XMRA104P-D-3D600 [WINCHESTER]
Rack and Panel Connector, 104 Contact(s), Male, Solder Terminal, Plug;
| 型号： | XMRA104P-D-3D600 |
| 厂家： | 
Winchester Electronics Corporation |
| 描述： | Rack and Panel Connector, 104 Contact(s), Male, Solder Terminal, Plug |
| 文件： | 总10页 (文件大小：320K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
A typical Series “XMRE” Receptacle and Plug fully wired and potted.
The XMRE and XMRA Series connectors are
designed to provide a sturdy, space-saving,
lightweight electrical connection. Inserts are
housed in protective shells with screw lock
coupling plus wall and cable mounting
accessories available.
SPECIFICATIONS
Current Rating:XMRA - 13 amps
Dielectric:
Brown mineral filled diallyl
phthalate. Also available in
gray glass filled diallyl
phthalate, per MIL-M-14,
SDG-F.
XMRE - 7.5 amps
No. of
Contacts:
XMRA - 9, 14, 20, 34, 42, 50,
50-8, 66, 75, 104
XMRE - 9, 14, 18, 20, 26, 34,
42, 50, 75, 104
Pin Contacts: XMRA - .062 diameter, gold
plated brass
Polarization: A polarizing stud in the plug
shell and a mating slot in the
receptacle shell eliminates
misalignment. Jackscrews
and jacksockets or guide
pins and sockets are
XMRE - .040 diameter, gold
plated brass
alternative methods of
polarization.
Socket
Contacts:
Phosphor bronze plated gold.
Hoods:
Anodized Aluminum. May be
applied to both plug and
receptacles. Both top and
side opening hoods are
available.
Termination
Types:
XMRA - .070 dia. solder cup
will accept up to #16 AWG
stranded wire.
XMRE - .048 dia. solder cup
will accept up to #20 AWG
stranded wire.
Electrical Data: Both XMRE and XMRA meet
high potential performance
requirements of MIL-C-28748.
Military versions are QPL’d to
M28748/1 and M28748/2
(XMRA) and to M28748/5 and
M28748/6 (XMRE)
The minimum dielectric
withstanding voltage is one
minute electrification at 1000
VAC (sea level) for XMRA and
1200 VAC for XMRE Series.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 44
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
CONNECTOR ASSEMBLIES
CONNECTOR TERMS
Plug: The complete connector half which has
the plug shell as part of its assembly.
Socket Contacts: Female metal conductors,
tubular in shape, which receive the pin
contacts and retain them by spring tension.
Receptacle: The complete connector half
which has the receptacle shell as part of its
assembly.
Polarization: A means of controlling the
engagement of a plug and receptacle so that
correct mating of the contacts is achieved.
Shell: The metal housing in which a male or
female insert is assembled. A shell is either a Potting Form: A plastic mold used to retain
plug shell or a receptacle shell.
and shape the sealing compound during the
moisture-proofing, or potting operation.
Plug Shell: One which is designed to be
inserted into a receptacle shell.
Potting: A method of moisture-proofing the
back of a plug or receptacle and the soldered
wire connections by injecting a free flowing
sealing compound into a pre-shaped form and
allowing it to set. The result is a homoge-
neous mass, chemically bonded to the back
of the insert and around the soldered
connections.
Receptacle Shell: One which is designed to
receive and enclose the plug shell upon
engagement.
Male Insert: The molded insulator body
containing pin contacts.
Femal Insert: The molded insulator body
containing socket contacts.
Accessories: Those components such as
hoods, mounting plates and finger grips which
are attachable to a plug or receptacle to
facilitate mounting and/or handling of the
connector.
Pin Contacts: Male metal conductors that fit
into the socket contacts.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 45
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
OUTLINE
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
Con
.44
.09R
.075
Typ.
.56
.09R
.44
.075
Typ.
.38
.075
Typ.
.075
Typ.
1.563
1.250
1.313
1.250
.937
1.313
1.000
1.000
.06
.11
.06
.13R
.13R
.09R
.130 Typ.
.13R
.09R
.130 Typ.
.130 Typ.
.172 Typ.
9 Contacts
XMRE 9 or XMRA9
14 Contacts
XMRE 14 or XMRA 14
18 Contacts
XMRE 18
20 Contacts
XMRE 20 0r XMRA 20
.75
.88
.47
.75
.47
.75
.23
.75
.47
.23
.47
.23
.09R
.09R
.09R
.23
.56
.09R
.075
Typ.
.075
Typ.
.075
Typ.
.075
Typ.
.075
Typ.
.16
.16
1.625
1.312
2.000
1.688
2.000
2.313
2.000
2.594
2.719
1.688
.06
2.281
.13R
.130 Typ.
.16
Mounting
holes for
No. 4 machine
screws
.180 Typ.
