232270675761
更新时间:2024-09-18 16:08:44
品牌:YAGEO
描述:Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 576ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT
232270675761 概述
Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 576ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT 固定电阻器
232270675761 规格参数
是否Rohs认证: | 符合 | 生命周期: | Obsolete |
包装说明: | SMT, 0402 | Reach Compliance Code: | compliant |
ECCN代码: | EAR99 | HTS代码: | 8533.21.00.30 |
风险等级: | 5.21 | 其他特性: | LASER TRIMMABLE |
构造: | Chip | JESD-609代码: | e3 |
安装特点: | SURFACE MOUNT | 端子数量: | 2 |
最高工作温度: | 155 °C | 最低工作温度: | -55 °C |
封装高度: | 0.35 mm | 封装长度: | 1 mm |
封装形状: | RECTANGULAR PACKAGE | 封装形式: | SMT |
封装宽度: | 0.5 mm | 包装方法: | TR, PAPER, 7 INCH |
额定功率耗散 (P): | 0.0625 W | 额定温度: | 70 °C |
电阻: | 576 Ω | 电阻器类型: | FIXED RESISTOR |
系列: | 2322706 | 尺寸代码: | 0402 |
子类别: | Fixed Resistors | 表面贴装: | YES |
技术: | METAL GLAZE/THICK FILM | 温度系数: | 100 ppm/°C |
端子面层: | Matte Tin (Sn) - with Nickel (Ni) barrier | 端子形状: | WRAPAROUND |
容差: | 1% | 工作电压: | 50 V |
Base Number Matches: | 1 |
232270675761 数据手册
通过下载232270675761数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载GENERAL PURPOSE CHIP RESISTORS
RC0402
5%, 1%
RoHS compliant
Product specification
2
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC0402 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RC0402 X R - XX XXXX L
APPLICATIONS
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
ꢀ All general purpose application
( )
1 TOLERANCE
F = ±1%
FEATURES
J = ±5% (for Jumper ordering, use code of J)
ꢀ Halogen Free Epoxy
( )
2 PACKAGING TYPE
ꢀ RoHS compliant
R = Paper / PE taping reel
- Products with lead free
terminations meet RoHS
requirements
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
- Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
( )
4 TAPING REEL
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
ꢀ Reducing environmentally
hazardous wastes
ꢀ High component and equipment
( )
5 RESISTANCE VALUE
reliability
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
ꢀ Saving of PCB space
ꢀ None forbidden-materials used
Detailed resistance rules show in table of “Resistance rule of global part number”.
in products/production
(6) DEFAULT CODE
Letter L is system default code for order only (Note)
Resistance rule of global part
number
ORDERING EXAMPLE
The ordering code of a RC0402
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC0402FR-0756RL.
Resistance code rule
Example
D1
0R
D1 = Dummy
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
NOTE
XRXX
(1 to 9.76 Ω)
1. All our RSMD products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
2. On customized label, "LFP" or specific
symbol can be printed
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
1K = 1,000 Ω
(1 to 9.76 KΩ)
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Jul 21, 2009 V.4
Product specification
3
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322
(1)
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(2)
(3)
4
Last digit
PAPER / PE TAPE ON REEL (units) (2)
X
0.01 to 0.0976
TYPE/ START TOL. RESISTANCE
0402 IN (1)
(%) RANGE
0
7
8
9
1
2
3
4
5
6
10,000
20,000/not preferred
50,000
705 87xxx
706 8xxxx
705 91007
X
0.1 to 0.976
X
1 to 9.76
RC31
2322
±5% 1 to 22 MΩ
±1% 1 to 10 MΩ
705 70xxx
706 7xxxx
705 91001
---
---
---
X
10 to 97.6
100 to 976
1 to 9.76 K
RC32 2322
Jumper 2322
X
-
0 Ω
X
(1) The resistors have a 12-digit ordering code starting with 2322.
X
10 to 97.6 K
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
X
100 to 976 K
X
1 to 9.76 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
10 to 97.6 M
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
(4) Letter L is system default code for order only (Note)
X
0.3
X
1
ORDERING EXAMPLE
33 K
10 M
The ordering code of a RC32 resistor, value 56 X with ±1% tolerance,
supplied in tape of 10,000 units per reel is: 232270675609L or
RC0402FR-0756RL.
X
NOTE
1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol can be printed
www.yageo.com
Jul 21, 2009 V.4
Product specification
4
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
MARKING
RC0402
No marking
ynsc007
Fig. 1
For further marking information, please see special data sheet “Chip resistors marking”
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
OUTLINES
For dimension see Table 1
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination(Ni/matte tin)
ceramic substrate
I
2
overcoat
I
1
terminations (matte tin on Ni-
barrier) are added. See fig.2
W
YNSC056
L
DIMENSIONS
Table 1
TYPE
RC0402
Fig. 2 Chip resistor outlines
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
1.00 ±0.05
0.50 ±0.05
0.32 ±0.05
0.20 ±0.10
0.25 ±0.10
www.yageo.com
Jul 21, 2009 V.4
Product specification
5
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
RC0402 1/16 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
–55 °C to +155 °C
50 V
100 V
100 V
5% (E24) 1 Ω to 22 MΩ
Resistance Range
1% (E24/E96) 1 Ω to 10 MΩ
Zero Ohm Jumper < 0.05 Ω
1 Ω ≤ R ≤ 10 Ω
±200 ppm/°C
±100 ppm/°C
±200 ppm/°C
1.0 A
Temperature Coefficient
Jumper Criteria
10 Ω < R ≤ 10 MΩ
10 MΩ < R ≤ 22 MΩ
Rated Current
Maximum Current
2.0 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
RC0402
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Paper Taping Reel (R)
7" (178 mm)
10" (254 mm)
13" (330 mm)
10,000 units
20,000 units
50,000 units
NOTE
1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC0402 rated power at 70°C is 1/16 W
P
MLB206_2
(%P
rated
)
RATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
155
o
(
C)
T
amb
or max. working voltage whichever is less
Where
Fig. 3 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Jul 21, 2009 V.4
Product specification
6
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
IEC 60115-1 4.8
PROCEDURE
REQUIREMENTS
Refer to table 2
Temperature
Coefficient of
Resistance
(T.C.R.)
