GSP500 [XPPOWER]
AC-DC Power Supplies;型号: | GSP500 |
厂家: | XP POWER LIMITED |
描述: | AC-DC Power Supplies |
文件: | 总8页 (文件大小:1146K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AC-DC Power Supplies
GSP500 Series
500 Watts
• Convection/Forced-cooled Ratings
• Universal 80 - 264 VAC Input
• IT & Medical Safety Approvals
• < 0.5 W Standby Power
• -40° C to +70° C Operation
• Remote On/Off
• 5 V/2 A Standby Output
• 3 Year Warranty
Dimensions:
The GSP500 has been designed to offer a full 500W of output power in a very small mechanical
footprint, whilst still providing peak power to 650W, a 5V standby output with 2Amps of current
capability and an input standby power draw of < 0.5W when the inhibit is activated.
GSP:
6.00 x 4.00 x 1.65” (152.4 x 101.6 x 41.9 mm)
(-EF): 6.71 x 4.00 x 1.65” (170.4 x 101.6 x 41.9 mm)
Approved for both IT and medical applications the series has output versions from 12V to 48V
and can be supplied as a U channel for system cooling or with optional very quiet integral fans
(-EF). These fans are intelligently controlled to provide the most optimised accoustic noise in the
system and further more the GSP500 can provide up to 180W without forced cooling, thus
allowing fans to be switched off during periods of lower system loading.
Models & Ratings
Output Current V1
Standby Supply
Max Output Power
Output
Voltage
(1,3)
Fan Supply
Model Number
(2)
Convection
Forced
Convection
Forced
5 V/2 A
5 V/2 A
5 V/2 A
Nom
Peak
12.0 VDC
24.0 VDC
48.0 VDC
15.00 A
7.50 A
3.75 A
42.0 A
21.0 A
10.5 A
5 V/1 A
5 V/1 A
5 V/1 A
12 V/0.3 A
12 V/0.3 A
12 V/0.3 A
500 W
500 W
500 W
650 W
650 W
650 W
GSP500PS12-EF
GSP500PS24-EF
GSP500PS48-EF
Notes
1. Remove suffix -EF (EndFan) for use with integral system cooling.
2. Peak power available for 100 ms maximum with a 10% duty cycle. The average power in a period should be equal or less than the normal power.
3. For optional current share version, add suffix ‘P’, e.g. GSP500PS24P or GSP500PS24P-EF.
Mechanical Details
6.71 (170.40)
LOGIC CONNECTOR
0.08 (2.00)
0.63 (15.90)
1
3
9 10
2 1
FAN CONNECTOR
LED
M4 SCREW-2X
TORQUE: 10.62lbs-in(1.2Nm) Max.
1.14 (28.90)
0.77 (19.45)
4.00 (101.60)
VOUT (-)
VOUT (+)
1.93 (48.94)
M3.5 SCREW 9.5mm CENTER
TORQUE: 10.62lbs-in(1.2Nm) Max.
N
L
0.82 (20.95)
7.00 (177.79)
5.65 (143.40)
0.02 (0.50)
A
1.65 (41.90)
AIRFLOW
DIRECTION
A
1.30 (33.00)
0.21 (5.39)
0.98 (24.90)
0.20 (5.00)
www.xppower.com
1
AC-DC Power Supplies
GSP500 Series
Input
Characteristic
Minimum
Typical
Maximum
264
Units
VAC
VAC
Hz
Notes & Conditions
Input Voltage - Operating
Input Voltage - Fault condition
Input Frequency
80
115/230
Derate output power <90 VAC. See fig 1.
5 second max
300
47
50/60
63
>
Power Factor
0.9
230 VAC, 100% load
115/230 VAC
Input Current - Full Load
Inrush Current
5.0/2.4
60
A
A
0.5
All models, when inhibit activated
GSP500PS12 - 115 VAC
3.0
1.3
GSP500PS12 - 230 VAC
No Load Input Power
3.0
W
GSP500PS24 - 115 VAC
1.2
GSP500PS24 - 230 VAC
4.8
GSP500PS48 - 115 VAC
2.3
GSP500PS48 - 230 VAC
Earth Leakage Current
Input Protection
80/220
250
µA
115/230 VAC/50 Hz Typ., 264 VAC/60 Hz Max.
