MRAC09PJVL [WINCHESTER]
Rack and Panel Connector, 9 Contact(s), Male, Crimp/Solder Terminal;型号: | MRAC09PJVL |
厂家: | Winchester Electronics Corporation |
描述: | Rack and Panel Connector, 9 Contact(s), Male, Crimp/Solder Terminal 连接器 |
文件: | 总9页 (文件大小:270K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Rack & Panel
MRAC Series
Miniature Rectangular, Removable Contacts
FEATURES
■Closed Entry
Removable Socket
and Pin Contacts.
■Connector Inserts with
9 to 104 Contacts.
■Quick Crimp ... Snap in
Place!
■To remove ... insert
removal tool — “Push
Out” Contact!
Removable contacts offer a substantial savings
of time, labor and a great flexibility in the choice
of circuitry. The contact is easily removed with
the hand tool depicted and then placed by
hand or with a simple insertion tool.
The MRAC Series is an important extension of the MRA line featuring a variety
of crimp and solder removable contact styles. Except for body thickness, they
are similar and interchangeable with the MRA Series.
SPECIFICATIONS
Current Rating: Up to 13 amps
Electrical Data: Meets high potential
performance of MIL-C-28748.
No. of
Contacts:
The dielectric withstanding
voltage is one minute
electrification at 2000 VAC
(sea level).
9, 14, 18, 20, 26, 34, 41, 42,
50, 66, 75, 104
Contacts:
Must be ordered separately.
Select from crimp, solder, dip
solder, shielded or Wire-
Wrap termination contacts.
See 100 Series contact
section.
Dielectric:
MRAC Series: Standard glass
filled diallyl phthalate, per MIL-
M-14, SDG-F, color gray.
Qualification: Military Versions are QPL’d to
Contact
M28748/3 and M28748/4.
Identificaiton: Standard contact identifica-
tion is alphabetical except for
MRAC66 and 75 which have
numerical identification. To
order numerical identification
on MRAC 34, 50 or 104,
Polarization: Gold plated guides provide
positive polarization. Polarized
nickel-plated brass and/or
passivated stainless steel with
anodized aluminum knobs available.
Hoods:
Anodized aluminum. May be
applied to either plug or
specify MNAC**P or S.
receptacle. Both top and side
opening hoods available.
MILITARY CROSS REFERENCE
CATALOG NO.
CATALOG NO.
MRAC 9P
MRAC 9S
MRAC 14P
MRAC 14S
MRAC 20P
MRAC 20S
MRAC 26P
MRAC 26S
MS 14007-1
MS 14006-1
MS 18174-1
MS 18175-1
MS 18176-1
MS 18177-1
MS 14008-1
MS 14005-1
MRAC 42P
MRAC 42S
MRAC 50P
MRAC 50S
MRAC 66P
MRAC 66S
MRAC 75P
MRAC 75S
MRAC 104P
MRAC 104S
MS 18180-1
MS 18181-1
MS 18182-1
MS 18183-1
MS 18184-1
MS 18185-1
MS 18187-1
MS 18188-1
MS 18189-1
MS 18190-1
MRAC MS34P MS 18178-1
MRAC MS34S MS 18179-1
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 2
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
OUTLINE
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
Drawings and corresponding part numbers
show G type guide sockets. It is recom-
mended that guides be used wherever
possible for positive polarization and for
protection of contacts except for the MRAC
104 where the jackscrew locking device is
recommended.
.78
.86
.86
.78
Slot
.27
.27
Slot
.038
Wide
.038
.38
.27
.27
4-40
.44
.37
.37
Wide
4-40
UNC 2A
THD.
UNC 2A
THD.
.075
Typ.
.075
Typ.
1.250
1.313
.81
.937
.78
1.000
.09R
.09R
.172
Typ.
.37
.13R
.130 Typ.
.86
.52
.52
.86
MRAC 9S-G
MRAC 9P-G
MRAC 14S-G
MRAC 14P-G
.86
.37
.78
.78
.44
.22
.86
.37
.27
.27
Slot
.038
Wide
Slot
.038
Wide
.27
.27
.37
.56
4-40
UNC 2A
THD.
