SL-SMT3.5/7/90F [WEIDMULLER]
Connectors - reduces costs in the production process; 连接器 - 降低了生产过程中的成本型号: | SL-SMT3.5/7/90F |
厂家: | WEIDMULLER |
描述: | Connectors - reduces costs in the production process |
文件: | 总8页 (文件大小:191K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data sheet
Connectors
T h e In t e r fa c e P a r t n e r
SL-SMT 3.5
… reduces costs in the production process
SL-SMT 3.5 is the high temperature resistant
pin header for the 3.5 mm pitch range specially
developed to be compatible with Reflow
production processes. Existing pcb connector
headers cannot withstand the high
temperatures experienced in Reflow soldering -
up to 260 °C. The SL-SMT has been designed
using LCP (Liquid Crystal Polymer) which is
stable at these high temperatures.
In addition, convential assembly of pcb
modules requires both Wave soldering for
standard THT (Through-Hole-Technology)
components like pcb connector headers;
and then Reflow soldering for the SMT
(Surface-Mount-Technology) components.
With the SL-SMT, which uses THR technology,
the Wave solder operation is not needed.
The shorter THR solder pins offer the flexibility
of SMT components but achieve a mechanical
strength of 10x that of “Gull Wing” SMT
components. This additional strength is of great
importance for pcb connectors where
connection operations put strain onto standard
SMT solder joints.
The SL-SMT is not only suitable for the latest
soldering techniques, it has also been designed
to be compatible with standard automatic
“Pick-and-Place” machines. “Tape-on-Reel”
and “Tray” packaging enable fully automatic
component placement of the 90° (horizontal)
and 180° (vertical) pin headers. These products
are available in the standard open-ended,
closed-ended and flanged versions, and mate
with any of the female socket connectors in
our BL 3.5 range.
USA
Weidmüller Inc.
821 Southlake Boulevard
Richmond, VA. 23236
Advantages:
l
up to 30% reduction in the number of
production steps required
Tel. (804) 794-2877 Fax (804) 794-0252
Great Britain
l
stable at 260 °C - compatible for
Convection and Vapour-phase Reflow
soldering
Weidmüller Ltd.
1 Abbey Wood Road, Kingshill, West Malling
Kent ME 19 4YT
Tel. (17 95) 58 09 99 Fax (17 32) 87 42 96
l
l
compatible for automatic “Pick-and-Place”
Other countries
THR gives 10x greater strength than
“Gull Wing” SMT
Weidmüller Interface GmbH & Co.
Postfach 30 30
D-32720 Detmold
l
placement on both sides of pcb possible
Tel. (0 52 31) 14-0 Fax (05 23 1) 14-20 83
SL-SMT 3.5 pin headers
At the pcb level, the SL-SMT 3.5 pin header ensures a cost saving in the production
process and, for field wiring, offers a free choice of connection technology thanks to an
extensive range in 3.5 mm pitch.
Packaging types of the SL SMT 3.5
The packaging of the SL SMT 3.5 was conceived for the typical component placement
process used for SMT components:
Automatic component placement:
lꢀTape-on-Reel (ToR)
lꢀTray
Manual component placement:
lꢀStandard box (Std)
The high temperature resistant SL SMT 3.5 pin header can also be used in the wave
soldering process, the advantage being that the plastic is resistant to high temperatures.
For this application however, standard pin lengths are needed. These are available on
request.
Technical data
Derating curves
Materials
Insulation material
Colour
LCP, halogen-free
black
335
Fusion temperature
Flammability class.
Basis contact material
°C
UL 94
V0
CuSn
tin-plated
1)
Contact plating
Characteristic system values
Pitch
mm
3.50
Connection method
Processing method
Through-Hole-Reflow
convection and vapour phase soldering
2)
Soldering pin length
mm
ømm
MΩ
mΩ
°C
1.5
PCB hole diameter 3)
1.4+0.1
≥ 106
≤ 4.2
Insulation resistance
Through resistance
BL 3.5/SL-SMT 3.5/90°, 2 and 24 poles
Conductor H05V-K0.5mm2
Operating temperature range with BL 3.5
-20…+100
VDE 0110 4.97 rated data
Rated current 4)
A
13
Overvoltage category/Pollution severity
Rated voltage
III/3
125
2.5
III/2
125
2.5
II/2
250
2.5
V
Impulse voltage
kV
UL rated data
Rated voltage, industrial
Rated current
V~
A
300
10
CSA rated data
Rated voltage, industrial
Rated current
V~
A
300
10
Application notes
BL 3.5/SL-SMT 3.5/90°, 2 and 24 poles
Conductor H07V-K1.5mm2
1) gold-plated contacts available on request
2) additional soldering pin lengths on request
3) pls. see chapter “design recommendation”
4) referred to 20 °C ambient temperature, rated cross-section
and max. poles in connection with BL 3.5
For the mounting of PCBs it should be noted, that the rated
data given in the data sheet relate only to the connection
elements. The necessary creepage and clearance paths must
be observed in connection with the respective applicant in
accordance to VDE 0110. The current-carrying capacity is to be
determined according to DIN IEC 326 part 3.
