232272471075 [YAGEO]
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1070000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT;型号: | 232272471075 |
厂家: | YAGEO CORPORATION |
描述: | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1070000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT 电阻器 |
文件: | 总11页 (文件大小:339K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GENERAL PURPOSE CHIP RESISTORS
RC1206
5%, 1%
RoHS compliant
Product specification
2
8
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC1206 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RC1206 X R - XX XXXX L
APPLICATIONS
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
ꢀ All general purpose application
( )
1 TOLERANCE
F = ±1%
FEATURES
J = ±5% (for Jumper ordering, use code of J)
ꢀ RoHS compliant
( )
2 PACKAGING TYPE
- Products with lead free
terminations meet RoHS
requirements
R = Paper taping reel
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
- Pb-glass contained in electrodes
– = Base on spec
- Resistor element and glass are
exempted by RoHS
( )
4 TAPING REEL
ꢀ Reducing environmentally
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
hazardous wastes
ꢀ High component and equipment
reliability
( )
5 RESISTANCE VALUE
ꢀ Saving of PCB space
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
ꢀ None forbidden-materials used
in products/production
Detailed resistance rules show in table of “Resistance rule of global part number”.
ꢀ Halogen Free Epoxy
(6) OPTIONAL CODE
L = optional symbol (Note)
Resistance rule of global part
number
ORDERING EXAMPLE
The ordering code of a RC1206
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC1206FR-0756R(L).
Resistance code rule
Example
0R
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Jul 15, 2008 V.3
Product specification
3
8
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322 / 2350 XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(1)
(2)
(3)
4
Last digit
PAPER / PE TAPE ON REEL (units) (2)
X
0.01 to 0.0976
0
7
8
9
1
2
3
4
5
6
TYPE/ START TOL. RESISTANCE
1206 IN (1)
(%) RANGE
X
0.1 to 0.976
5,000
10,000/not preferred
711 51xxx
724 7xxxx
-
20,000
711 81xxx
724 8xxxx
-
X
1 to 9.76
RC01
RC02
2322
2322
±5% 1 to 10 MΩ
±1% 1 to 10 MΩ
±5% 11 to 22 MΩ
711 61xxx
724 6xxxx
520 10xxx
711 91032
X
10 to 97.6
100 to 976
1 to 9.76 K
X
HRC01 2350
Jumper 2322
X
-
0 Ω
711 91005
711 92004
X
10 to 97.6 K
(1) The resistors have a 12-digit ordering code starting with 2322 / 2350.
X
100 to 976 K
X
1 to 9.76 M
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
X
10 to 97.6 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
X
0.3
X
1
(4) "L" is optional symbol (Note)
.
33 K
10 M
ORDERING EXAMPLE
X
The ordering code of a RC02 resistor, value 56 X with ±1% tolerance,
supplied in tape of 10,000 units per reel is: 232272465609(L) or
RC1206FR-0756R(L).
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
www.yageo.com
Jul 15, 2008 V.3
Product specification
4
8
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
MARKING
RC1206
E-24 series: 3 digits
03
YNSC001
First two digits for significant figure and 3rd digit for number of zeros
Fig. 1 Value = 10 KΩ
Both E-24 and E-96 series: 4 digits
00
YNSC004
First three digits for significant figure and 4th digit for number of zeros
Fig. 2 Value = 10 KΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
OUTLINES
For dimension see Table 1
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination(Ni/matte tin)
ceramic substrate
I
2
overcoat
I
1
terminations (matte tin on Ni-
barrier) are added. See fig.3
W
DIMENSIONS
YNSC066
Table 1
L
TYPE
RC1206
Fig. 3 Chip resistor outlines
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
3.10 ± 0.10
1.60 ± 0.10
0.55 ± 0.10
0.45 ± 0.20
0.40 ± 0.20
www.yageo.com
Jul 15, 2008 V.3
Product specification
5
8
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
RC1206 1/4 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
–55 °C to +155 °C
200 V
400 V
500 V
5% (E24) 1 Ω to 22 MΩ
Resistance Range
1% (E24/E96) 1 Ω to 10 MΩ
Zero Ohm Jumper < 0.05 Ω
1 Ω ≤ R ≤ 10 Ω
±200 ppm/°C
±200 ppm/°C
±100 ppm/°C
2 A
Temperature Coefficient
Jumper Criteria
10 MΩ ≤ R ≤ 22 MΩ
10 Ω < R ≤ 10 MΩ
Rated Current
Maximum Current
10 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
RC1206
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Paper Taping Reel (R)
7" (178 mm)
10" (254 mm)
13" (330 mm)