4-40
UNC 2A
THD.
.37
.075
Typ.
.075
Typ.
1.313
1.000
1.563
.78
1.078
1.250
.09R
.13R
.130 Typ.
.13R
.130 Typ.
.09R
.52
.86
.86
.52
MRAC 18S-G
MRAC 18P-G
MRAC 20S-G
MRAC 20P-G
PHYSICAL DATA
Plug
Code
No.
Recepticle No. of Wt. in Ozs.
Plug
Code
No.
Recepticle No. of Wt. in Ozs.
Code
No.
Contactsw/o Contacts
Code
No.
Contactsw/o Contacts
Plug Rec.
Plug Rec.
MRAC9P
MRAC9S
9
.15
.17
.17
.17
.42
.42
.17 MRAC41
MRAC41S
41
42
50
66
75
.5
.5
.6
.7
.9
.7
.7
.85
1.05
1.3
1.78
MRAC14P MRAC14S
MRAC18P MRAC18S
MRAC20P MRAC20S
MRAC26P MRAC26S
MRAC34P MRAC34S
14
18
20
26
34
.2
.2
MRAC42P MRAC42S
MRAC50P MRAC50S
.25 MRAC66P MRAC66S
.67 MRAC75P MRAC75S
.67 MRAC104P MRAC104S 104
1.2
GUIDE SOCKETS
How To Order: To obtain “K” or “N”
guides in place of the standard “G” type,
substitute the desired socket style code
letter (“K” or “N”) for “G” in both the Plug
and Receptacle Code Numbers.
Guide
Socket
Actual
Size Photo
Code Letter
G*
For General Use
Phosphor Bronze
K*
N*
Standard Guide
Pin mates with all types
Brass
For High Electrical
Conductivity Beryllium
Copper
For Extra Mechanical
Strength Brass
* For passivated stainless steel add SS suffix
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 3
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
OUTLINE
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
.75
.78
.86
.78
.37
.86
.37
Slot
.038
Wide
Slot
.038
Wide
4-40 UNC
2A THD
.27
.27
.47
.27
.56
.27
4-40 UNC
2A THD
.09R
.075
Typ
.23
.075
Typ
.37
.37
1.625
2.000
1.312
1.375
1.688
1.072
Mounting
holes for
number 4
machine
screws
.09R
.13R
.52
.86
.52
.27
.180 Typ
.130 Typ
.86
MRAC 26S-G
MRAC 26P-G
MRAC 34S-G
MRAC 34P-G
.78
.37
.86
.75
.86
.37
.78
.37
Slot
.038
Slot
.038
Wide
.44
.22
.27
.47
.27
.09R
.23
.27
4-40 UNC
2A THD
.37
Wide
4-40 UNC
2A THD
.075
Typ
.075
Typ
2.625
2.312
2.313
2.125
Mounting
holes for
number 4
machine
screws
1.672
2.000
.73
.09R
.52
.86
.13R
.130 Typ
.86
.52
.180 Typ
MRAC 41S-G
MRAC 41P-G
MRAC 42S-G
MRAC 42P-G
Drawings and corresponding part numbers show G type guide sockets except
for the MRAC104P and S which show JT hardware.
Mounting Note: Connectors MRAC 26, MRAC 20 and smaller, use guides for mounting in a hood or on a
panel. Connectors MRAC 34, MRAC 42, MRAC 50, MRAC 66, and MRAC 75 use four #4 machine screws, in
addition to guides, for mounting in a hood or on a panel. Guides are not recommended for use with MRAC