Weidmüller connectors are tested according to the DIN 0627
standard, and are valid for its field of applications. Provided that
the connectors are used for the intended purpose, all
requirements with respect to the occuring of electrical,
mechanical, thermic and corrosive stress will be satisfied.
BL 3.5/SL-SMT 3.5, 24 poles
(conductor bridges over the reflow soldering point)
Conductor H07V-K1.5mm2
2
Reel dimensions and position of pin headers
Machine oriented packaging
“Tape-on-Reel”
Feed direction
even pole numbers
uneven pole numbers
pin header is reversed
The pin headers for the 90° and 180°
versions of the SL-SMT 3.5 are available
in “Tape-on-Reel” for automatic
component replacement.
Feed direction
The reels are anti-static, have a diameter
of 330 mm, and are designed for all
commercially available feeders.
The tapes used conform to the standard
IEC 60286-3 and are made of anti-static,
black polystyrene. The tape is covered
with a transparent plastic film.
A high temperature resistant pick-and-
place pad is located in the middle of the
pin header for automatic gripping of the
straight pin header SL-SMT 3.5/180°.
This pick-and-place pad is included in the
“Tape-on-Reel” packaging.
even pole numbers
uneven pole numbers
pin header is reversed
The angled SL-SMT 3.5/90° pin header is
positioned so that no pick-and-place pad
is needed for automatic gripping.
Unit packaging “Tape-on-Reel”
Unit packaging “Tape-on-Reel”
Quantity of SL-SMT 3.5 on the reel
open and closed versions
Quantity of SL-SMT 3.5 on the reel
flanged version
Tape width 56 mm
Tape width 56 mm
Reel diameter 330 mm
Reel diameter 330 mm
Poles
2…11
SL-SMT 3.5/90
250 pcs.
SL-SMT 3.5/180
200 pcs.
Poles
2…9
SL-SMT 3.5/90
250 pcs.
SL-SMT 3.5/180
200 pcs.
In tape, the open and closed versions of the SL-SMT 3.5 are
currently only available up to 11 poles. Additional tape widths
on request.
In tape, the flanged version of the SL-SMT 3.5 is currently only
available up to 9 poles. Additional tape widths on request.
3
Tray dimensions and position of SL-SMT 3.5 pin headers
Machine oriented packaging
“Tray”
The optimum positioning points for the vacuum pipette depend on the length of the
connectors (open, closed or flange). In the tray drawing, we have marked these points
with Start X and Step X for the X axis with reference to the example of an
SL-SMT 3.5/24/90 without a flange. The following table indicates the dimensions for the
X and Y axes for the different pole numbers and versions.
To facilitate adjustment on the machine, the label shows the necessary dimension in
short form.
Example of Label
Cat. No.
176179 3001
28.35 / 17.50 / 15.0 -19.25 / 20.0 / 5
Number Step Y
Step Y in mm
Start Y in mm
Number Step X
Step X in mm
Start X in mm
Tray dimensions SL-SMT 3.5/90° and 180°
open and closed versions
Tray dimensions SL-SMT 3.5/90° and 180°
flange versions
The trays are adapted to the SL-SMT 3.5
pin headers and are based on the
standard EN 60286-5. The tray material
consists of black anti-static polystyrene.
For transport, the trays are covered with
a transparent cover.