F16 A/250 V internal fuse in both lines
Output
Characteristic
Minimum
Typical
Maximuµm
Units
VDC
%
Notes & Conditions
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
12
48
1
See Models and Ratings table
50% load, 115/230 VAC
+1,-3
%
0
A
0.5
2
s
115/230 VAC full load from input AC turn on
20
ms
%
Drift
0.2
0.5
1.0
After 20 min warm up
90-264 VAC
Line Regulation
Load Regulation
0.01
0.2
%
%
0-100% load
Recovery within 1% in less than 500 µs
for a 50-75% and 75-50% load step
Transient Response
4
%
Over/Undershoot
0
%
Ripple & Noise
0.5
1.5
140
150
% pk-pk
%
20 MHz bandwidth
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
115
110
Vnom DC. Output 1, recycle input to reset
See fig. 2. Trip and Restart
Shutdown & auto recovery
% I nom
0.05
%/˚C
Shutdown & auto recovery
Input Voltage Derating Curve
Output Overload Characteristic
Figure 1
Figure 2
GSP500PS12 example (others similar).
12
Trip & Restart
550
500
450
400
350
300
10
8
6
4
2
0
0
42
44
46
48
50
52
54
56
58
60
80
85
90
300
264
Output Load (A)
Input Voltage (VAC)
www.xppower.com
2
AC-DC Power Supplies
GSP500 Series
General
Characteristic
Minimum
Typical
Maximum
Units
%
Notes & Conditions
230 VAC Full load (see fig.3-5)
2 x MOPP
Efficiency
90
4000
1500
500
VAC
VAC
VDC
Isolation: Input to Output
Input to Ground
1 x MOPP
Output to Ground
65
90
PFC Converter
Switching Frequency
50
200
kHz
Main Converter
Standby Converter
100
3
Power Density
12.6
W/in
Mean Time Between Failure
216
1.87 (0.85)
1.98 (0.90)
kHrs
MIL-HDBK-217F, Notice 2 +25 °C GB
GSP500PSxx models
GSP500PSxx-EF models
Weight
lb (kg)
Efficiency Vs Load
100 %
Figure 3
12 V Models
80 %
60 %
40 %
20 %
0 %
115Vac
230Vac
0%
20%
40%
60%
LOAD
80%
100%
Figure 4
24 V Models
100 %
80 %
60 %
40 %
20 %
0 %
115Vac
230Vac
0%
20%
40%
60%
80%
100%
LOAD
100 %
80 %
60 %
40 %
20 %
0 %
Figure 5
48 V Models
115Vac
230Vac
0%
20%
40%
60%
80%
100%
LOAD
www.xppower.com
3
AC-DC Power Supplies
GSP500 Series
Signals & Controls
Characteristic
Notes & Conditions
Open collector referenced to negative sense, transistor normally on when power is good (see fig. 5); power is considered good when
PFC bulk capacitor voltage is normal. PF: Provides ≥ 5 ms warning of loss of output from power failure.
Power Fail (PF)
Uncommited isolated optocoupler diode, powered diode inhibits both V1 and fan supply (see fig. 6). During inhibit the standby
supply and current should be limited to 1 A for thermal reasons.
Inhibit
Output Good
LED Indicator
Fan Speed Control
GSP500PSxx-EF Models
The fan speed is set to one of 4 states (high, mid, low or off) dependant on the internal power supply ambient temperature,
input voltage and output load at any given time.
Standby Supply
Remote Sense
5V/2A Isolated supply present when AC applied.
Compensates for 0.5 V total voltage drop.
Optional, on ‘P’ version only. Connecting pins 5 or 6 on one unit to pins 5 or 6 on another like voltage unit will force the current to be
shared within 10% between the two outputs. Up to three units can share current. (see fig. 7)
Current Share
Power Fail (PF)
Remote On/Off (Inhibit)
Current Share
Figure 5
Figure 6
Figure 7
INHIBIT HI
INHIBIT LOW
GSP500PSXX
V1 Output
GSP500PSXX (2)
GSP500PSXX (3)
V1 Output
1.5K
POWER SUPPLY
POWER SUPPLY
1.5K
POWER SUPPLY
5 V Standby
V1 Output
5 V Standby
Pin 9
5 V Standby
Pin 9
-
+
-
+
-
+
Pin 9
Typical 2 mA