104. MRAC 104 uses four #6 machine screws for mounting.
*For numerical contact identification instead of alphabetical, order MNAC._______P or S available in sizes 34,
50 and 104. Example MNAC 34P. MRAC 66 and 75 have numerical contact identification as standard.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 4
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
OUTLINE
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
.86
.88
1.125
.50
.25
.78
.37
.09
.86
.37
.78
.75
.27
.47
4-40
UNC
2A THD
.27
.27
.14
.23
.150
Typ
.37
4-40
UNC
2A THD
.27
.37
.075
Typ
Slot
Slot
.038
Wide
.038
Wide
1.97
2.281
2.594
2.719
1.969
1.672
Mounting
holes for
number 4
machine
screws
Mounting
holes for
number 4
machine
screws
1.109
.31R
.86
2.282
.73
.52
.16R
.180 Typ
.180 Typ
.86
.52
MRAC 50S-G
MRAC 50P-G
MRAC 66S-G
MRAC 66P-G
1.531
.88
1.359
.038 Dia. holes
for safety wire
.16
1.234
.80
.37
.86
.78
.37
1.109
.23
.27
.37
.37
.27
.27
.77
.09
.075
Typ
.16
4-40
UNC
.44
.14
Slot
.075
Typ
2A THD
.038
Wide
8-32
6-32
2.282
UNC
2A
2.750
2.375
UNC
.97
2.594
2.719
2A THD.
THD.
2.000
Mounting
holes for
number 4
machine
screws
Mounting
holes for
number 6
machine
screws
.52
1.469
1.094
.16R
.86
.52
.86
.38R
.180 Typ
.16
.16
.180 Typ
MRAC 75S-G
MRAC 75P-G
MRAC 104S-JT *
MRAC 104P-J
Drawings and corresponding part numbers show G type guide sockets except
for the MRAC104P and S which show JT hardware.
Mounting Note: Connectors MRAC 26, MRAC 20 and smaller, use guides for mounting in a hood or on a
panel. Connectors MRAC 34, MRAC 42, MRAC 50, MRAC 66, and MRAC 75 use four #4 machine screws, in
addition to guides, for mounting in a hood or on a panel. Guides are not recommended for use with MRAC
104. MRAC 104 uses four #6 machine screws for mounting.
*For numerical contact identification instead of alphabetical, order MNAC._______P or S available in sizes 34,
50 and 104. Example MNAC 34P. MRAC 66 and 75 have numerical contact identification as standard.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 5
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
JACKSCREWS & JACKSOCKETS
Polarized jackscrews give the ease and
assurance of threaded positive coupling.
The actuating side consists of two turnable
screws, one male and one female, each with
knurled and slotted knobs. On the mating half
are the two fixed screws required to
complete the locking action. When mated,
the jackscrews may be locked with a safety
wire through the hole in the self-locking pin
(in the jackscrew shaft).
OUTLINE
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
6-32 UNC THD. except
size 104/8-32 UNC
4-40 UNC except size
104/6-32 UNC
Mono-
Jackscrew
Side Cable
Opening
Side Cable
Opening
.16
A
.78
B
Jacksocket
052 Dia. Safety
Wire Hole
F
.16
Self Locking
Pin
E
Mono-
Jackscrew
Hood
Jacksocket
C
D
AND
OR
OR
Mating connector half with turnable Mating connector half with Hood and
Mating connector half with Hood and
turnable Monojacks.
Code designation: JTDH, JTDH1
Connector with fixed Jackscrews
Code designation: J
Jackscrews-with-Knobs.
