MRA50PJTDHV [WINCHESTER]

Rack and Panel Connector, 50 Contact(s), Male, Solder Terminal, Plug;


型号：	MRA50PJTDHV
厂家：	Winchester Electronics Corporation
描述：	Rack and Panel Connector, 50 Contact(s), Male, Solder Terminal, Plug 连接器
文件：	总9页 (文件大小：292K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Rack & Panel

MRA Series

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

Receptacle MRA 34S-G

Plug MRA 34P-G

Hood

contact size, the MRA and MRE Series share

the same hoods, hardware and accessories.

The MRA Series offers compact, lightweight

and self-aligning plugs and receptacles with

unusually high current and voltage ratings for

their size. Performance tests show them to

well exceed military standards. Except for

Right angle, dip solder, pin or socket contacts

are available. Consult factory.

Dimensions are for reference only and are

subject to change. Outline drawings on request.

SPECIFICATIONS

Current Rating:13 amps

Dielectric:

Gray glass filled diallyl

phthalate, per MIL-M-14,

SDG-F.

Number of

contacts:

9, 14, 20, 34, 41, 42, 50, 50-

8, 66, 75, 104

Polarization: Gold plated guides provide

polarization. Polarized nickel-

plated brass and/or passivated

stainless steel jackscrews with

anodized aluminum knobs

Pin Contacts: .062 diameter, gold plated

brass

Socket

Contacts:

Phosphor bronze, gold plated

are available.

Terminations: .070 dia. solder cup is

standard. Will accommodate

up to #16 AWG stranded

wire. Pin and Socket

Hoods:

Anodized aluminum. May be

applied to either plug or

receptacle. Both top and side

opening hoods available.

contacts available with .030

diameter dip solder termina-

tions. Consult Sales Dept.

for lengths available.

Electrical Data:Meets high potential

performance of MIL-C-28748.

Military versions are QPL’d to

M28748/1 and M28748/2.

The minimum dielectric

withstanding voltage is one

minute electrification 1000

VAC, sea level.

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 25

Rack & Panel

MRA Series

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

TERMINATION TYPES

Solder Cup

Dip Solder

For pin and socket contacts, .070 diameter

solder cup is the standard termination for

cable and panel mount applications. Wire

accommodation: up to #16 AWG stranded.

For pin and socket contacts, .030 diameter

dip solder terminations, straight or right angle

for mounting to printed circuit board or for use

with flexible cable.

GUIDE SOCKETS

3 Types of Guide Sockets are Available

Guide

Socket

Code Letter

Application

Actual

Size Photo

The “G” type socket is the standard guide supplied. It

has good physical strength and may be used electrically

in a low current circuit or as a contact for ground leads.

G Type

For General Use

Phosphor

The “K” guide socket is an excellent electrical conductor.

Its extra spring-tension provides a high normal force

uniformily distributed along the surface of the engaged

pilot guide, thus minimizing electrical resistance.

The multivolt drop across extreme ends of the engaged

pilot and socket guide is 10 mv. at 20 amps.

K Type For High

Electrical Conductivity

Beryllium Copper

Standard Guide

Pin mates with all types

Brass

The high physical strength of the “N” guide socket allows

a greater degree of forcible tightening against a mounting

surface than is permitted by the other guide sockets.

This feature is particularly desirable for mounting

connectors which will be subject to severe vibration in

service. “N” guides are not to be used electrically.

N Type For extra

Mechanical Strength

Brass

* For passivated stainless steel add SS suffix

PHYSICAL DATA

NUMBER OF CONTACTS

WEIGHT

IN OZ.

14 20 34 41 42 50 50-8 66 75 104

.5 .5 .5 1.1 1.2 1.2 1.5 1.5 2.0 2.3 3.1

.4 .4 .4 .8 .9 .9 1.1 1.1 1.5 1.7 2.2

PLUG

RECEPTACLE

SPECIAL

MRA-50-8 with 8, 20 amp solder cup

contacts and 50, 13 amp solder cup

contacts

CONTACTS CURRENT

RATING

MAX. WIRE

SIZE

SOLDER

CUP DIA

DIAMETER

20 amps

.093

.062

#12 AWG

.106 D

.50

13 amps

#16 AWG

.070 D

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 26

Rack & Panel

MRA Series

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

OUTLINE

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

Drawings and corresponding part

numbers show G type guide sockets.

