CA20P-5R [XPPOWER]
Analog Circuit,;
| 型号： | CA20P-5R |
| 厂家： | 
XP POWER LIMITED |
| 描述： | Analog Circuit, |
| 文件： | 总8页 (文件大小：3437K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CA SERIES
PRECISION REGULATED, LOW RIPPLE HIGH VOLTAGE DC TO DC CONVERTERS
0 to +/-200V through 0 to +/-2000VDC @ 1 Watt
PRODUCT SELECTION TABLE
MAXIMUM
OUTPUT
OUTPUT
MODEL
VOLTAGE
CURRENT 1
*
(POSITIVE OR NEGATIVE)
CA02
CA05
CA10
CA12
CA20
0 to 200V
0 to 500V
0 to 5 mA
0 to 2 mA
0 to 1mA
PRODUCTDESCRIPTION
0 to 1,000V
0 to 1,250V
0 to 2,000V
0 to 0.8 mA
0 to 0.5 mA
Precision regulated, very low noise, high performance high voltage
power supplies are fully programmable (0 to 100%) and feature high
voltage monitor readback, on-board precision reference, wide input
voltage range and protection against arcs and short circuits all in a
miniature, shielded case.
Complete List of Models on page 2
FEATURES
Programming Voltage vs Output Voltage
100
90
80
70
60
50
40
30
20
10
0
• Very Low Ripple, as low as 5PPM!
• Precision Regulated
• Miniature Shielded Case, 1 cubic inch
• 0 to 100% Programmable output
• Voltage Monitor/ Readback
• High Stability, typically<25ppm/°C
• Wide Input Voltage Range
• Arc, Short Circuit Protected
12 Vin; indefinite
5 Vin; short duration, up to 1 minute
• Very Low EMI/RFI
• Precision On board Reference
0
20
40
60
80
100
• External Voltage or Potentiometer Programming
• Accessible Calibration Adjustment
Programming Voltage (0 to 100%)
• Sealed To Withstand Immersion Cleaning Processes
• Designed to meet the requirements of UL1950
• Proven Reliability, MTBF: >2.10 million hrs per Bellcore TR-332
• UL94-V0 Compliant Epoxy
APPLICATIONS
Photomultiplier Tubes
Avalanche Photodiodes
Solid State Detectors
Electrophoresis
OPTIONS
• Available with a 5VDC input voltage
EO Lenses
• Extended Operating Temperature: -55°C to +70°C
• Storage Temperature of Extended Temperature option: -55°C to +95°C
• Low Out-gassing Epoxy (NASA approved per ASTM E-595-93)
• RoHS versions available (R suffix)
Piezo Devices
Capacitor Charging
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
PAGE 1 OF 8
4709BO
CA SERIES
2
*
ELECTRICAL SPECIFICATIONS CA02 - CA20 (200V to 2000V)
REGULATION
OUTPUT
VOLTAGE
MAXIMUM
OUTPUT
RIPPLE
P-P
MODEL
FREQUENCY 3
*
LOAD
0 TO 100% 3
LINE
11.5 TO 15.5V 3
CURRENT*1
FULL-LOAD*3