(min requirement 500 µA)
Current
Share
Current
Share
10K
100 R
250 µA
100 R
Pin 9
Inhibit Hi
Pin 7
Typical 500 µA
PF Collector
(max allowable 600 µA)
Pin 3
Inhibit Hi
Pin 7
Transistor On (<0.8 V):
POWER OK
Transistor Off (>3.5 V):
POWER NOT OK
PF Emitter Pin 2
(-sense)
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
-
+
Chassis J301 Logic Connector
J301 Logic Connector
Chassis J301 Logic Connector
Signal High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Load
Environmental
Characteristic
Operating Temperature
Storage Temperature
Cooling
Humidity
Operating Altitude
Minimum
Typical
Maximum
+70
+85
Units
°C
°C
CFM
%RH
m
Notes & Conditions
Start up at -40 °C. See derating curve, fig. 8
-20
-40
12
5
GSP500PSxx models
Non-condensing
95
5000
59.9
52.2
36.6
Lw db(A)
Lw db(A)
Lw db(A)
Full Speed
Mid Speed
Low Speed
Accoustic Fan Noise
GSP500PSxx-EF Models
3 x 30g shocks in each plane, total 18 shocks. 30g =
11ms (+/-0.5msec), half sine. Conforms to EN60068-2-27
& EN60068-2-47
Shock
Single axis 10 - 500 Hz at 2g sweep and endurance at
resonance in all 3 planes. Conforms to EN60068-2-6
Vibration
500
Thermal Derating Curve
Figure 8
Forced-cooled
250
180
Convection-cooled
0
90
0
-40
-20
+50
+70
Ambient Temperature (ºC)
www.xppower.com
4
AC-DC Power Supplies
GSP500 Series
EMC: Emissions
Phenomenon
Standard
Test Level
Class B
Notes & Conditions
Conducted
EN55011/22
EN55011/22
EN61000-3-3
Class A
Radiated
With 1 Turn Wurth 742 712 22 core or similar on output
lead
Class B
Harmonic Fluctuations
EMC: Immunity
Phenomenon
Standard
Test Level
Criteria
Notes & Conditions
Low Voltage PSU EMC
EN61204-3
High severity level
as below
Class A
All models
> 50 W
Harmonic Current
EN61000-3-2
Class C
Radiated
EFT
EN61000-4-3
EN61000-4-4
3
3
A
A
Surges
EN61000-4-5
EN61000-4-6
Installation class 3
A
Conducted
3
A
A
A
B
A
A
B
A
A
A
B
A
A
A
B
Dip >95% (0 VAC), 8.3ms
Dip 30% (70 VAC), 416ms
Dip >95% (0 VAC), 4160ms
Dip >95% (0 VAC), 10.0ms
Dip 30% (168 VAC), 500ms
Dip >95% (0 VAC), 5000ms
Dip >95% (0 VAC), 10.0ms
Dip 60% (40 VAC), 100ms
Dip 30% (70 VAC), 500ms
Dip >95% (0 VAC), 5000ms
Dip >95% (0 VAC), 10.0ms
Dip 60% (96 VAC), 100ms
Dip 30% (168 VAC), 500ms
Dip >95% (0 VAC), 5000ms
EN55024
(100 VAC)
EN55024
(240 VAC)
Dips and Interruptions
Derate Output Power to 250 W
EN60601-1-2
(100 VAC)
EN60601-1-2
(240 VAC)
Safety Approvals
Safety Agency
Safety Standard
Notes & Conditions
Information Technology
Medical
IEC60950-1:2005 Ed 2
CB Report
UL
IEC60601-1 Ed 3 Including Risk Management
UL60950-1 (2007), CSA 22.2 No.60950-1-1:08
Information Technology
ANSI/AAMI ES60601-1:2005 & CSA C22.2, No.60601-1:08 Medical
EN60950-1:2006
EN60601-1/A12:2006
LVD & RoHS
Information Technology
TUV
Medical
CE
Equipment Protection Class
Class I
See safety agency conditions of acceptibility for details
Means of Protection
Category
Primary to Secondary
Primary to Earth
2 x MOPP (Means of Patient Protection)
1 x MOPP (Means of Patient Protection)
IEC60601-1 Ed 3
www.xppower.com
55
AC-DC Power Supplies
GSP500 Series
Mechanical Details
GSP500-EF
1.30 (33.00) X 2
A
A
0.20 (5.00)
5.65 (143.40)
6.71 (170.40)
LOGIC CONNECTOR
0.08 (2.00)
0.63 (15.90)
1
3
9 10
2 1
FAN CONNECTOR
LED
M4 SCREW-2X
TORQUE: 10.62lbs-in(1.2Nm) Max.
1.14 (28.90)
0.77 (19.45)
4.00 (101.60)
VOUT (-)
VOUT (+)
1.93 (48.94)
M3.5 SCREW 9.5mm CENTER
TORQUE: 10.62lbs-in(1.2Nm) Max.