.86

.37

.78

.37

.27

.070 Dia.

Solder

Cup

1.313 1.000

.150 Typ.

.172 Typ.

4-40 UNC-2A THD.

Slot .038 Wide

Receptacle

MRA 9S-G

Plug

MRA 9P-G

.86

.37

.78

.37

.44

.27

.78

.37

.27

.86

.37

.44

.27

.062 Dia.

.070 Dia.

Solder

Cup

.070 Dia.

Solder

Cup

1.250

1.563

Slot

.038 Wide

.937

1.250

.150 Typ.

.075 Typ.

Slot

.038 Wide

.150 Typ.

.075 Typ.

.168 Typ.

4-40 UNC-2

THD. Type

.130 Typ.

.175 Typ.

4-40 UNC-2 THD. Type

.130 Typ.

Receptacle

MRA 14S-G

Plug

MRA 14P-G

Receptacle

MRA 20S-G

Plug

MRA 20P-G

.86

.37

.78

.75

.47

.23

.44

.27

.37

.27

.075

Typ.

.86

.78

.070 Dia.

Solder

Cup

.37

.27

.37

.27

.075

Typ.

2.312

2.000

2.625

1.688

Slot

.038 Wide

.070 Dia.

Solder

Cup

Mounting Holes For No. 4

Machine Screws

Slot .038 Wide

4-40 UNC-2

THD. Type

.180 Typ.

.130 Typ.

4-40 UNC-2 THD. Type

Receptacle

MRA 34S-G

Receptacle

MRA 41S-G

Plug

MRA 41P-G

Plug

MRA 34P-G

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 27

Rack & Panel

MRA Series

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

OUTLINE

Dimensions are for reference only and are subject

to change. Outline drawings on request.

Drawings and corresponding part numbers show

G type guide sockets.

.86

.37

.88

.75

.47

.23

.27

.78

.75

.47

.23

.86

.78

.09

.09R

.14

.37 .27

.27 .37

.075

Typ.

.075

Typ.

.062 Dia.

2.282

.070 Dia.

Solder

Cup

2.313

2.594

2.000

.070 Dia.

Solder

Cup

2.719

Mounting

Holes For

No. 4

Machine

Screws

Slot .038 Wide

.180 Typ.

4-40 UNC-2 THD.

Mounting Holes For

No. 4 Machine Screws

.180 Typ.

4-40 UNC-2 THD. Slot .038 Wide

Receptacle

MRA 42S-G

Receptacle

MRA 50S-G

Plug

MRA 42P-G

Plug

MRA 50P-G

.86

1.234

.78

.27

.09

.37

1.109

.77

.23

1.125

.50

.86

.78

.27

.37

.14

.27 .37

.27

.37

.075

Typ.

.150

Typ.

.25

.106 Dia.

Solder

Cup

1.969

2.281

2.282

2.594

2.719

.070 Dia.

Solder

Cup

.16

Mounting

Holes For

No. 4 Machine

Screws

4-40 UNC-2A THD.

Slot .038 Wide

Mounting Holes

For No. 4 Machine

Screws

.180 Typ.

Slot .038 Wide

4-40 UNC-2 THD.

.180 Typ.

Receptacle

MRA 75S-G

Plug

MRA 75P-G

Receptacle

MRA 50-8S-G

Plug

MRA 50-8P-G

.070 Dia.

Solder Cup

1.531

.88

.78

8-32 UNC-2A Thd.

.560

1.125

.50

.560

.86

.27 .37

.78

.44

.37

.31R

.13

.37

.075

Typ.

.25

.27

.37

.150

Typ.

2.750

2.375

.038 Dia.

hole

for safety

wire

2.281

1.969

.16

Mounting Holes For

No. 4 Machine

Screws

4-40

UNC-2 THD.

Slot .038 Wide

.180 Typ.

.16

.98

.180 Typ.

4-40

UNC-2 THD.

.27

Receptacle

MRA 66S-G

Plug

MRA 66P-G

Receptacle

MRA 104S-J

Plug

MRA 104P-JT

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 28

Rack & Panel

MRA Series

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

Polarized jackscrews give the ease and assur-

The drawings show the extension of the jack-

ance of threaded positive coupling. The actuating screw knobs beyond a typical MRA connector

side consists of two turnable screws, one male

and one female, each with knurled and slotted

knobs. On the mating half are the two fixed

screws required to complete the locking action.

and beyond the connector-and-hood assembly

(center drawings). Dimensions given are

constant for all connectors except as noted.