X-values 90°/180°
X-values 90°/180°
No. Poles Start X (mm)
Step X (mm)
Number Step X
No. Poles Start X (mm)
Step X (mm)
Number Step X
-
-
-
-
-
-
-
-
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
28.35
30.10
31.85
33.60
35.35
37.10
38.85
40.60
42.35
44.10
45.85
47.60
49.35
51.10
52.85
54.60
56.35
58.10
59.85
61.60
63.35
65.10
66.85
17.50
21.00
24.50
28.00
31.50
35.00
38.50
42.00
45.50
49.00
52.50
56.00
59.50
63.00
66.50
70.00
73.50
77.00
80.50
84.00
87.50
91.00
94.50
15
13
11
9
8
7
6
6
5
5
4
4
3
3
3
3
3
2
4
5
6
7
8
9
28.35
30.10
31.85
33.60
35.35
37.10
38.85
40.60
42,35
44.10
45.85
47.60
49.35
51.10
52.85
54.60
56.35
58.10
59.85
61.60
63.35
17.50
21.00
24.50
28.00
31.50
35.00
38.50
42.00
45.50
49.00
52.50
56.00
59.50
63.00
66.50
70.00
73.50
77.00
80.50
84.00
87.50
15
13
11
9
8
7
6
6
5
5
4
4
3
3
3
3
3
2
A high temperature resistant pick-and-
place pad is placed in the middle of the pin
header for automatic gripping of the
straight pin header SL-SMT 3.5/180° using
a vacuum pipette.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
This pad in included in the tray packaging.
The angled pin header SL-SMT 3.5/90°
was conceived to ensure that no pick-
and-place pad is needed for automatic
gripping.
2
2
2
2
2
2
2
2
Y-values 90°
Y-values 180°
Start Y (mm)
19.25
Step Y (mm)
20.00
Number Step Y
5
Start Y (mm)
17.95
Step Y(mm)
20.00
Number Step Y
5
Unit packaging “Tray”
Unit packaging “Tray”
SL-SMT 3.5/90° and 180°
open and closed versions
SL-SMT 3.5/90° and 180°
flange version
No. Poles
Tray content
No. Poles
Tray content
2…3
on request
96 pcs.
84 pcs.
72 pcs.
60 pcs.
54 pcs.
48 pcs.
42 pcs.
36 pcs.
30 pcs.
24 pcs.
18 pcs.
2
96 pcs.
84 pcs.
72 pcs.
60 pcs.
54 pcs.
48 pcs.
42 pcs.
36 pcs.
30 pcs.
24 pcs.
18 pcs.
4
3
4
5
6
5
7
6
8
7
9
8…9
10…11
12…13
14…18
19…24
10…11
12…13
14…15
16…20
21…24
4
Machine oriented packaging
“Tray”
Tray dimensions and position of pin headers SL-SMT 3.5/90°
even pole numbers
uneven pole numbers
even pole numbers
uneven pole numbers
User preparation of the SL-SMT 3.5 in the “Tray”
For user preparation of the SL-SMT 3.5 in the “Tray”, we also offer all components separately.
Tray empty
Type
Description
Cat. No.
Qty.
Tray SL-SMT 3.5/90
Tray SL-SMT 3.5/180
Tray-Deckel SL-SMT 3.5
PPP-SL-SMT 3.5/180
for SL-SMT 3.5/4…24/90, SL-SMT 3.5/4…24/90G and SL-SMT 3.5/2…24/90F
for SL-SMT 3.5/4…24/180 , SL-SMT 3.5/4…24/180G and SL-SMT 3.5/2…24/180F
for Trays SL-SMT 3.5/…/90 and SL-SMT 3.5/…/180 (open, closed, flange) - for covering and stacking the trays
pick-and-place-pad for SL-SMT 3.5/2…24/180 (open, closed, flange)
177210 0000
177215 0000
177216 0000
176224 0000
1
1
1
500
SL-SMT 3.5 pin headers
Poles
Type
Order-No.
Qty.
