225908125649 [YAGEO]
Feed Through Capacitor, 1 Function(s), 63V, EIA STD PACKAGE SIZE 1206;型号: | 225908125649 |
厂家: | YAGEO CORPORATION |
描述: | Feed Through Capacitor, 1 Function(s), 63V, EIA STD PACKAGE SIZE 1206 |
文件: | 总12页 (文件大小:505K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DISCRETE CERAMICS
DATA SHEET
X2Y® Series
Surface-mount ceramic
multilayer filter capacitors
Preliminary specification
2001 Sep 25 Rev.5
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
X2Y EMI FILTERS
QUICK REFERENCE DATA
DESCRIPTION
Phycomp introduces a new EMI filter
component, using X2Y technology
which provides simultaneous
line-to-line and line-to-ground filtering
via a matched or balanced pair of
capacitors.
VALUE
Materials
NP0, X7R, (Y5V, development)
Rated voltage UR (DC)
6.3 V, 10 V, 16 V, 25 V, 50 V and 100 V
(IEC)
Capacitance range (Y-capacitor):
0603
33 pF to 47 nF
X2Y filters solve electro-magnetic
interference problems and safeguard
signal integrity.
0805
33 pF to 470 nF
100 nF to 2200 nF
220 nF to 4700 nF
470 nF
1206
X2Y filters consist of one X capacitor
and two Y capacitors in one ceramic
package.
1210
1812
Tolerance on capacitance:
Test voltage (DC) for 1 minute:
±5%; ±10%; ±20%, −20/+80%
ADVANTAGES
6.3 V, 10 V, 16 V, 25 V, 50 V
and 100 V
2.5 × UR
• Replaces 2 - 7 capacitors and
inductors with one device.
Sectional specifications
Detailed specification
IEC 60384-10, second edition 1989-04
based on IEC - 60384-10-1
• Matched capacitance line to ground
on both lines.
Climatic category (IEC 60068)
NP0 and X7R 55/125/56,
Y5V 25/085/21
• Provides line to line capacitance in
the same device.
• Extreme low inductance due to
cancellation effect.
• Differential and common mode
noise attenuation.
• Reduces board area required for
filtering.
• Effects of temperature variation on
matching eliminated.
• Effect of aging equal on both lines.
APPLICATIONS
• EMI suppression
• Decoupling
• Common mode noise suppression
• Trans voltage suppression (Surge)
• Filtering
• Balanced lines
• Twisted pairs
Fig.1 X2Y multilayer filter capacitor
2001 Sep 25 Rev.5
2
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
MECHANICAL DATA
For dimensions see Table .
Fig.2 Component outline.
Physical dimensions
Capacitor dimensions
T
A
C
CASE SIZE
L
W
MIN.
MAX.
MIN.
MAX.
Dimensions in millimetres
0603
0805
1206
1210
1812
1.6 ±0.15
2.0 ±0.15
3.2 ±0.20
3.2 ±0.20
4.5 ±0.20
0.8 ±0.10
1.25 ±0.15
1.6 ±0.20
2.5 ±0.20
3.2 ±0.20
0.50
0.70
0.25
0.50
0.55
0.65
0.65
0.65
0.40 ±0.2
0.60 ±0.2
1.20 ±0.3
1.20 ±0.3
1.30 ±0.3
0.75
0.80
1.10
1.10
0.95
1.35
1.70
1.70
0.25
0.25
0.25
0.25
Dimensions in inches
0603
0805
1206
1210
1812
0.063 ±0.006 0.032 ±0.005 0.019
0.079 ±0.006 0.049 ±0.006 0.030
0.126 ±0.008 0.063 ±0.008 0.031
0.126 ±0.008 0.098 ±0.008 0.043
0.177 ±0.008 0.126 ±0.008 0.043
0.028
0.037
0.053
0.067
0.067
0.010
0.010
0.010
0.010
0.010
0.02
0.015 ±0.008
0.023 ±0.008
0.047 ±0.012
0.047 ±0.012
0.051 ±0.012
0.022
0.026
0.026
0.026
2001 Sep 25 Rev.5
3
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
ELECTRICAL CHARACTERISTICS FOR NP0
Class 1 capacitors; NP0 dielectric; NiSn terminations
Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1 °C, an atmospheric pressure of
86 to 106 kPa, and a relative humidity of 63 to 67%.