Other dimensions applicable to various hood

When mated, the jackscrews may be locked with styles are detailed in the chart.

a safety wire through the hole in the self-locking

pin (in the jackscrew shaft).

JACKSCREWS & JACKSOCKETS

.98 for

size 104

.78

4-40 UNC 2 Thread

except size 104 which is

6-32 UNC 2

.16

Mono-

Jackscrew

Jacksocket

Jackscrew

6-32 UNC 2 Thread

except size 104 which is

8-32 UNC2

Mono-

Jacksocket

.16

Self Locking

.052 Dia. Safety Wire Hole

Hood

Mating connector half with turnable Mating connector half with Hood and

Mating connector half with Hood

and turnable Monojacks.

Code designation: JTDH, JTDH1

Connector with fixed Jackscrews.

Code designation: J

Jackscrews-with-Knobs.

Code designation: JT

turnable Long Jackscrews-with

Knobs. Code designation: JTCH,

JTCH1

DIMENSIONS

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

Connec-

tor Size

Dimension E

Dimension F

H H1 H8 H9

Dimension A

Dimension B

H H1 H8 H9

Dimen

.80

Dimen

1.31

–

H1 H8 H9

2.41 2.09 2.41

2.41 1.84 2.41

–

H1 H8 H9

.59 .58 .59

MRA 9

MRA 14

MRA 20

–

MRA 34 .63 .63 .63 .63 .63 .63 .63 .63 .80

MRA 41 .63 .63 .80

1.31 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41

1.31 2.41 2.41

–

MRA 42 .58 .58 .58 .58 .58 .58 .58 .58 .80

MRA 50 .58 .58 .58 .58 .58 .58 .58 .58 .80

1.31 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41

MRA 50-8 .77

MRA 66 .77

–

.70 .50

–

.50 .80

1.31 2.47

–

2.41 2.19

–

2.19

MRA 75 .56 .56 .56 .56 .56 .56 .56 .56 .80

MRA 104 .67 .67 .50 .50 .80

1.31 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41

1.52 3.42 3.42 3.25 3.25

–

New Monojacks Assemble and Disassemble With Remarkable Ease and Speed

34 to 104 contacts, molds have 2 center thru

holes and 4 mounting holes.

To free the connector from the hood, simply

remove four screws. Monojacks may be used

on miniature rectangular connectors with from

MONOJACKS ARE CAPTIVATED IN KEYHOLE

SLOT OF HOOD AS SHOWN ABOVE.

WHEN USING SHELLS, MONOJACKS ARE

CAPTIVATED IN KEYHOLE OF SHELL AND

CLEARANCE HOLES ARE PLACED IN HOODS.

MOLDINGS HAVE STRAIGHT THRU HOLES

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 29

Rack & Panel

MRA Series

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

OUTLINE

JACKSCREWS & JACKSOCKETS

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

.22 Dia.

.50

.19 Dia.

.22 Dia.

.078 Int.

Hex.

.25 Hex

Typ.

JTCW

JTCU

.19 Dia.

.078 Int. Hex

JTCX

JTCZ

.22 Dia.

.36

JTW

JTU

.25 Hex

6-32 UNC 2 THD.

(Typ)

.78

.80 Typ.

6-32 UNC 2 THD. (Typ)

.16 Typ.

JTX

DIMENSIONS

All jackscrews and sockets are stainless steel, passivated,

except J & JTD which are nickel-plated brass. All knobs

are aluminum, anodized except JTW and JTCW which are

stainless steel, passivated.

