.40±0.15
T
0.80±0.30
0.60±0.10
0.80±0.10
1.25±0.10
1.25±0.30
0.80±0.10
X
A
B
D
I
2.00±0.20
2.00±0.30
1.25±0.10
1.25±0.30
W
0805 (2012)
1206 (3216)
0.50±0.20
#
#
MB
MB
B
Fig. 1 The outline of MLCC
0.95±0.10
1.15±0.15
1.25±0.10
1.60±0.20
1.60±0.50
C
J
#
#
#
#
#
3.20+0.4/-0.1
1.60±0.15
0.60±0.20
(0.5±0.25)*
D
G
P
3.20+0.4/-0.1
3.20±0.50
1.60±0.20
1.60±0.50
# Reflow soldering only is recommended.
* For 1206_ 1000V products.
≧
6. GENERAL ELECTRICAL DATA
Dielectric
X7R
Size
0603, 0805, 1206
100pF to 1µF
Capacitance range*
K (±10%), M (±20%)
Capacitance tolerance**
Rated voltage (WVDC)
Operating temperature
Capacitance characteristic
Termination
6.3V to 2000V
-55 to +125°C
±15%
Ni/Sn (lead-free termination)
* Measured at the condition of 30~70% related humidity.
NP0: Apply 1.0±0.2Vrms, 1.0MHz±10% for Cap≤1000pF and 1.0±0.2Vrms, 1.0kHz±10% for Cap>1000pF, 25°C at ambient temperature
X7R, X5R: Apply 1.0±0.2Vrms, 1.0kHz±10%, at 25°C am bient temperature.
** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour, then leave in a mbient condition for 24±2 hours
before measurement.
Page 3 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
7. CAPACITANCE RANGE
X7R Dielectric 0402, 0603 Sizes
DIELECTRIC
SIZE
X7R
0603
50
S
RATED VOLTAGE
100pF (101)
10
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
16
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
25
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
100
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
X
X
X
X
X
X
200
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
250
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
120pF (121)
S
150pF (151)
S
180pF (181)
S
220pF (221)
S
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
2,700pF (272)
3,300pF (332)
3,900pF (392)
4,700pF (472)
5,600pF (562)
6,800pF (682)
8,200pF (822)
0.010µF (103)
0.012µF (123)
0.015µF (153)
0.018µF (183)
0.022µF (223)
0.027µF (273)
0.033µF (333)
0.039µF (393)
0.047µF (473)
0.056µF (563)
0.068µF (683)
0.082µF (823)
0.10µF (104)
0.12µF (124)
0.15µF (154)
0.18µF (184)
0.22µF (224)
0.27µF (274)
0.33µF (334)
0.39µF (394)
0.47µF (474)
0.56µF (564)
0.68µF (684)
0.82µF (824)
1.0µF (105)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
X
1.5µF (155)
2.2µF (225)
4.7µF (475)
1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.
X7R Dielectric 0805 Size
Page 4 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
DIELECTRIC
SIZE
X7R
0805
RATED VOLTAGE
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
2,700pF (272)
3,300pF (332)
3,900pF (392)
4,700pF (472)
5,600pF (562)
6,800pF (682)
8,200pF (822)
0.010µF (103)
0.012µF (123)
0.015µF (153)
0.018µF (183)
0.022µF (223)
0.027µF (273)
0.033µF (333)
0.039µF (393)
0.047µF (473)
0.056µF (563)
0.068µF (683)
0.082µF (823)
0.10µF (104)
0.12µF (124)
0.15µF (154)
0.18µF (184)
0.22µF (224)
0.27µF (274)
0.33µF (334)
0.39µF (394)
0.47µF (474)
0.56µF (564)
0.68µF (684)
0.82µF (824)
1.0µF (105)
10
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
I
16
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
I
25
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
I
50
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
I
100
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
I
200
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
250
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
500
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
D
D
D
630
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
D
D
1000
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
1.5µF (155)
2.2µF (225)
3.3µF (335)
4.7µF (475)
10µF (106)
22µF (226)
47µF (476)
1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.
Page 5 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
X7R Dielectric 1206 Size
DIELECTRIC
SIZE
X7R
1206
RATED VOLTAGE
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
2,700pF (272)
3,300pF (332)
3,900pF (392)
4,700pF (472)
5,600pF (562)
6,800pF (682)
8,200pF (822)
0.010µF (103)
0.012µF (123)
0.015µF (153)
0.018µF (183)
0.022µF (223)
0.027µF (273)
0.033µF (333)
0.039µF (393)
0.047µF (473)
0.056µF (563)
0.068µF (683)
0.082µF (823)
0.10µF (104)
0.12µF (124)
0.15µF (154)
0.18µF (184)
0.22µF (224)
0.27µF (274)
0.33µF (334)
0.39µF (394)
0.47µF (474)
0.56µF (564)
0.68µF (684)
0.82µF (824)
1.0µF (105)
10
16
25
50
100
200
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
G
250
400
450
500
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
630
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
1000 1500 2000
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
G
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
G
G
G
G
G
G
G
G
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
G
G
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
C
C
C
C
C
C
J
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
C
C
C
C
C
C
J
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
C
C
C
C
C
J
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
C
C
C
D
D
P
P
P
P
P
P
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
G
P
P
P
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
1.5µF (155)
2.2µF (225)
3.3µF (335)
4.7µF (475)
10µF (106)
22µF (226)
47µF (476)
1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.
