FS02CT-15 [XPPOWER]
Analog Circuit,;型号: | FS02CT-15 |
厂家: | XP POWER LIMITED |
描述: | Analog Circuit, |
文件: | 总9页 (文件大小:1085K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FS SERIES
ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS
200V to 6kV at 10W
PRODUCT SELECTION TABLE
OUTPUT
OUTPUT
OUTPUT
POWER*4
MODEL
VOLTAGE*2
CURRENT *1
(POSITIVE OR NEGATIVE)
FS02
FS03
FS05
FS10
FS20
FS30
FS40
FS50
FS60
0 to 200V
0 to 300V
0 to 500V
0 to 1kV
0 to 2kV
0 to 3kV
0 to 4kV
0 to 5kV
0 to 6kV
50mA
33.3mA
20mA
10mA
5mA
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
PRODUCT DESCRIPTION
The new FS Series of isolated, proportional DC to high voltage DC
converters offers stout design and enhanced features for excellent
long term reliability. Outputs ranging from 200V through 6kV are of-
fered in miniature, cost-effective, PC-mount packages. Based on XP
EMCO’s proven high-reliability, high voltage power conversion topol-
ogy, the FS Series boasts a full ten watts of output power for each
model and features a low 0.7V turn-on voltage. The output voltage
is proportional to the input voltage, from turn on to maximum output
voltage, enabling easy control of the high voltage. XP EMCO’s pro-
prietary, quasi-sinewave, resonant oscillator produces clean, reliable
high voltage with inherently low ripple, low EMI/RFI, low input ripple
current, and low conducted emissions. Additional features such as
arc protection*8, short circuit protection, surge current limiting, and
over-temperature protection are available.
3.33mA
2.5mA
2mA
1.67mA
Complete List of Models on pages 2 and 3
FEATURES
• Output Proportional and Linear to Input
<0.7V Turn-On Voltage
• SMART FEATURES for Enhanced Reliability:
Over-Temperature Protection with Automatic Shutdown and Error Code
Over-Voltage Protection with Automatic Shutdown and Error Code Output
• Disable Pin, TTL Compatible High=Off
• No Minimum Load Current Required
• Low-Noise, Quasi-Sinewave Oscillator
• Inaudible >25kHz Oscillator, Low EMI/RFI
• Low Conducted Emissions and Low Input Ripple Current
• Stable Operating Frequency Over Entire Operating Range
• High Input to Output Galvanic Isolation
• Very Low Input/Output Leakage Current: <100nA
• Very Low Input/Output Coupling Capacitance: <100pF
• Reversible Output Polarity (4kV Modules and Below)
• High Efficiency, No Derating Required
• Robust Design: Conservative Internal High Voltage Clearance and Voltage
Gradient Control for Exceptional Long-Term Reliability
• Arc Protection*8 and Short Circuit Protection*5
• Output Surge Current Limited
• High Reliability: MTBF > 840,000 Hours per Belcore TR 332
• Excellent Internal Thermal Management
• Anodized Aluminum Heatsink Surface
• Two Threaded, Blind Inserts Allow for Easy Heatsinking and/or
Chassis Mounting Options
APPLICATIONS
• Electrophoresis
• Piezo Devices
• Capacitor Charging
• Mass Spectrometry
• Electrostatic Chucks
• UL Certified Encapsulant, Meets 94V-0 Flammability
• RoHS Compliant
OPTIONS
• Available in Four Standard Input Voltage Ranges: 0–12, 15, 24, and 28V.
(For Other Input / Output Voltages, Consult Factory)
• Polarity: Choose Negative or Positive Outputs for Models FS50 and FS60
• Dual Output (Center Tap): Available for Models FS02CT through FS40CT
• B Version - Without Enhanced Features. See ‘B’ Drawing.