turnable Long Jackscrews-with-
Knobs. Code designation: JTC H,
JTC H1
Code designation: JT
DIMENSIONS
Connector
Size
Dimension E Dimension F
H1 H8 H9 H13 H H1 H8 H9
Dimension A
H1 H8 H9 H13
Dimension B
C
H
–
–
–
–
H
H
–
–
–
–
–
H1 H8 H9
D
MRAC 9
–
–
–
–
.59
.59
.59
.59
–
–
–
–
–
–
–
–
.59
.59
.59
.59
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
.80 1.31
.80 1.31
.80 1.31
.80 1.31
2.41
2.41
2.41
2.41
–
–
–
–
–
–
–
–
2.41
2.41
2.41
2.41
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MRAC 14
MRAC 18
MRAC 20
MRAC 26 .80 .59 .59 .59
MRAC 34 .63 .63 .63 .63
.80 1.31 2.61 2.41 2.41 2.41
–
–
.63 .63 .63 .63 .80 1.31 2.41 2.41 2.41
.80 1.31 2.41 2.41
–
–
–
–
2.41 2.41 2.41
MRAC 41 .63 .63
–
–
–
–
–
–
–
–
–
–
MRAC 42 .58 .58 .58 .58
MRAC 50 .58 .58 .58 .58
–
–
.58 .58 .58 .58 .80 1.31 2.41 2.41 2.41
.58 .58 .58 .58 .80 1.31 2.41 2.41 2.41
–
–
–
–
2.41 2.41 2.41 2.41
2.41 2.41 2.41 2.41
MRAC 66 .69
MRAC 75 .56 .56 .56 .56
MRAC 104 .5 .67
–
–
.69
–
–
–
.5
.56 .56 .56 .56 .80 1.31 2.41 2.41 2.41
.5 .5 .80 1.52 3.42
–
–
.5 .80 1.31 2.41
–
–
2.41
–
3.42
–
–
–
2.41
2.41 2.41 2.41 2.41
3.25 3.25
–
–
2.41
–
–
–
–
–
–
–
–
New Monojacks Assemble and Disassemble With Remarkable Ease and Speed
To free the connector from the hood, simply
remove four screws. Monojacks may be used
on miniature rectangular connectors with from
34 to 104 contacts and with molds featuring
guide hole and two mounting holes on both
ends. Molds have 2 center thru holes and 4
mounting holes.
MONOJACKS ARE CAPTIVATED IN KEYHOLE
SLOT OF HOOD AS SHOWN ABOVE. WHEN
USING SHELLS, MONOJACKS ARE CAPTIVATED
IN KEYHOLE OF SHELL AND CLEARANCE HOLES
ARE PLACED IN HOODS.
MOLDINGS HAVE STRAIGHT THRU HOLES
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 6
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
OUTLINE
JACKSCREW & JACKSOCKETS
Dimensions are for reference only and are subject to change. Outline drawings on request.
.22
Dia.
.19 Dia.
.22 Dia.
.50
.078 INT. HEX.
.25
HEX.
A
A
A
A
JTCW
JTCU
JTCX
JTCZ
.19 Dia.
.22 Dia.
.078 INT. HEX.
.25 HEX.
1
.78
.36
JTW
JTU
JTX
6-32 UNC 2 THD.
(Typ.)
.80 Typ.
6-32 UNC 2 THD.
.16 Typ.
JZ
DIMENSIONS
All jackscrews and sockets are stainless steel, passivated except J & JTD which are nickel plated brass.
All knobs are aluminum, anodized except JTW and JTCW which are stainless steel, passivated.
Hood Type
Type JTCX
H1 H8 H9 H13
Dimension A
Type JTCZ
H1 H8 H9 H13
Dimension A
Type JTCW
H1 H8 H9 H13
Dimension A
Type JTCU
H1 H8 H9 H13
Dimension A
Size
Size
Size
9
2.22 14
2.22 18
Size
H
H
H
H
9
–
–
–
–
2.22
2.22
2.22
2.22
–
–
–
–
–
–
–
2.22
–
–
–
–
2.47
2.47
2.47
2.47
–
–
–
–
–
–
–
2.47
9
–
–
–
–
2.34
2.34
2.34
2.34
–
–
–
–
–
–
–
2.34
2.34
2.34
9
–
–
–
–
2.47
2.47
2.47
2.47
–
–
–
–
–
–
–
2.47
2.47
2.77
14
18
20
2.47 14
2.47 18
14
18
20
2.22 2.22 20
2.47 2.47 20
2.34 2.34
2.47 2.47
26 2.22 2.22 2.22 2.22
34 2.22 2.22 2.22 2.22
–
–
–
–
–
–
–
26 2.47 2.47 2.47 2.47
34 2.47 2.47 2.47 2.47
–
–
–
–
–
–
–
26 2.61 2.34 2.34 2.34
34 2.34 2.34 2.34 2.34
–
–
–
–
–
–
–
26 2.73 2.47 2.47 2.47
34 2.47 2.47 2.47 2.47
–
–
–
–
–
–
–
41 2.22 2.22
–
–
41 2.47 2.47
–
–
41 2.34 2.34
–
–
41 2.47 2.47
–
–
42 2.22 2.22 2.22 2.22
50 2.22 2.22 2.22 2.22
42 2.47 2.47 2.47 2.47
50 2.47 2.47 2.47 2.47
42 2.34 2.34 2.34 2.34
50 2.34 2.34 2.34 2.34
42 2.47 2.47 2.47 2.47
50 2.47 2.47 2.47 2.47
66 2.22
–
–
2.22
66 2.47
–
–
2.47
66 2.34
–
– 2.34
66 2.47
–
– 2.47
75 2.22 2.22 2.22 2.22
75 2.47 2.47 2.47 2.47
75 2.34 2.34 2.34 2.34
75 2.47 2.47 2.47 2.47
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 7
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
OUTLINE
FORMED ALUMINUM HOODS
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
Hoods shown are MRE Hoods for use
with MRAC Connectors
DIMENSIONS
Formed Hoods for MRAC Connectors are
available in top and side opening for most
MRAC Connectors - Deep Drawn Hoods are
available for MRAC 34, MRAC 66 and MRAC
104 connectors ... providing additional strength.