DESCRIPTION
Rated voltage UR (DC)
VALUE
50 V/63 V and 100 V
33 pF to 100 pF
±10%; ±5%
Capacitance range (E12 series)
Tolerance on capacitance after 1000 hours:
Tan δ
≤10 * E-4
Insulation resistance after 1 minute at UR (DC)
Temperature coefficient
Rins > 100 GΩ
(0 ±30) × 10−6/K
Resistance to soldering heat
260 °C; 10 seconds
Selection chart for NP0
Y-Capacitor
X-Capacitor
U RATED
SIZE
0603
CTC ORDERING CODE (1), (2)
CAP
U RATED
CAP
THICKNESS
X 0603 KR NP0 0BN 330
X 0603 KR NP0 0BN 101
X 0805 KR NP0 0BN 330
X 0805 KR NP0 0BN 101
33 pF
100 pF
33 pF
100 V
100 V
100 V
100 V
17 pF
50 pF
17 pF
50 pF
200 V
200 V
200 V
200 V
0.60 mm
0.60 mm
0.85 mm
0.85 mm
0603
0805
0805
100 pF
Notes
1. Ordering codes for preferred versions. For other packing and tolerance see section Ordering Code.
2. For 12NC ordering codes see conversion table on page 7.
Thickness classification and packing quantities for NP0
QUANTITY PER REEL
8 mm TAPE WIDTH
THICKNESS
CLASSIFICATION
(mm)
180 mm; 7"
330 mm; 13"
PAPER
BLISTER
PAPER
BLISTER
0.6 ±0.1
4000
4000
−
−
20000
15000
−
−
0.85 ±0.1
2001 Sep 25 Rev.5
4
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
ELECTRICAL CHARACTERISTICS FOR X7R
Class 2 capacitors; X7R dielectric; NiSn terminations
Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1 °C, an atmospheric pressure of
86 to 106 kPa, and a relative humidity of 63 to 67%.
DESCRIPTION
Rated voltage UR (DC)
VALUE
10 V, 16 V, 25 V, 50 V/63 V and 100 V
Capacitance range (E12 series)
Tolerance on capacitance after 1000 hours:
Tan δ; note 1:
2.7 nF to 1 µF
±10%
≤2.5%
Insulation resistance after 1 minute at UR (DC)
Rins × C > 500 seconds
Maximum capacitance change as a function of temperature ±15%
Ageing
typical 1% per time decade
260 °C; 10 seconds
Resistance to soldering heat
Notes
1. Measured at 20 °C, 1 V and 1 kHz, using a four-gauge method.
Selection chart for X7R
Y-Capacitor
X-Capacitor
U RATED
SIZE
0603
CTC ORDERING CODE (1), (2)