• Extended Operating Temperature: -55º to +85ºC (Case)(-T Option)*6
• Extended Environmental Screening and Burn-In Available, Consult Factory
WWW.XPPOWER.COM
4725V03
PAGE 1
FS SERIES
ELECTRICAL SPECIFICATIONS*3
DUAL
OUTPUT
(CENTER
TAP) MODEL
OUTPUT
CURRENT
REVERSIBLE
OUTPUT
VOLTAGE
OUTPUT
VOLTAGE
MODEL
RIPPLE*4
MODEL
FS02/FS02CT
FS03/FS03CT
FS05/FS05CT
FS10/FS10CT
FS20/FS20CT
FS30/FS30CT
FS40/FS40CT
50mA
33.3mA
20mA
10mA
5mA
<6%
<2%
FS02
FS03
FS05
FS10
FS20
FS30
FS40
0 to 200 VDC
0 to 300 VDC
0 to 500VDC
0 to 1 kV
FS02CT
FS03CT
FS05CT
FS10CT
FS20CT
FS30CT
FS40CT
0 to +/- 100V
0 to +/- 150V
0 to +/- 250V
0 to +/- 500V
0 to +/- 1kV
0 to +/- 1.5kV
0 to +/- 2kV
<2%
<1%
<2.5%
<2%
0 to 2kV
3.33mA
2.5mA
0 to 3kV
<1.5%
0 to 4kV
OUTPUT
CURRENT
POSITIVE
MODEL
OUTPUT
VOLTAGE
NEGATIVE
MODEL
OUTPUT
VOLTAGE
MODEL
RIPPLE*4
FS50P/FS50N
FS60P/FS60N
2mA
<2.5%
<2.5%
FS50P
FS60P
0 to +5kV
0 to +6kV
FS50N
FS60N
0 to -5kV
0 to -6kV
1.67mA
INPUT CURRENT
UP to FS40
FS50 & FS60
VIN
12V
15V
24V
28V
NO-LOAD
FULL-LOAD
<1.25A
<1.15A
<0.65A
<0.5A
NO-LOAD
FULL-LOAD
<0.3A
<0.4A
<1.5A
<0.25A
<0.15A
<0.125A
<0.34A
<0.2A
<1.25A
<0.75A
<0.65A
<0.175A
WWW.XPPOWER.COM
4725V03
PAGE 2
FS SERIES
ELECTRICAL SPECIFICATIONS*3
PARAMETER
VALUE
TURN-ON VOLTAGE
0.7V TYPICAL
ISOLATION
< +/- 2,500V BIAS ON PIN 4
-25º to +75ºC (CASE)*6
-55º to +85ºC (CASE)*6
-55º to +85ºC
OPERATING TEMPERATURE
OPTIONAL EXTENDED OPERATING TEMPERATURE
STORAGE TEMPERATURE
OUTPUT VOLTAGE TOLERANCE
EFFICIENCY
+/-5% FULL LOAD
75% - 85% TYPICAL
188uF (12V AND 15V in)
88uF (24V AND 28V)
25 TO 125kHz
INPUT CAPACITANCE
FREQUENCY
DETAILED PRODUCT DESCRIPTION
In addition, the internal transformer temperature and input voltage are
actively monitored with supervisory circuits and fed into a shutdown circuit,
preventing excessive input voltage or over-temperature failures. Should
preset limits be exceeded, the module will automatically shut down and
issue an error signal on pin 6 (TTL high).
The new FS Series of isolated, proportional DC to high voltage DC converters
offers stout design and enhanced features for excellent long-term reli-
ability. Outputs ranging from 200V through 6kV are offered in miniature,
cost-effective, PC-mount packages. Based on XP EMCO’s proven high-
reliability, high voltage power conversion topology, the FS Series boasts a
full ten watts of output power for each model and features a low 0.7V turn-on
voltage. The output voltage is proportional to the input voltage, from turn on
to maximum output voltage, enabling easy control of the high voltage. XP
EMCO’s proprietary, quasi-sinewave, resonant oscillator produces clean,
reliable high voltage with inherently low ripple, low EMI/RFI, low input ripple
current, and low conducted emissions. The frequency of the oscillator is
stable throughout the operating range, allowing for easy additional filtering,
and always operates well above the audio frequency range.
When the fault condition is removed, the unit restores itself to normal
operation, ensuring maximum reliability in the field. However, the pin 6
error signal will remain high until reset by power cycling the +5V logic.
The fault monitor circuit is powered by an external 5V to allow for 0.7 to
full input voltage proportional operation of the high voltage converter. The
FS Series also features an enable/disable function. A TTL high signal on
Pin #8 disables the high voltage output.
High power conversion efficiency, coupled with low internal thermal
resistance, creates a vigorous package able to withstand wide operating
temperatures. A unique integrated anodized aluminum heatsink surface
This series features sturdy, galvanic input-to-output high voltage isolation,
conservatively rated at +/-2,500V + Vout with less than 100pF of coupling
capacitance and less than 100nAof leakage current. Robustness and high
reliability have been designed into each model by incorporating output
arc surge current limiting and short circuit protection. Careful control over
internal voltage gradients extends the useful life calculated. Mean time
between failure (per Bellcore TR-332) exceeds 840,000 hours.
features two threaded blind inserts, which allow for optimal thermal manage
-
ment via external heatsink for high temperature operation and/or convenient
chassis mounting configurations. Aspecial proprietary encapsulating formula
optimizes internal dielectric strength that is UL-94V0 compliant while low
thermal resistance minimizes internal component temperature rise, resulting
in a robust module optimized for long-term reliability.