Hoods and cable clamps are of anodized
aluminum. They provide support and strain
relief for the cable and may be applied to either
Plug or Receptacle.
Hoods may be ordered separately (see code
numbers in the tables below) or assembled on
connectors.
Top Cable Opening
Side Cable Opening
Cable
Opening
Cable
Opening
DIMENSIONS
Wt.
Oz.
.3
Fits
Connector
Code No.
Code
No.
MRE9H-1
MRE9H-9
DIMENSIONS
Wt.
Oz.
Fits
Connector
A
B
C
D
E
F
G
A
B
C
D
E
F
G
.28 1.28 1.63 1.31 .44 .31D
–
MRE9H-13 .28 1.28 1.58 1.31 .44 .59 .31 .3 MRAC9 (P or S)
MRE14H-13 .28 1.28 1.58 1.25 .5 .59 .38 .3 MRAC14 (P or S)
MRE18H-13 .28 1.28 1.78 1.31 .63 .61 .44 .3 MRAC18 (P or S)
MRE20H-13 .28 1.28 1.58 1.56 .5 .66 .38 .3 MRAC20 (P or S)
.28 1.28 1.72 1.63 .64 .59 .38 .4
MRE26H-8 .28 1.28 1.78 1.63 .64 .78 .44 .4 MRAC26 (P or S)
.28 1.28 1.61 1.31 .44 .59 .31 .3 MRAC9 (P or S)
.3
MRE14H-9 .28 1.28 1.55 1.25 .5 .59 .38 .3 MRAC14 (P or S)
MRE18H-1 .28 1.28 1.75 1.31 .63 .44D .3
MRE18H-9 .28 1.28 1.81 1.31 .63 .69 .44 .3 MRAC18 (P or S)
MRE20H-1 .28 1.28 1.56 .5 .38D .3
MRE14H-1 .28 1.28 1.69 1.25 .5 .38D
–
–
MRE26H
2
–
MRE34H
MRE34H-8 .28 1.25 1.75
MRE41H
MRE42H
.28 1.25 1.69
2
2
.83 .66D
–
.6
MRE20H-9 .28 1.28 1.86 1.56 .5 .66 .38 .3 MRAC20 (P or S)
MRE26H-1 .28 1.28 2.06 1.63 .64 .59 .38 .4
MRE26H-9 .28 1.28 2.13 1.63 .64 .78 .44 .4 MRAC26 (P or S)
.83 1.06 .56 .6 MRAC34 (P or S)
.28 1.25 1.69 2.63 .5 .66 .44 .6 MRAC41 (P or S)
.09 1.30 1.73 2.31 .83 .63D .7
–
MRE34H-1 .28 1.25 2.42
MRE34H-9 .28 1.25
MRE41H-1 .28 1.25 3.06 2.63 .5 .66 .44 .6 MRAC41 (P or S)
MRE42H-1 .09 1.30 2.73 2.31 .83 .63 .5 .7
2
2
.83 .66D
.83 .81 .56 .6 MRAC34 (P or S)
–
.6
MRE42H-8 .09 1.30 1.80 2.31 .83 1.06 .56 .7 MRAC42 (P or S)
MRE50H .09 1.30 1.73 2.59 .83 .63D .8
MRE50H-8 .09 1.30 1.80 2.59 .83 1.06 .56 .8 MRAC50 (P or S)
MRE75H .09 1.31 1.75 2.59 1.19 .63 .88 1.0
–
–
MRE42H-9 .09 1.30
MRE50H-1 .09 1.30 3.02 2.59 .83 .63 .5 .8
MRE50H-9 .09 1.30 2.59 .83 1.06 .56 .8 MRAC50 (P or S)
MRE75H-1 .09 1.31 3.02 2.59 1.19 .63 .88 1.0
MRE75H-9 .09 1.31 2.59 1.19 .88 1.0 MRAC75 (P or S)
–
2.31 .83 .84 .56 .7 MRAC42 (P or S)
MRE75H-8 .09 1.31 1.86 2.59 1.19
1
.88 1.0 MRAC75 (P or S)
–
–
1
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 8