Page 6 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
8. PACKAGING STYLE AND QUANTITY
Paper tape
Plastic tape
Size
Thickness (mm)/Symbol
7” reel
13” reel
7” reel
13” reel
0.80±0.07
0.80±0.30
0.60±0.10
0.80±0.10
1.25±0.10
1.25±0.30
0.80±0.10
0.95±0.10
1.15±0.15
1.25±0.10
1.60±0.20
1.60±0.50
S
X
A
B
D
I
B
C
J
4k
4k
4k
4k
-
-
4k
-
-
-
-
-
15k
15k
15k
15k
-
-
-
-
-
-
3k
3k
-
3k
3k
3k
2k
2k
-
-
-
-
0603 (1608)
0805 (2012)
1206 (3216)
10k
10k
-
10k
10k
10k
10k
9k
15k
-
-
-
-
-
D
G
P
Unit: pieces
Page 7 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
9. RELIABILITY TEST CONDITIONS AND REQUIREMENTS
No.
1.
Item
Test Condition
Requirements
Visual and
Mechanical
---
* No remarkable defect.
* Dimensions to conform to individual specification sheet.
* Shall not exceed the limits given in the detailed spec.
Class I: (NP0)
1000pF, 1.0±0.2Vrms,1MHz±10%
2. Capacitance
3. Q/ D.F.
(Dissipation
Factor)
C
≦
NP0: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C
C>1000pF, 1.0±0.2Vrms,1KHz±10%
Class II: (X7R, X7E, X6S, X5R,X7S,Y5V)
≦10µF, 1.0±0.2Vrms,1KHz±10% **
X7R,X5R,X6S,X7S:
Rated D.F.≦ Exception of D.F. ≦
C
vol.
C>10µF, 0.5±0.2Vrms,120Hz±20%
≦3%
1206≧0.47µF
0805>0.1µF;0603≧0.068µF;1206>1µF;1210≧2.2µF;TT series
≧100V ≦2.5% ≦5%
≦10% 0805>0.22µF;1210≧3.3µF
** Test condition: 0.5±0.2Vrms,1KHz±10%
X7R:
0805=106(6.3V), 0603/475(6.3V)
≦3%
≦5%
0201(50V);0603≧0.047µF;0805≧0.18µF;1206≧0.47µF
0201≧0.01uF;1210≧4.7µF
0402≧0.012µF; 0603>0.1µF; 0805≧1µF(0805/X7R>0.47µF);
1206≧2.2µF; 1210≧10µF; TT series
50V
35V
≦2.5%
≦10%
X5R:
#1
≦3.5% ≦10% 0603≧1µF;0805≧2.2µF;1206≧2.2µF;1210≧10µF
0201≧
224 (6.3V,10V,16V)
475 (6.3V,16V), 0402
,
≧
≦5%
≦7%
0201≧0.01µF;0805≧1µF;1210≧10µF
0603≧0.33µF
0201≧0.1µF;0402≧0.10µF&(0402/X7R≧0.056µF);TT series;
0603≧0.47µF;0805≧2.2µF;1206≧4.7µF;1210≧22µF
0402≧
225(10V),
0603=106 (6.3V,10V),
25V
16V
≦3.5%
≦3.5%
TT18X≧475(10V) , TT15X series
≦10%
X6S:
0201/474(4V),0201
0402 225 (6.3V),
≦12.5% 0402≧0.47µF
#1
≧104 (6.3V,10V ),
0201≧0.01µF;0402≧0.033µF;0603≧0.15µF;
0805≧0.68µF;1206≧2.2µF;1210≧4.7µF
0201≧0.1uF(0201/X7R≧0.022µF);0402≧0.22uF;TT series
0603≧0.68µF;0805≧2.2µF;1206≧4.7µF;1210≧22µF
≦5%
≧
0402/475 (10V), 0603/106 (6.3V),
≦10%
≦10%
X7S:
0402/225(6.3V)
0201≧0.012µF;0402≧0.33µF(0402/X7R≧0.22µF);TT series
0603≧0.33µF;0805≧2.2µF;1206≧2.2µF;1210≧22µF;01R5
10V
≦5%
≦15% 0201≧0.1µF; 0402≧1µF
0201≧0.1µF;0402≧1µF(0402/X6S
0805≧4.7µF;1206≧47µF;1210≧100µF;TT series
≦20% 0402≧2.2µF
≦15% --- ---
#1 Excluding
X5R/0201/105(6.3V);225(10V),
X6S/0201/104(10V)
≧
0.47µF);0603≧10µF;
≦15%
6.3V
≦10%
(1.0±0.2Vrms,1KHz±10%)
4V
Y5V:
*Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set
for 24±2 hrs at room temp.