Mounting holes for
No. 4 machine screws
.180 Typ.
Mounting
26 Contacts
XMRE 26
Mounting
holes for
.180 Typ.
holes for
No. 4 machine
screws
No. 4 machine
screws
.180 Typ.
42 Contacts
50 Contacts
34 Contacts XMRA 34
34 Contacts XMRE 34
XMRE 42 or XMRA 42
XMRE 50 or XMRA 50
1.234
1.125
.50
.25
1.125
.50
.25
1.109
.77
1.531
.88
.23
.31R
.075
Typ.
.150
Typ.
.44
.130
Typ.
.075
Typ.
.260
.16
.13
2.594
2.281
1.969
1.969
2.281
2.375
2.750
2.719
2.282
.16
.180 Typ.
.180 Typ.
Mounting
holes for
No. 4
Mounting
.180 Typ.
holes for No. 4
machine screws
.225
.16R
machine
screws
.180 Typ.
Mounting
holes for No. 4
machine screws
104 Contacts
XMRA 104
XMRE 104
58 Contacts
XMRA 50-8
66 Contacts
XMRA 66
75 Contacts
XMRE 75 or XMRA 75
Views are rear (wiring end) of female inserts (male inserts are mirror image). The spacing, arrangement, and
identification of contacts of the XMRE inserts are the same as found on the Series MRE Connectors for the
same number of contacts.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 46
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
JACKSCREWS & JACKSOCKETS
Jackscrew Locking Devices
Type C (long-turning jackscrews and
jacksockets) or Type D (monojacks) must be
specified if both jackscrews and hood are
required on the same connector half.
Monojacks eliminate the need for roll pins,
spacers and washers.
Polarized jackscrews offer the ease and
assurance of threaded positive coupling.
They are particularly desirable for the larger
connectors (XMRE 34 and larger) whenever
they are to be used in locations that make it
difficult to apply enough direct pull to
separate the two halves of the connector.
OUTLINE
Mono-
Jackscrew
Shell
A
B
.73
Jacksocket
4-40 UNC
Except
size 104
which is 6-
32
.052 Dia.
safety wire hole
Self locking
pin
Hood
Mono-
Jacksocket
6-32 UNC Except 104
Which is 8-32 UNC
Jackscrew
AND
Code designation: C-0300, C-0400
OR
Mating connector half with Hood and
turnable Monojacks
OR
Connector with fixed Jackscrews
Code designation: F
Mating connector half with turnable
Jackscrews-with-Knobs
Code designation: M
Mating connector half with Hood and
turnable Long Jackscrews-with-
Knobs
Code designation: D-0300, D-0400
Drawings show extension of knobs beyond shell (left) and beyond hood. Refer to details
of shells and hoods for the other dimensions which vary according to connector size.
DIMENSIONS
Dimension A
Dimension B
SERIES CODE
0300
9
–
14 18 20 26 34 42 50 50-8 66 75 104
CODE 34 42 50 66 75 104
0300
0400
0700
0800
.59 .55 .55
.59 .55 .55
–
–
.38
.38
.53
.53
–
–
–
.38
.38
–
–
–
.77 .58 .53 .53
–
–
–
–
–
–
–
–
.52
.52
.52
.52
–
–
–
–
0300X .53 .53 .78 .53 .55 .58 .53 .53
0400 .55 .55 .55 .55 .55 .58 .53 .53
XMRE
XMRA
–
–
–
–
–
–
0400X
–
–
–
.55 .55 .58 .53 .53
–
0700
0800
–
–
–
–
–
–
–
–
–
–
.58
.58
–
–
–
–
.64 .64
.64 .64
–
–
.52
.52
Part
Code
Letter
Wt. Oz.
See Notes
1 & 2
Material and
Finish
Guide Socket
Code Letter
Actual Size Photo
Jackscrews
Jacksockets
stainless steel
with passivating dip
Turntable
M
0.30
0.45
0.15
Jackscrews
Jacksockets
Long
Turntable
stainless steel
with passivating dip
G
K
N
C
F
G Type
For General Use
Jackscrews
Jacksockets
Fixed
nickel-plated brass
al. anodized
Knobs (except
Monojacks
Monojackscrews
Monojacksockets
Turning
Turning
K Type For
High Electrical Conductivity
Standard Guide Pin
mates with all types
D
nickel-plated brass
Note 1: Weights are given for pairs, i.e., for a jackscrew and a
jacksocket, etc., so that the weight figure may be added once to the
weights of other accessories when computing the total weight of a plug
or receptacle.
Note 2: Weights of turnable jackscrews and turnable jacksockets include
knobs and roll pins; weights of fixed hardware include nuts.
N Type For
Extra Mechanical Strength
MATERIALS
"G" Socket:
FINISH
Gold over Nickel
Phosphor
bronze.