5,000 units
10,000 units
20,000 units
NOTE
1. For paper tape and reel specification/dimensions, please see the special data sheet “Packing” document.
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC1206 rated power at 70°C is 1/4 W
P
MLB206_2
(%P
rated
)
RATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
155
o
(
C)
T
amb
or max. working voltage whichever is less
Where
Fig. 4 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Jul 15, 2008 V.3
Product specification
6
8
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
MIL-STD-202G-method 108A
IEC 60115-1 4.25.1
JIS C 5202-7.10
Life/
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2%+0.05 Ω)
Operational Life/
Endurance
<100 mΩ for Jumper
MIL-STD-202G-method 108A
IEC 60115-1 4.25.3
High
Temperature
Exposure/
Endurance at
upper category
temperature
1,000 hours at maximum operating temperature
depending on specification, unpowered
±(1%+0.05 Ω)
<50 mΩ for Jumper
No direct impingement of forced air to the parts
Tolerances: 125±3 °C
JIS C 5202-7.11
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
±(2%+0.05 Ω)
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
MIL-STD-202G-method 107G
Thermal Shock
-55/+125 °C
±(0.5%+0.05 Ω) for 10 KΩ to
10 MΩ
Note: Number of cycles required is 300. Devices
unmounted
±(1%+0.05 Ω) for others
<50 mΩ for Jumper
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
MIL-R-55342D-para 4.7.5
IEC60115-1 4.13
Short time
overload
2.5 times RCWV or maximum overload voltage
whichever is less for 5 sec at room temperature
±(2%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
IEC60115-1 4.33
Board Flex/
Bending
Device mounted on PCB test board as described,
only 1 board bending required
±(1%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Jul 15, 2008 V.3
Product specification
7
8
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDECJ-STD-002B test B
IEC 60068-2-58
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDECJ-STD-002B test D
IEC 60068-2-58
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
MIL-STD-202G-method 210F
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(1%+0.05 Ω)
Leadfree solder, 270 °C, 10 seconds
immersion time
<50 mΩ for Jumper
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Jul 15, 2008 V.3
Product specification
8
8
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 3
Jul 15, 2008
-
- Change to dual brand datasheet that describe RC1206 with RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2
Sep 03, 2004
-
- New datasheet for 1206 thick film 1% and 5% with lead-free terminations
- Replace the 1206 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10,
and HRC01_5_4
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
- High ohmic products combined into standard products.
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jul 15, 2008 V.3
PHYCOMP - YAGEO CORPORATION
Composition of The Clear Text Code (R-Chip)
Version: 17 01-21-02
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
PHYCOMP Code
9C Phycomp Thick Film Chip Res
9T Phycomp Thin Film Chip Res
Size
Packaging
0201 0201 ( 0603 )
T 5K Paper
0402 0402 ( 1005 )
0603 0603 ( 1608 )
0805 0805 ( 2012 )
1210 1210 ( 3225 )
3
4
5
6
7
10K Paper
20K Paper
4K Blister
5K Blister
50K Paper
1206 1206 ( 3216 )
1218 1218 ( 3248 )
P 25K Bulk Case
2010 2010 ( 5025 )
2512 2512 ( 6432 )
4527 4527 ( 11070 )
AC34 0603 (1608) x 4 concave array
AV34 0603 (1608) x 4 convex array
AV22 0402 (1005) x 2 convex array
AV24 0402 (1005) x 4 convex array
AC24 0402 (1005) x 4 concave array
AV28 0402 (1005) x 8 convex array
RN31 10P8R in 1206 convex network
ARC241 / 242
ARV241 / 242
ARV321 / 322
ARV341
ARC341
ARV381 / 382
RNA310
Special Coding
HF PPCK, Sn/Pb
PF 100% Sn 2372
AF NiAu
RC21 10P4C4R in 1608 concave network RCB210
FR01 1206 (3216) Fusible
FR21 0603 (1608) Fusible
TCR
A
B
K
L
E
M
G
P
H
I
25 ppm/’C
50 ppm/’C
SR01 1206 (3216) Surge
100 ppm/’C
200 ppm/’C
250 ppm/’C
300 ppm/’C
500 ppm/’C
750 ppm/’C
1000 ppm/’C
1500 ppm/’C
2000 ppm/’C
3000 ppm/’C
VR01 1206 (3216) High Voltage 5%
VR02 1206 (3216) High Voltage 1%
Power Rating
1A 1/16W
1A 1/10W
2A 1/8 W
3A 1/4 W
4A 1/10 W
5A 1/3W
7A 1/20 W
8A 1/32 W
12 1/2 W
1W 1 W
0.063 W
0.1 W
0.125 W
0.25 W
0.1 W
0402
0603 Upgraded from 1/16W
0805
1206
0603
1210
0201
RNA310