*
*
12 VDC INPUT MODELS
0 to +200V
CA02P
0 to 5 mA
0 to 5 mA
0 to 2 mA
0 to 2 mA
0 to 1 mA
0 to 1mA
<0.01 %
<0.01 %
<0.05 %
<0.05%
<0.01 %
<0.01%
80 - 180 kHz
80 - 230 kHz
200 - 400 kHz
100 - 250 kHz
80 - 250 kHz
100 - 250 kHz
80 - 250 kHz
80 - 250 kHz
80 - 250 kHz
100 - 250 kHz
0 to -200V
CA02N
CA05P
CA05N
CA10P
CA10N
CA12P
CA12N
CA20P
CA20N
0 to +500V
0 to -500V
<0.01 %
<0.01 %
<0.01 %
<0.005 %
<0.005 %
<0.005 %
<0.005 %
<0.01 %
<0.01 %
<0.01%
<0.01 %
<0.01 %
<0.001 %
<0.001 %
<0.001 %
<0.001 %
<0.01 %
<0.01 %
0 to +1,000V
0 to -1,000V
0 to +1,250V
0 to -1,250V
0 to +2,000V
0 to -2,000V
<0.001 %
<0.001 %
<0.0005 %
<0.0005 %
<0.001 %
<0.001 %
0 to 0.8 mA
0 to 0.8 mA
0 to 0.5 mA
0 to 0.5 mA
5 VDC INPUT MODELS
0 to +200V
CA02P-5
0 to 5 mA
0 to 5 mA
0 to 2 mA
0 to 2 mA
0 to 1 mA
0 to 1 mA
0 to 0.8 mA
0 to 0.8 mA
0 to 0.5 mA
0 to 0.5 mA
<0.01 %
<0.01 %
<0.01 %
<0.005 %
<0.003 %
<0.005 %
<0.005 %
<0.005 %
<0.005 %
<0.005 %
<0.005 %
<0.001 %
<0.01 %
<0.003 %
<0.002 %
<0.002 %
<0.001 %
<0.001 %
<0.001 %
<0.001 %
<0.003 %
<0.001 %
100 - 250 kHz
100 - 250 kHz
100 - 250 kHz
87 - 350 kHz
100 - 250 kHz
100 - 250 kHz
150 - 300 kHz
150 - 300 kHz
45 - 250 kHz
100 - 250 kHz
0 to -200V
CA02N-5
CA05P-5
CA05N-5
CA10P-5
CA10N-5
CA12P-5
CA12N-5
CA20P-5
CA20N-5
0 to +500V
0 to -500V
<0.005 %
<0.005 %
<0.001 %
<0.001 %
<0.001 %
<0.001 %
<0.001 %
<0.001 %
0 to +1,000V
0 to -1,000V
0 to +1,250V
0 to -1,250V
0 to +2,000V
0 to -2,000V
INPUT CURRENT
CA02-CA12
CA20
VIN
NO-LOAD
FULL-LOAD
NO-LOAD
<155 mA
<100 mA
FULL-LOAD
<550 mA
<220 mA
5 VDC
12 VDC
<
65mA
<420mA
<80 mA
<220 mA
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
PAGE 2 OF 8
4709BO
CA SERIES
ELECTRICAL SPECIFICATIONS*2 CA02 - CA20 (200V to 2000V)
PARAMETER
VALUE
INPUT MODELS: +11.5 TO +15.5v (STANDARD)
INPUT VOLTAGE
5V INPUT MODELS: +4.75 TO +5.25V
STANDBY POWER
<25mW*3
INPUT CAPACITANCE
440uF
12V INPUT MODELS: 0 TO +5V, <150uA
PROGRAMMING VOLTAGE
5V INPUT MODELS: 0 TO +2.048V <150uA
SET POINT ACCURACY
GAIN ADJUST
LINEARITY
1%
1%
<0.5% (15% TO 100% VOUT)
<0.005%/HR*³
STABILITY
12V INPUT MODELS: 0 TO +5V = 0 TO 100% VOUT
VOLTAGE MONITOR*5
5V INPUT MODELS: 0 TO +2.048V = 0 TO 100% VOUT
12V INPUT MODELS: +5V +/- 1% , UP TO 1 mA
5V INPUT MODELS: +2.048V +/- 1% , UP TO 1 mA
REFERENCE OUTPUT
TEMPCO
<25PPM/°C*³
THERMAL SHOCK LIMIT
1°C/10 SEC.
