ECH450PS36 [XPPOWER]
AC-DC Power Supplies;型号: | ECH450PS36 |
厂家: | XP POWER LIMITED |
描述: | AC-DC Power Supplies |
文件: | 总11页 (文件大小:1295K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AC-DC Power Supplies
ECH450 Series
450 Watts
• Force cooled and convection cooled ratings
• Medical and ITE approvals
• Compact 3.0” by 5.0” footprint
• Suitable for BF applications
• 5 V standby and remote on/off
• 12 V fan output
• -20 °C to +70 °C operation
• High efficiency, up to 95%
Approved for medical and ITE applications, this range of forced and convection cooled single
output AC/DC power supplies are packaged in an ultra compact foot print of just 5.0” by 3.0”.
Dimensions:
ECH450:
The ECH450 provides up to 450W force cooled and 250W convection cooled leading to very high
power densities of 20W/in . A 12V, 600 mA fan supply is included in the design to faciliate system
3.00 x 5.00 x 1.42” (76.2 x 127.0 x 36.1 mm)
3
ECH450-TF, ECH450-C:
3.41 x 5.00 x 1.97” (86.6 x 127.0 x 50.0 mm)
cooling, along with 5 V/1 A standby output. The power supply contains two fuses and low leakage
currents as required by medical applications and is safety approved to operate in a 70°C ambient.
ECH450-EF:
The ECH450 series is designed to minimize the no load power consumption and maximize
efficiency to facilitate equipment design to meet the latest environmental legislation and the low
profile and safety approvals covering ITE and medical standards along with conducted emissions
to EN55011/32 level B allow the versatile ECH450 series to be used in a vast range of applications.
3.15 x 5.83 x 1.60” (80.0 x 148.2 x 40.6 mm)
Models & Ratings
Output Current
Output
Voltage
Optional Standby Output
Fan Output(2)
Efficiency(1)
Model Number(4)
Forced cooled
Convection cooled
12.0 V
15.0 V
19.0 V
24.0 V
36.0 V
48.0 V
54.0 V
37.5A
30.0A
23.7A
18.8A
12.5A
9.4A
20.8A
12 V/0.6 A
12 V/0.6 A
12 V/0.6 A
12 V/0.6 A
12 V/0.6 A
12 V/0.6 A
12 V/0.6 A
93%
95%
95%
95%
95%
95%
95%
ECH450PS12
ECH450PS15
ECH450PS19
ECH450PS24
ECH450PS36
ECH450PS48
ECH450PS54
5 V/1.0 A
5 V/1.0 A
5 V/1.0 A
5 V/1.0 A
5 V/1.0 A
5 V/1.0 A
5 V/1.0 A
16.6A
13.0A
10.4A
6.9A
5.2A
8.33A
4.63A
Notes
1. Typical efficiencies measured at 100% load and 230 VAC input.
2. Typical voltage, actual regulated voltage will be in range of 11.4V to 12.6V.
3. Regulation of the fan output requires a minimum load of 10W on the main output.
4. Add s
uffix -C to part number for vented cover version, -TF for top fan version and
-EF for end fan version.
Input
Characteristic
Minimum
Typical
Maximum
Units
Notes & Conditions
Input Voltage - Operating
Input Frequency
90
47
115/230
50/60
>0.9
264
63
VAC
Hz
Derate output from 100% at 100 VAC to 90% at 90 VAC
Power Factor
230VAC, 100% load. EN61000-3-2 class A, class C >175W
Input Current - Full Load
Inrush Current
4.5/2.3
A
A
115/230 VAC
120
300
0.21
230 VAC cold start, 25 ºC
Earth Leakage Current
No load Input Power
Input Protection
80/135
µA
W
115/230 VAC/50 Hz (Typ), 264 VAC/60 Hz (Max)
When main output is Inhibited
F8A/250 V Internal fuse fitted in line and neutral.
www.xppower.com
1
AC-DC Power Supplies
ECH450 Series
Output - Main Output
Characteristic
Output Voltage - V1
Initial Set Accuracy
Minimum Load
Start Up Delay
Hold Up Time
Drift
Minimum
Typical
Maximum
Units
VDC
%
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
No minimum load required
115/230 VAC full load.