Hood Type

Type JTCW

H1 H8

Dimension A

2.22 1.91 2.22

2.22 1.66 2.22 14

2.22 1.66 2.22 20

Type JTCU

H1 H8

Dimension A

2.47 2.16 2.47

2.47 1.91 2.47 14

2.47 1.91 2.47 20

Type JTCX

H1 H8

Dimension A

2.34 2.03 2.34

2.34 1.78 2.34 14

2.34 1.78 2.34 20

Type JTCZ

H1 H8

Dimension A

2.47 2.16 2.47

2.47 1.91 2.47

Size

–

34 2.22 2.22 2.22 2.22 34 2.47 2.47 2.47 2.47 34 2.34 2.34 2.34 2.34 34 2.47 2.47 2.47 2.47

41 2.22 2.22 41 2.47 2.47 41 2.34 2.34 41 2.47 2.47

–

42 2.22 2.22 2.22 2.22 42 2.47 2.47 2.47 2.47 42 2.34 2.34 2.34 2.34 42 2.47 2.47 2.47 2.47

50 2.22 2.22 2.22 2.22 50 2.47 2.47 2.47 2.47 50 2.34 2.34 2.34 2.34 50 2.47 2.47 2.47 2.47

50-8 2.22

66 2.22

–

2.22 50-8 2.47

2.22 66 2.47

–

2.47 50-8 2.34

2.47 66 2.34

–

2.34 50-8 2.47

2.34 66 2.47

–

2.47

75 2.22 2.22 2.22 2.22 75 2.47 2.47 2.47 2.47 75 2.34 2.34 2.34 2.34 75 2.47 2.47 2.47 2.47

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 30

Rack & Panel

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

MRA Series

OUTLINE

HOODS - DRAWN ALUMINUM

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

.228 Dia. 2 Holes For

104*

.191 Dia. 2 Holes*

“Y”

Style

.08

(cable

opening)

“Z”

Style

.08

Top Cable Opening

Side Cable Opening

DIMENSIONS

DIMENSIONS – TOP OPENING

DIMENSIONS – SIDE OPENING

Wt.

Oz.

Wt.

Oz.

Style

Catalog

No.

Fits

Style

Fits

Connector

MRA 34P

MRA 34S

Catalog

No.

Connector

MRA 34P

MRA 34S

“Z”

“Y”

“Z”

“Y”

MRA 34H-491 2.09 .84 1.17 1.59 .66 x .75

–

1.688 .6

1.969 .8

MRA 34H9-491 2.09 .84 1.17 1.59 .64 x .75 1.06 1.688

MRA 50-8P

MRA 50-8S

MRA 50-8P

MRA 50-8S

MRA 50-8H 2.38 1.22 1.17 1.69

1.03D

–

MRA 50-8H9

2.38 1.22 1.17 2.92

.84D

1.34 1.969

MRA 66P

MRA 66S

MRA 66P

MRA 66S

MRA 66H

2.38 1.22 1.17 1.69

2.84 1.63 2.23 2.75

1.03

–

1.969 .8

2.375 1.0

MRA 66H9

MRA 104P

MRA 104S

MRA 104P

MRA 104S

MRA 104H

1.19D

MRA 104H9

2.84 1.63 2.23 3.39 1.19D 1.63 2.375 1.0

OUTLINE

HOODS - FORMED ALUMINUM

MRE Series hoods for use with

MRA Series connectors

DIMENSIONS

Top Cable Opening

Side Cable Opening

H-1 and H-9 Cable Clamps (Side Opening)

H and H-8 Cable Clamps (Top Opening)

Cable

Code No.

Dimensions

Opening

Code No.

Dimensions

Opening

Wt.

Oz.

Fits

Connector

Wt.

Oz.

Fits

Connector

MRE 9H-1 .28 1.28 1.63 1.31 .44 .31D

–

MRA 9 (P or S)

MRA 14 (P or S)

MRA 20 (P or S)

MRA 34 (P or S)

MRA 41 (P or S)

MRA 42 (P or S)

MRA 50 (P or S)

MRE 9H*

.28

1.31 1.31 .44 .31D

–

MRA 9 (P or S)

MRA 14 (P or S)

MRA 20 (P or S)

MRA 34 (P or S)

MRA 41 (P or S)

MRA 42 (P or S)

MRA 50 (P or S)