OPERATING: -10° TO +50°C (CASE)
STORAGE: -25° TO +95°C
OPERATING: -55 TO +70°C (CASE)
STANDARD TEMPERATURE RANGES
EXTENDED TEMPERATURE RANGES (-T OPTION)
STORAGE: -55° TO +95°C
APPLICATION NOTES
Sequencing
Dynamic Response
As is the case for all active electronics, the user should apply power
prior to control inputs. For the CA Series, it is recommended to wait
at least 100msec after input power is applied before sending a voltage
programming.command.
In cases where the output voltage rises above the voltage programming
command then settles. To mitigate this effect, ramp the voltage program-
ming input at a slower rate until satisfactory results are achieved.
DETAILED PRODUCT DESCRIPTION
The CA Series of high performance, precision regulated, high voltage
power supplies offers improved performance and added features. Im-
provements in stability and ripple, along with an on board precision
reference, a voltage monitor and increased protection, enable these
modules to replace much larger, more expensive power supplies in
many applications. Each model is programmed from 0 to 100% of rat-
ed output via a DAC compatible high impedance programming input. A
voltage monitor is provided and is internally buffered to provide a low
impedance (up to 1 mA) signal to external circuitry. The precision, on
board reference can be used in conjunction with an external potenti-
ometer or voltage divider to program the high voltage output. Each unit
has an accessible potentiometer allowing for individual calibration after
installation. A quasi-sinewave oscillator, internal transformer shielding,
and an isolated steel case reduce EMI/RFI radiation to extremely low
levels. Suitable for photomultiplier tubes, avalanche photodiodes, preci-
sion EO lenses, piezo devices and other applications requiring precision,
low noise, high voltage in a miniature, pc or chassis mount, cost effective
package.
Also available with the CA Series are the CM Series adapter kits. For
more details, refer to pages 7 and 8.
Small quantities available from stock from our factory or our stocking dis-
tributor in Switzerland, Condatas AG. For large quantity requests please
consult our factory or our stocking distributor in Switzerland, Condatas
AG.
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
PAGE 3 OF 8
4709BO
CA SERIES
MECHANICAL SPECIFICATIONS CA
PCB LAYOUT
COMPONENT SIDE
SEALED TO WITHSTAND IMMERSION CLEANING PROCESSES
DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS PARENTHESIS)
DIMENSIONAL TOLERANCES: .XX +- 0.02 (0.51MM), .XXX +- 0.005 ( 0.127MM)
PIN #
FUNCTION
PARAMETER
WEIGHT
VALUE
1
2
3
4
5
6
7
8
OUTPUT VOLTAGE
PROGRAMMING VOLTAGE INPUT
GROUND
1.4 OZ. (36.9 GRAMS)
VOLUME
0.96 CUBIC INCHES (15.77 CUBIC CENTIMETERS)
1.75L (44.45L) x 1.10W (27.94W) x 0.50H (12.70H)
ZINC PLATED STEEL
DIMENSIONS
CASE MATERIAL
VOLTAGE REFERENCE OUTPUT
CASE GROUND *4
INPUT VOLTAGE
VOLTAGE MONITOR
OUTPUT RETURN
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
PAGE 4 OF 8
4709BO
CA SERIES
MECHANICAL SPECIFICATIONS CA-T
PCB LAYOUT
COMPONENT SIDE
SEALED TO WITHSTAND IMMERSION CLEANING PROCESSES
DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS PARENTHESIS)
DIMENSIONAL TOLERANCES: .XX +- 0.02 (0.51MM), .XXX +- 0.005 ( 0.127MM)
PIN #
FUNCTION
PARAMETER
WEIGHT
VALUE
1
2
3
4
5
6
7
8
OUTPUT VOLTAGE
PROGRAMMING VOLTAGE INPUT
GROUND
1.4 OZ. (36.9 GRAMS)
VOLUME
1.03 CUBIC INCHES (16.84 CUBIC CENTIMETERS)
1.80L (45.72L) x 1.12W (28.45W) x 0.51H (12.95H)
ALUMINUM
DIMENSIONS
CASE MATERIAL
VOLTAGE REFERENCE OUTPUT
CASE GROUND*4
INPUT VOLTAGE
VOLTAGE MONITOR
OUTPUT RETURN
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
PAGE 5 OF 8
4709BO
CA SERIES
BLOCK DIAGRAM
OPTIONS
OPTION
ORDER CODE
POSITIVE OUTPUT
p
N
5
POLARITY DESIGNATOR
NEGATIVE OUTPUT
5 VDC
INPUT VOLTAGE
12 VDC (STANDARD)
BLANK
BLANK
STANDARD OPERATING TEMP -10º TO +50ºC (CASE TEMP.)