WWW.XPPOWER.COM
4725V03
PAGE 3
FS SERIES
MECHANICAL SPECIFICATIONS – Includes Smart Features
MODEL
(
)
+OUT
3
(
1
)
+IN
(
)
CT
5
(
)
-OUT
4
Dimensions are in inches (metric equivalents are in parentheses)
Dimensional tolerances: .xx +/- 0.02 (0.51mm)
.xxx +/- 0.005 (0.127mm)
PIN #
FUNCTION
FS02 thru FS40
PARAMETER
WEIGHT
VALUE
FS50 and FS60
(+) INPUT
<1.6 OUNCES (45 GRAMS)
1
2
3
4
(+) INPUT
VOLUME
1.27 CUBIC INCHES (20.8 CUBIC CENTIMETERS)
2.25L (57.15L) x 1.12W (28.50W) x 0.50H (12.70H)
(-) INPUT
(-) INPUT
DIMENSIONS
(+) OUTPUT
(-) OUTPUT
HV OUTPUT*
HV RETURN
DUAL OUTPUT (CENTER
TAP) OPTIONAL
5
N/A
6
7
8
ERROR ALARM
LOGIC INPUT: +5V +/-5%
DISABLE: TTL HIGH = OFF
*HV OUTPUT IS POSITIVE OR NEGATIVE DEPENDING ON THE MODEL.
WWW.XPPOWER.COM
4725V03
PAGE 4
FS SERIES
MECHANICAL SPECIFICATIONS – Without Smart Features (B Version)
MODEL
(
)
(
3
+OUT
(
1
)
+IN
)
5
CT
(
)
-OUT
4
Dimensions are in inches (metric equivalents are in parentheses)
Dimensional tolerances: .xx +/- 0.02 (0.51mm)
.xxx +/- 0.005 (0.127mm)
“B” option not offered on Dual Output (Center Tap) units.
Call sales for details.
PIN #
FUNCTION
PARAMETER
WEIGHT
VALUE
<1.6 OUNCES (45 GRAMS)
FS02 thru FS40
(+) INPUT
FS50 and FS60
(+) INPUT
1
2
3
4
VOLUME
1.27 CUBIC INCHES (20.8 CUBIC CENTIMETERS)
2.25L (57.15L) x 1.12W (28.5W) x 0.50H (12.70H)
(-) INPUT
(-) INPUT
DIMENSIONS
(+) OUTPUT
(-) OUTPUT
HV OUTPUT*
HV RETURN
*HV OUTPUT IS POSITIVE OR NEGATIVE DEPENDING ON THE MODEL.
WWW.XPPOWER.COM
4725V03
PAGE 5
FS SERIES
APPLICATION NOTES
Output Voltage vs. Input Voltage
140
120
100
80
60
40
20
0
No-Load
Full-Load
0
20
40
60
80
100
Input Voltage (%)
NOTE: The no-load curve may be as much as 200% x the full-load curve. Varies per model.
SMART FEATURES
The FS Series power supplies are provided with internal input over-voltage
and over-temperature protection. In the event the input voltage or internal
temperature exceeds a preset level, the power supply will be temporarily
disabled. A TTL-compatible, latching alarm signal transitions from low to
high to indicate an alarm condition has occurred. Sustained presence of an
input over-voltage may damage input components. The user should respond
to the alarm by removing the potentially damaging input.
Once all alarm conditions are cleared, the power supply will resume normal
operation. The alarm output signal will remain high to indicate an alarm
event has occurred. To clear the alarm output, the +5V logic input must be
toggled low for >250ms, then returned high.
The protection circuits are powered by the +5V logic input voltage and
draw <25mA.
WWW.XPPOWER.COM
4725V03
PAGE 6
FS SERIES–ACCESSORY
FS - VM ADAPTER BOARD
Dimensions are in inches (metric equivalents are in parentheses)
Dimensional tolerances: .xx +/- 0.02 (0.51mm)
.xxx +/- 0.005 (0.127mm)
PIN #
FUNCTION
(+) INPUT
PARAMETER
VALUE
<1 OUNCE (28.3 GRAMS)
1
WEIGHT
1.70 CUBIC INCHES (28 CUBIC CENTIMETERS)
2.30L (58.4L) x 0.44W (11.18W) x 1.35H (34.3H)
(-) INPUT
2
VOLUME
(+) OUTPUT
DIMENSIONS
3
4
(-) OUTPUT FOR NEG FS
(-) OUTPUT
This FS-VM adaptor board provides a convenient way to mount any FS
Series high voltage power supply DC to high voltage DC converter on its
side, minimizing the X-Y footprint to conserve board real estate.