Rated vol. D.F. ≦ Exception of D.F.≦
≦7%
0603≧0.1µF; 0805≧0.47µF; 1206≧4.7µF; TT series
≧50V
≦5%
≦7%
≦12.5% 1210≧6.8µF
35V
---
---
0402≧0.047µF;0603≧0.1µF; 0805≧0.33µF;
1206≧1µF; 1210≧4.7µF
0402≧0.068µF;0603≧0.47µF; 1206≧4.7µF;
1210≧22µF; TT series
0402≧0.068µF; 0603≧0.68µF
≦7%
25V
≦5%
≦9%
≦9%
16V
(C<1.0µF)
≦7%
≦9%
≦12.5% 0402≧0.22µF
0603≧2.2µF; 0805≧3.3µF;1206≧10µF;
16V
(C≧1.0µF)
≦12.5%
1210≧22µF; 1812≧47µF; TT series
10V
≦12.5% ≦20% 0402≧0.47µF
6.3V
≦20% --- ---
* No evidence of damage or flash over during test.
4. Dielectric
Strength
*To apply voltage:
≦
100V: 250% of rated voltage.
200V ~ 300V: 200% of rated voltage.
400V ~ 450V: 120% of rated voltage.
500V ~ 999V: 150% of rated voltage.
1000V ~ 3000V: 120% of rated voltage.
4000V: 110% of rated voltage.
*Duration: 1 to 5 sec.
*Charge & discharge current less than
50mA.
Page 8 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
No.
Item
Test Condition
Requirements
10GΩ or RxC≧500Ω-F whichever is smaller.
5. Insulation
Resistance
To apply rated voltage for MAX. 120sec.
Class II (X7R, X7E, X5R,X6S,X7S,Y5V:)
Rated voltage
Insulation
Resistance
100V: All X7R
50V:0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0805≥2.2µF;1206≧2.2µF;1210≧10µF
25V:0402≥1µF;0603≥2.2µF;0805≥2.2µF;1206≥10µF;1210≥10µF
16V: 0201≥0.1µF,0402≥0.22µF;0603≥1µF;
0805≥2.2µF;1206≥10µF;1210≥47µF
10GΩ or
RxC≧100 Ω-F
whichever is
smaller.
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series; Size≥1812
Insulation
Resistance
Rated voltage
All X6S items, All X7S items
100V: 1210≥3.3µF
50V: 0402≥0.1µF; 0603≥2.2µF; 0805≥10µF;1206≥10µF
35V: 0603≥1µF;
25V: 0201≥0.1µF; 0402≥2.2µF;0603≥10µF; 0805≥10µF;1206≥22µF
16V: 0603≥10µF; 0402≥1µF; 0201≥0.22µF
10V: 0201>0.1µF; 0402≥1µF; 0603≥10µF; 0805≥47µF; TT21>4.7µF
RxC≧50 Ω-F.
6.3V: 0201≥0.1µF; 0603>4.7µF; 0805≥47µF;1206≥10µF; TT15>1.0µF
4V:0603≥22µF; 0805≥47µF; 1206≥100µF
Rated voltage:
200~630V
To apply rated voltage ≥10GΩ or RxC≥100Ω-F whichever is smaller
(500V max.) for 60 sec.
To apply 500V for 60
sec.
Rated voltage:
>630V
Page 9 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
No.
Item
Test Condition
Requirements
With no electrical load.
6. Temperature
Coefficient
T.C.
NPO
X7R
X7S
X5R
X6S
Y5V
Operating Temp
T.C.
NPO
X7R
Capacitance Change
-55~125°C at 25°C
-55~125°C at 25°C
-55 ~ 125°C at 25°C
-55~ 85°C at 25°C
-55~105°C at 25°C
-25~ 85°C at 20°C
Within ±30ppm/°C
Within ±15%
X7S
X5R
X6S
Y5V
Within ±22%
Within ±15%
Within ±22%
*Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24± 2 hrs
at room temp.
Within +30%/-80%
* Measurement voltage for Class II:
01005
Cap≤0.01µF: 0.5V
Cap>0.01µF: 0.2V
0201
Cap<0.1µF:1V
0.1µF*≤Cap<1µF: 0.2V
Cap≥1µF: 0.1V
*0201X104/16V: 0.5V
0603
0402
Cap<1µF: 1V
Cap≤1µF: 1V
Cap=1µF: 0.5V
1µF<Cap<10µF: 0.2V
Cap≥10µF: 0.1V
0805
Cap<10µF: 1V
Cap=10µF: 0.5V
Cap>10µF: 0.2V
1µF<Cap≤4.7µF: 0.5V
Cap>4.7µF: 0.2V
1206/1210
Cap≤10µF: 1V
10µF<Cap≤100µF: 0.5V
Cap>100µF: 0.2V
* Pressurizing force:
2N (0201) and 5N (≤0603) and 10N (>0603)
* Test time: 10±1 sec.