"K" Socket:
"N" Socket:
Guide Pin:
Beryllium copper.
Brass.
Brass
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 47
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
OUTLINE
JACKSCREW & JACKSOCKETS
.50
.22
Dia.
.19
.22
.25 Hex.
.078 Int. Hex
A
A
A
A
CW
CU
CX
CZ
.19
.22 Dia.
.078 Int. Hex
.97
.33
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
MU
.25
Hex
MW
.73
MX
DIMENSIONS
All jackscrews and sockets are stainless
steel, passivated, except F & D which
are nickel-plated brass.
Jackscrew Locking For Series XMRE, XMRA
Size 0300 0400 0300X 0400X 0700 0800 Size 0300 0400 0300X 0400X 0700 0800
Dimension A - Type CW
Dimension A - Type CU
All knobs are aluminum, anodized
except MW and CW which are
stainless steel, passivated.
9
14
18
20
26
34
42
50
50-8
66
75
–
–
–
.36
.36
.36
.36
.36
.39
.34
.34
–
.34
.34
.34
34
.36
.39
.34
.34
–
.36
.36
.36
.36
.36
.39
.34
.34
–
–
–
–
–
–
.47
–
–
.47
.47
–
–
–
–
–
–
.47
–
–
.47
.47
–
9
14
18
20
26
34
42
50
50-8
66
75
–
–
–
.61
.61
.61
.61
.61
.64
.59
.59
–
.59
.59
.59
.59
.61
.64
.59
.59
–
.61
.61
.61
.61
.61
.64
.59
.59
–
–
–
–
–
–
.72
–
–
.72
.72
–
–
–
–
–
–
.72
–
–
.72
.72
–
–
–
.36
.39
.34
.34
–
.61
.64
.59
.59
–
–
.33
–
.33
–
.33
–
.33
–
.58
–
.58
–
.58
–
.58
Size 0300 0400 0300X 0400X 0700 0800 Size 0300 0400 0300X 0400X 0700 0800
Dimension A - Type CX
Dimension A - Type CZ
9
14
18
20
26
34
42
50
50-8
66
75
–
–
–
.48
.48
.48
.48
.48
.52
.47
.47
–
.47
.47
.72
.47
.48
.52
.47
.47
–
.48
.48
.48
.48
.48
.52
.47
.47
–
–
–
–
–
–
.61
–
–
.61
.61
–
–
–
–
–
–
.61
–
–
.61
.61
–
9
14
18
20
26
34
42
50
50-8
66
75
–
–
–
.61
.61
.61
.61
.61
.64
.59
.59
–
.59
.59
.84
.59
.61
.64
.59
.59
–
.61
.61
.61
.61
.61
.64
.59
.59
–
–
–
–
–
–
.72
–
–
.72
.72
–
–
–
–
–
–
.72
–
–
.72
.72
–
–
–
.77
.52
.47
.47
–
.92
.64
.59
.59
–
–
.45
–
.45
–
.45
–
.45
–
.58
–
.58
–
.58
–
.58
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 48
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
DIMENSIONS
HOODS - DRAWN ALUMINUM
Dimensions are for reference only and are subject to change. Outline drawings on request.
.191 Dia. 2 Holes (.228 Dia. For
XMRA 104-0800 Only)
.1935 Dia. 2 Holes (.228 Dia. For
D
XMRA 104-0700 Only)
.08
D
C
Style
“Y”
H
E
B
G
A
(cable opening)
C
E
(cable
opening)
Style
“Z”
G
B
.08
.08
A
Top Cable Opening
Hood
Side Cable Opening
Hood
Dimensions
Dimensions
Part Number
XMRA 34-0800
A
B
C
D
E
H
G
Part Number
A
B
C
D
E
G
For use with
Type C
Jacksockets &
Jackscrews
For use with
Type C
2.09
.84
1.16 2.58 .64x.75 1.06 1.688
XMRA 50-8-0800 2.38 1.22 1.16 2.91
XMRA 34-0700
XMRA 50-8-0700
XMRA 66-0700
XMRA 104-0700
XMRA 34-0700D
2.09
.84
1.17 1.59 .66x.75 1.688
1.17 1.69 1.03D 1.969
1.17 1.69 1.03D 1.969
2.23 2.75 1.19D 2.375
.84 D 1.34 1.969
.84D 1.34 1.969
2.38 1.22