CAP
U RATED
CAP
THICKNESS
X 0603 KR X7R 8BB 103
X 0603 KR X7R 6BB 104
X 0805 KR X7R 9BB 103
X 0805 KR X7R 7BB 104
X 1206 KK X7R 9BB 104
X 1206 KK X7R 8BB 184
X 1206 KK X7R 7BB 164
X 1210 KK X7R 9BB 224
X 1210 KK X7R 8BB 564
X 1210 KK X7R 7BB 105
X 1812 KK X7R 9BB 474
10 nF
100 nF
10 nF
25 V
10 V
63 V
16 V
63 V
25 V
16 V
63 V
25 V
16 V
63 V
5 nF
50 nF
5 nF
50 V
16 V
0.60 mm
0.60 mm
0.85 mm
0.85 mm
1.20 mm
1.20 mm
1.20 mm
1.60 mm
1.60 mm
1.60 mm
1.60 mm
0603
0805
0805
1206
1206
1206
1210
1210
1210
1812
100 V
25 V
100 nF
100 nF
180 nF
470 nF
220 nF
560 nF
1000 nF
470 nF
50 nF
50 nF
90 nF
235 nF
110 nF
280 nF
500 nF
235 nF
100 V
50 V
25 V
100 V
50 V
25 V
100 V
Notes
1. Ordering codes for preferred versions. For other packing and tolerance see section Ordering Code.
2. For 12NC ordering codes see conversion table on page 7.
Thickness classification and packing quantities for X7R
QUANTITY PER REEL
12 mm TAPE
8 mm TAPE WIDTH
THICKNESS
WIDTH
CLASSIFICATION
180 mm; 7"
330 mm; 13"
180 mm; 7"
1812
(mm)
0603 - 1210
BLISTER PAPER
PAPER
BLISTER
BLISTER
0.6 ±0.1
0.85 ±0.1
1.2 ±0.15
1.6 ±0.15
4000
4000
−
−
20000
−
−
−
−
−
15000
2500
2500
−
−
10000
7000
−
−
1200
2001 Sep 25 Rev.5
5
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
ELECTRICAL CHARACTERISTICS FOR Y5V
Class 2 capacitors;Y5V dielectric; NiSn terminations
Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1 °C, an atmospheric pressure of
86 to 106 kPa, and a relative humidity of 63 to 67%.
DESCRIPTION
Rated voltage UR (DC)
VALUE
16 V
Capacitance range (E12 series)
Tolerance on capacitance after 1000 hours:
Tan δ; note 1:
100 nF to 4.7 µF
−20/+80%
≤12.5%
Insulation resistance after 1 minute at UR (DC)
Rins × C > 500 seconds
Maximum capacitance change as a function of temperature +30% to −80%
Ageing
typical 7% per time decade
260 °C; 10 seconds
Resistance to soldering heat
Notes
1. Measured at 20 °C, 1 V and 1 kHz, using a four-gauge method.
Selection chart for Y5V
Y-Capacitor
X-Capacitor
SIZE
0603
CTC ORDERING CODE (1), (2)
CAP
U RATED
CAP
U RATED
THICKNESS
X 0603 ZR Y5V 7BB 224
X 0805 ZR Y5V 7BB 474
X 1206 ZK Y5V 7BB 225
X 1210 ZK Y5V 7BB 475
220 nF
470 nF
16 V
16 V
16 V
16 V
110 nF
235 nF
25 V
25 V
25 V
25 V
0.60 mm
0.85 mm
1.20 mm
1.60 mm
0805
1206
1210
2200 nF
4700 nF
1100 nF
2350 nF
Notes
1. Ordering codes for preferred versions. For other packing and tolerance see section Ordering Code.
2. For 12NC ordering codes see conversion table on page 7.
Thickness classification and packing quantities for Y5V
QUANTITY PER REEL
12 mm TAPE
8 mm TAPE WIDTH
WIDTH
THICKNESS
CLASSIFICATION
180 mm; 7"
330 mm; 13"
180 mm; 7"
1812
(mm)
0603 - 1210
BLISTER PAPER
PAPER
BLISTER
BLISTER
0.6 ±0.1
0.85 ±0.1
1.2 ±0.15
1.6 ±0.15
4000
4000
−
−
20000
−
−
−
−
−
15000
2500
2500
−
−
10000
7000
−
−
1200
2001 Sep 25 Rev.5
6
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
ORDERING INFORMATION
Components may be ordered by using either a simple 15-digit clear text code or Phycomp’s unique 12NC.