7. Adhesive Strength
of Termination
* No remarkable damage or removal of the terminations.
* Vibration frequency: 10~55 Hz/min.
* Total amplitude: 1.5mm
* Test time: 6 hrs. (Two hrs each in three mutually
perpendicular directions.)
8. Vibration Resistance
* No remarkable damage.
* Cap change and Q/D.F.: To meet initial spec.
*Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24± 2 hrs
at room temp.
*Cap./DF(Q) Measurement to be made after de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.
9. Solderability
10. Bending Test
* Solder temperature: 235±5°C
* Dipping time: 2±0.5 sec.
* 75% min. coverage of all metalized area.
* The middle part of substrate shall be pressurized by
means of the pressurizing rod at a rate of about 1 mm per
second until the deflection becomes 5 mm and then the
pressure shall be maintained for 5±1 sec.
*Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24± 2 hrs
at room temp.
* No remarkable damage.
* Cap change:
NP0: within ±5% or 0.5pF whichever is larger
X7R, X5R, X6S, X7S: within ±12.5%
Y5V: within ±30%
(This capacitance change means the change of capacitance under
specified flexure of substrate from the capacitance measured before the
test.)
* Measurement to be made after keeping at room temp.
for 24±2 hrs.
* Solder temperature: 260±5°C
* Dipping time: 10±1 sec
11. Resistance to
Soldering Heat
* No remarkable damage.
* Cap change:
* Preheating: 120 to 150°C for 1 minute before imme rse
the capacitor in a eutectic solder.
*Before initial measurement (Class II only): To apply
de-aging at 150°C for 1hr then set for 24±2 hrs at room
temp.
*Cap. / DF(Q) / I.R. Measurement to be made after
de-aging at 150°C for 1hr then set for 24±2 hrs at room
temp.
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R, X6S, X7S: within ±7.5%
Y5V: within ±20%
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
* 25% max. leaching on each edge.
* Conduct the five cycles according to the temperatures
and time.
12. Temperature Cycle
* No remarkable damage.
* Cap change:
Step
Temp. (°C)
Min. operating temp. +0/-3
Room temp.
Time (min.)
30±3
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R, X6S, X7S: within ±7.5%
1
2
3
4
2~3
Y5V: within ±20%
Max. operating temp. +3/-0
Room temp.
30±3
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
2~3
*Before initial measurement (Class II only): To apply
de-aging at 150°C for 1hr then set for 24±2 hrs at room
temp.
* Cap. / DF(Q) / I.R. Measurement to be made after
de-aging at 150°C for 1hr then set for 24±2 hrs at room
temp.
Page 10 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
No.
Item
Test Condition
Requirements
13. Humidity (Damp
Heat) Steady State
*Test temp.: 40±2°C
* No remarkable damage.
* Cap change:
*Humidity: 90~95%RH
*Test time: 500+24/-0hrs.
NP0: within ±5% or 0.5pF whichever is larger
X7R, X5R, X6S, X7S: ≥10V**,within ±12.5%; ≦6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V: 0603≧4.7µF;0402≧1µF;0201≧0.1µF, within ±25%;
*Before initial measurement (Class II
only): To apply de-aging at 150°C for
1hr then set for 24±2 hrs at room temp.
* Cap. / DF(Q) / I.R. Measurement to be
made after de-aging at 150°C for 1hr
then set for 24±2 hrs at room temp.
Y5V: ≥10V, within ±30%; ≦6.3V, within +30/-40%
* Q/D.F. value:
NP0: More than 30pF Q≥350, 10pF≤C≤30pF, Q≥275+2.5C
Less than 10pF Q≥200+10C
X7R, X5R, X6S, X7S:
Rated
D.F.≦ Exception of D.F.≦
vol.
