DNR05US05-S [XPPOWER]
AC-DC Regulated Power Supply Module, 5W;型号: | DNR05US05-S |
厂家: | XP POWER LIMITED |
描述: | AC-DC Regulated Power Supply Module, 5W |
文件: | 总4页 (文件大小:177K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
5ꢀ60 Watts
DNR Series
xppower.com
•
•
•
•
•
•
•
Rugged Design for Industrial Applications
Up to 89% Efficiency
Full Power to +60 °C
Wide Adjustment Range
DC OK 24 V Models
DC Standby Versions
3 Year Warranty
Specification
Input
General
Input Voltage
• 90-264 VAC, 120-375 VDC (DNR05/10/18)
Efficiency
Isolation
• See tables
• 3000 VAC Input to Output, 1500 VAC Input
to Ground, 500 VAC Output to Ground
85-264 VAC, 90-375 VDC (DNR30/60)
• 47-63 Hz
Input Frequency
Input Current
Inrush Current
• See tables
Switching Frequency
Signals
• 132 KHz typical, 55-90 kHz (DNR60)
• 5-18 W: 10/18 A at 115/230 VAC
30 W: 20/40 A at 115/230 VAC
60 W: 30/60 A at 115/230 VAC
• DC ON indicator LED Green: All models
DC LOW indicator LED Red: 5-18 W models
DC OK: 24 V 30-60 W models
DC OK: All standby models
Power Factor
Earth Leakage Current • 0.8 mA max
Input Protection
• EN61000-3-2, class A
MTBF
• 800 kHrs typical Bellcore, Issue 6 at +40 °C,
GB (DNR05/10/18), 530 kHrs typical
• Internal fuse T2A, 250 VAC fitted in line
Bellcore, Issue 6 at +40 °C, GB (DNR30/60)
DIN Rail
• Compatible with TS35/7.5 or TS35/15
Output
Output Voltage
• See tables
• See tables
Environmental
Operating Temperature • -20 °C to +70 °C (DNR05/10/18)
Output Voltage Trim
Initial Set Accuracy
Minimum Load
•
1ꢀ
-40 °C to +70 °C, start up at -35 °C
• No minimum load required
• <1 s (may increase at low
temperature extremes)
(DNR30/60), all units derate linearly from
60 °C (see derating curves)
Start Up Delay
Cooling
• Convection-cooled with 25mm free space
all sides
• 20-95ꢀ RH, non-condensing
Start Up Rise Time
Hold Up Time
• <150 ms
• 30/130 ms at 115/230 VAC (DNR05)
25/100 ms at 115/230 VAC (DNR10)
20/75 ms at 115/230 VAC (DNR18)
20/30 ms at 115/230 VAC (DNR30)
20/30 ms at 115/230 VAC DNR60)
• 5-18 W: 1.0ꢀ max
30-60 W: 0.5ꢀ max
• 5-18 W: 2.0ꢀ max
30-60 W: 0.5ꢀ max
• Redundancy module DPM10 available
for load currents up to 10 A (not with
standby system), contact sales
• 4ꢀ max deviation recovery to within
1ꢀ in 2 ms for a 50ꢀ load change
Operating Humidity
Storage Temperature • -25 °C to +85 °C (DNR05/10/18)
-40 °C to +85 °C (DNR30/60)
• 15 g, 11 ms, X, Y & Z axis, 3 shocks/axis
in both directions
• 2 g, 10 Hz to 500 Hz, along X, Y & Z axis,
60 mins/axis, mounted on rail
Shock
Line Regulation
Load Regulation
Parallel Operation
Vibration
EMC & Safety
Emissions
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
• EN55022, level B conducted & radiated
• EN61000-3-2, class A
• EN61000-3-3
• EN61000-4-2, level 4, Perf Criteria A
• EN61000-4-3, level 3, Perf Criteria A
• EN61000-4-4, level 4, Perf Criteria A
Transient Response
Ripple & Noise
• 50 mV pk-pk, 20 MHz bandwidth (may
increase at low temperature extremes)
Overvoltage Protection • Output clamps at 120-145ꢀ Vnom,
auto recovery
• 110-145ꢀ constant current (DNR05-18)
105-150ꢀ power limited (DNR30/60)
Surge
• EN61000-4-5, installation class 3,
Perf Criteria A
Overload Protection
Conducted Immunity
Magnetic Field
Dips & Interruptions
• EN61000-4-6, level 3, Perf Criteria A
• EN61000-4-8, level 4 Perf Criteria A
• EN61000-4-11, 30ꢀ 10 ms,
60ꢀ 100 ms, 100ꢀ 5000 ms
Perf Criteria A, B, B
Short Circuit Protection • Power limited, auto recovery
Temperature
Coefficient
•
0.03ꢀ/°C
Safety Approvals
• EN60950-1, UL508 Pollution Degree 2,
UL1310 class 2 power recognised,
See note 3 & ratings table,
UL60950-1 Overvoltage Category II,
UL508 Overvoltage Category III,
DNR30 & DNR60: SEMI F47
ANSI/ISA 12.12.01. Class 1, Division 2
Groups A,B,C and D
DNR05ꢀ60
Models and Ratings
Input Current (typ.)