TEMPERATURE
RoHS
EXTENDED OPERATING TEMPERATURE -55º TO +70ºC (CASE TEMP.)
VERSION
T
R
HOW TO ORDER
PART NUMBER SELECTOR:
Model Number:
CA 10 N - 5 T R
CA - Model
R - RoHS (Optional)
10 - Output Voltage (See table)
N - Polarity Designator
T - Extended Operating Temperature
5 - Input Voltage
EXAMPLE: CA10N-5TR (CA - Model, 10 - Output Voltage, N - Negative, 5 - Input Voltage, T - Extended Operating Temperature, R - RoHS (Optional))
* Notes:
1. Maximum rated output current is typically available from 100% max output voltage to 50% max output voltage,
and is derated below 50% max output voltage.
o
2. Specifications after 1 hour warm-up, full load, at 25 C unless other wise indicated.
3. Typical Performance
www.emcohighvoltage.com
4. All grounds internally connected, except case. There should not be more than 50 volts potential between
the case ground (pin 5) and the circuit ground (pins 3 and 8). Isolated case assists low noise design efforts.
Case pin must be connected to ground for proper operation.
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
5. On negative output models, voltage monitor output is a buffered representation of the programming voltage.
PAGE 6 OF 8
4709BO
CA SERIES - ACCESSORY
CM1: ALL CA MODELS
PRODUCTDESCRIPTION
PROGRAMMING OPTIONS / INSTRUCTIONS
1. Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn
potentiometer to adjust high voltage.
2. Remote Potentiometer: connect wiper arm to pin 3, other sides
to pins 4 and 2.
3. Remote Analog Signal: apply programming voltage to pin 3, re-
turn to pin 2.
These adapters provide convenient proto-typing and evaluation during
system development and integration, and allow these modules to be
mounted to a chassis instead of designed in to a pc board.
Extra filtering on the input and output improves performance. A schott-
ky diode on the input provides reverse polarity protection. Input con-
nector is via a 15P SUB MIN-D plug (mate supplied) and output is via
an MHV style coaxial connector (mate supplied).
ORDERING INFORMATION:
Please note when ordering an CM1 the CA Series is not included and
must be ordered separately.
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
4709BO
PAGE 7 OF 8
CA SERIES - ACCESSORY
CM2: ALL CA MODELS
PRODUCTDESCRIPTION
PROGRAMMING OPTIONS / INSTRUCTIONS
1. Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn
potentiometer to adjust high voltage.
2. Remote Potentiometer: connect wiper arm to pin 3, other sides
to pins 4 and 2.
3. Remote Analog Signal: apply programming voltage to pin 3, re-
turn to pin 2.
These adapters provide convenient proto-typing and evaluation during
system development and integration, and allow these modules to be
mounted to a chassis instead of designed in to a pc board.
Extra filtering on the input and output improves performance. A schott-
ky diode on the input provides reverse polarity protection. Input con-
nector is via a 15P SUB MIN-D plug (mate supplied) and output is via
an SHV style coaxial connector (mate supplied).
ORDERING INFORMATION:
Please note when ordering an CM2 the CA Series is not
included and must be ordered separately.
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
We reserve the right to make changes without notification
PAGE 8 OF 8
4709BO
相关型号：
©2020 ICPDF网 联系我们和版权申明