Min at full load, 115 VAC.
After 20 min warm up
90-264 VAC
12
54
1
0
A
2
s
10
ms
%
0.02
0.5
1
Line Regulation
Load Regulation
%
%
0-100% load.
Recovery within 1% in less than 500 µs
for a 50-75% and 75-50% load step
Transient Response
4
%
Over/Undershoot
Ripple & Noise
2
5
2
%
Full load
20 MHz bandwidth and 10 µF electrolytic capacitor in
parallel with 0.1 µF ceramic capacitor.
% pk-pk
Overvoltage Protection
Overload Protection
110
110
130
130
%
Vnom, recycle input to reset
% I nom
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
Trip & Restart
0.02
50
%/˚C
µA
Measured internally, Auto Resetting
264 VAC / 60 Hz
Output Leakage Current
Output - 5 V Standby Output
Characteristic
Minimum
Typical
Maximum
Units
Notes & Conditions
Output Voltage
Initial Set Accuracy
Minimum Load
Start Up Delay
Hold Up Time
Drift
5.0
VDC
%
A
1
50% load, 115/230 VAC
0
0.5
s
115/230 VAC full load.
Min at full load, 115 VAC.
After 20 min warm up
90-264 VAC
500
ms
%
%
%
0.02
0.5
5
Line Regulation
Load Regulation
0-100% load.
Recovery within 1% in less than 500 µs
for a 50-75% and 75-50% load step
Transient Response
Over/Undershoot
Ripple & Noise
4
5
%
%
Full load
20 MHz bandwidth and 10 µF electrolytic capacitor in parallel
with 0.1 µF ceramic capacitor
2
% pk-pk
A
Overload Protection
Short Circuit Protection
Temperature Coefficient
Remote On/Off
2.0
Trip & Restart
0.02
%/˚C
See Application Note
General
Characteristic
Minimum
Typical
Maximum
Units
Notes & Conditions
Efficiency
53
%
230 VAC Full load (see fig. 1 to 4)
2x MOPP
4000
1500
1500
VAC
VAC
VAC
kHz
kHz
kHz
Isolation: Input to Output
Input to Ground
1x MOPP
Output to Ground
1x MOPP
70
PFC, Fixed
82
22
185
85
Main converter, Variable
For 5V standby output, Variable
Switching Frequency
3
Power Density
21
W/in
kHrs
Mean Time Between Failure
300
MIL-HDBK-217F, Notice 2 +25 °C GB
Open frame
0.86 (390)
1.26 (570)
-C version
Weight
lb(g)
1.29 (585)
1.46 (660)
-TF version
-EF version
www.xppower.com
2
AC-DC Power Supplies
ECH450 Series
Efficiency Vs Load
Figure 1 - ECH450PS12 (250W)
Figure 2 - ECH450PS12 (450W)
#
#
#
#
#
#
(""#
'"#
&"#
%"#
$"#
!"#
("
)"
*"
+"
!"
$"
%"
&"
'"
(""
("
)"
*"
+"
!"
$"
%"
&"
'"
()*+,-./
()*+,-./
Figure 3 - ECH450PS24 (250W)
Figure 4 - ECH450PS24 (450W)
"#
(""#
'"#
&"#
%"#
$"#
!"#
#
#
#
#
#
("
)"
*"
+"
!"
$"
%"
&"
'"
(""
("
)"
*"
+"
!"