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
Lock Tabs (MRE-V shown)
Lever & Pivot Assemblies (MRE-VL shown)
VIBRATION LOCKS
Designed for MRAC connectors, this vibration
lock features genuine simplicity of design, plus
complete locking effectiveness. Assembly of
either the lever-and-pivot assembly or the lock
parts to the plug and receptacle is quick and easy.
The unit locks automatically when the mating plug
and receptacle are engaged. Unlocking and
disengaging can be done with one hand.
Nomenclature
Lever
& Pilot
Lock Tabs
(See Note)
Used on
Connectors
Assembly
MRAC 9, 14,
18, 20, 26, 34,
41, and 42
MRE-VL
MRE-V
Note 1:When panel mounting the lock-tab half of a MRAC 34, MRAC 42 or MRAC 50 connector, flat washers
(.033 minimum thickness) should be used on the mounting screws to shim the molding away from the panel.
Note 2: Each code number indicates two units, i.e., the “MRE-VL” consists of two levers and two pivots
(unassembled*), and the “MRE-V” consists of two tabs.
MRAC 50
MRAC 75
MRE-VL2
MRE-V2
Note 3: These units are supplied unassembled to facilitate handling. The pivot is easily assembled to the
lever merely by inserting the hooked end through the lever opening. It will automatically snap into proper
position. Patent #2,760,174.
DIMENSIONS / OUTLINE
DRAWN ALUMINUM HOODS
Hoods shown are MRA Hoods for use with MRAC Connectors
DIMENSIONS - TopOpening
Wt.
Oz.
Fits
Connector
DIMENSIONS - SideOpening
Wt.
Oz.
Fits
Connector
Code No.
Code No.
A
B
C
D
E
H
G
A
B
C
D
E
H
G
MRAC 34P
MRAC 34S
MRAC 66P
MRAC 66S
MRAC 34P
MRAC 34S
MRAC 66P
MRAC 66S
MRA 34H-491 2.08 .83 1.17 1.59 .66 x .75
–
1.688 .6
1.969 .8
2.375 1.0
MRA 34H9-491 2.08 .83 1.17 2.59 .64 x .75 1.06 1.688 .6
MRA 66H
2.38 1.22 1.17 1.69 1.03 Dia.
2.84 1.63 2.23 2.75 1.19 Dia.
–
–
MRA 66H9
2.38 1.22 1.17 2.92 .84 Dia. 1.34 1.969 .8
2.84 1.63 2.23 3.39 1.19 Dia.1.63 2.375 1.0
.1935 Dia. 2 Holes
MRAC 104P
MRAC 104S
MRAC 104P
MRAC 104S
MRA 104H
MRA 104H9
For MRA;
66;104
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
(.228 Dia. 2 Holes For 104)
D
C
.08
H
B
G
D
E
G
A
Cable
Opening
E
C
Cable
Opening
B
.08
A
.08
DIMENSIONS / OUTLINE
MOUNTING BRACKETS
For MRA 34 Only
Top Cable Opening
Side Cable Opening
H
Wt.