2010
1218 / 2512
J
N
0.3W
0.05 W
0.03125 W
0.5 W
1 W
Tolerance
2W 2 W
2 W
A
B
C
D
F
G
J
N
R
±0.05%
±0.1%
±0.25%
±0.5 %
±1%
±2%
±5%
0 / 20%
0 / 30%
Resistance Value
0R00 Jumper
R0xx < 1R
6
0
7
8
9
1
2
3
4
5
6
7
Example:
Rxxx < 1R
Rchip 0603 (RC22H), 10R0, 1%, 5K reel =
9C06031A10R0FKHFT
xRxx 1R - 9.76R
xxRx 10R - 97.6R
xxx0 100R - 976R
xxx1 1K - 9.76K
xxx2 10K - 97.6K
xxx3 100K - 976K
xxx4 1M - 9.76M
xxx5 10M - 97.6M
xxx6 100M+
R-chip Array
A = Array
V = Convex C = Concave
3 = 0603
2 = 0402
2 = 2 Res.
4 = 4 Res.
marking code
for RCB210
Nxxx
Yageo America Corp HQ
16750 West Grove Dr. Suite 600 Addison, TX 75001-5156
Tel: 214-561-2020 Fax: 214-561-2019
Yageo
print-friendly version
Product Detail Information
Product Group
Ordering Code
Ordering Code
Unified CTC
Resistor Chips
RC1206JR-0768R
232271161689
RC1206JR-0768R
Additional Product Code9C12063A68R0JLHFT
Description
Status
General Purpose 1206 68 Ohm +-5% Paper 178mm (7")
Preferred
Series
Series
Size Code
Tolerance
Packing Style
TCR spec
General Purpose Chip Resistor
Thick Film High Ohmic Chip Resistor
1206 (3216)
±5%
Paper Tape
Standard-TC
Reel size & Specialty 180 mm (7") Reel
Resistance
Power Rating
68 Ohm
1/4W
Related Data Sheets, Catalogs and Application Notes:
Datasheet - General purpose chip resistors, RC1206 (RoHS Compliant) 5%, 1%; Rev.3
[295 kb]
Datasheet - Chip resistors mounting, Rev.5 [335 kb]
Datasheet - Chip resistors packing, Rev.6 [212 kb]
Datasheet - Introduction thick film chip resistor, Rev.7 [352 kb]
Datasheet - Chip resistors marking Rev.1 [239 kb]
Yageo Passive Components 2009 [3.86 mb]
Product Selection Guide 2009 [1.74 MB]
General info - Standard Values in a Decade [8.39 kb]
Appl. note - Low-ohmic & power chip resistors for power-control circuits [394 kb]
Ordering information for customers in North America [8 kb]
R-chip sample kits [62 kb]
For optimal printing of Data sheets print from page 2 of the PDF.
Note Clear Text Codes in the data sheets can differ from the Clear Text Codes displayed above.
The CTC displayed above is a new code which has been introduced to align product codes in the
complete Yageo organisation. You can search products with the CTC displayed in the data sheet
by using the competitor part number search function.
http://www.yageo.com/displayproduct?productid=58283&lbBrand=phycomp (1 of 2) [15-Jun-2009 8:31:38 AM]
Yageo
Documents are in PDF format so to view and print them you will need Adobe Acrobat Reader
installed on your computer. This is available free of charge.
Copyright © 2002-2005 Yageo Corporation
Privacy Policy | Access to and use of this web site is subject to the following Terms of use
Springsite Technology
http://www.yageo.com/displayproduct?productid=58283&lbBrand=phycomp (2 of 2) [15-Jun-2009 8:31:38 AM]
相关型号:
232272471075L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1070000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471102
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1100ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
232272471105L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1100000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471108L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1.1ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471133
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 11300ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
232272471135
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1130000ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
232272471135L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1130000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471139L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 11.3ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471154
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 115000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471155L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1150000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471158L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1.15ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
YAGEO
232272471184
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 118000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
©2020 ICPDF网 联系我们和版权申明