2.38 1.22
2.84 1.63
Jacksockets &
Jackscrews
XMRA 66-0800
XMRA 104-0800
2.38 1.22 1.16 2.91
2.84 1.63
2.22 3.38 1.19D 1.63 2.375
For use with
Type D
Jacksockets &
For use with
Type D
2.09
.84
1.17 1.59 .66x.75 1.688
XMRA 34-0800D
2.09 .84
1.17 2.58 .64x.75 1.688 1.06
XMRA 50-8-0800D 2.38 1.22 1.17 2.91
2.38 1.22 1.17 2.91
XMRA 104-0800D 2.84 1.63 2.23 3.38 1.19D 2.375 1.63
XMRA 50-8-0700D 2.38 1.22 1.17 1.69 1.03D 1.969
XMRA 66-0700D
.84D 1.969 1.34
.84D 1.969 1.34
Jacksockets &
Jackscrews
2.38 1.22
1.17 1.69 1.03D 1.969
XMRA 66-0800D
Jackscrews
XMRA 104-0700D 2.84 1.63 2.23 2.75 1.19D 2.375
For use with XMRA 34-0900
2.09
.84
1.17 1.59 .66x.75
–
–
–
–
For use with
G, K, or N, Type
Guides or Type
F Jackscrews
XMRA 34-0200
XMRA 50-8-0200 2.38 1.22 1.16 2.91
XMRA 66-0200
XMRA 104-0200
2.09
.84
1.16 2.58 .64X.75 1.06
–
–
–
–
G, K, or N, Type
Guides or Type
F Jackscrews
XMRA 50-8-0900
XMRA 66-0900
XMRA 104-0900
2.38 1.22 1.17 1.69 1.03D
2.38 1.22 1.17 1.69 1.03D
2.84 1.63 2.23 2.75 1.19D
.84D
.84D
1.34
1.34
2.38 1.22 1.16 2.91
2.84 1.63 2.22 3.38 1.19D 1.63
DIMENSIONS
HOODS - FORMED ALUMINUM
Top Cable Opening
For use with
Type C
Jacksockets &
For use with
G, K, or N, Type
Cable
Opening
Dimensions
E & F (cable opening)
Guides
For use
*
Jackscrews
with
0300X & 0500X
Style Cable Clamp
Wt.
Dia. Dia. Oz.
E
F
Hood Part No.
(If ordered separately)
Monojacks
A
B
C
D
D
F
XMRE 9-0500
1
1
1.31 1.31
1.30 1.31
.44
.44
.5
.31
.59
.44D
.59
.44D
.63
.44D
.66
–
.31
–
.38
–
.44
–
.38
.38
.44
–
.56
–
.56
–
.28
.88
.88
0.3
0.3
0.4
0.3
0.4
0.6
0.7
0.8
1.0
A
XMRE 9-0300X
XMRE 14-0300X
XMRE 18-0300X
XMRE 9-0500X
XMRE 14-0500
XMRE 14-0500X
XMRE 18-0500
XMRE 18-0500X
XMRE 20-0500
XMRE 20-0500X
XMRE 26-0500
XMRE 26-0500X
XMRE 34-0500
XMRE 34-0500X
XMRE 42-0500
XMRE 42-0500X
XMRE 50-0500
XMRE 50-0500X
XMRE 75-0500
XMRE 75-0500X
.75 1.19 1.25
.75 1.05 1.25
.75 1.19 1.31
.75 1.25 1.31
.75 1.19 1.56
.75 1.05 1.56
1.28 1.72 1.63
1.28 1.78 1.63
.5
.63
.63
.5
E
C
XMRE 20-0300X
XMRE 26-0300
XMRE 26-0300X
XMRE 34-0300
XMRE 34-0300X
XMRE 42-0300
XMRE 42-0300X
XMRE 50-0300
XMRE 50-0300X
XMRE 75-0300
XMRE 75-0300X
.5
.64
.64
.83
.83
.83
.83
.83
.83
.59
.78
XMRE 34-0300D
XMRE 34-0300XD
XMRE 42-0300D
XMRE 42-0300XD
XMRE 50-0300D
XMRE 50-0300XD
XMRE 75-0300D
XMRE 75-0300XD
1.25 1.67
2
.66D
1.06
.63D
1.06
.63D
1.06
.63
1.25 1.75 2.00
1.30 1.73 2.31
1.30 1.80 2.31
1.30 1.80 2.59
1.30 1.80 2.59
B
Drilled for long jackscrews
and jacksockets (type C) in
Hood style 0300 only
1.31 1.75 2.59 1.19
1.31 1.86 2.59 1.19
1
For use with
Type C
Jacksockets &
Jackscrews
For use with
G, K, or N, Type
Side Cable Opening
Cable
Opening
Dimensions
Guides
For use
with
Monojacks
*
F
D
E
F
Wt.
Hood Part No.
(If ordered separately)
E
A
B
C
D
Dia. Dia. Oz.