≦6% 1206≧0.47µF
≧100V≦3%
50V ≦3%
≦7.5% 0805>0.1µF, 0603≧0.068µF, 1206>1µF;1210≧2.2µF;TT series
≦20% 0805>0.22µF;1210 3.3µF
≦6% 0201(50V);0603≧0.047µF; 0805≧0.18µF; 1206≧0.47µF
≦10% 0201 0.01uF;1210≧4.7µF
≧
≧
0402≧0.012µF; 0603>0.1µF; 0805≧1µF(0805/X7R>0.47µF);
1206≧2.2µF; 1210≧10µF; TT series
≦20%
35V ≦5% ≦20% 0603≧1µF;0805≥2.2ꢀF;1206
≧2.2µF;1210≧10µF
≦10% 0201≧0.01µF;0805≧1µF; 1210≧10µF
≦14% 0603≧0.33µF
25V ≦5%
16V ≦5%
0201
≧
0.1µF;0402≧0.10µF&(0402/X7R
;0603≧0.47µF;0805≧2.2µF;1206≧4.7µF;1210≧22µF
≦20% 0402 0.47µF
≦10% 0603≧0.15µF;0805≧0.68µF;1206≧2.2µF;1210≧4.7µF
≧0.056µF); TT series
≦15%
≧
0201≧0.01µF(0201/X7R
0603≧0.68µF;0805≧2.2µF;1206≧4.7µF; 1210≧22µF; TT series
0201≧0.012µF; 0402≧0.33µF(0402/X7R≧0.22µF);
0603≧0.33µF;0805≧2.2µF;1206≧2.2µF; 1210≧22µF
≧0.022µF);0402≧0.033µF;
≦15%
≦15%
10V ≦7.5%
≦20% 0201≧0.1µF ;0402≧1µF; TT series; 01R5
0201≧0.1µF;0402≧1µF(0402/X6S 0.47µF);0603≧10µF;
0805≧4.7µF;1206≧47µF;1210≧100µF;TT series
≧
6.3V ≦15% ≦30%
4V
Y5V:
Rated vol. D.F.≦ Exception of D.F.≦
0603≧0.1µF; 0805≧0.47µF;
≦20% ---
---
≦10%
1206≧4.7µF
≧50V
≦7.5%
≦20% 1210≧6.8µF
35V
≦10% ---
≦10%
---
0402≧0.047µF;0603≧0.1µF;
0805≧0.33µF;1206≧1µF; 1210≧4.7µF
0402≧0.068µF;0603≧0.47µF;
1206≧4.7µF; 1210≧22µF
25V
≦7.5%
≦15%
≦12.5%0402≧0.068µF; 0603≧0.68µF
≦20% 0402≧0.22µF
16V
(C<1.0µF)
≦10%
16V
(C≧1.0µF)
10V
6.3V
0603≧2.2µF; 0805≧3.3µF;
≦12.5%≦20%
1206≧10µF;1210≧22µF; 1812≧47µF;
≦20% ≦30% 0402≧0.47µF
≦30% --- ---
*I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
Class II (X7R, X5R, X6S, X7S, Y5V)
Insulation
Resistance
Rated voltage
100V: All X7R;1210≥3.3µF
50V: 0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0603≥1µF;0805≥2.2µF; 1206≧2.2µF;1210≧10µF
1GΩ or
25V:0201≧0.1uF; 0402≥0.22µF; 0603≥2.2µF;0805≥2.2µF;
1206≥10µF;1210≥10µF
RxC≧10 Ω-F
whichever is
smaller.
16V: 0201≧0.1uF;0402≥0.22µF;0603≥1µF;0805≥2.2µF;
1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series ; All X6S/X7S items; Size≥1812
Page 11 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
No
Item
Test Condition
Requirements
*Test temp.:40±2°C
* No remarkable damage.
Cap change:
14 Humidity (Damp
Heat) Load
*Humidity:90~95%RH
*Test time:500+24/-0 hrs.
NP0: ±7.5% or 0.75pF whichever is larger.
X7R, X5R, X6S X7S: ≥10V**,within ±12.5%; ≦6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
,
*To apply voltage:
Rated voltage (MAX. 500V)
**10V: 0603≧4.7µF;0402≧1µF;0201≧0.1µF, within ±25%;
Y5V: ≥10V, within ±30%; ≦6.3V, within +30/-40%
Q/D.F. value:
*Before initial measurement (Class II
only): To apply de-aging at 150°C for
1hr then set for 24±2 hrs at room temp.
* Cap. / DF(Q) / I.R. Measurement to be
made after de-aging at 150°C for 1hr
then set for 24±2 hrs at room temp.
NP0: C≥30pF,Q≥200;C<30pF, Q≥100+10/3C
X7R, X5R, X6S, X7S:
Rated
vol.