$"
%"
&"
'"
()*+,-./
()*+,-./
100VAC input
230VAC input
Environmental
Characteristic
Minimum
Typical
Maximum
Units
Notes & Conditions
Operating Temperature
-20
+70
+85
°C
See derating curve, figure 5
Storage Temperature
Cooling
-40
10
5
°C
CFM
%RH
m
Forced-cooled > 250W
Non-condensing
ITE/Medical
Humidity
95
Operating Altitude
Shock
5000/4000
3 x 30g shocks in each plane, total 18 shocks. 30g = 11ms (+/- 0.5msecs), half sine. Conforms to EN60068-2-27
Single axis 10-500 Hz at 2g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6
Vibration
ting Curves
Temperature Dera
Figure 5
450
250
225
125
0
-20
0
+50
+70
Ambient Temperature (ºC)
www.xppower.com
3
AC-DC Power Supplies
ECH450 Series
EMC: Emissions
Phenomenon
Conducted
Radiated
Standard
Test Level
Class B
Class B
Class A
Criteria
Notes & Conditions
EN55011/32
EN55011/32
Harmonic Current
Voltage Functions
EN61000-3-2
EN61000-3-3
Class C for load >175 W
EMC: Immunity
Phenomenon
Medical Device EMC
Low Voltage PSU EMC
ESD
Standard
Test Level
Ed.4.0 : 2014
Criteria
Notes & Conditions
IEC60601-1-2
EN61204-3
as below
High severity level
as below
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
4
A
A
A
A
A
A
A
B
B
A
A
B
A
B
B
B
B
A
B
A
A
B
8kV contact, 15kV air
Radiated
3
EFT
3
Surges
Installation class 3
3
Conducted
Magnetic Fields
4
Dip >95% (0 VAC), 8.3 ms
Dip 30% (70 VAC), 416 ms
Dip >95% (0 VAC), 4160 ms
Dip >95% (0 VAC), 10.0 ms
Dip 30% (168 VAC), 500 ms
Dip >95% (0 VAC), 5000 ms
Dip 100% (0 VAC), 10.0 ms
Dip 100% (0 VAC), 20 ms
Dip 60% (40 VAC), 100 ms
Dip 30% (70 VAC), 500 ms
Dip 100% (0 VAC), 5000 ms
Dip 100% (0 VAC), 10.0 ms
Dip 100% (0 VAC), 20 ms
Dip 60% (96 VAC), 100 ms
Dip 30% ( 168 VAC), 500 ms
Dip 100% (0 VAC), 5000 ms
EN55024 (100 VAC)
EN55024 (240 VAC)
Dips and Interruptions
EN60601-1-2 (100 VAC)
EN60601-1-2 (240 VAC)
Safety Approvals
Safety Agency
Safety Stan
IEC60950-1
UL62368-1
EN62368-1
LVD
dard
Notes & Conditions
CB Report
UL
, IEC62368
Information Technology
Information Technology
Information Technology
TUV
CE
Safety Agency
CB Report
UL
Safety Stan
IEC60601-1
ANSI/AAMI
EN60601-1
dard
Notes & Conditions
Medical
Ed 3.1 Including Risk Management
ES60601-1 & CSA C22.2 No.60601-1:08
Medical
TUV
Medical
Isolation
Level
Notes & Conditions
Primary to Secondary
Primary to Earth
Secondary to Earth
2 x MOPP (
1 x MOPP (
1 x MOPP (
Means of Patient Protection)
Means of Patient Protection)
Means of Patient Protection)
IEC60601-1 Ed 3.1
www.xppower.com
4
AC-DC Power Supplies
ECH450 Series
Mechanical Details
1.96 (50.0)
CN2 - Output Connector
Standard Open Frame
12-24V
Pin 1
+Vout
+Vout
+Vout
-Vout
-Vout
+Vout
+Vout
-Vout
-Vout
-Vout
Fan
Pin 2
Pin 3
Pin 4
1.18
(30.0)
Pin 5
5.0 (127.0)
0.12
(3.17)
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
4.75 (120.65)
Ground
Size: 6.3 x 0.8mm
4-ø3.5
0.12
(3.17)
T3
Mates with Molex 39-01-2100
3.0
(76.2)
L
CN1
N
CN3 - Fan Connector
2.75
(69.85)
C39
Pin 1
Pin 2
Fan+
Fan-
6
1
5
CN2
L3
Mates with JST housing PHR-2
1
2
10
C5
CN202 - Signal Connector
Pin 1
+5V Standby
CN3 fan out
Pin 2
Pin 3
Return
Remote On/Off
Q3
+5VSB Board
2-M2.5
3
1
Mates with JST housing XHP
CN202
1.26
(32.0)