Table 1 Conversion table: Clear text code - 12NC code
CAPACITOR
VALUE
CAPACITOR
TOLERANCE
U RATED
TC
SIZE
CTC ORDERING CODE
12NC ORDERING CODE
Y-CAP
Y-CAP
Y-CAP
NP0
NP0
NP0
NP0
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Y5V
Y5V
Y5V
Y5V
0603
0603
0805
0805
0603
0603
0805
0805
1206
1206
1206
1210
1210
1210
1812
0603
0805
1206
1210
33 pF
100 pF
33 pF
10%
10%
100 V
100 V
100 V
100 V
25 V
10 V
63 V
16 V
63 V
25 V
16 V
63 V
25 V
16 V
63 V
16 V
16 V
16 V
16 V
X 0603 KR NP0 0BN 330
X 0603 KR NP0 0BN 101
X 0805 KR NP0 0BN 330
X 0805 KR NP0 0BN 101
X 0603 KR X7R 8BB 103
X 0603 KR X7R 6BB 104
X 0805 KR X7R 9BB 103
X 0805 KR X7R 7BB 104
X 1206 KK X7R 9BB 104
X 1206 KK X7R 8BB 184
X 1206 KK X7R 7BB 474
X 1210 KK X7R 9BB 224
X 1210 KK X7R 8BB 564
X 1210 KK X7R 7BB 105
X 1812 KK X7R 9BB 474
X 0603 ZR Y5V 7BB 224
X 0805 ZR Y5V 7BB 474
X 1206 ZK Y5V 7BB 225
X 1210 ZK Y5V 7BB 475
2259 096 11629
2259 096 11636
2259 090 11629
2259 090 11636
2259 076 15636
2259 056 15649
2259 080 15636
2259 060 15649
2259 081 25649
2259 071 25653
2259 061 25658
2259 082 25654
2259 072 25659
2259 062 25663
2259 084 25658
2259 066 19854
2259 060 19858
2259 061 19867
2259 062 19872
10%
100 pF
10 nF
10%
10%
100 nF
10 nF
10%
10%
100 nF
100 nF
180 nF
470 nF
220 nF
560 nF
1000 nF
470 nF
220 nF
470 nF
2.2 µF
4.7 µF
10%
10%
10%
10%
10%
10%
10%
10%
+20%, −80%
+20%, −80%
+20%, −80%
+20%, −80%
Ordering code: Clear Text Code
X2Y products are coded according to the properties of the Y-capacitors.
2001 Sep 25 Rev.5
7
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
SOLDERING
Table 2 Reflow soldering
PLACEMENT
ACCURACY
(mm)
FOOTPRINT DIMENSIONS (mm)
SIZE
A
B
C
D
E
F
0603
0805
1206
1210
1812
2.0
2.5
4.0
4.0
5.6
0.7
1.1
1.4
2.2
2.8
0.5
0.6
1.0
1.0
1.2
0.35
0.5
1.2
1.8
2.4
3.7
4.8
0.3
0.35
0.4
±0.20
±0.20
±0.25
±0.25
±0.25
1.15
1.15
1.15
0.4
1.0
Table 3 Wave soldering
PLACEMENT
ACCURACY
(mm)
FOOTPRINT DIMENSIONS (mm)
SIZE
A
B
C
D
E
F
0603
0805
1206
2.4
3.0
4.8
0.7
1.1
1.4
0.7
0.85
1.4
0.35
0.5
1.2
1.8
2.4
0.3
0.35
0.4
±0.20
±0.20
±0.25
1.15
Fig. 4 Footprint dimensions
2001 Sep 25 Rev.5
8
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
TESTS AND REQUIREMENTS
Table 4 Test procedures and requirements
IEC
IEC
60384-10/
CECC 32 100
CLAUSE
60068-2
TEST
METHOD
TEST
PROCEDURE
REQUIREMENTS
4.4
mounting
the capacitors may be mounted
on printed-circuit boards or
ceramic substrates by applying
wave soldering or reflow
soldering
no visible damage
4.5
visual inspection and any applicable method using
in accordance with specification
within specified tolerance
dimension check
×10 magnification
4.6.1
capacitance
Class 1 ≤ 1000pF f=1MHz.
Class 1 > 1000pF f=1kHz.
Class 2 f=1 kHz 1Vrms at 20 °C
Class 1 ≤ 1000pF f=1MHz.
4.6.2
tan δ
in accordance with specification
Class 1 > 1000pF f=1kHz.