D.F.≦ Exception of D.F.≦
≦6% 1206≧0.47µF
≧100V≦3%
50V ≦3%
≦7.5% 0805>0.1µF, 0603≧0.068µF, 1206>1µF;1210≧2.2µF;TT series
≦20% 0805>0.22µF;1210 3.3µF
≦6% 0201(50V);0603≧0.047µF; 0805≧0.18µF; 1206≧0.47µF
≦10% 0201 0.01uF;1210≧4.7µF
≧
≧
0402≧0.012µF; 0603>0.1µF; 0805≧1µF(0805/X7R>0.47µF);
1206≧2.2µF; 1210≧10µF; TT series
≦20%
35V ≦5% ≦20% 0603≧1µF;0805≥2.2ꢀF;1206
≧2.2µF;1210≧10µF
≦10% 0201≧0.01µF;0805≧1µF; 1210≧10µF
≦14% 0603≧0.33µF
25V ≦5%
16V ≦5%
0201
≧
0.1µF;0402≧0.10µF&(0402/X7R
;0603≧0.47µF;0805≧2.2µF;1206≧4.7µF;1210≧22µF
≦20% 0402 0.47µF
≦10% 0603≧0.15µF;0805≧0.68µF;1206≧2.2µF;1210≧4.7µF
≧0.056µF); TT series
≦15%
≧
0201≧0.01µF(0201/X7R
0603≧0.68µF;0805≧2.2µF;1206≧4.7µF; 1210≧22µF; TT series
0201≧0.012µF; 0402≧0.33µF(0402/X7R≧0.22µF);
≧0.022µF);0402≧0.033µF;
≦15%
≦15%
10V ≦7.5%
0603≧0.33µF;0805≧2.2µF;1206≧2.2µF; 1210≧22µF
≦20% 0201≧0.1µF ;0402≧1µF; TT series; 01R5
0201≧0.1µF;0402≧1µF(0402/X6S 0.47µF);0603≧10µF;
0805≧4.7µF;1206≧47µF;1210≧100µF;TT series
≧
6.3V ≦15% ≦30%
4V
Y5V:
Rated vol. D.F.≦ Exception of D.F.≦
≦20% ---
---
≦10% 0603≧0.1µF; 0805≧0.47µF;1206≧4.7µF
≦20% 1210≧6.8µF
≧50V
≦7.5%
≦10% ---
≦10%
35V
---
0402≧0.047µF;0603≧0.1µF;
0805≧0.33µF;1206≧1µF; 1210≧4.7µF
0402≧0.068µF;0603≧0.47µF;
1206≧4.7µF; 1210≧22µF
25V
≦7.5%
≦15%
≦12.5%0402≧0.068µF; 0603≧0.68µF
≦20% 0402≧0.22µF
16V
(C<1.0µF)
≦10%
16V
(C≧1.0µF)
10V
6.3V
0603≧2.2µF; 0805≧3.3µF;
≦12.5%≦20%
1206≧10µF;1210≧22µF; 1812≧47µF;
≦20% ≦30% 0402≧0.47µF
≦30% --- ---
*I.R.: ≥10V, 500MΩ or 25 Ω-F whichever is smaller.
Class II (X7R, X5R, X6S, X7S, Y5V)
Insulation
Resistance
Rated voltage
100V: All X7R;1210≥3.3µF
50V: 0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0603≥1µF;0805≥2.2µF; 1206≧2.2µF;1210≧10µF
500MΩ or
RxC≧5 Ω-F
whichever is
smaller.
25V:0201≧0.1uF; 0402≥0.22µF; 0603≥2.2µF;0805≥2.2µF;
1206≥10µF;1210≥10µF
16V: 0201≧0.1uF;0402≥0.22µF;0603≥1µF;0805≥2.2µF;
1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series ; All X6S/X7S items; Size≥1812
Page 12 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
No
Item
Test Condition
Requirements
15. High Temperature *Test temp.:
* No remarkable damage.
Cap change:
NP0, X7R/X7E/X7S: 125±3°C
Load
X6S: 105±3°C
X5R, Y5V: 85±3°C
*Test time: 1000+24/-0 hrs.
(Endurance)
NP0: ±3.0% or ±0.3pF whichever is larger
X7R, X5R, X6S, X7S: ≥10V**,within ±12.5%; ≦6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V: 0603≧4.7µF;0402≧1µF;0201≧0.1µF, within ±25%;
*To apply voltage:
(1) ≦6.3V or C≧10µF or TT series: 150% of
rated voltage.
Y5V: ≥10V, within ±30%; ≦6.3V, within +30/-40%
Q/D.F. value:
(2) 10V~250V: 200% of rated voltage.
(3) 400V~450V: 120% of rated voltage.
(4) 500V: 150% of rated voltage.
(5) 630V~3000V: 120% of rated voltage.
(6) 4000V: 110% of rated voltage
NP0: More than 30pF, Q≥350
10pF≤C<30pF, Q≥275+2.5C
Less than 10pF, Q≥200+10C
X7R, X5R, X6S, X7S:
Rated
(7) 100% of rated voltage for below range.
D.F.≦ Exception of D.F.≦
vol.