HV RETURN
5
6
7
8
DUAL OUTPUT (CENTER TAP)
ERROR ALARM
LOGIC INPUT: +5V +/-5%
DISABLE
ORDERING INFORMATION:
Please note when ordering an FS-VM adaptor board the FS Series is not
included and must be ordered separately.
WWW.XPPOWER.COM
4725V03
PAGE 7
FS SERIES–ACCESSORY
FS - EB EVALUATION BOARD
HVOUT-
EMCO High Voltage Corporation
www.emcohighvoltage.com
VIN+
GND
HVOUT-
CT
VIN-
CT
VIN+
HVOUT+
ALARM+
ALARM-
HVOUT+
LOGIC+
LOGIC-
DIS+
DIS-
Model FS-EB
FS Series Evaluation & Prototype Board
Dimensions are in inches (metric equivalents are in parentheses)
Dimensional tolerances: .xx +/- 0.02 (0.51mm)
.xxx +/- 0.005 (0.127mm)
This FS-EB evaluation board provides a convenient package to use any FS
Series high voltage power supply without having to fit it onto a PC board. The
board provides for easy prototyping and evaluation.
PARAMETER
VALUE
<7 OUNCES (200 GRAMS)
WEIGHT
ORDERING INFORMATION:
Please note when ordering an FS-EB evaluation board the FS Series is not
included and must be ordered separately.
52.6 CUBIC INCHES (862 CUBIC CENTIMETERS)
6.00L (152.4L) x 6.00W (152.4W) x 1.56H (37.1H)
VOLUME
DIMENSIONS
WWW.XPPOWER.COM
4725V03
PAGE 8
FS SERIES
OPTION CODES
ORDERING
INFORMATION
ORDER CODE
AVAILABILITY
OUTPUT VOLTAGE
10 WATT
FS
ALL
DUAL OUTPUT (CENTER TAP) OPTION
CT
(MODELS FS02CT THRU FS40CT)
POLARITY
DESIGNATOR
POSITIVE OUTPUT
P
(MODELS FS50P THRU FS60P)
NEGATIVE
N
12
(MODELS FS50N THRU FS60N)
12V
ALL
15V
15
ALL
INPUT VOLTAGE
24V
24
ALL
ALL
28V
28
SHUTDOWN FEATURES INCLUDED
SHUTDOWN FEATURES NOT INCLUDED
STANDARD OPERATING TEMPERATURE
EXTENDED OPERATING TEMPERATURE
BLANK
B
ALL
SMART FEATURES
TEMPERATURE
(NOT OFFERED ON CT MODELS)
(-25°C TO +75°C (CASE)
(-55°C TO +85°C (CASE)
BLANK
T
For other input/output voltages, consult factory.
HOW TO ORDER
PART NUMBER SELECTOR:
Model Numberꢂ
FS ꢀꢁ ꢂ ꢃꢄꢅ
ꢌ
ꢆ
FS Model
Output Voltage ꢀSee Tableꢁ
Polarity Designator
Extended Operating Temperature
Smart ꢅeatures
Input Voltage
EXAMPLEꢂ FSꢀꢁꢂꢃꢄꢅꢆ ꢀFS-Seriesꢃ ꢀꢁ - Output Voltageꢃ ꢂ - Negativeꢃ ꢄꢅ - Input Voltageꢃ
ꢇꢈꢉꢊꢋ - ꢄith Smart ꢅeaturesꢃ ꢆ - Extended Operating Temperatureꢁ
* Notes:
XP EMCO reserves the right to make changes on
products and literature, including specifications, without
notice. XP EMCO standard product models are not
recommended for “copy-exact” applications or any other
application restricting product changes. “Copy-exact”
options are available. Please contact an XP EMCO
sales representative for more details.
1. At maximum rated output voltage.
2. Output voltage is load dependent. Under light or no-load conditions, reduce the input voltage so maximum rated output voltage is not exceeded.
3. Specifications after 1 hour warm-up, full load, at 25 C unless otherwise indicated.
4. Maximum output power is typically proportional to input voltage from 40% of input voltage and above.
5. Indefinite short circuit protection available on enhanced version only.
6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output.
7. Ripple specification for center-tapped units applies to the voltage between the positive and negative output terminals.
o
8. Models FS50 and FS60 do not have the arc protection feature.
WWW.XPPOWER.COM
4725V03
PAGE 9
相关型号:
©2020 ICPDF网 联系我们和版权申明