C
B
XMRE 9-0400
XMRE 9-0600
1.28 1.31 1.63
1.28 1.31 1.61
1.28 1.25 1.69
1.28 1.25 1.55
1.28 1.31 1.75
1.28 1.31 1.81
.44
.44
.5
.31D
.59
.38D
.59
.44D
.69
.38D
.66
.59
.78
.66
.81
.63
.84
.63
1.06
.63
1
–
.31
–
.38
–
.44
–
.38
.38
.44
–
.56
.5
.56
.5
.56
.88
.88
E & F (cable opening)
0.3
0.3
0.3
0.3
0.4
0.6
0.7
0.8
1.0
XMRE 9-0400X
XMRE 14-0400
XMRE 14-0400X
XMRE 18-0400
XMRE 18-0400X
XMRE 20-0400
XMRE 20-0400X
XMRE 26-0400
XMRE 26-0400X
XMRE 34-0400
XMRE 34-0400X
XMRE 42-0400
XMRE 42-0400X
XMRE 50-0400
XMRE 50-0400X
XMRE 75-0400
XMRE 75-0400X
XMRE 9-0600X
XMRE 14-0600
XMRE 14-0600X
XMRE 18-0600
XMRE 18-0600X
XMRE 20-0600
XMRE 20-0600X
XMRE 26-0600
XMRE 26-0600X
XMRE 34-0600
XMRE 34-0600X
XMRE 42-0600
XMRE 42-0600X
XMRE 50-0600
XMRE 50-0600X
XMRE 75-0600
XMRE 75-0600X
.5
.63
.63
.5
1.28 1.56
2
1.28 1.56 1.86
1.28 1.63 2.06
1.28 1.63 2.13
.5
A
0400X & 0600X
Style Cable Clamp
.64
.64
.83
.83
.83
.83
.83
.83
XMRE 34-0400D
XMRE 34-0400XD
XMRE 42-0400D
XMRE 42-0400XD
XMRE 50-0400D
XMRE 50-0400XD
XMRE 75-0400D
XMRE 75-0400XD
1.25
1.25
2
2
2.42
2.5
1.30 2.31 2.73
1.30 2.31 2.81
1.30 2.59 3.02
1.30 2.59 3.09
1.31 2.59 3.02 1.19
1.31 2.59 3.14 1.19
Add “J” to hood P/N when used with “F” jackscrews.
*
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 49
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
OUTLINE
SHELLS - RECEPTACLE
Dimensions are for reference only and are subject to change. Outline drawings on request.
B
C
B
C
.03R
.06R
.20R
.421R
B
C
B
C
.384R
.06R
.120 Dia.
Mtg Hole
Style 9
.14R
F
B
C
.28
E D
E D
A
E
B
F
C
G
D
E D
E D
A
E D
.06R
.06R
.117
.156 Typ
.312 Typ
.06R
.06R
.06R
.120 Dia.
6 Holes
.120 Dia.
4 Holes
.114
.150 Dia.
6 Holes
G
G
Polarizing Slot
For All Conf.
.14R
.114
.120 Dia.
2 Holes
.383
.140 Dia.
4 Holes
.500
G
.875
.766
For 9 to 26
For 34, 42, and
50
For 66 and 50-8
For 75
For 104
DIMENSIONS
SHELLS - RECEPTACLE
Shell Part No.
(if ordered
separately)
Important Note When Ordering
Plug and Receptacle Shells
Dimensions
Wt.
A
B
C
D
E
F
G
–
Oz.
0.15
0.16
The shell part numbers given in table
show an asterisk (*) where the code
letter for the desired polarizing
position belongs - example: XMRE9-
2*000 becomes XMRE9-2B000 when
polarization in position “B” is desired.
Specify the same position on the
mating shell.
XMRE 9-2*000
1.45 .52
.38 1.000 .88
.45 .937 .81
.58 1.000 .88
.66
.66
.66
XMRE 14-2*000 1.39 .58
–
XMRE 18-2*000 1.45 .70
XMRE 20-2*000 1.70 .58
XMRE 26-2*000 1.77 .70
XMRE 34-2*000
XMRE 34-4*000 2.14 .89
XMRE 42-2*000
XMRE 42-4*000 2.45 .89
XMRE 50-2*000
XMRE 50-4*000 2.86 1.02 .75 2.282 2.03 .66 .234 0.30
–
–
–
0.17
0.19
0.23
.45 1.250 1.13 .66
.58 1.312 1.19 .66
.75 1.687 1.44 .66 .234 0.25
.75 2.000 1.75 .66 .234 0.28
For non-polarized shells, merely omit
this position, e.g. XMRE9-2000.
XMRA 66-2*000
XMRA 66-4*000
XMRA 50-8-2*000
XMRA 50-8-4*000 2.42 1.27 1.13 1.969 1.72 .66 .250 0.28
XMRE 75-2*000
TYPICAL SHELLS FOR
MONOJACKS
XMRE 75-4*000 2.86 1.38 1.11 2.282 2.03 .66
–
0.32
Shells are aluminum, anodized for
protection against corrosion. Either
shell style - plug or receptacle - may be
used to house the female insert, thus
allowing the “live” socket contacts to be
cable or panel mounted, as desired.