MRE 9H-9 .28 1.28 1.61 1.31 .44 .59 .31 .3

MRE 14H-1 .28 1.28 1.69 1.25 .5 .38D .3

MRE 14H-9 .28 1.28 1.55 1.25 .5 .59 .38 .3

MRE 20H-1 .28 1.28 1.56 .5 .38D .3

MRE 20H-9 .28 1.28 1.86 1.56 .5 .66 .38 .3

MRE 9H-8 .28

1.30 1.31 .44 .31 .59 .3

MRE 14H-8 .28 .75 1.05 1.25 .5 .38 .59 .3

MRE 20H* .25 .75 1.19 1.56 .5 .44D .3

MRE 20H-8 .25 .75 1.05 1.56 .5 .38 .66 .3

–

MRE 14H* .28 .75 1.19 1.25 .5 .44D

–

MRE 34H-1 .28 1.25 2.42

MRE 34H-9 .28 1.25

.83 .66D

.83 .81 .56 .6

–

MRE 34H

MRE 34H-8 .28 1.25 1.75

MRE 41H

MRE 42H

MRE 42H-8 .09 1.30 1.80 2.31 .83 1.06 .56 .7

MRE 50H .09 1.30 1.72 2.59 .83 .63D .8

MRE 50H-8 .09 1.30 1.80 2.59 .83 1.06 .56 .8

MRE 75H

MRE 75H-8 .09 1.31 1.86 2.59 1.19

.28 1.25 1.67

.83 .66D

.83 1.06 .56 .6

–

MRE 41H-1 .28 1.25 3.06 2.63 .5 .66 .44 .6

MRE 42H-1 .09 1.30 2.73 2.31 .83 .63 .5 .7

.28 1.25 1.67 2.63 .5 .66 .44 .6

.09 1.30 1.72 2.31 .83 .63D .7

–

MRE 42H-9 .09 1.30

MRE 50H-1 .09 1.30 3.02 2.59 .83 .63 .5 .8

MRE 50H-9 .09 1.30 2.59 .83 1.06 .56 .8

–

2.31 .83 .84 .56 .7

–

MRE 75H-1 .09 1.31 3.02 2.59 1.19 .63 .88 1.0 MRA 75 (P or S)

.09 1.31 1.73 2.59 1.19 .63 .88 1.0 MRA 75 (P or S)

.88D 1.0 MRA 75 (P or S)

MRE 75H-9 .09 1.31 2.59 1.19 .88 1.0 MRA 75 (P or S)

–

* H Hoods for MRA 9, 14, and 20 will not accept JTC

hardware. Use H8 hoods.

Winc he ste r Ele c tro nic s

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 31

Rack & Panel

Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps

MRA Series

Lock Tabs (MRE-V shown)

Lever & Pivot Assemblies (MRE-VL shown)

HOODS - LOCKING

Vibration Locks*

are provided for safety wiring. Vibration

locks are available separately for assembly

on connectors now in service. Each code

number indicates two units: two levers with

two pivots, and two lock tabs.

Vibration locks offer simplicity of design and

positive locking in excess of 50G shock impact

and 10G vibration acceleration. Mating halves

automatically lock when engaged. To unlock,

depress the levers. Drilled holes in the levers

Lever

& Pilot

Assembly

Lock Tabs

(See Note)

Used on

Connectors

MRE-VL

MRE-V

MRA 9, 14, 20,

34, 41, 42, 66

*US Patent Number 2760174

Note:Whenpanelmountingthelock-tabhalfofaMRA34, MRA42orMRA50andMRA66connector, flatwashers

(.033 minimum thickness) should be used on the mounting screws to shim the moulding away from the panel.

MRE-VL2

MRE-V2

MRA 50,75

DIMENSIONS / OUTLINE

MOUNTING BRACKETS

Wt.

Oz.

Code No.

DIMENSIONS

.128 Dia 3 Holes

(No. 4 Mounting

Screw)

MRE 50B 1.06 .688 3.031 3.44 .13 .28 .72

.150 Dia 3 Holes

(No. 6 Mounting

Screw)

2.625

.11R

MRE 75B 1.48 1.047 3.062 3.56 .14 .30 1.14

Panel

Opening

DIMENSIONS / OUTLINE

PRE-SHAPED NYLON

POTTING FORMS

MRA 50 and MRA 75 connectors

use the standard MRE 50 and MRE

75 mounting brackets

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

connector after potting. Because of floating

contacts, connector halves should always

be engaged during the potting operation to

preserve contact alignment.

Each form matches the back opening contour of

its appropriate shell, and stays easily in place

during the potting operation. Of negligible

weight, it need not be removed from the

Dimensions

Potting Form Fig.

Code No.