Notes
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
2. Weight: 0.86lbs (390g) approx.
0.1
(2.5)
0.69
(17.5)
1.99 (50.5)
0.79 (20.0)
0.06
(1.6)
36-48V
Fan
CN2 - Output Connector
1.96 (50.0)
Pin 1
Pin 2
Pin 3
Pin 4
+Vout
+Vout
-Vout
-Vout
1.18
(30.0)
5.0 (127.0)
0.12 (3.17)
4.75 (120.65)
4 x ø3.5
Ground
Mates with JST housing VHR-4N
Size: 6.3x0.8mm
CN3 - Fan Connector
Pin 1
Pin 2
Fan+
Fan-
CN4
C39
T3
L
3.0
(76.2)
CN1
1
2
Mates with JST housing PHR-2
N
CN202 - Signal Connector
Pin 1
+5V Standby
Pin 2
Pin 3
Return
Remote On/Off
CN2
L3
1
3
1
2
C5
Q3
Fan out
CN3
Mates with JST housing XHP
CN4 - Remote Sense
Pin 1
Pin 2
2-M2.5
CN202
+Sense
-Sense
1.26
(32.0)
Mates with JST housing PHR-2
0.06
0.1
(2.5)
0.69
(1.6)
(17.5)
Notes
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
1.99 (50.5)
0.79 (20.0)
2. Weight: 0.86lbs (390g) approx.
www.xppower.com
5
AC-DC Power Supplies
ECH450 Series
Mechanical Details
CN2 - Output Connector
End Fan Version (-EF)
12-24V
1.02
(26.0)
Pin 1
+Vout
+Vout
+Vout
-Vout
-Vout
+Vout
+Vout
-Vout
-Vout
-Vout
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
1.60
(40.6)
4-M3
0.51
(13.0)
4.83 (122.8)
5.83 (148.2)
0.15
(3.75)
0.14
(3.45)
5.56 (141.3)
3.15
(80.0)
Mates with Molex 39.01-2100
L
CN1
CN202 - Signal Connector
Pin 1
+5V Standby
2.85
(72.5)
N
Airflow
direction
Pin 2
Pin 3
Return
Remote On/Off
6
1
2
CN2
1
2
10
Mates with JST housing XHP
Notes
4-ø3.2
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
+5VSB Board
3
1
2. Weight: 1.46lbs (660g) approx.
CN202
4.83 (122.8)
0.51 (13.0)
Measuring the
screw protrusion :
limit 2.5mm
0.10
(2.5)
1.6
(40.6)
1.02
(26.0)
Customer system chassis
36-48V
CN2 - Output Connector
1.02
(26.0)
Pin 1
Pin 2
Pin 3
Pin 4
+Vout
+Vout
-Vout
-Vout
1.60
(40.6)
4-M3
0.51 (13.0)
4.83 (122.8)
Mates with JST housing VHR-4N
5.83 (148.2)
5.56 (141.3)
0.15
(3.75)
0.14
(3.45)
CN202 - Signal Connector
Pin 1
Pin 2
Pin 3
+5V Standby
Return
Remote On/Off
3.15
(80.0)
CN4
L
2.85
(72.5)
CN1
N
1
2
Mates with JST housing XHP
Airflow
direction
CN2
CN4 - Remote Sense
1
3
1
2
Pin 1
Pin 2
+Sense
-Sense
FAN OUT
CN3
CN202
Mates with JST housing PHR-2
4-ø3.2
Measuring the
screw protrusion :
limit 2.5mm
4.83 (122.8)
0.51 (13.0)
0.10
(2.5)
1.60
(40.6)
1.02
(26.0)