2…4
5…16
SL-SMT 3.5/90 (open, closed, flange) and SL-SMT 3.5/180 (open, closed, flange)
SL-SMT 3.5/90 (open, closed, flange) and SL-SMT 3.5/180 (open, closed, flange)
SL-SMT 3.5/90 (open, closed, flange) and SL-SMT 3.5/180 (open, closed, flange)
see page 6+7
see page 6+7
see page 6+7
100
50
17…24
20
5
SL-SMT 3.5/90 pin headers
SL-SMT 3.5/90G pin headers
SL-SMT 3.5/90F pin headers
open ends
closed ends
flange version
attachable without loss of poles
PCB fixing screw
Cat. No. 161074 0000
Pin length
Colour
1.5 mm
Pin length
Colour
1.5 mm
Pin length
Colour
1.5 mm
Poles
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Type
Cat. No. ToR Tray Std
176177 4001 o. r.1 2001
176178 4001 o. r.1 2001
176179 4001 3001 2001
176180 4001 3001 2001
176181 4001 3001 2001
176182 4001 3001 2001
176183 4001 3001 2001
176184 4001 3001 2001
176185 4001 3001 2001
176186 4001 3001 2001
176187 o. r.1) 3001 2001
176188 o. r.1) 3001 2001
176189 o. r.1) 3001 2001
176190 o. r.1) 3001 2001
176191 o. r.1) 3001 2001
176192 o. r.1) 3001 2001
176193 o. r.1) 3001 2001
176194 o. r.1) 3001 2001
176195 o. r.1) 3001 2001
176196 o. r.1) 3001 2001
176197 o. r.1) 3001 2001
176198 o. r.1) 3001 2001
176199 o. r.1) 3001 2001
Poles
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Type
Cat. No. ToR Tray Std
176154 4001 o. r.1 2001
176155 4001 o. r.1 2001
176156 4001 3001 2001
176157 4001 3001 2001
176158 4001 3001 2001
176158 4001 3001 2001
176160 4001 3001 2001
176161 4001 3001 2001
Poles
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Type
Cat. No. ToR Tray Std
176200 4001 3001 2001
176201 4001 3001 2001
176202 4001 3001 2001
176203 4001 3001 2001
176204 4001 3001 2001
176205 4001 3001 2001
176206 4001 3001 2001
176207 4001 3001 2001
SL-SMT 3.5/2/90
SL-SMT 3.5/3/90
SL-SMT 3.5/4/90
SL-SMT 3.5/5/90
SL-SMT 3.5/6/90
SL-SMT 3.5/7/90
SL-SMT 3.5/8/90
SL-SMT 3.5/9/90
SL-SMT 3.5/10/90
SL-SMT 3.5/11/90
SL-SMT 3.5/12/90
SL-SMT 3.5/13/90
SL-SMT 3.5/14/90
SL-SMT 3.5/15/90
SL-SMT 3.5/16/90
SL-SMT 3.5/17/90
SL-SMT 3.5/18/90
SL-SMT 3.5/19/90
SL-SMT 3.5/20/90
SL-SMT 3.5/21/90
SL-SMT 3.5/22/90
SL-SMT 3.5/23/90
SL-SMT 3.5/24/90
SL-SMT 3.5/2/90G
SL-SMT 3.5/3/90G
SL-SMT 3.5/4/90G
SL-SMT 3.5/5/90G
SL-SMT 3.5/6/90G
SL-SMT 3.5/7/90G
SL-SMT 3.5/8/90G
SL-SMT 3.5/9/90G
SL-SMT 3.5/10/90G 176162 4001 3001 2001
SL-SMT 3.5/11/90G 176163 4001 3001 2001
SL-SMT 3.5/12/90G 176164 o. r.1) 3001 2001
SL-SMT 3.5/13/90G 176165 o. r.1) 3001 2001
SL-SMT 3.5/14/90G 176166 o. r.1) 3001 2001
SL-SMT 3.5/15/90G 176167 o. r.1) 3001 2001
SL-SMT 3.5/16/90G 176168 o. r.1) 3001 2001
SL-SMT 3.5/17/90G 176169 o. r.1) 3001 2001
SL-SMT 3.5/18/90G 176170 o. r.1) 3001 2001
SL-SMT 3.5/19/90G 176171 o. r.1) 3001 2001
SL-SMT 3.5/20/90G 176172 o. r.1) 3001 2001
SL-SMT 3.5/21/90G 176173 o. r.1) 3001 2001