Shells also provide a means by which
connector polarization is accomplished
- the receptacle shell is slotted for
engaging a polarizing pin on the plug
shell. Any of seven positions (A, B, C,
D, E, F, or G) may be specified for
polarization; non-polarized shells have
the slot and pin omitted.
XMRA 104-2*000
XMRA 104-4*000 2.91 1.69 1.48 2.375 2.13 .66 .437 0.30
B Dia.
4 Corner
Holes
B Dia.
4 Corner
Holes
C Type
C Type
2 Slots
4 Slots
A
A
Stainless steel shells available for 66
and 104 sizes. Dimensions vary from
those shown for aluminum shells,
Check Sales for availability and
dimensions on all sizes.
For 34, 42, 50, 50-8, 66
and 104 Configuration
For 75
Configuration
Receptacle Shell
Style Number 2000
For Connector Size
34, 42, 50, 50-8, 66, 75 .11 .120 .06R
104 .14 .150 .07R
A
B
C
Shells are .040 in. thick.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 50
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
OUTLINE
SHELLS - PLUG
Dimensions are for reference only and are subject to change. Outline drawings on request.
B
C
B
C
.140 Dia. 4 Holes
.06R .03R
B
C
B
C
.06R
.120 Dia.
.14R
Mtg. Hole
Style 9
F
B
C
.508
D
E
D E
A
E
B
F
C
G
D
D
E
D
E
A
D
E
.06R
.06R
.06R
.06R
.156 Typ.
.312 Typ.
.06R
Polarizing Pin
.150 Dia.
6 Holes
.120 Dia.
4 Holes
.120 Dia.
6 Holes
.120 Dia.
6 Holes
.120 Dia.
2 Holes
G
G
.500
G
.468
.117
.383
.766
.421R
.20R
.372R
.14R
.875
For 104
For 75
For 66 and 50-8
For 34, 42, and 50
For 9 to 26
For All Config.
DIMENSIONS
Shell Part No.
(if ordered
separately)
Dimensions
Wt.
A
B
C
D
E
F
G
–
–
–
–
–
Oz.
0.14
0.15
0.16
0.18
0.22
XMRE 9-1*000
1.44 .5
.38 1.000 .88 .63
XMRE 14-1*000 1.38 .56 .45 .937 .81 .63
XMRE 18-1*000 1.44 .69 .58 1.000 .88 .63
XMRE 20-1*000 1.69 .56 .45 1.250 1.13 .63
XMRE 26-1*000 1.75 .69 .58 1.312 1.19 .63
XMRE 34-1*000
XMRE 34-3*000 2.13 .88 .75 1.687 1.44 .66 .234 0.24
XMRE 42-1*000
XMRE 42-3*000 2.44 .88 .75 2.000 1.75 .66 .234 0.26
XMRE 50-1*000
XMRE 50-3*000 2.84
1
.75 2.282 2.03 .66 .234 0.28
XMRA 66-1*000
XMRA 66-3*000 2.41 1.25 1.13 1.969 1.72 .66 .250 0.28
XMRA 50-8-1*000
XMRA 50-8-3*000
XMRE 75-1*000
XMRE 75-3*000 2.84 1.36 1.11 2.282 2.03 .66
–
0.30
XMRA 104-1*000
XMRA 104-3*000 2.88 1.66 1.48 2.375 2.13 .66 .437 0.30
B Dia.
B Dia.
4 Corner
Holes
4 Corner
C Type
C Type
Holes
Typical Shells
For Monojacks
For Connector Size
34, 42, 50, 50-8, 66, 75 .11 .120 .06R
A
B
C
4 Slots
A
2 Slots
A
104 .14 .150 .07R
For 34, 42, 50, 50-8, 66
and 104 Configuration
For 75
Configuration
Plug Shell
Style Number 1000
Shells are .040 in. thick.
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 51
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
OUTLINE
MOUNTING PLATES
Dimensions are for reference only and are subject to change. Outline drawings on request.
A
Mounting Plates for External Miniature Rectangular Connectors,
Potting Forms
B
.16R
Mounting Plates enable attachment of a connector to a wall, bulkhead, or other supporting
surface. The plate is assembled to the back of a plug or receptacle by employing the same
hardware and/or guides used to retain the insert in the shell; No. 4 machine screws are
then used to mount the complete assembly against the required surface.
.06R
D
E
F
.125 Dia.
4 Holes
Mounting plates are aluminum, anodized to resist corrosion.