Oz.
DIMENSIONS
Code No.
F
A
B
G
A
B
C
D
E
F
G
H
E
.128 Dia 3 Holes
(No. 4 Mounting
Screw)
MRE 50B 1.06 .688 3.031 3.44 .13 .28 .78
.4
.6
.150 Dia 3 Holes
2.625
.11R
MRE 75B 1.48 1.047 3.062 3.56 .14 .30 1.14 (No. 6 Mounting
C
Screw)
D
Panel
Opening
MRAC 50 and MRAC 75 connectors
use the standard MRE 50 and
MRE 75 mounting brackets.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 9
Rack & Panel
Miniature Rectangular, Removable Contacts
MRAC Series
ORDERING INFORMATION
Omit steps not required
H
34
G
VL
MRAC
S
■ Step 1
■ Step 2
■ Step 3
■ Step 4
■ Step 5
■ Step 6
■ Step 7
Series:
MRAC
Number of
Contacts:
9, 14, 18, 20,
26, 34, 41,
42, 50, 66,
75, 104
Contact
Designation:
P - Pin
S - Socket
When ordering
moldings less
hardware to be
used with
monojacks, see
note 2 below.
Guides and Hoods:
Jackscrew
Vibration Locks: Special
Options:
H - Standard top opening.
V - Lock Tab
Locks:
(See bottom
Chart)
Sizes 26 thru 104 only.
H1 - Standard side opening.
Available all sizes.
Consult Sales
Department
V2 - Lock Tab
(Size 50
MNAC
Numerical
contact
identification
on sizes 34,
50, and 104.
& 75)
VL - Lever & Pivot
Ass’y
H8 - Large top opening.
Sizes 26 thru 104 only.
See note 1
below.
H9 - Large side opening.
Available all sizes.
H13 -Large top opening,
high hood. Sizes 9, 14,
18 & 20 only.
VL2 - Lever & Pivot
Ass’y (Size
50 & 75)
■ Step 4
Guides
G*
K
**JZ
Same as J but with 6-32 mtg. thd. (Std. on
104)
Phosphor Bronze Cylindrical Guides
Beryllium Copper Cylindrical Guides
Brass Cylindrical Guides
**JTW Same as JT but with knurled round knob
with internal hex (not avail. 104)
**JTU Same as JT but with knurled round knob
N*
Guides are not recommended for Size 104
“P” indicates two guide pins or two jackscrews
(EX. JTCP)
“S” indicates two guide sockets or two jacksockets
(Ex. GS)
with screwdriver slot (not avail. 104)
**JTX Same as JT but with hex knob (not avail.
104)
**JTCW Same as JTC but with knurled round knob
with internal hex (not avail. 104)
**JTCU Same as JTC but with knurled round knob
Jackscrew Locks
with screwdriver slot (not avail. 104)
***J
JT
Polarized Fixed Jackscrew and Jacksocket
Polarized Short Turning Jackscrew and
Jacksocket
**JTCX Same as JTC but with hex knob (not avail.
104)
**JTCZ Same as JTC but with prybar knob (not
avail. 104)
JTC
Polarized Long Turning Jackscrew and
Jacksocket
***JTD
Polarized Long Turning Mono-Jackscrew and
Mono-Jacksocket for Sizes 34, 42, 50, 66,
75, and 104 only.
*
For passivated stainless steel add SS suffix.
** Request availablity information.
***Material: Nickel Plated Brass standard
Notes: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel
2. When ordering molding less hardware and hood for use with JTD Monojacks, connectors
must be ordered as follows:
Pin connector = MRAC 34P8, MRAC 42P8, etc.
Socket connector = MRAC 34S8, MRAC 42S8, etc.
The number “8” indicates special housing for use with the JTD Monojack hardware
(available on sizes 34, 42, 50, 66, 75 and 104).
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 10
相关型号:
©2020 ICPDF网 联系我们和版权申明