WQAC293AZ0JR10LB [WALSIN]

SMD Air Wound Coil Inductors;


型号：	WQAC293AZ0JR10LB
厂家：	Walsin Technology
描述：	SMD Air Wound Coil Inductors
文件：	总7页 (文件大小：261K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

WQAC293A Series

SMD Air Wound Coil Inductors

AEC-Q200

*Contents in this sheet are subject to change without prior notice.

Page 1 of 7

ASC_WQAC293 Series_V1.0_Auto

Nov. Y2017

Features

Acrylic jacket(WQAC293) provides a flat top for pick and place

Acrylic cap provides a flat top for pick and place mechine for high productive manufacture.

Excellent Q and SRF characteristics for RF application, escipally in subGHz band.

Narrow tolerance available for precise design requirements.

AEC-Q200

Applications

Communication system front-end circuit: GSM/3G/LTE, Wi-Fi, GPS.

Cabel/Terrestrial/BS Tuner, Bluetooth, Wireless Audio, Remote control.

M2M: ZigBee, Proprietary wilreless.

EMI solustion in high frequency circuits.

Automotive

Shape and Dimension

Recommend Patterns

WQAC293A

Unit: mm

Land Pattern

WQAC

Series

3.81(Max)

4.32±0.39

1.53±0.39

293A

4.2 (Max.)

4.83(Max.)

Page 2 of 7

ASC_WQAC293 Series_V1.0_Auto

Nov. Y2017

Ordering Information

293A

22N

Product

Code

Series

Dimensions

Series

Extension

Tolerance

Value

Packing Code

WQ:

Inductor

Air wound

coil

inductor.

293A

Z0:STD

22N=22nH

L=13” Reeled

(Embossed reel)

B:STD

G: ± 2%

J: ± 5%

K: ± 10%

R10=100nH

AEC-Q200

Electrical Characteristics

● WQAC293A series

RDC

Maximum

(mΩ)

Typical Q @

Frequency

(MHz)

SRF

Maximum

(GHz)

Rated Current

Maximum

(A)

Walsin Part Number

L(nH)

Tolerance

Q Min

WQAC293AZ0□22NLB

WQAC293AZ0□27NLB

WQAC293AZ0□33NLB

WQAC293AZ0□39NLB

WQAC293AZ0□47NLB

WQAC293AZ0□56NLB

WQAC293AZ0□68NLB

WQAC293AZ0□82NLB

WQAC293AZ0□R10LB

WQAC293AZ0□R12LB

G、J、K

100

150

3.2

2.7

2.5

2.1

1.5

1.3

1.2

1.1

4.2

4.0

4.8

4.4

5.6

6.2

8.2

9.4

12.3

17.3

3.0

3.5

3.0

2.5

1.7

1.5

100

120

TOLERANCE： G=±2%, J=±5%, K=±10%

※TEST INSTRUMENT: HP4291B、HP8753E、CHROMA16502

NOTE :

1. Inductance & SRF measured on the HP4291B.

2. Operating temp. : -40℃ to +125℃

3. For temperature rise : 15℃

4. SRF measured using the HP8753E

5. MSL：LEVEL 1

Page 3 of 7

ASC_WQAC293 Series_V1.0_Auto

Nov. Y2017

Characteristic Curve

● WQAC293 series

Inductance vs. Frequency

1000.0

120

100

100.0

10.0

100

1000

FREQ(MHz)

Typical Q vs. Frequency

1000.0

120

100

100.0

10.0

100

1000

FREQ(MHz)

Page 4 of 7

ASC_WQAC293 Series_V1.0_Auto

Nov. Y2017

RELIABILITY PERFORMANCE

Test Item

Standard

Source

Test Condition

1000 hrs. at rated operating temperature (e.g. 125°C

part can be stored for 1000 hrs. @ 125°C. Same

applies for 105°C and 85°C. Unpowered.

High Temperature

Exposure (Storage)

MIL-STD-202

Method 108

Measurement at 24±4 hours after test conclusion.

1000 cycles (-40°C to +125°C). Note: If 85°C part o r

105°C part the 1000 cycles will be at that

temperature. Measurement at 24±4 hours after test

conclusion. 30min maximum dwell time at each

temperature extreme. 1 min. maximum transition

time.

JESD22

Method JA-104

Temperature Cycling

1000 hours 85°C/85%RH. Unpowered.

Measurement at 24±4 hours after test conclusion.

MIL-STD-202

Method 103

Biased Humidity

Operational Life

Mechanical Shock

1000 hrs. @ 105°C. If 85°C or 125°C part will be

tested at that temperature.

Measurement at 24±4 hours after test conclusion.

MIL-PRF-27

Method

213.

Condition

Peak Value: 100g’s, Duration: 6ms, Waveform: Half- MIL-STD-202

sine

Method 213

Velocity Change: 12.3ft/sec

5g's for 20 minutes, 12 cycles each of 3 orientations.

Note: Use 8"X5" PCB, .031" thick, 7 secure points on

one long side and 2 secure points at corners of

opposite sides. Parts mounted within 2" from any

secure point. Test from 10-2000 Hz.

MIL-STD-202

Method 204

Vibration

Condition B No pre-heat of samples. Note: Single

Resistance to Soldering Heat Wave Solder - Procedure 2 for SMD and Procedure 1

for Leaded with solder within 1.5mm of device body.

MIL-STD-202

Method 210

Passive Component Human Body Model (HBM)

Electrostatic Discharge (ESD) Test.

Only direct contact discharge, record the voltage

value what the sample can pass.

AEC-Q200-002

ISO/DIS10605

ESD

For both Leaded & SMD. Electrical Test not required.

Magnification 50X. Conditions:

Leaded: Method A @ 235°C, category 3. SMD:

a) Method B, 4 hrs @ 155°C dry heat @ 235°C

Solderability

J-STD-002

b) Method B @ 215°C category 3.

c) Method D category 3 @ 260°C.

Flammability

Board Flex

V-0 or V-1 Acceptable

UL-94

60 sec minimum holding time.

AEC-Q200-005

Terminal Strength (SMD)

Page 5 of 7

Force of 1.8kg for 60 seconds.

AEC-Q200-006

ASC_WQAC293 Series_V1.0_Auto

Nov. Y2017

Typical RoHS Reflow Profile

Page 6 of 7

ASC_WQAC293 Series_V1.0_Auto

Nov. Y2017

Packaging Specification

THE FORCE FOR TEARING OFF COVER TAPE IS 10 TO

130 GRAMS IN THE ARROW DIRECTION.

THICKNESS (t)

0.10 MAX

165 TO 180°

TOP COVER TAPE

EMBOSSED CAVITY

BASE TAPE

EMBOSSED CARRIER

START

END

NO COMPONENTS

160 (mm) MIN

COMPONENTS

NO COMPONENTS

MIN. 390 (mm)

MAX. 560 (mm)

COVER TAPE

USER DIRECTION OF FEED

CARRIER TAPE REELS (mm)

DIMENSIONS OF CARRIER TAPE (mm)

MATERIAL:

PLASTIC

+0.1

-0

φ1.5

UNIT:mm

DIM

340

13.0

16.5

25.5

±0.5

100

16.0

12.0

±0.10

4.0

2.0

0.4

TOL.

MAX

±0.5

REF

±0.30

±0.10

±0.05

Quantity per reel：1K pcs

Page 7 of 7

ASC_WQAC293 Series_V1.0_Auto

Nov. Y2017

相关型号：