Output
Output
Voltage Trim
Output Current Efficiency (typ.)
Model Number
115 VAC
0.12 A
0.12 A
0.12 A
0.12 A
0.20 A
0.20 A
0.20 A
0.20 A
0.36 A
0.36 A
0.36 A
0.36 A
0.56 A
0.56 A
0.56 A
0.56 A
1.10 A
1.10 A
1.10 A
1.10 A
230 VAC
0.08 A
0.08 A
0.08 A
0.08 A
0.13 A
0.13 A
0.13 A
0.13 A
0.21 A
0.21 A
0.21 A
0.21 A
0.33 A
0.33 A
0.33 A
0.33 A
0.59 A
0.59 A
0.59 A
0.59 A
Voltage
(1)
5 V
12 V
15 V
24 V
5 V
4.50-5.75 V
10.80-13.80 V
13.50-17.25 V
21.60-28.80 V
4.50-5.75 V
1.000 A
0.420 A
0.340 A
0.210 A
2.000 A
0.840 A
0.670 A
0.420 A
3.000 A
1.500 A
1.200 A
0.750 A
6.000 A
2.500 A
1.250 A
0.625 A
10.000 A
5.000 A
2.500 A
1.250 A
69ꢀ
72ꢀ
72ꢀ
72ꢀ
73ꢀ
75ꢀ
76ꢀ
76ꢀ
75ꢀ
77ꢀ
77ꢀ
77ꢀ
79ꢀ
84ꢀ
86ꢀ
86ꢀ
79ꢀ
86ꢀ
89ꢀ
89ꢀ
DNR05US05
(1)
DNR05US12
(1)
DNR05US15
(1)
DNR05US24
(1)
DNR10US05
(1)
12 V
15 V
24 V
5 V
10.80-13.80 V
13.50-17.25 V
21.60-28.80 V
4.50-5.75 V
DNR10US12
(1)
DNR10US15
(1)
DNR10US24
(1)
DNR18US05
(1)
12 V
15 V
24 V
5 V
10.80-13.80 V
13.50-17.25 V
21.60-28.80 V
5.00-5.50 V
DNR18US12
(1)
DNR18US15
(1)
DNR18US24
(1,3,4)
DNR30US05
(1,3,4)
12 V
24 V
48 V
5 V
12.00-14.00 V
24.00-28.00 V
48.00-55.00 V
5.00-5.50 V
DNR30US12
(1,3,4)
DNR30US24
(1,3,4)
DNR30US48
(1,3,4)
DNR60US05
(1,3,4)
12 V
24 V
48 V
12.00-14.00 V
24.00-28.00 V
48.00-55.00 V
DNR60US12
(1,3,4)
DNR60US24
(1,3,4)
DNR60US48
Notes
1. Add suffix ‘-S’ for spring clamp connection option.
2. 30-60 W models are suitable for battery-charging applications.