N
L
0.82 (20.95)
7.00 (177.79)
5.65 (143.40)
0.02 (0.50)
DETAIL A
Mounting Hole
8 PLCS M3 X 0.5
A
1.65 (41.90)
AIRFLOW
A
DIRECTION
0.15 (3.8) MAX Penetration
Torque: 5 lb/in (0.6 Nm)
1.30 (33.00)
0.21 (5.39)
0.98 (24.90)
0.20 (5.00)
6.00 (152.40)
5.41 (137.40) X 2
Logic Connector(3)
for standard versions
JST B10B-PHDSS
A
A
Pin
1
2
3
4
5
6
7
Function
+Sense
-Sense
4.00 (101.60)
2.36 (60.00)
C
L
Power Fail
No Connection
No Connection
No Connection
+Inhibit
A
A
8
9
10
-Inhibit
+5V Standby
-5V Standby
0.39 (10.00)X2
(3)
(3)
Fan Connector
Logic Connector
S3B-PH-KL(LF)
For Current Share Versions -P
JST B10B-PHDSS
Pin
1
2
Function
+12 V
N/C
Pin
1
2
Function
+Sense
-Sense
3
GND
3
4
5
6
Power Fail
No Connection
Current Share
Current Share
+Inhibit
Notes
7
1. All dimensions in inches (mm).
2. Tolerance .xx = 0.02 (0.50); .xxx = 0.01 (0.25)
3. Fan connector mates with JST housing PHR-3 and SPH-002T-P0.5S crimp
terminals or equivalent. Logic connector J301 mates with JST housing
PHDR-10VS and SPHD-001T-P0.5 crimp terminals.
8
9
10
-Inhibit
+5V Standby
-5V Standby
www.xppower.com
6
AC-DC Power Supplies
GSP500 Series
Mechanical Details
GSP500
1.30 (33.00) X2
A
A
0.20 (5.00)
5.65 (143.40)
6.00 (152.40)
LOGIC CONNECTOR
0.63 (15.9) X2
1
3
9 10
2 1
FAN CONNECTOR
LED
M4 SCREW-2X
TORQUE: 10.62lbs-in(1.2Nm) Max.
1.14 (28.90)
0.77 (19.45)
VOUT (-)
VOUT (+)
4.00 (101.60)
N
L
5.65 (143.40)
0.02 (0.50)
DETAIL A
A
1.65 (41.90)
Mounting Hole
AIRFLOW
A
8 PLCS M3 X 0.5
0.15[3.8] MAX Penetration
Torque: 5 lb/in (0.6 Nm)
DIRECTION
1.30 (33.00)
0.21 (33.00)
at 12 CFM
0.98 (24.90)
0.20 (5.00)
6.00 (152.40)
Logic Connector(3)
5.41 (137.40)X2
for standard versions
JST B10B-PHDSS
A
A
Pin
1
2
Function
+Sense
-Sense
4.00 (101.60)
3
4
5
6
Power Fail
No Connection
No Connection
No Connection
+Inhibit
2.36 (60.00)
C
L
A
A
7
8
9
10
-Inhibit
+5V Standby
-5V Standby
0.39 (10.00)X2
(3)
Logic Connector
(3)
Fan Connector
For Current Share Versions -P
JST B10B-PHDSS
S3B-PH-KL(LF)
Pin
1
2
Function
+12 V
N/C
Pin
1
2
Function
+Sense
-Sense
3
GND
3
4
5
6
Power Fail
No Connection
Current Share
Current Share
+Inhibit
Notes
1. All dimensions in inches (mm).
2. Tolerance .xx = 0.02 (0.50); .xxx = 0.01 (0.25)
7
8
9
10
-Inhibit
+5V Standby
-5V Standby
3. Fan connector mates with JST housing PHR-3 and SPH-002T-P0.5S crimp
terminals or equivalent. Logic connector J301 mates with JST housing
PHDR-10VS and SPHD-001T-P0.5 crimp terminals.
www.xppower.com
77
AC-DC Power Supplies
GSP500 Series
Thermal Considerations - GSP500PSxx Models Only
In order to ensure safe operation of the PSU in the end-use equipment, the temperature of the components listed in the table below must
not be exceeded. Temperature should be monitored using K type thermocouples placed on the hottest part of the component
(out of direct air flow). See below for component locations.
Temperature Measurements (At Ambient 50 °C)
Component
T1 Coil
Max Temperature °C
120 °C
L3 Coil
120 °C
Q7 Body
Q102 Body
C20
120 °C
120 °C
105 °C
C102
105 °C
--
Service Life
The estimated service life of the GSP500PSxx Series is determined by the cooling arrangements and load conditions experienced in the end
application. Due to the uncertain nature of the end application this estimated service life is based on the actual measured temperature of a
key capacitors with in the product when installed by the end application. The worst case of the two figures should be taken as the indicative
service life in 24/7 operation.
The graph below expresses the estimated lifetime of a given component temperature and assumes continuous operation at this
temperature.
Estimated Service Life vs Component Temperature
70000
Q102
60000
50000
40000
30000
C20
20000
10000
C102
Q7
0
105
95
85
75
65
55
C20 Temperature (°C)
T1
350000
300000
250000
200000
150000
100000
50000
L3
0
105
95
85
75
65
55
C102Temperature (°C)
www.xppower.com
12 April 16
相关型号:
©2020 ICPDF网 联系我们和版权申明