Rated
Capacitance
Size
Dielectric
≦6% 1206≧0.47µF
≧100V≦3% ≦7.5% 0805>0.1µF,0603≧0.068µF,1206>1µF;1210≧2.2µF;TT series
≦
10V
16V
C≧
C >0.1µF
C >1.0µF
0.1µF
0201 X5R/X7R/X6S
X5R
≧
≦20% 0805>0.22µF;1210
≦6% 0201(50V);0603≧0.047µF; 0805≧0.18µF; 1206≧0.47µF
≦10% 0201 0.01uF;1210≧4.7µF
≧3.3µF
≦16V
25V,50V
6.3V,10V
16V,25V
C
≧
1.0µF
≧
0402
X6S
C >1.0µF
50V ≦3%
0402≧0.012µF; 0603>0.1µF; 0805≧1µF(0805/X7R>0.47µF);
1206≧2.2µF; 1210≧10µF; TT series
C
C
≧
1.0µF
≦20%
X7R/X7S/Y5V 6.3V,10V
≧1.0µF
35V ≦5% ≦20% 0603≧1µF;0805≥2.2ꢀF;1206
≧2.2µF;1210≧10µF
4V
6.3V,10V
25V
35V
4V
C
≧
22µF
4.7µF
1.0µF
1.0µF
47µF
22µF
10µF
10µF
22µF
47µF
X5R/X7R/
X6S/X7S
X5R/X6S/X7S
X7R
≦10% 0201≧0.01µF;0805≧1µF; 1210≧10µF
≦14% 0603≧0.33µF
C
C
C
≧
0603
0805
≧
25V ≦5%
16V ≦5%
≧
0201
≧
0.1µF;0402≧0.10µF&(0402/X7R
;0603≧0.47µF;0805≧2.2µF;1206≧4.7µF;1210≧22µF
≦20% 0402 0.47µF
≦10% 0603≧0.15µF;0805≧0.68µF;1206≧2.2µF;1210≧4.7µF
≧0.056µF); TT series
≦15%
C
C
C
C
C
C
≧
X5R/X7R/
X6S/X7S
≧
6.3V
10V,50V
≧
≧
≧
≧
≧
X7R/X6S/X7S
X5R
X5R/X7R/X6S
NP0
X5R/X7R/X6S
X7R
0201≧0.01µF(0201/X7R
0603≧0.68µF;0805≧2.2µF;1206≧4.7µF; 1210≧22µF; TT ser
0201≧0.012µF; 0402≧0.33µF(0402/X7R≧0.22µF);
≧0.022µF);0402≧0.033µF;
16V,25V
≦15%
≦15%
≦6.3V
3000V
16V
1206
1210
10V ≦7.5%
0603≧0.33µF;0805≧2.2µF;1206≧2.2µF; 1210≧22µF
C
≧
1.5pF
≧
≦20% 0201≧0.1µF ;0402≧1µF; TT series; 01R5
C
47µF
100V
C
≧
3.3µF
0201≧0.1µF;0402≧1µF(0402/X6S 0.47µF);0603≧10µF;
0805≧4.7µF;1206≧47µF;1210≧100µF;TT series
≧
6.3V ≦15% ≦30%
TT15
TT18
X5R
Y5V
Y5V
6.3V
6.3V,10V
6.3V
C >1.0µF
2.2µF 4V
C
≧
≦20% ---
---
C
C
C
≧
≧
≧
10µF
10µF
22µF
TT21
TT31
Y5V:
Rated vol. D.F.≦ Exception of D.F.≦
X5R/X7R/X6S
Y5V
≦
10V
6.3V
≦10% 0603≧0.1µF; 0805≧0.47µF;1206≧4.7µF
≦20% 1210≧6.8µF
**1WV items must follow de-rating conditions.
(8) 150% of rated voltage for below range.
≧50V
≦7.5%
≦10% ---
≦10%
35V
---
Rated
Size
Dielectric
Capacitance
C=0.1µF
0402≧0.047µF;0603≧0.1µF;
0805≧0.33µF;1206≧1µF; 1210≧4.7µF
0402≧0.068µF;0603≧0.47µF;
1206≧4.7µF; 1210≧22µF
X5R/X6S
X7R
X7R/X5R/
X6S
16V,25V
0201
25V
≦7.5%
16V
50V
10~25V
16V
50V~100V
50V
C
≧
0.022µF
≦15%
C>0.01µF
0402
0603
C
C
≧
0.22µF
≦12.5%0402≧0.068µF; 0603≧0.68µF
≦20% 0402≧0.22µF
16V
(C<1.0µF)
≦10%
Y5V
X7S
≧0.47µF
C>0.22µF
C>0.1µF
C=1.0µF
C≧1.0µF
16V
(C≧1.0µF)
10V
6.3V
0603≧2.2µF; 0805≧3.3µF;
≦12.5%≦20%
1206≧10µF;1210≧22µF; 1812≧47µF;
≦20% ≦30% 0402≧0.47µF
≦30% --- ---
X7R
25V
50V
X5R
X5R/X7R/
10V,16V,
C≧1.0µF
X6S/X7S
Y5V
16V
100V
50V
35V
10~25V
16V
C≧2.2µF
*I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
C≧0.47µF
C≧1.0µF
C≧2.2µF
C≧4.7µF
C≧4.7µF
C>1.0µF
C=4.7µF
Class II (X7R, X5R, X6S, X7S, Y5V)
X5R/X7R/
X6S/X7S
0805
Insulation
Resistance
Rated voltage
Y5V
X5R/X7R/
X6S/X7S
100V: All X7R;1210≥3.3µF
100V
50V
1206
1210
50V: 0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0603≥1µF;0805≥2.2µF; 1206≧2.2µF;1210≧10µF
X5R/X7R/
X6S/X7S
50V~100V
C≧2.2µF
1GΩ or RxC≧
10 Ω-F
whichever is
smaller.