SL-SMT 3.5/22/90G 176174 o. r.1) 3001 2001
SL-SMT 3.5/23/90G 176175 o. r.1) 3001 2001
SL-SMT 3.5/24/90G 176176 o. r.1) 3001 2001
SL-SMT 3.5/2/90F
SL-SMT 3.5/3/90F
SL-SMT 3.5/4/90F
SL-SMT 3.5/5/90F
SL-SMT 3.5/6/90F
SL-SMT 3.5/7/90F
SL-SMT 3.5/8/90F
SL-SMT 3.5/9/90F
SL-SMT 3.5/10/90F 176208 o. r.1) 3001 2001
SL-SMT 3.5/11/90F 176209 o. r.1) 3001 2001
SL-SMT 3.5/12/90F 176210 o. r.1) 3001 2001
SL-SMT 3.5/13/90F 176211 o. r.1) 3001 2001
SL-SMT 3.5/14/90F 176212 o. r.1) 3001 2001
SL-SMT 3.5/15/90F 176213 o. r.1) 3001 2001
SL-SMT 3.5/16/90F 176214 o. r.1) 3001 2001
SL-SMT 3.5/17/90F 176215 o. r.1) 3001 2001
SL-SMT 3.5/18/90F 176216 o. r.1) 3001 2001
SL-SMT 3.5/19/90F 176217 o. r.1) 3001 2001
SL-SMT 3.5/20/90F 176218 o. r.1) 3001 2001
SL-SMT 3.5/21/90F 176219 o. r.1) 3001 2001
SL-SMT 3.5/22/90F 176220 o. r.1) 3001 2001
SL-SMT 3.5/23/90F 176221 o. r.1)) 3001 2001
SL-SMT 3.5/24/90F 176222 o. r.1) 3001 2001
1) on request
1) on request
1) on request
Accessories
Description
Type
Cat. No.
Description
Type
Cat. No.
166931 0000
169343 0000
159751 0000
Description
Type
Cat. No.
166931 0000
169343 0000
159751 0000
161074 0000
Locking latch
Coding element
Light indicator
BL/SL 3.5 VR OR
BL/SL 3.50 KO OR
SL 3.5 FLA 1.5/8
166931 0000
169343 0000
159751 0000
Locking latch
Coding element
Light indicator
BL/SL 3.5 VR OR
BL/SL 3.50 KO OR
SL 3.5 FLA 1.5/8
Locking latch
Coding element
Light indicator
PCB fixing screw
BL/SL 3.5 VR OR
BL/SL 3.50 KO OR
SL 3.5 FLA 1.5/8
PTSC KA 22x4.5
Ordering note
Depending on the packaging requirement, the corresponding
4-digit packaging number is added to the 6-digit Cat. No.
ToR
Tray
Std
= packaging in the “Tape-on-Reel”
= packaging in the “Tray”
= packaging in a “Standard box”
Example for ordering in the “Tape-on-Reel”:
Example for ordering in the “Tray”:
Example for ordering in a “Standard box”:
Poles
2
Type
SL-SMT 3.5/2/90
Cat. No. ToR Tray
176177 4001
Std
…
Poles
2
Type
SL-SMT 3.5/2/90
Cat. No. ToR Tray
176177 3001
Std
…
Poles
2
Type
SL-SMT 3.5/2/90
Cat. No. ToR Tray
176177
Std
2001
…
…
…
…
6
SL-SMT 3.5/180 pin headers
SL-SMT 3.5/9180G pin headers
SL-SMT 3.5/180F pin headers
open ends
closed ends
flange versions
attachable without loss of poles
PCB fixing screw
Cat. No. 161074 0000
Pin length
Colour
1.5 mm
Pin length
Colour
1.5 mm
Pin length
Colour
1.5 mm
Polzahl Typ
Best.-Nr. ToR Tray Std
176073 4001 o. r.1 2001
176074 4001 o. r.1 2001
176075 4001 3001 2001
176076 4001 3001 2001
176077 4001 3001 2001
176078 4001 3001 2001
176079 4001 3001 2001
176080 4001 3001 2001
Polzahl Typ
Best.-Nr. ToR Tray Std
Polzahl Typ
Best.-Nr. ToR Tray Std
2
3
4
5
6
7
8
9
SL-SMT 3.5/2/180
2
3
SL-SMT 3.5/2/180G 175298 4001 o. r.1 2001
SL-SMT 3.5/3/180G 175299 4001 o. r.1 2001
SL-SMT 3.5/4/180G 175300 4001 3001 2001
SL-SMT 3.5/5/180G 175301 4001 3001 2001