C
.040 Stock
G
Mounting plate plan view for 9 to 26 contacts
A
B
C
.125 Dia. (66 & 50-8)
.150 Dia. (104)
10 Holes
B
C
.125 Dia.
12 Holes
.125 Dia.
10 Holes
.06R
H
D
.383
.117
.06R
.23
E
F
D
F
E
.16R
H Dimension
Panel Cut Out
.040 Stock
50-8 = .250
66 = .250
Panel Cut Out
.050 Stock
G
A
G
104 = .437
Left half shows holes for 34, 42, 50 contacts; right half for 75 contacts
only. Each plate is symmetrical about the indicated center line.
Mounting Plate Plan View for 50-8, 66 & 104 Contacts
Note: .19R for 104 and .16R for 50-8 & 66 for panel cutout.
DIMENSIONS
Mounting Plate Part
Panel
No. (If Ordered
Separately)
Cutout
Dimensions
C
Wt.
A
B
D
E
.95
F
G
Oz.
0.09
0.10
0.11
0.12
0.14
0.15
0.16
0.18
0.19
0.18
XMRE 9-0010
XMRE 14-0010
XMRE 18-0010
XMRE 20-0010
XMRE 26-0010
XMRE 34-0010
XMRE 42-0010
XMRE 50-0010
XMRE 75-0010
2.02 1.000
1.95 .937
2.02 1.000
.88
.81
.88
.41
.64
.70
.83
.70
.83
1.58
1.52
1.58
1.83
1.89
2.27
2.58
2.98
2.98
2.55
.47 1.02
.59 1.14
.47 1.02
.59 1.14
2.27 1.250 1.13
2.33 1.312 1.19
2.70 1.687 1.44
3.02 2.000 1.75
3.42 2.281 2.03
3.42 2.281 2.03
.75 1.33 1.02
.75 1.33 1.02
.75 1.45 1.14
1.11 1.80 1.48
1.13 1.69 1.39
XMRA 50-8-0010 2.98 1.969 1.72
XMRA 66-0010
XMRA 104-0010
OUTLINE
POTTING FORMS
3.5 2.375 2.13
1.48 2.0
1.81
3.03
0.19
Potting Forms for External Miniature
Rectangular Connectors
A
A
.50
Nylon Potting Forms: Each form matches the
back opening contour of its appropriate shell.
Stays easily in place during the potting
operation. Of negligible weight, the form
need not be removed from the connector after
potting. XMRE and XMRA connector-halves
should always be engaged during the potting
operation to preserve the contact alignment.
B
B
.025 Typ. Wall Thick
Potting form plan view
for 9 to 26 contacts
Potting form plan view for 34, 42,
50, 50-8, 66, and 104 contacts
DIMENSIONS
*Stepped
construction not
shown or
Potting Form Part No.
(If Ordered Separately)
Potting Form Part No.
(If Ordered Separately)
Dimensions
Dimensions
A
B
A
B
dimensioned.
Cut-outs to clear
XMRA barriers not
shown.
XMRE 9-0100
XMRE 14-0100
XMRE 18-0100
XMRE 20-0100
XMRE 26-0100
XMRE 34-0100
XMRE 42-0100
XMRE 50-0100
XMRE 75-0100
.38
.45
.56
.44
.56
.75
.75
.75
1.11
.86
.81
.86
1.11
1.17
1.39
1.69
1.98
1.98
XMRA 9-0100
XMRA 14-0100
* XMRA 20-0100
XMRA 34-0100
XMRA 42-0100
XMRA 50-0100
XMRA 50-8-0100
XMRA 66-0100
XMRA 75-0100
XMRA 104-0100
.38
.45
.44
.75
.75
.86
1.11
1.11
1.39
1.69
2.03
1.72
1.72
2.03
2.08
.75
1.13
1.13
1.11
1.48
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 52
Rack & Panel
External Miniature Rectangular / #16 Contacts / .062" Dia.
XMRA & XMRE Series
■
13 Amps
#20 Contacts / .040" Dia. / 7.5 Amps
ORDERING INFORMATION
Omit steps not required
A
A
S
S
-F
-F
-2
-2
1
1
10
10
XMRE 34
XMRA 34
■ Step 1
■ Step 7 ■ Step 8
■ Step 9
■ Step 5
■ Step 6
■ Step 2
■ Step 3
■ Step 4
Insert Code
No. of
Contacts:
(See
bottom
chart)
Mounting Plate
or Finger Grips:
00- When no
mounting
plate is
Shell Type:
0 No shell.
1 Plug shell, style
1*000.
2 Receptacle shell,
style 2*000.
Polarization
Position:
A, B, C, D, E,
F or G.
Omit letter
when
polarization is
not required.
Special Gaskets:
Omit letter when gaskets
are not required.
** G- Bulkhead gasket, style
#0000G. Use only
when mounting plate is
specified.