25V:0201≧0.1uF; 0402≥0.22µF; 0603≥2.2µF;0805≥2.2µF;
1206≥10µF;1210≥10µF
1825
2220
2225
X7R
100V~250V
C≧1.0µF
16V: 0201≧0.1uF;0402≥0.22µF;0603≥1µF;0805≥2.2µF;
1206≥10µF;1210≥47µF
* Before initial measurement (Class II only): To
apply de-aging at 150°C for 1hr then set for 24±2
hrs at room temp.
* Cap. / DF(Q) / I.R. Measurement to be made
after de-aging at 150°C for 1hr then set for 24±2
hrs at room temp.
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series ; All X6S/X7S items; Size≥1812
** De-rating conditions:
Page 13 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
APPENDIXES
◙ Tape & reel dimensions
Fig. 2 The dimension of paper tape
Fig. 3 The dimension of plastic tape
Size
0402 0603
0805
B
1.50
+/-0.20
1206
1210
C,D,G,K
1808
D, G, K
< 3.20
1812
D, G, K
Thickness
E
0.70
+/-0.20 +/-0.30
S, X
1.05
A
1.50
+/-0.20
2.30
+/-0.20
C, D, I
B
1.90
+/-0.50
3.50
+/-0.50
C, J, D G, P
M
M, U
< 1.80
< 2.00
<2.30
< 3.05
< 3.05
< 2.50
< 3.90
A0
B0
T
1.20
1.80
2.30
+/-0.20
< 2.70
< 3.70
< 4.00
< 3.80
< 3.80
<4.00
< 5.30
< 5.30
+/-0.20 +/-0.30
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
0.23
+/-0.1
0.25
+/-0.1
0.25
+/-0.1
≦0.80
≦1.20
≦1.15
≦1.20
≦1.20
-
-
-
-
< 2.50
-
< 2.50
< 2.50
< 1.50
< 2.50
< 3.20
< 2.50
< 2.50
K0
W
8.00
+/-0.30 +/-0.30
8.00
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
8.00
+/-0.30
12.00
+/-0.30
12.00
+/-0.30
4.00
4.00
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
4.00
+/-0.10
P0
+/-0.10 +/-0.10
40.00 40.00
+/-0.10 +/-0.20
2.00 4.00
+/-0.05 +/-0.10
2.00 2.00
+/-0.05 +/-0.05
1.50 1.50
+0.1/-0 +0.1/-0
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
10xP0
P1
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
+/-0.20
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
1.00
+/-0.10
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
1.00
+/-0.10
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
1.00
+/-0.10
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
1.00
+/-0.10
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
1.00
+/-0.10
4.00
+/-0.10
2.00
+/-0.05
1.50
+0.1/-0
1.00
+/-0.10
4.00
+/-0.10
2.00
+/-0.10
1.50
+0.1/-0
1.50
+/-0.10
8.00
+/-0.10
2.00
+/-0.10
1.50
+0.1/-0
1.50
+/-0.10
P2
D0
D1
E
-
-
-
-
-
1.75
1.75
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
1.75
+/-0.10
+/-0.10 +/-0.10
3.50
3.50
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
3.50
+/-0.05
5.50
+/-0.10
5.50
+/-0.10
F
+/-0.05 +/-0.05
Size
0402, 0603, 0805, 1206, 1210
1808, 1812
7”
Reel size
7”
10”
13”
C
W1
A
13.0+0.5/-0.2
8.4+1.5/-0
13.0+0.5/-0.2
8.4+1.5/-0
250.0±1.0
100.0±1.0
13.0+0.5/-0.2
8.4+1.5/-0
330.0±1.0
100±1.0
13.0+0.5/-0.2
12.4+2.0/-0
178.0±1.00
60.0+1.0/-0
178.0±1.0
N
60.0+1.0/-0
Fig. 4 The dimension of reel
Page 14 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
◙ Example of customer label
a. Customer name
b. WTC order series and item number
c. Customer P/O
d. Customer P/N
e. Description of product
f. Quantity
g. Bar code including quantity & WTC P/N or customer
h. WTC P/N
i. Shipping date
j. Order bar code including series and item numbers
k. Serial number of label
*Customized label is available upon request
◙ Constructions
No.
1
2
3
4
5
Name
X7R
Ceramic material
Inner electrode
BaTiO3 based
Ni
Inner layer
Cu + Cu Polymer
Termination
Middle layer
Outer layer
Ni
Sn
Fig. 5 The construction of MLCC
◙ Storage and handling conditions
(1) To store products at 5 to 40°C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life
extension is needed.
Cautions:
a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.
Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide,
chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low
reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by
direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under
direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.
Page 15 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
Multilayer Ceramic Capacitors
Approval Sheet
◙ Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable
against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and
concentration of N2 within oven are recommended.
Fig. 6 Recommended reflow soldering profile for SMT process
with SnAgCu series solder paste.
Fig. 7 Recommended wave soldering profile for SMT process
with SnAgCu series solder.
Page 16 of 16
ASC_Soft termination_(SG)_018A_DS
Feb . 2019
相关型号:
©2020 ICPDF网 联系我们和版权申明