SL-SMT 3.5/6/180G 175302 4001 3001 2001
SL-SMT 3.5/7/180G 175303 4001 3001 2001
SL-SMT 3.5/8/180G 175304 4001 3001 2001
SL-SMT 3.5/9/180G 175305 4001 3001 2001
SL-SMT 3.5/10/180G 175306 4001 3001 2001
SL-SMT 3.5/11/180G 175307 4001 3001 2001
SL-SMT 3.5/12/180G 175308 o. r.1) 3001 2001
SL-SMT 3.5/13/180G 175309 o. r.1) 3001 2001
SL-SMT 3.5/14/180G 175310 o. r.1) 3001 2001
SL-SMT 3.5/15/180G 175311 o. r.1) 3001 2001
SL-SMT 3.5/16/180G 175312 o. r.1) 3001 2001
SL-SMT 3.5/17/180G 175313 o. r.1) 3001 2001
SL-SMT 3.5/18/180G 175314 o. r.1) 3001 2001
SL-SMT 3.5/19/180G 175315 o. r.1) 3001 2001
SL-SMT 3.5/20/180G 175316 o. r.1) 3001 2001
SL-SMT 3.5/21/180G 175317 o. r.1) 3001 2001
SL-SMT 3.5/22/180G 175318 o. r.1) 3001 2001
SL-SMT 3.5/23/180G 175319 o. r.1) 3001 2001
SL-SMT 3.5/24/180G 175320 o. r.1) 3001 2001
2
3
SL-SMT 3.5/2/180F 176096 4001 3001 2001
SL-SMT 3.5/3/180F 176097 4001 3001 2001
SL-SMT 3.5/4/180F 176098 4001 3001 2001
SL-SMT 3.5/5/180F 176099 4001 3001 2001
SL-SMT 3.5/6/180F 176100 4001 3001 2001
SL-SMT 3.5/7/180F 176101 4001 3001 2001
SL-SMT 3.5/8/180F 176102 4001 3001 2001
SL-SMT 3.5/9/180F 176103 4001 3001 2001
SL-SMT 3.5/10/180F 176104 o. r.1) 3001 2001
SL-SMT 3.5/11/180F 176105 o. r.1) 3001 2001
SL-SMT 3.5/12/180F 176106 o. r.1) 3001 2001
SL-SMT 3.5/13/180F 176107 o. r.1) 3001 2001
SL-SMT 3.5/14/180F 176108 o. r.1) 3001 2001
SL-SMT 3.5/15/180F 176109 o. r.1) 3001 2001
SL-SMT 3.5/16/180F 176110 o. r.1) 3001 2001
SL-SMT 3.5/17/180F 176111 o. r.1) 3001 2001
SL-SMT 3.5/18/180F 176112 o. r.1) 3001 2001
SL-SMT 3.5/19/180F 176113 o. r.1) 3001 2001
SL-SMT 3.5/20/180F 176114 o. r.1) 3001 2001
SL-SMT 3.5/21/180F 176115 o. r.1) 3001 2001
SL-SMT 3.5/22/180F 176116 o. r.1) 3001 2001
SL-SMT 3.5/23/180F 176117 o. r.1) 3001 2001
SL-SMT 3.5/24/180F 176118 o. r.1) 3001 2001
SL-SMT 3.5/3/180
SL-SMT 3.5/4/180
SL-SMT 3.5/5/180
SL-SMT 3.5/6/180
SL-SMT 3.5/7/180
SL-SMT 3.5/8/180
SL-SMT 3.5/9/180
4
5
6
7
8
9
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
SL-SMT 3.5/10/180 176081 4001 3001 2001
SL-SMT 3.5/11/180 176082 4001 3001 2001
SL-SMT 3.5/12/180 176083 o. r.1) 3001 2001
SL-SMT 3.5/13/180 176084 o. r.1) 3001 2001
SL-SMT 3.5/14/180 176085 o. r.1) 3001 2001
SL-SMT 3.5/15/180 176086 o. r.1) 3001 2001
SL-SMT 3.5/16/180 176087 o. r.1) 3001 2001
SL-SMT 3.5/17/180 176088 o. r.1) 3001 2001
SL-SMT 3.5/18/180 176089 o. r.1) 3001 2001
SL-SMT 3.5/19/180 176090 o. r.1) 3001 2001
SL-SMT 3.5/20/180 176091 o. r.1) 3001 2001
SL-SMT 3.5/21/180 176092 o. r.1) 3001 2001
SL-SMT 3.5/22/180 176093 o. r.1) 3001 2001
SL-SMT 3.5/23/180 176094 o. r.1) 3001 2001
SL-SMT 3.5/24/180 176095 o. r.1) 3001 2001
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1) on request
1) on request
1) on request
Accessories
Description
Type
Cat. No.