Class 2 f=1 kHz 1Vrms at 20 °C
4.6.3
4.6.4
4.7
insulation resistance at UR (DC) for 1 minute
in accordance with specification
no breakdown or flashover
voltage proof
2.5 × UR for 1 minute
temperature
characteristic
between minimum and
maximum temperature
in accordance with specification
4.8
21
21
adhesion
a force of 5 N applied for 10 s to no visible damage
the line joining the terminations
and in a plane parallel to the
substrate
4.9
bond strength of
plating on end face
mounted in accordance with
CECC 32 100, paragraph 4.4
no visible damage
conditions: bending
1 mm at a rate of 1 mm/s,
radius jig 340 mm
∆C/C: ≤10%
4.10
Tb
resistance to
soldering heat
precondition:
the terminations shall be well
tinned after recovery
120 to 150 °C for 1 minute;
260 ±5 °C for 10 ±0.5 s
in a static solder bath
∆C/C: ≤10%
tan δ: original specification
R
ins: original specification
resistance to
leaching
260 ±5 °C for 30 ±1 s
in a static solder bath
using visual enlargement of
×10, dissolution of the
terminations shall not
exceed 10%
2001 Sep 25 Rev.5
9
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
IEC
IEC
60384-10/
CECC 32 100
CLAUSE
60068-2
TEST
METHOD
TEST
PROCEDURE
REQUIREMENTS
4.11
4.12
4.14
Ta
solderability
zero hour test, and test after
storage (20 to 24 months) in
original packing in normal
atmosphere;
unmounted chips completely
immersed for 2 ±0.5 s in a solder
bath at 235 ±5 °C
the terminations shall be well
tinned
Na
Ca
rapid change of
temperature
preconditioning, class 2 only :
NP0/X7R :-55 to +125°C; 5
cycles
no visible damage after
48 hours recovery:
∆C/C:
Y5V:-25 to +85°C; 5 cycles
class 1, NP0: within ±1%
class 2, X7R:within ±15%
class 2, Y5V: within ±20%
damp heat,
with UR load
initialization:
48 hours after UR
no visual damage
at 40 °C for 1 hour
after recovery:
(for initial value measurement);
500 ±12 hours at 40 °C;
90 to 95% RH; UR applied
class 1: 1 to 2 hours
class 2: 24 hours
∆C/C:
class 1 :within ±2% or 1pF
whichever is greater
class 2, X7R:within
±15%,±20%.
class 2,Y5V: within +30/-40%
tan δ
class 1: ≤2 x specified value
class 2:X7R ≤7%
class 2:Y5V : ≤15%
Rins
:
class 1: 2500 MΩ or
RiCR ≥ 25 s, whichever is less
: 1000 MΩ or
class 2
RiCR ≥ 25 s, whichever is less
2001 Sep 25 Rev.5
10
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
IEC
IEC
60384-10/
CECC 32 100
CLAUSE
60068-2
TEST
METHOD
TEST
PROCEDURE
REQUIREMENTS
4.15
endurance
preconditioning, class 2 only:
1000 hours at upper category
temperature at:
no visible damage after
24 hours recovery:
∆C/C:
1.5 × UR
class 1 :within ±2% or 1pF
whichever is greater
class 2, X7R:within ±20%.
class 2,Y5V: within+30/-40%t
tan δ
class 1: ≤2 x specified value
class 2:X7R ≤7%
class 2:Y5V : 15%
Rins
:
class 1: 4000 MΩ or
RiCR ≥ 25 s, whichever is less
: 2000 MΩ or
class 2
RiCR ≥ 25 s, whichever is less
2001 Sep 25 Rev.5
11
www.phycomp-components.com
Phycomp
Preliminary specification
Surface-mount ceramic
multilayer filter capacitors
X2Y® Series
REVISION HISTORY
Revision Date
Change
Description
Notification
Rev.5
2001 Sep 25
–
- published on web
2001 Sep 25 Rev.5
12
www.phycomp-components.com
相关型号:
©2020 ICPDF网 联系我们和版权申明