3. Approved to UL1310, but 5 & 12 V not Class 2 Power recognised.
4. SEMI F47 compliant.
Derating Curves
100
DNR05ꢀ18 W Models
80
60
40
20
0
20
30
40
-20
0
10
50
60
70
DNR30ꢀ60 W Models
100
80
60
40
20
0
20
30
Ambient Temp (˚C)
40
-40
0
10
50
60
70
DNR05ꢀ60
Mechanical Details
DNR05/10/18 W Models
0.89
(22.5)
4.53 (115.0)
2
1
-V
+V
DC
Output
DC LO
ON
3.48
(88.5)
Voltage
Trim
N
L
3
1
AC Input
DNR05, 10, 18 Connections
Designation
Ground
Neutral
Line
Positive
Negative
Conn Pin
1
AC
2
Notes
Input
3
1. All dimensions in inches (mm).
2. Weight 0.33 lb (150 g) approx.
3. Tolerance: 0.02 (0.5) maximum.
4. Connection screw maximum torque:
DC
Output
1
2
Input: 9 lbs-in (1.0 Nm), Output: 5.5 lbs-in (0.6 Nm)
30/60 W Models
1.59
(40.5)
4.53 (115.0)
5
1
-V -V +V +V DC
OK
DC Output
Voltage
Trim
3.60
(90.0)
ON
N
L
1
3
DNR30/60 Connections
Designation
Ground
Neutral
AC Input
Conn Pin
1
AC
2
Input
3
Line
1
2
DC OK*
Positive
Positive
Negative
Negative
DC
3
Output
4
Notes
1. All dimensions in inches (mm).
2. Weight 0.8 lb (350 g) approx.
4. Connection screw maximum torque:
5
Input: 9 lbs-in (1.0 Nm), Output: 5.5 lbs-in (0.6 Nm)
3. Tolerance: 0.02 (0.5) maximum.
* 24 V and standby models only.
DNR05ꢀ60
Standby Versions
5
1
Maximum current drain from battery by PSU when inactive 22 mA
-V -V +V +V DC
OK
+V
+V
DNR30/60 Connections
DC Output
Conn
Pin
1
2
Designation
Ground
Neutral
DC OK
AC Input
Voltage
Trim
3
Line
D1
1
DC OK
e.g. IN4001
2
3
4
5
Positive
Positive
Negative
Negative
LOAD
DC Output
ON
Fuse
Notes
1. With AC in, unit provides power to the load and to charge the
battery. The DC OK signal acts by sensing a voltage on +V and
holds the relay closed.
2. With loss of AC in, battery voltage is present on +V. DC OK
signal holds the relay closed. Battery supplies power to the load.
3. As the battery discharges, its voltage falls. When this falls below
the level shown in the table below the DC OK signal switches off
to allow the relay to open to disconnect and protect the battery.
Lead
Acid
Battery
-V
-V
N
L
1
3
DNR30/60 connection for DC
standby system applications
AC Input
Output Set Voltages For Standby Versions
Model(1)
Voltage
13.6 V
27.2 V
54.5 V
13.6 V
27.2 V
54.5 V
Current
2.20 A
1.10 A
0.55 A
4.40 A
2.20 A
1.10 A
DC OK Signal Off
Efficiency
84ꢀ
DNR30US12#
DNR30US24#
DNR30US48#
DNR60US12#(2)
DNR60US24#
DNR60US48#
10.30-11.30 V
21.10-22.10 V
42.70-43.70 V
10.30-11.30 V
21.10-22.10 V
42.70-43.70 V
86ꢀ
86ꢀ
86ꢀ
89ꢀ
89ꢀ
Notes
1. Suffix # indicates standby version.
2. Not UL1310 approved.
DC OK
30/60 W Models
Output good = 24 V Output not good = 0 V
RL > 700Ω
N/O
N/C
DCOK
-Vout
DCOK
22 K
0.5 W
5.1 V
0.3 W
-Vout
Common
Example using external components
to create TTL signal
Example using external relay
to create volt-free contact
Standard on 24 V models, 30-60 W only.
21-Jan-11
相关型号:
©2020 ICPDF网 联系我们和版权申明