166931 0000
169343 0000
159751 0000
Description
Type
Cat. No.
166931 0000
169343 0000
159751 0000
Description
Type
Cat. No.
166931 0000
169343 0000
159751 0000
161074 0000
Locking latch
Coding element
Light indicator
BL/SL 3.5 VR OR
BL/SL 3.50 KO OR
SL 3.5 FLA 1.5/8
Locking latch
Coding element
Light indicator
BL/SL 3.5 VR OR
BL/SL 3.50 KO OR
SL 3.5 FLA 1.5/8
Locking latch
Coding element
Light indicator
PCB fixing screw
BL/SL 3.5 VR OR
BL/SL 3.50 KO OR
SL 3.5 FLA 1.5/8
PTSC KA 22x4.5
Ordering note
Depending on the packaging requirement, the corresponding
4-digit packaging number is added to the 6-digit Cat. No.
ToR
Tray
Std
= packaging in the “Tape-on-Reel”
= packaging in the “Tray”
= packaging in a “Standard box”
Example for ordering in the “Tape-on-Reel”:
Example for ordering in the “Tray”:
Example for ordering in a “Standard box”:
Poles
2
Type
SL-SMT 3.5/2/180
Cat. No. ToR Tray
176177 4001
Std
…
Poles
2
Type
SL-SMT 3.5/2/90
Cat. No. ToR Tray
176177 3001
Std
…
Poles
2
Type
SL-SMT 3.5/2/90
Cat. No. ToR Tray
176177
Std
2001
…
…
…
…
7
Design recommendation
We recommend design and calculation of the holes and soldering pastes as follows to ensure an optimum soldering result in the
component placement and reflow processes:
•
•
Large fitting hole of the printed circuit board (final diameter) for automatic placement:
ø 1.4+0.1 mm
This fitting hole is recommended to be able to compensate for printed circuit board, component and machine tolerances.
Small soldering eyelets:
ø 2.3 mm
Small soldering eyelets to ensure that as much soldering paste as possible flows into the through-plating (fitting) hole.
Soldering paste calculation
The quantity of soldering paste depends on:
•
•
•
•
•
pcb thickness
diameter (ø) of the pcb’s fitting hole
soldering pin volume in the pcb
soldering paste evaporation
desired soldered joint shape
form factor F 0.6-0.7
form factor F 0.7-0.8
Calculation example:
V
=
1.34 mm3
soldering pin
V
= ((ø fitting hole)2 * π * pcb thickness) / 4
=
=
((1.4 mm)2 * π * 1.6 mm) / 4
2.46 mm3
fitting hole
V
=
=
V
V
V
=
=
2.46 mm3 – 1.34 mm3
1.12 mm3
1.12 mm3 * 2
2.24 mm3
soldered joint volume
fitting hole -
soldering pin
1)
V
=
=
soldering paste volume
soldering paste volume * 2
1)
Factor 2 applies only to soldering pastes with a 50% evaporation volume. Adapt this value to other soldering pastes.
Stencil calculation
The stencil surface calculation depends on:
•
•
•
stencil thickness
soldering paste volume
soldered joint shape
Calculation example:
A
=
=
V
soldering paste volume / stencil thickness
stencil hole surface
=
2.24 mm3 / 0.18 mm = 12.44 mm2
0.5
2)
D
A
=
=
(12.44 mm * 4 / π)0.5 * 0.7
2.79 mm
stencil hole-ø
stencil hole surface * 4/π
* 0.7
(
)
2)
The soldered joint form factor for the soldered joint shape recommended by us is 0.7
Important: the maximum diameter of the stencil hole should not exceed 2.8 mm (risk for solder beads forming).
For the soldered joint shape and diameter that we recommend, with a stencil thickness of 0.18 mm and a printed circuit board
thickness of 1.6 mm, this results in a stencil hole of 2.8 mm (see calculation example).
Printed in Germany. Printed on chlorine-free paper. Subject to technical changes. 512755/11/99/CMIP-höm/D.F.
8
相关型号:
©2020 ICPDF网 联系我们和版权申明