** F- Face gasket, style
#0000F. Use with
male insert only.
** B- If both gasket #0000G
and gasket #0000F
are desired.
** Check plant for availability
** on all gaskets.
Pin or
Socket
Contacts:
P - Pin
S - Socket
Type of
Contact:
Blank =
Standard
Solder Cup
Straight
Dip Solder
.030" dia.=
XMRA
.025" dia.=
XMRE
D3 = .094"
D4 = .125"
D5 = .156"
For additional
lengths in 1/32"
increments,
contact
Winchester’s
Sales
Guides
Jackscrews
and
Jacksockets
(See bottom
chart)
XMRA 9,
14, 20, 34,
42, 50, 50-8,
66, 75, 104
XMRE 9,
14, 18, 20,
26, 34, 42,
50, 75, 104
By adding “ML”
to the series
code, connector
is supplied with
diallyl phthalate
type SDG-F
required
*10- Mounting
plate, style
#0010.
*Mounting plates
are not used with
“M”, “C”, “D”, “J”,
or “L” jackscrews.
3 Plug shell,
monojack type,
style 3*000.
4 Receptacle,
monojack type,
style 4*000.
** 7 Stainless Steel
Plug shell, style
7*000 (66 & 104
only)
and mil plated
contacts.
** 8 Stainless Steel
Receptacle shell,
style 8*000 (66 &
104 only)
Example:
XMREML
XMRAML
Department.
*
Polarizing Position
** Request availablity
information.
■ Step 7
■ Step 4
Guides
Potting Form or Hoods:
G- Cylindrical guide with single spring member.
Recommended for ground only.
0- When no potting form or hood is required.
1- Potting form style #0100. Cannot be used with hood.
Request availability information.
Cannot be used
K- Cylindrical guide with four spring members.
May be used for electrical contact.
N- Cylindrical guide without spring member.
Recommended for extra mechanical strength.
Formed Hoods:
3- Hood, top opening, style #0300, for use with Type “C”
or “D” jackscrews.
Jackscrews and Jacksockets
***M- Polarized short turnable jackscrew and
jacksocket. Cannot be used with hoods.
4- Hood, side opening, style #0400, for use with Type “C”
or “D” jackscrews.
***C- Polarized long turnable jackscrew and
jacksocket for use with hoods.
5- Hood, top opening, style #0500, for use with “G”, “K”,
or “N” type guides only and “F” style jackscrews.
***D- Polarized turnable jackscrew and jacksocket 6- Hood, side opening, style #0600, for use with “G”, “K”,
for use with hoods for sizes 34 thru 104
excluding 41.
or “N” type guides only and “F” style jackscrews.
Deep Drawn Hoods:
7- Hood, top opening, style #0700, for use with Type “C”
or “D” jackscrews.
***F- Polarized fixed jackscrew and jacksocket.
***J- Non-polarized short turnable jackscrews.
Cannot be used with hoods.
***L- Non-polarized long turnable jackscrews.
***R- Non-polarized fixed jacksocket.
***FZ- Same as F but with 6-32 mtg thd (std on 104).
***MW-Same as M but with knurled round knob with
internal hex (not avail. 104).
***MU- Same as M but with knurled round knob with
screwdriver slot (not avail. 104).
***MX- Same as M but with hex knob (not avail 104).
***CW- Same as C but with knurled round knob with
internal hex (not avail. 104).
***CU- Same as C but with knurled round knob with
screwdriver slot (not avail. 104).
8- Hood, side opening, style #0800, for use with Type “C”
or “D” jackscrews.
9- Hood, top opening, style #0900, for use with “G”, “K”,
and “N” type guides or “F” jackscrews.
2- Hood, side opening, style #0200, for use with “G”, “K”,
or “N” type guides or “F” jackscrews.
Note: Addition of “X” to end of code # indicates cable
opening larger than std. See hoods for cable opening
size.
Example: XMRE34PD3A300X
***CX- Same as C but with hex knob (not avail. 104).
***CZ- Same as C but with prybar knob
(not avail. 104).
***
Request availablity information.
Material: Nickel-plated brass - standard
***
Winc he ste r/ Re tc o nn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP / 53
相关型号：
XMRA104P-D-4A000
Rack and Panel Connector, 104 Contact(s), Male, Solder Terminal, Receptacle
WINCHESTER
XMRA104P-D-4A210
Rack and Panel Connector, 104 Contact(s), Male, Solder Terminal, Receptacle
WINCHESTER
XMRA104P-D-4A410
Rack and Panel Connector, 104 Contact(s), Male, Solder Terminal, Receptacle
WINCHESTER
XMRA104P-D-4B500
Rack and Panel Connector, 104 Contact(s), Male, Solder Terminal, Receptacle
WINCHESTER
©2020 ICPDF网 联系我们和版权申明