At +25/–55 °C and +25/+125 °C
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
IEC 60115-1 4.25.1
IEC 60068-2-2
Life/Endurance
At 70±5 °C for 1,000 hours, RCWV applied for
1.5 hours on, 0.5 hour off, still air required
±(1.0%+0.05 Ω) for 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
1,000 hours at 155±5 °C, unpowered
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
MIL-STD-202G Method-106G
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(0.5%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after test conclusion
MIL-STD-202G Method-107G
Thermal Shock
-55/+125 °C
±(0.5%+0.05 Ω) for 1% tol.
±(1%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
IEC60115-1 4.13
Short Time
Overload
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
www.yageo.com
Jul 21, 2009 V.4
Product specification
7
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60068-2-21
PROCEDURE
REQUIREMENTS
Board Flex/
Bending
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05 Ω) for 1%, 5% tol.
<50 mΩ for Jumper
5 mm bending
No visible damage
Bending time: 60±5 seconds
IEC 60068-2-1
Low
Temperature
Operation
The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C
±(0.5%+0.05 Ω) for 1% tol .
±(1.0%+0.05 Ω) for 5% tol.
No visible damage
This constitutes shall be repeated for 96 hours
However the applied voltage shall not exceed
the maximum operating voltage
IEC 60115-1 4.6
IEC 60115-1 4.7
Insulation
Resistance
Rated continuous overload voltage (RCOV)
for 1 minute
≥10 GΩ
RC0402
Type
Voltage (DC)
100 V
Dielectric
Withstand
Voltage
Maximum voltage (Vrms) applied for 1 minute
No breakdown or flashover
RC0402
Type
Voltage (AC)
100 Vrms
IPC/JEDEC J-STD-020D
IEC 60115-1 4.12
Resistance to
Solvent
lsopropylalcohol (C3H7OH) followed by
brushing
No smeared
Noise
Maximum voltage (Vrms) applied
Value
Resistors range
R < 100 Ω
10 dB
20 dB
30 dB
40 dB
46 dB
48 dB
100 Ω ≤ R < 1 KΩ
1 KΩ ≤ R < 10 KΩ
10 KΩ ≤ R < 100 KΩ
100 KΩ ≤ R < 1 MΩ
1 MΩ ≤ R ≤ 22 MΩ
IEC 60115-1 4.37
Biased Humidity
(steady state)
Steady state for 1000 hours at 40 °C / 95% R.H.
RCWV applied for 1.5 hours on and
0.5 hour off
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
www.yageo.com
Jul 21, 2009 V.4
Product specification
8
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60115-1 4.39
PROCEDURE
REQUIREMENTS
Intermittent
Overload
2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDEC J-STD-002B test B
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDEC J-STD-002B test D
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(0.5%+0.05 Ω) for 1% tol .
±(1.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Leadfree solder, 260 °C, 10 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
www.yageo.com
Jul 21, 2009 V.4
Product specification
9
9
SERIES
0402 (RoHS Compliant)
RC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 4
Jul 21, 2009
-
- Test Items and methods updated
- Test requirements upgraded
Version 3
Jul 15, 2008
-
- Change to dual brand datasheet that describe RC0402 with RoHS
compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2
Sep 03, 2004
-
- New datasheet for 0402 thick film 1% and 5% with lead-free terminations
- Replace the 0402 part of pdf files: RC01_11_21_31_5,
RC02_12_22_32_10
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jul 21, 2009 V.4
232270675761 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
232270675761-L | YAGEO | RESISTOR, METAL GLAZE/THICK FILM, 0.0625 W, 1 %, 100 ppm, 576 ohm, SURFACE MOUNT, 0402, CHIP, LEAD FREE | 获取价格 | |
232270675761L | YAGEO | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 576ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT | 获取价格 | |
232270675762 | YAGEO | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 5760ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT | 获取价格 | |
232270675762-L | YAGEO | RESISTOR, METAL GLAZE/THICK FILM, 0.0625 W, 1 %, 100 ppm, 5760 ohm, SURFACE MOUNT, 0402, CHIP, LEAD FREE | 获取价格 | |
232270675762L | YAGEO | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 5760ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 | |
232270675763 | YAGEO | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 57600ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT | 获取价格 | |
232270675763-L | YAGEO | RESISTOR, METAL GLAZE/THICK FILM, 0.0625 W, 1 %, 100 ppm, 57600 ohm, SURFACE MOUNT, 0402, CHIP, LEAD FREE | 获取价格 | |
232270675763L | YAGEO | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 57600ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 | |
232270675764 | YAGEO | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 576000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT | 获取价格 | |
232270675764L | YAGEO | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 576000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT | 获取价格 |
232270675761 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6