Notes
Customer system chassis
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
2. Weight: 01.46lbs (660g) approx.
www.xppower.com
6
AC-DC Power Supplies
ECH450 Series
Mechanical Details
Covered Version (-C)
12-24V
CN2 - Output Connector
2.68 (68.0)
1.0
(25.5)
Pin 1
+Vout
+Vout
+Vout
-Vout
-Vout
+Vout
+Vout
-Vout
-Vout
-Vout
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
1.97
(50.0)
1.75
(44.5)
Mates with Molex 39.01-2100
5.0 (127.0)
0.1
(2.6)
4.68 (118.9)
Ground
Size: 6.3x0.8mm
0.16
(4.05)
CN3 - Fan Connector
Pin 1
Pin 2
Fan+
Fan-
3.41
(86.6)
Mates with JST housing PHR-2
L
CN1
N
CN202 - Signal Connector
Pin 1
+5V Standby
3.20
(81.4)
Pin 2
Pin 3
Return
Remote On/Off
6
1
5
Mates with JST housing XHP
CN2
1
2
10
Notes
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
2. Weight: 1.26lbs (570g) approx.
CN3 FAN OUT
4-ø3.2
+5VSB Board
3
1
CN202
1.97
(50.0)
1.75
(44.5)
2.99 (76.0)
1.0 (25.5)
8-M3
Measuring the
screw protrusion :
limit 2.5mm
0.1
(2.5)
1.55 (39.4)
1.26 (32.0)
1.5
(38.2)
Customer
system
chassis
1.32
(33.5)
1.04
(26.3)
1.26
(31.9)
1.93 (49.1)
1.72 (43.7)
www.xppower.com
7
AC-DC Power Supplies
ECH450 Series
Mechanical Details
Covered Version (-C)
36-48V
.5)
1.0 (25
8.0)
2.68 (6
7.0)
5.0 (12
0.1
0.16
(4.05)
(2.6)
18.9)
4.68 (1
d
Groun
8mm
.3 x 0.
Size: 6
3.41
(86.6)
L
CN1
N
CN4
2
1
3.2
(81.4)
V+
CN2
V0
1
3
1
2
CN3
Fan
out
CN202
CN2 - Output Connector
1.97
(50.0)
Pin 1
+Vout
+Vout
-Vout
-Vout
Pin 2
Pin 3
Pin 4
1.75
(44.5)
Mates with JST housing VHR-4N
ring the
Measu
screw
limit 2.
CN3 - Fan Connector
ion :
protrus
5mm
.5)
1.0 (25
Pin 1
Pin 2
Fan+
Fan-
6.0)
2.99 (7
2.0)
1.26 (3
9.4)
1.55 (3
8-M3
)
0.1 (2.5
Mates with JST housing PHR-2
CN202 - Signal Connector
Pin 1
+5V Standby
Pin 2
Pin 3
Return
Remote On/Off
ssis
em cha
er syst
Custom
1.50
(38.2)
Mates with JST housing XHP
1.32
(33.5)
CN4 - Remote Sense
Pin 1
Pin 2
+Sense
-Sense
1.26
(31.9)
1.04
(26.3)
Mates with JST housing PHR-2
9.1)
1.72 (
43.7)
1.93 (4
Notes
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
2. Weight: 1.26lbs (570g) approx.
8
www.xppower.com
AC-DC Power Supplies
ECH450 S
eries
Mechanical Details
Top Fan Version (TF)
12-24V
2.68 (68.0)
1.0
(25.5)
CN2 - Output Connector
Pin 1
+Vout
+Vout
+Vout
-Vout
-Vout
+Vout
+Vout
-Vout
-Vout
-Vout
1.97
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
(50.0)
1.75
(44.5)
5.0 (127.0)
0.1
(2.6)
Mates with Molex 39.01-2100
4.68 (118.9)
Ground
Size: 6.3 x 0.8mm
0.16
(4.05)
CN202 - Signal Connector
Pin 1
+5V Standby
3.41
(86.6)
Pin 2
Pin 3
Return
Remote On/Off
L
Mates with JST housing XHP
CN1
N
3.20
(81.4)