MRA 9 FM

MRA 14 FM

MRA 20 FM

MRA 26 FM

MRA 34 FM

MRA 41 FM

MRA 42 FM

MRA 50 FM

MRA 75 FM

.77

.93

.43

.49

.61

.80

.49

.80

1.16

1.12

1.18

1.38

2.18

1.69

1.97

1.98

.50

.63

.50

.63

Figure 1

Figure 2

Figure 3

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 32

Rack & Panel

Miniature Rectangular / #16 Contacts / .0262" Dia. / 13 Amps

MRA Series

ORDERING INFORMATION

Omit steps not required

MRA

■ Step 1

■ Step 2

■ Step 3

■ Step 4

■ Step 5

■ Step 6

■ Step 7

■ Step 8

■ Step 9

Insert Series

Code

By adding “ML” 9, 14, 20, 34, P - Pin

Number of

Contacts:

Contact

Designation:

Type of

Contact:

Blank =

Standard

Solder Cup

Straight

Dip Solder

.030" dia.:

D3 = .094"

D4 = .125"

D5 = .156"

For additional

lengths in 1/32"

increments,

contact

Guides and

Jackscrew

Locks:

(See bottom

Chart)

Hoods:

Vibration

Locks:

V - Lock Tab

V2 - Lock Tab

(Size 50

& 75)

VL - Lever &

Pivot Ass’y

VL2 - Lever &

Pivot Ass’y

(Size 50

Accessories: Special

Options:

H - Standard

Top

Opening*

H1 - Standard

Side

Opening

H8 - Large Top

Opening

FM - Potting

Forms.

Consult Sales

Department

to the series

41, 42, 50,

S - Socket

When

ordering

molding less

hardware to

be used with

mono-jacks,

see Note

below.

Cannot be

Used with

Hoods.

code, connector 50-8, 66, 75,

is supplied with 104

diallyl phthalate

type SDG-F

and mil plated

contacts.

Example:

MRAML

Request

availability

informa-

tion.

H9 - Large Side

Opening

See Hood

Section for

Availability

*(Note: H Hoods

for MRA 9, 14

and 20 will not

accept JTC

& 75)

Winchester’s

Sales

Department.

hardware. Use

H8 hoods.)

■ Step 5

Guides

**JZ

Same as J but with 6-32 mtg. thd.

(Std. on 104)

Phosphor Bronze Cylindrical Guides*

Beryllium Copper Cylindrical Guides

Brass Cylindrical Guides*

**JTW Same as JT but with knurled round knob

with internal hex (not avail. 104)

Guides are not recommended for Size 104

“P” indicates two guide pins or two jackscrews

(EX. JTCP)

“S” indicates two guide sockets or two jacksockets.

(Ex. GS)

**JTU Same as JT but with knurled round knob

with screwdriver slot (not avail. 104)

**JTX Same as JT but with hex knob

(not avail. 104)

**JTCW Same as JTC but with knurled round knob

with internal hex (not avail. 104)

Jackscrew Locks

**JTCU Same as JTC but with knurled round knob

with screwdriver slot (not avail. 104)

**JTCX Same as JTC but with hex knob

(not avail. 104)

*** J

Polarized Fixed Jackscrew and Jacksocket

Polarized Short Turning Jackscrew

and Jacksocket

JTC

JTD

Polarized Long Turning Jackscrew

and Jacksocket

Polarized Long Turning Mono-Jackscrew and

Mono-Jacksocket for Sizes 34, 42, 50, 66,

75, and 104 only.

**JTCZ Same as JTC but with prybar knob

(not avail. 104)

***

** Request availablity information.

***Material: Nickel-plated brass - standard.

* For passivated stainless steel add SS suffix. (Example: MRA34SGSS)

Mounting Note: Connectors MRA 9, MRA 14, MRA 20 and MRA41 use guides or fixed jacks for mounting in a

hood or on a panel. Connectors MRA 34, MRA 42, MRA 50, MRA 66, MRA 75 use four #4 machine screws,

and MRA 104 uses four #6 machine screws for mounting in a hood or on a panel. Guides are not recom-

mended for use with MRA 104.

Note: When ordering hoods, hardware and connectors separately for use with JTD Monojacks, connec-

tors must be ordered as follows:

Pin connector = MRA34P8, MRA42P8, etc.

Socket connector = MRA34S8, MRA42S8, etc.

The number “8” indicates special housing for use with the JTD Monojack hardware

(available on sizes 34, 42, 50, 66, 75 and 104).

Winc he ste r/ Re tc o nn

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

RP / 33

MRA50PJTDHV [WINCHESTER]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB