XAC104PK0C000 [WINCHESTER]
Rack and Panel Connector, 104 Contact(s), Male;型号: | XAC104PK0C000 |
厂家: | Winchester Electronics Corporation |
描述: | Rack and Panel Connector, 104 Contact(s), Male 连接器 |
文件: | 总10页 (文件大小:302K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
XAC34SF2A010
XAC34PM1A000
XAC34PC1A700
Designed for external installation, the XAC is
the MRAC removable contact connector
equipped with protective shells and mounting
plates for chassis or cable mounting on metal
containers, bulkheads, or any outside surface
equipment. Lighter and smaller than other
external connectors, they provide dependable
service under adverse conditions. Inserts are
housed in protective shells and there is screw
lock coupling of plug and receptacle.
SPECIFICATIONS
Current Rating: Up to 13 amps
No. of
Dielectric:
Diallyl Phthalate, MIL-M-14,
Type SDG-F, Color Gray
Contacts:
9, 14, 18, 20, 26, 34, 42, 50,
66, 75, 104
Contacts must be ordered
separately. Select from
crimp, solder, dip solder,
shielded or wire wrap
terminations.
Polarization: Seven positions available for
pin and slot polarization on
shells. Additional polariza-
tion can be provided with
various arrangements of
jackscrews and guides.
Accessories: Shells, formed and drawn
hoods, mounting plates,
Contacts:
Electrical Data: Meets high potential
performance requirements of
jackscrews and jacksockets.
MIL-C-28748. The dielectric
withstanding voltage is one
minute electrification at
2000 VAC.
Military versions are QPL’d to
M28748/3 and M28748/4.
CATALOG NO.
CATALOG NO.
CATALOG NO.
XMRE75-0400XS MS 18192SXX XJMS603P
MS 18196-3
MS 18196-4
MS 18197-1
MS 18197-2
MS 18197-3
MS 18197-4
MS 18198-1
MS 18198-2
MS 18199-1
MS 18199-2
MS 18199-3
MS 18199-4
MS 18200-1
MS 18200-2
XAC9-0300X
MS 18192-T8
XAC14-0300X
XAC20-0300X
XMRE9-0400X
XMRE14-0400X
XMRE20-0400X
XMRE26-0300X
XMRE26-0400X
XMRE34-0300X
XMRE34-0400X
XMRE42-0300X
XMRE42-0400X
XMRE50-0300X
XMRE50-0400X
MS 18192-T1
MS 18192-T2
MS 18192-S8
MS 18192-S1
MS 18192-S2
MS18192-T9
MS 18192-S9
MS18192-T3
MS 18192-S3
MS 18192-T4
MS 18192-S4
MS18192-T5
MS 18192-S5
XMRE75-0400XP MS 18192-S6
XJMS603S
XMRA66-0700
XMRA66-0800
XMRA 104-0700
XMRA 104-0800
XJTCMS605P
XJTCMS605S
XJTCMS608P
XJTCMS608S
XJTMS605P
XJTMS605S
XJTMS606P
XJTMS606S
XJMS602P
MS 18193-T1
MS 18193-S1
MS 18193-T2
MS 18193-S2
MS 18194-1
MS 18194-2
MS 18194-3
MS 18194-4
MS 18195-1
MS 18195-2
MS 18195-3
MS 18195-4
MS 18196-1
MS 18196-2
XNMS700P
XNMS700S
XNMS702P
XNMS702-S
XMRA 14-0010
XMRA 20-0010
XMRA 34-0010
XMRA42-0010
XMRA50-0010
XMRA75-0010
XMRA66-0010
XMRA104-0010
XMRE75-0300XP MS 18192-T6
XMRE75-0300XS MS 18192-TXX XJMS602S
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 11
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
CONNECTOR ASSEMBLIES
Self-locking
pins
Turnable
Jacksocket
Jackscrew
and
Jacksocket
Knobs
Plug Shell
Male Insert
Turnable
Jackscrew
Fixed
Jackscrew
Receptacle Shell
Mounting Plate
Female Insert
Fixed
Jacksocket
Receptacle
DEFINITIONS OF
CONNECTOR TERMS
Plug: The complete connector half which
Female Insert: The molded insulator body
has the plug shell as part of its assembly.
containing socket contacts.
Receptacle: The complete connector half
which has the receptacle shell as part of its
assembly.
Pin Contacts: Male Contacts that fit into the
socket contacts.
Socket Contacts: Female Contacts tubular
Shell: The metal housing in which a male or
in shape, which receive the pin contacts and
female insert is assembled. A shell is either a retain them by spring tension.
plug shell or a receptacle shell:
Polarization: A means of controlling the
engagement of a plug and receptacle so that
correct mating of the contacts is achieved.
Plug Shell - one which is designed to be
inserted into a receptacle shell.
Receptacle Shell - one which is designed
to receive and enclose the plug shell upon
engagement.
Accessories: Those components such as
hoods and mounting plates which are
attachable to a plug or receptacle to facilitate
mounting and/or handling of the connector,
and to prevent inadvertent cross-mating.
Male Insert: The molded insulator body
containing pin contacts.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 12
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
CONTACT ARRANGEMENTS
Dimensions are for reference only and are subject to change. Outline drawings on request.
Views are rear (wiring end) of female inserts. (Male inserts are opposite.)
.44
.22
.44
.56
.38
.075
Typ
.075
Typ
.075
Typ
.075
Typ
1.250
.937
1.313
1.313
1.000
1.000
1.563
1.250
.09R
.13R
.130 Typ
.09R
.13R
.130 Typ
.09R
.09R
.13R
.130 Typ
.172 Typ
XAC 9
XAC 14
XAC 18
XAC 20
.75
.47
.23
.56
.75
.47
.88
.75
.47
.23
.09R
.075
Typ
.075
Typ
.075
Typ
.23
.09R
.23
.075
Typ
1.625
1.312
2.594
2.000
1.688
2.313
2.282
2.719
2.000
Mounting
Holes For
No. 4
Machine
Screws
Mounting
Holes For
No. 4
Machine
Screws
Mounting
Holes For
No. 4
Machine
Screws
.73
.16R
.180 Typ
.73
.09R
.13R
.130 Typ
.180 Typ
.180 Typ
XAC 26
XAC 34*
XAC 42
XAC 50*
1.531
.88
1.234
1.109
.77
1.125
.50
.25
.44
.23
.150
Typ
.075
Typ
.075
Typ
2.750
2.375
2.719
2.281
1.969
2.282
2.594
Mounting
Holes For
No. 4
Machine
Screws
Mounting
Mounting
Holes For
No. 4
Holes For
No. 6
Machine
Screws
Machine
Screws
1.094
.16R
.31R
.38R
.180 Typ
1.109
1.469
.180 Typ
.180 Typ
XAC 66
XAC 75
XAC 104*
*For numerical contact identification instead of alphabetical, order XNAC**P or S available in
sizes 34, 50, and 104.
Sizes 66 and 75 have numerical contact identification as standard.
The spacing, arrangement, and identificaion of contacts of the XAC inserts are the same as those
found on the Series MRAC removable contact connectors for the same number of contacts.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 13
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
JACKSCREW & JACKSOCKETS
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
Views are rear (wiring
of female inserts. (Mal
inserts are opposite.)
.73
Fixed Jackscrews (F)
Long Turning Jackscrews (C)
Used With Hoods
Short Turning Jackscrews (M)
Used Only Without Hoods
Monojacks (D)
Used With Hoods
SPECIFICATIONS
Turnable jackscrew-jacksocket combination (M,
C, or D) assembles on either Plug or Recep-
tacle; the mating connector-half (either
Receptacle or Plug) must then contain fixed
jackscrew-jacksocket combination (F).
Monojacks (D) are long turning one-peice
locking devices with slotted and knurled head.
Shaft has through-hole for safety wire.
available with hoods only, in sizes 34, 42, 50,
66, 75, and 104.
Both short and long turning jackscrews (M and C)
have knurled and slotted knobs for locking by
hand or screwdriver. Knob is assembled on shaft
with hollow, removable, self-locking pin. Safety
wiring of engaged halves is achieved by using
the through-hole in self-locking pin in the knob.
Drawings show extension of standard knobs
beyond shell and beyond hood.
APPLICATIONS
Jackscrew locking device assures positive
coupling of engaged connectors to prevent
accidental disconnecting from vibration or
physical shock. It also aids easy connection
and separation of connector plug and
receptacle. Mounted connector-half houses
one non-turnable fixed jackscrew and
jacksocket to insure connector polarization.
Mating-half houses one of the three types of
turning jackscrew and jacksocket (M, C, or D).
LOCKING DEVICE
SPECIFICATIONS
WT. OZ.
CODE See Notes MATERIAL AND
Note 1: Weights are for pairs; i.e. for a
jackscrew and jacksocket, etc., so
weight figure may be added once to
weights of other accessories when
computing total weight of plug or
receptacle.
LETTER
1 & 2
FINISH
Jackscrew
Nickel Plated Brass
Fixed
F
0.15
}
Jacksocket
Note 2: Weights of turnable jack-
screws and turnable jacksockets
include knob and rollpins, except
mono-jackscrew and mono-jacksocket,
which is a one-piece construction (shaft
and knob made in one piece); weight of
fixed jackscrew and jacksocket
includes nuts.
Jackscrew
Jacksocket Turnable
Jackscrew Long
Jacksocket Turnable
Mono-Jackscrew
Long Turnable
Mono-Jacksocket
Short
Stainless Steel with
Passivating Dip
Stainless Steel with
Passivating Dip
M
C
0.30
0.45
}
}
D
1.07
—
Nickel Plated Brass
Aluminum Anodized
Knob Standard
—
DIMENSIONS
Standard Knobs - Extension
Beyond Hood
Dimension A
Dimension B
XAC 9* 14* 18* 20* 26 34 42 50 66 75 104 34 42 50 66 75 104
0300 .55 .55 .55 .55 .77 .58 .53 .53
0400 .55 .55 .55 .55 .55 .58 .53 .53
–
–
.52
.52
–
–
–
.59 .55 .55
.59 .55 .55
–
–
.53
.53
–
–
–
0700
0800
–
–
–
–
–
–
–
–
–
–
.58
.58
–
–
–
–
.64
.64
.52
.52
–
–
–
–
–
–
.38
.38
.38
.38
–
–
*On sizes 9, 14, 18, and 20, only large top opening hoods are available when (c) long turning jackscrews are used.
Catalog Number for large top opening hoods is - 0300X. Example: XAC20-0300X
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 14
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
OUTLINE - JACKSCREWS
.19 Dia.
.50
.22
Dia.
.22
Dia.
.078 INT. HEX.
.25
HEX.
A
A
A
A
CW
CU
CX
CZ
.19
Dia.
.22
Dia.
.97
.33
Dimensio
are subje
on reque
MW
MU
.25 HEX.
.73
MX
DIMENSIONS
All jackscrews and sockets are stainless
steel, passivated (except F & D which
are nickel plated brass). All knobs are
aluminum, anodized except MW and CW
which are stainless steel, passivated.
Hoods
Hoods
Size
Size
0300 0400 0300X 0400X 0700 0800
Dimension A – Type CW
0300 0400 0300X 0400X 0700 0800
Dimension A – Type CX
9
–
–
–
–
.36
.36
.36
.36
.36
.36
.36
.36
.36
.39
.34
.34
–
.36
.36
.36
.36
.36
.39
.34
.34
–
–
–
–
–
–
.47
–
–
.47
–
–
–
–
–
–
9
–
–
–
–
.48
.48
.48
.48
.48
.48
.48
.48
.48
.52
.47
.47
–
.48
.48
.48
.48
.48
.52
.47
.47
–
–
–
–
–
–
.61
–
–
.61
–
–
–
–
–
–
.61
–
–
.61
–
14
18
20
14
18
20
26 .36 .36
34 .39 .39
42 .34 .34
50 .34 .34
26 .77 .48
.47 34 .52 .52
–
–
42 .47 .47
50 .47 .47
.47 66
66
–
–
–
–
75 .33 .33
.33
.33
–
75 .45 .45
.45
.45
Dimension A – Type CU
Dimension A – Type CZ
9
–
–
–
–
.61
.61
.61
.61
.61
.61
.61
.61
.61
.64
.59
.59
–
.61
.61
.61
.61
.61
.64
.59
.59
–
–
–
–
–
–
.72
–
–
.72
–
–
–
–
–
–
9
–
–
–
–
.61
.61
.61
.61
.61
.61
.61
.61
.61
.64
.59
.59
–
.61
.61
.61
.61
.61
.64
.59
.59
–
–
–
–
–
–
.72
–
–
.72
–
–
–
–
–
–
.72
–
–
.72
–
14
18
20
14
18
20
26 .61 .61
34 .64 .64
42 .59 .59
50 .59 .59
26 .92 .61
.72 34 .64 .64
–
–
.72 66
–
42 .59 .59
50 .59 .59
66
–
–
–
–
75 .58 .58
.58
.58
75 .58 .58
.58
.58
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 15
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
OUTLINE
HOODS - DRAWN ALUMINUM
Dimensions are for reference only and
abt tc. tiai
.08
.08
Top Cable Opening
.08
Side Cable Opening
DIMENSIONS
XMRA Drawn Hoods for use with
XAC Connectors.
Hoods - Side Cable Opening
Hood
Part No.
(If ordered
separately)
ForUse
With
DIMENSIONS
A
B
C
D
E
F
G
Type C Jack
Sockets and
Jackscrews
XMRA 34-0800
XMRA 66-0800
XMRA 104-0800
2.09 .84 1.17 2.58 .64x.75 1.688 1.06
2.38 1.22 1.17 2.91 .84D 1.969 1.34
2.84 1.63 2.23 3.38 1.19D 2.375 1.63
XMRA 34-0800D 2.09 .84 1.17 2.58 .64x.75 1.688 1.06
XMRA 66-0800D 2.38 1.22 1.17 2.91 .84D 1.969 1.34
XMRA 104-0800D 2.84 1.63 2.23 3.38 1.19D 2.375 1.63
Type D Jack
Sockets and
Jackscrews
XMRA 34-0200
XMRA 66-0200
XMRA 104-0200
2.09 .84 1.17 2.58 .64x.75
2.38 1.22 1.17 2.91 .84D
2.84 1.63 2.23 3.38 1.19D
–
–
–
1.06
1.34
1.63
Type F
Jackscrews
Hoods - Top Cable Opening
Hood
ForUse
Part No.
(If ordered
With
DIMENSIONS
separately)
A
B
C
D
E
F
Type C Jack
Sockets and
Jackscrews
XMRA 34-0700
XMRA 66-0700
XMRA 104-0700
2.09 .84 1.17 1.59 .66x.75 1.688
2.38 1.22 1.17 1.69 1.03D 1.969
2.84 1.63 2.23 2.75 1.19D 2.375
XMRA 34-0700D 2.09 .84 1.17 1.59 .66x.75 1.688
XMRA 66-0700D 2.38 1.22 1.17 1.69 1.03D 1.969
XMRA 104-0700D 2.84 1.63 2.23 2.75 1.19D 2.375
Type D Jack
Sockets and
Jackscrews
XMRA 34-0900
XMRA 66-0900
XMRA 104-0900
2.09 .84 1.17 1.59 .66x.75
2.38 1.22 1.17 1.69 1.03D
2.84 1.63 2.23 2.75 1.19D
–
–
–
Type F
Jackscrews
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 16
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
OUTLINE
HOODS - FORMED ALUMINUM
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
Top Cable Opening
Large Top Cable Opening
Side Cable Opening
DIMENSIONS
Hoods - Top Cable Opening
XMRE Formed Hoods for use
with XAC Connectors
For use with
Type C
Wt.
For use with
Fixed
Jackscrews*
Cable
Oz.
Dimensions
Opening
Jacksockets &
(Inc. 2
For use
Cable
Jackscrews
with
Clamps
E
F
Hood Part No.
Monojacks
and
A
B
C
D
(If ordered separately)
Dia. Dia.
Screws)
XAC 9-0300X
XAC 9-0500XJ
1.28 1.31 1.58
1.28 1.25 1.58
1.28 1.31 1.78
1.28 1.56 1.58
1.28 1.63 1.72
1.28 1.63 1.78
.44
.50
.63
.50
.64
.64
.83
.83
.83
.83
.83
.83
1.19
1.19
.59
.59
.61
.66
.59
.78
.66
1.06
.63
1.06
.63
1.06
.63
1
.31
.38
.44
.38
.38
.44
–
.56
–
.56
–
0.3
0.3
0.4
0.3
XAC 14-0300X
XAC 18-0300X
XAC 20-0300X
XMRE 26-0300
XMRE 26-0300X
XMRE 34-0300
XMRE 34-0300X
XMRE 42-0300
XMRE 42-0300X
XMRE 50-0300
XMRE 50-0300X
XMRE 75-0300
XMRE 75-0300X
XAC 14-0500XJ
XAC 18-0500XJ
XAC 20-0500XJ
XMRE 26-0500J
XMRE 26-0500XJ
XMRE 34-0500J
XMRE 34-0500XJ
XMRE 42-0500J
XMRE 42-0500XJ
XMRE 50-0500J
XMRE 50-0500XJ
XMRE 75-0500J
XMRE 75-0500XJ
0.4
0.6
0.7
0.8
1.0
XMRE 34-0300D
XMRE 34-0300XD
XMRE 42-0300D
XMRE 42-0300XD
XMRE 50-0300D
XMRE 50-0300XD
XMRE 75-0300D
XMRE 75-0300XD
1.25
1.25
2
2
1.69
1.75
1.30 2.31 1.73
1.30 2.31 1.80
1.30 2.59 1.73
1.30 2.59 1.80
1.31 2.59 1.75
1.31 2.59 1.86
.56
.88
.88
* For use with G, K, or N guides, eliminate letter “J” from part number
Hoods - Side Cable Opening
For use with
Type C
Jacksockets &
Jackscrews
Hood Part No.
(If ordered separately)
Wt.
For use with
Cable
Opening
Oz.
(Inc. 2
Cable
Clamps
and
Fixed
Dimensions
For use
with
Monojacks
Jackscrews*
E
F
A
B
C
D
Dia. Dia. Screws)
XMRE 9-0400
XMRE 9-0600J
1.28 1.31 1.63
.44
.31
–
XMRE 9-0400X
XMRE 14 -0400
XMRE 14-0400X
XMRE 18-0400
XMRE 18-0400X
XMRE 20-0400
XMRE 20-0400X
XMRE 26-0400
XMRE 26-0400X
XMRE 34-0400
XMRE 34-0400X
XMRE 42-0400
XMRE 42-0400X
XMRE 50-0400
XMRE 50-0400X
XMRE 75-0400
XMRE 75-0400X
XMRE 9-0600XJ
XMRE 14-0600J
XMRE 14-0600XJ
XMRE 18-0600J
XMRE 18-0600XJ
XMRE 20-0600J
XMRE 20-0600XJ
XMRE 26-0600J
XMRE 26-0600XJ
XMRE 34-0600J
XMRE 34-0600XJ
XMRE 42-0600J
XMRE 42-0600XJ
XMRE 50-0600J
XMRE 50-0600XJ
XMRE 75-0600J
XMRE 75-0600XJ
1.28 1.31 1.61
1.28 1.25 1.69
1.28 1.25 1.55
1.28 1.31 1.75
1.28 1.31 1.81
.44
.5
.5
.38
.38
.5
.59
.38
.59
.44
.69
.38
.66
.59
.78
.66
.81
.63
.84
.63
1.06
.63
1
.31
–
.38
–
.44
–
.38
.38
.44
–
.56
.5
.56
.5
.56
.88
.88
0.3
0.3
0.4
0.3
0.4
0.6
0.7
0.8
1.0
1.28 1.56
2
1.28 1.56 1.86
1.28 1.63 2.06
1.28 1.63 2.13
.5
.64
.64
.83
.83
.83
.83
.83
.83
1.19
1.19
XMRE 34-0400D
XMRE 34-0400XD
XMRE 42-0400D
XMRE 42-0400XD
XMRE 50-0400D
XMRE 50-0400XD
XMRE 75-0400D
XMRE 75-0400XD
1.25
1.25
2
2
2.42
2.50
1.30 2.31 2.73
1.30 2.31 2.81
1.30 2.59 3.02
1.30 2.59 3.09
1.31 2.59 3.02
1.31 2.59 3.14
* For use with G, K, or N guides, eliminate letter “J” from part number
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 17
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC Series
OUTLINE
SHELLS - RECEPTACLES
Dimensions are for reference only and
are s
on req
B
B
C
C
..140 Dia.
4 Holes
.06R
.03R
.20 R.
.421 R.
B
C
.384 R.
B
C
.06R
.14R
.120 Dia.
Mtg. Hole
Style 9
F
B
C
.28
E D
E D
E D
E D
.06R
E D
A
.06R
.06R
.156 Typ.
.312 Typ.
.06R
.06R
.150 Dia.
6 Holes
.120 Dia.
6 Holes
.120 Dia.
4 Holes
G
.875
.117
G
.500
.120 Dia.
2 Holes
.114
.14R
Polarizing Slot
.383
.766
G
For All XAC
Configurations
For XAC 9 to 26
For XAC 34, 42,
and 50
For XAC 66
For XAC 75
For XAC 104
DIMENSIONS
SHELLS - RECEPTACLES
Important Note When Ordering
Plug and Receptacle Shells
The shell part numbers given in the
table show an asterisk (*) where the
code letter for the desired polarizing XMRE 18-2*000 1.45 .70
position belongs - example:
XMRE9-2*000 becomes XMRE9-
2B000 when polarization in position
“B” is desired. Specify the same
position on the mating shell.
Shell Part No.
(If ordered
DIMENSIONS
Wt.
separately)
A
B
C
D
E
F
G
–
–
–
–
–
Oz.
0.15
0.16
0.17
0.19
0.23
XMRE 9-2*000
XMRE 14-2*000 1.39 .58
1.45 .52
.38 1.000 .88 .66
.45 .937 .81 .66
.58 1.000 .88 .66
.45 1.250 1.13 .66
.58 1.312 1.19 .66
XMRE 20-2*000 1.70 .58
XMRE 26-2*000 1.77 .70
XMRE 34-2*000
XMRE 34-4*000 2.14 .89
XMRE 42-2*000
XMRE 42-4*000 2.45 .89
XMRE 50-2*000
XMRE 50-4*000 2.86 1.02 .75 2.282 2.03 .66 .234 0.30
XMRA 66-2*000
.75 1.687 1.44 .66 .234 0.25
.75 2.000 1.75 .66 .234 0.28
For non-polarized shells, merely
omit this position, e.g. XMRE9-2000.
XMRA 66-4*000 2.42 1.27 1.13 1.969 1.72 .66 .250 0.28
XMRE 75-2*000
TYPICAL SHELLS FOR
MONOJACKS STYLE No. 4000
Shells are .040 in. thick.
XMRE 75-4*000 2.86 1.38 1.11 2.282 2.03 .66
–
0.32
XMRA 104-2*000
XMRA 104-4*000 2.91 1.69 1.48 2.375 2.13 .66 .437 0.30
Shells are aluminum, anodized for
protection against corrosion. Either
shell style - plug or receptacle - may be
used to house the female insert, thus
allowing the “live” socket contacts to be
cable or panel mounted, as desired.
Shells also provide a means by which
connector polarization is accomplished
- the receptacle shell is slotted for
engaging a polarizing pin on the plug
shell. Any of seven positions (A, B, C,
D, E, F or G) may be specified for
polarization; non-polarized shells have
the slot and pin omitted.
B Dia.
4 Corner
Holes
B Dia.
4 Corner
Holes
C Typ.
C Typ.
2 Slots
4 Slots
A
A
For Connector Size
34, 42, 50, 66, 75
104
A
B
C
.11 .120 .06R
.14 .150 .07R
For XAC 34, 42, 50, 66,
and 104 Configurations
For XAC 75
Configuration
Receptacle Shell
Style No. 2000
Shells are .040 in. thick.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 18
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC SERIES
OUTLINE
SHELLS - PLUGS
Dimensions are for reference only and are subject to change. Outline drawings on request.
B
C
.06R .03R
B
C
.140 Dia.
4 Holes
B
C
B
C
.06R
.120 Dia.
4 Holes
.14R
Mtg. Hole
Style 9
B
C
F
.508
D E
D E
D E
D E
A
D E
.156 Typ.
.312 Typ.
.06R
.06R
.06R
.06R
.06R
.120 Dia.
6 Holes
Polarizing Pin
.150 Dia.
6 Holes
G
.468
.14R
.372 R.
.120 Dia.
2 Holes
.120 Dia.
4 Holes
.20 R.
G
.500
.117
.383
.766
.421 R.
.120 Dia.
2 Holes
G
.875
For XAC 104
For XAC 75
For XAC 66
For XAC 34, 42,
and 50
For XAC 75
For XAC 9 to 26
For All XAC
Configurations
DIMENSIONS
Important Note When Ordering
Plug Shells
Shell Part No.
(If ordered
DIMENSIONS
Wt.
Oz.
separately)
A
B
C
D
E
F
G
–
–
–
–
–
XMRE 9-1*000
1.44 .5
.38 1.000 .88 .63
.45 .937 .81 .63
.58 1.000 .88 .63
.45 1.250 1.13 .63
.58 1.312 1.19 .63
0.14
0.15
0.16
0.18
0.22
The shell part numbers given in the table
shows an asterisk (*) where the code
letter for the desired polarizing position
belongs - example: XMRE9-1*000
becomes XMRE9-1B000 when
polarization in position “B” is desired.
Specify the same position on the mating
shell.
XMRE 14-1*000 1.38 .56
XMRE 18-1*000 1.44 .69
XMRE 20-1*000 1.69 .56
XMRE 26-1*000 1.75 .69
XMRE 34-1*000
XMRE 34-3*000 2.13 .88
XMRE 42-1*000
XMRE 42-3*000 2.44 .88
XMRE 50-1*000
.75 1.687 1.44 .66 .234 0.24
.75 2.000 1.75 .66 .234 0.26
.75 2.282 2.03 .66 .234 0.28
For non-polarized shells, merely omit
this position, e.g. XMRE9-1000.
XMRE 50-3*000 2.84
1
XMRA 66-1*000
Shells are .040 in. thick.
XMRA 66-3*000 2.41 1.25 1.13 1.969 1.72 .66 .250 0.28
XMRE 75-1*000
Stainless steel shells available for 66 and
104 sizes. Dimensions vary from those
shown for aluminum shells. Check sales
for availability and dimensions on all sizes.
XMRE 75-3*000 2.84 1.36 1.11 2.282 2.03 .66
–
0.30
XMRA 104-1*000
XMRA 104-3*000 2.88 1.66 1.48 2.375 2.13 .66 .437 0.30
TYPICAL SHELLS FOR
MONOJACKS STYLE No. 3000
Shells are aluminum, anodized for
protection against corrosion. Either
shell style - plug or receptacle - may be
used to house the female insert, thus
allowing the “live” socket contacts to be
cable or panel mounted, as desired.
Shells also provide a means by which
connector polarization is accomplished
- the receptacle shell is slotted for
engaging a polarizing pin on the plug
shell. Any of seven positions (A, B, C,
D, E, F or G) may be specified for
polarization; non-polarized shells have
the slot and pin omitted.
B Dia.
4 Corner
Holes
B Dia.
4 Corner
Holes
C Typ.
C Typ.
2 Slots
4 Slots
A
A
For Connector Size
34, 42, 50, 66, 75
104
A
B
C
.11 .120 .06R
.14 .150 .07R
For XAC 75
Configuration
For XAC 34, 42, 50, 66,
and 104 Configurations
Plug Shell
Style No. 1000
Shells are .040 in. thick.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 19
Rack & Panel
External Miniature Rectangular, Removable Contacts
XAC SERIES
ORDERING INFORMATION
Omit steps not required
XAC
9
P
M
1
A
0
00
■ Step 1
■ Step 7 ■ Step 8
■ Step 9
■ Step 2
■ Step 3
■ Step 4
■ Step 5
■ Step 6
Series:
XAC, XNAC
(See
bottom
chart)
Mounting Plate:
Pin or
Socket
Contacts:
P - Pin
S - Socket
Jackscrews Shell Type:
Polarization
Position:
A, B, C, D,
E, F or G.
Omit letter
when
polarization
is not
required.
Special Gaskets:
Omit letter when gaskets
are not required.
** G- Bulkhead gasket, style
#0000G. Use only
when mounting plate is
specified.
** F- Face gasket, style
#0000F. Use with
male insert only.
No. of
Contacts:
** 0 No shell
00- When no
mounting
plate is
(See
bottom
chart)
Numerical
contact
identification
on sizes 34,
50, and 104.
9, 14, 18, 20,
26, 34, 42,
50, 66, 75,
and 104
See note 1
below
** 1 Plug shell,
style 1*000.
required
** 2 Receptacle
shell, style
2*000.
*10- Mounting
plate, style
#0010.
Note: See section
XMRA/E RP/57.
*Mounting plates ** B- If both gasket #0000G
are not used with
“M”, “C” or “D”
jackscrews.
** 3 Plug shell,
monojack
type,
style 3*000.
and gasket #0000F
are desired.
** 4 Receptacle,
monojack type,
style 4*000.
** Check plant for availability
** on all gaskets.
** 7 Stainless Steel
Plug shell, style
7*000.
** 8 Stainless Steel
Receptacle shell,
style 8*000.
** Polarizing Position
** Request availability
** information
■ Step 4
■ Step 7
Guides
Formed Hoods:
**G- Cylindrical guide with single spring member.
Recommended for ground only.
0- No Hood.
3- Hood, top opening, style #0300, for use with Type “C”
or “D” jackscrews.
**K-
Cylindrical guide with four spring members.
May be used for electrical contact.
4- Hood, side opening, style #0400, for use with Type “C”
or “D” jackscrews.
**N-
Cylindrical guide without spring member.
Recommended for extra mechanical strength.
5- Hood, top opening, style #0500J, for use with “F”
style jackscrews.
Jackscrews and Jacksockets
*** M- Polarized short turnable jackscrew and
jacksocket. Cannot be used with hoods.
6- Hood, side opening, style #0600J, for use with “F”
style jackscrews.
*** C- Polarized long turnable jackscrew and
jacksocket for use with hoods.
Deep Drawn Hoods:
7- Hood, top opening, style #0700, for use with Type “C”
or “D” jackscrews.
8- Hood, side opening, style #0800, for use with Type “C”
or “D” jackscrews.
*** D- Polarized one-piece mono-jackscrew and
mono-jacksocket (no separate knob); to be
used with hoods on sizes: 34, 42, 50, 66, 75,
and 104.
9- Hood, top opening, style #0900, for use with
“F” jackscrews.
2- Hood, side opening, style #0200, for use with
“F” jackscrews.
***
***F- Polarized fixed jackscrew and jacksocket
usable with or without hood; (no knob
required).
** MW- Same as M but with knurled round knob with
internal hex.
** MU- Same as M but with knurled round knob with
screwdriver slot.
** MX- Same as M but with hex knob.
Note: Addition of “X” to code # indicates cable opening
larger than std. See hoods for cable opening size.
Example: XAC20PC1A300 X
** CW- Same as C but with knurled round knob with
internal hex.
** CU- Same as C but with knurled round knob with
screwdriver slot.
** CX- Same as C but with hex knob.
** CZ- Same as C but with prybar knob.
**
Request availability information
*** Material: Nickel Plated Brass standard
Note: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 20
相关型号:
©2020 ICPDF网 联系我们和版权申明