Notes
6
1
5
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
2. Weight: 1.29lbs (585g) approx.
CN2
1
2
10
4-ø3.2
+5VSB Board
3
1
Airflow
direction
CN202
1.97
(50.0)
1.75
(44.5)
2.99 (76.0)
1.0 (25.5)
8-M3
1.55 (39.4)
1.26 (32.0)
Measuring the
screw protrusion :
limit 2.5mm
0.1
(2.5)
1.5
(38.2)
Customer
system
chassis
1.32
(33.5)
1.26
1.04
(31.9)
(26.3)
1.72 (43.7)
1.93 (49.1)
www.xppower.com
9
AC-DC Power Supplies
ECH450 S
eries
Mechanical Details
2.68 (68.0)
1.0 (25.5)
Top Fan Version (TF)
36-48V
1.97
(50.0)
1.75
(44.5)
5.0 (127.0)
0.1
(2.6)
0.16
(4.05)
4.68 (118.9)
Ground
Size: 6.3 x 0.8mm
3.41
(86.6)
L
CN1
N
CN4
2
3.2
1
(81.4)
V+CN2
V0
1
1
2
CN3
3
Fan
out
Airflow
direction
CN2 - Output Connector
Pin 1
+Vout
+Vout
-Vout
-Vout
Pin 2
Pin 3
Pin 4
1.97
(50.0)
Mates with JST housing VHR-4N
1.75
(44.5)
Measuring the
screw protrusion :
limit 2.5mm
CN202 - Signal Connector
Pin 1
Pin 2
Pin 3
+5V Standby
Return
Remote On/Off
2.99 (76.0)
1.0 (25.5)
1.55 (39.4)
1.26 (32.0)
8-M3
0.1 (2.5)
Mates with JST housing XHP
Customer system chassis
CN4 - Remote Sense
1.50
(38.2)
Pin 1
Pin 2
+Sense
-Sense
1.32
(33.5)
Mates with JST housing PHR-2
1.26
(31.9)
1.04
(26.3)
Notes
1. All dimensions shown in inches (mm).
Tolerance: 0.02 (0.5)
1.93 (49.1)
1.72 (43.7)
2. Weight: 1.29lbs (585g) approx.
www.xppower.com
10
AC-DC Power Supplies
ECH450 Series
Thermal Considerations
In order to ensure safe operation of the PSU in the end-use equipment, the temperature of the components listed in the table below must
not be exceeded. Temperature should be monitored using K type thermocouples placed on the hottest part of the component
(out of direct air flow). See Standard Open Frame Mechanical Details on page 5 for component locations.
Temperature Measurements (At Maximum Ambient)
Component
T3 Coil
L3 Coil
Q3 Body
C5
Max Temperature °C
110°C
120°C
120°C
105°C
105°C
C39
Service Life
The estimated service life of the ECH450 is determined by the cooling arrangements and load conditions experienced in the end application.
Due to the uncertain nature of the end application this estimated service life is based on the actual measured temperature of a key capacitor
with in the product when installed by the end application,
The graph below expresses the estimated lifetime of a given component temperature and assumes continuous operation at this temperature.
Estimated Service Life vs Component Temperature
Figure 6
80000
70000
60000
50000
C39
C5
40000
30000
20000
10000
0
105
95
85
75
65
55
45
C5 + C39 Temperature (ºC)
Remote On/Off
CN202 - Signal Connection
+5 V standby
To turn output off, connect Remote On/Off, Pin 3 to return, Pin 2.
Output is on if Remote On/Off, Pin 3 is floating or connected to
5V standby, Pin 1.
Pin 1
Pin 2
Pin 3
Return
Remote On/Off
www.xppower.com
11
26 March 20
相关型号:
©2020 ICPDF网 联系我们和版权申明