232273571108L [YAGEO]
Fixed Resistor, Metal Glaze/thick Film, 1W, 1.1ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT;型号: | 232273571108L |
厂家: | YAGEO CORPORATION |
描述: | Fixed Resistor, Metal Glaze/thick Film, 1W, 1.1ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT |
文件: | 总10页 (文件大小:428K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GENERAL PURPOSE CHIP RESISTORS
RC1218
5%, 1%
RoHS compliant & Halogen Free
Product specification
2
9
SERIES
1218
RC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC1218 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RC1218 X K - XX XXXX L
APPLICATIONS
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
All general purpose application
( )
1 TOLERANCE
F = ±1%
FEATURES
J = ±5% (for Jumper ordering, use code of J)
Halogen Free Epoxy
( )
2 PACKAGING TYPE
RoHS compliant
K = Embossed taping reel
-
-
Products with lead free
terminations meet RoHS
requirements
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
( )
4 TAPING REEL
07 = 7 inch dia. Reel
Reducing environmentally
( )
5 RESISTANCE VALUE
hazardous wastes
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
High component and equipment
reliability
Detailed resistance rules show in table of “Resistance rule of global part number”.
Saving of PCB space
None forbidden-materials used
(6) DEFAULT CODE
in products/production
Letter L is system default code for order only (Note)
Resistance rule of global part
number
O
RDERING EXAMPLE
The ordering code of a RC1218
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC1218FK-0756RL.
Resistance code rule
Example
0R
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our RSMD products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
2. On customized label, "LFP" or
specific symbol can be printed
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
1K = 1,000 Ω
(1 to 9.76 KΩ)
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Mar 15, 2010 V.3
Product specification
3
9
SERIES
1218
RC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322
(1)
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(2)
(3)
4
Last digit
EMBOSSED TAPE ON REEL (units) (2)
4,000
X
0.01 to 0.0976
0
7
8
9
1
2
3
4
5
6
TYPE/ START TOL.
RESISTANCE
RANGE
1218 IN (1)
(%)
X
0.1 to 0.976
X
1 to 9.76
PRC201
2322
±5%
±1%
-
1 to 1 MΩ
1 to 1 MΩ
0 Ω
735 64xxx
735 7xxxx
735 90007
X
10 to 97.6
100 to 976
1 to 9.76 K
PRC201 2322
Jumper 2322
X
X
(1) The resistors have a 12-digit ordering code starting with 2322.
X
10 to 97.6 K
X
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
100 to 976 K
X
1 to 9.76 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
10 to 97.6 M
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
X
0.3
(4) Letter L is system default code for order only (Note)
X
1
O
RDERING EXAMPLE
33 K
10 M
The ordering code of a PRC201 resistor, value 56 X with ±1% tolerance,
supplied in tape of 4,000 units per reel is: 232273575609L or
RC1218FK-0756RL.
X
NOTE
1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol can be printed
www.yageo.com
Mar 15, 2010 V.3
Product specification
4
9
SERIES
1218
RC
Chip Resistor Surface Mount
MARKING
RC1218
E-24 series: 3 digits
First two digits for significant figure and 3rd digit for number of zeros
YNSC023
Fig. 1 Value=100 Ω
Both E-24 and E-96 series: 4 digits
First three digits for significant figure and 4th digit for number of zeros
YNSC024
Fig. 2 Value=10 KΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
OUTLINES
For dimension see Table 1
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination (Ni/matte tin)
ceramic substrate
I
2
overcoat
I
1
terminations (matte tin on Ni-
barrier) are added. See fig.3
W
DIMENSIONS
YNSC066
Table 1
L
TYPE
RC1218
Fig. 3 Chip resistor outlines
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
3.10 ± 0.10
4.60 ± 0.10
0.55 ± 0.10
0.45 ± 0.20
0.40 ± 0.20
www.yageo.com
Mar 15, 2010 V.3
Product specification
5
9
SERIES
1218
RC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
RC1218 1 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
–55 °C to +155 °C
200 V
500 V
500 V
5% (E24) 1 Ω to 1 MΩ
Resistance Range
1% (E24/E96) 1 Ω to 1 MΩ
Zero Ohm Jumper < 0.02 Ω
1 Ω ≤ R ≤ 10 Ω
±200 ppm/°C
±100 ppm/°C
6 A
Temperature Coefficient
Jumper Criteria
10 Ω < R ≤ 1 MΩ
Rated Current
Maximum Current
10 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
RC1218
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Embossed taping reel (K)
7" (178 mm)
4,000 units
NOTE
1. For embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC1218 rated power at 70°C is 1 W
P
MLB206_2
(%P
rated
)
R
ATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
155
o
(
C)
T
amb
or max. working voltage whichever is less
Where
Fig. 4 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Mar 15, 2010 V.3
Product specification
6
9
SERIES
1218
RC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
IEC 60115-1 4.8
PROCEDURE
REQUIREMENTS
Refer to table 2
Temperature
Coefficient of
Resistance
(T.C.R.)
At +25/–55 °C and +25/+125 °C
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
IEC 60115-1 4.25.1
IEC 60068-2-2
Life/Endurance
At 70±5 °C for 1,000 hours, RCWV applied for
1.5 hours on, 0.5 hour off, still air required
±(1.0%+0.05 Ω) for 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
1,000 hours at 155±5 °C, unpowered
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
MIL-STD-202G Method-106G
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(0.5%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after test conclusion
MIL-STD-202G Method-107G
Thermal Shock
-55/+125 °C
±(0.5%+0.05 Ω) for 1% tol.
±(1%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
IEC60115-1 4.13
Short Time
Overload
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
www.yageo.com
Mar 15, 2010 V.3
Product specification
7
9
SERIES
1218
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60068-2-21
PROCEDURE
REQUIREMENTS
Board Flex/
Bending
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05 Ω) for 1%, 5% tol.
<50 mΩ for Jumper
2 mm bending
No visible damage
Bending time: 60±5 seconds
IEC 60068-2-1
Low
Temperature
Operation
The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C
±(0.5%+0.05 Ω) for 1% tol.
±(1.0%+0.05 Ω) for 5% tol.
No visible damage
This constitutes shall be repeated for 96 hours
However the applied voltage shall not exceed
the maximum operating voltage
IEC 60115-1 4.6
IEC 60115-1 4.7
Insulation
Resistance
Rated continuous overload voltage (RCOV)
for 1 minute
≥10 GΩ
RC1218
Type
Voltage (DC)
100 V
Dielectric
Withstand
Voltage
Maximum voltage (Vrms) applied for 1 minute
No breakdown or flashover
RC1218
Type
Voltage (AC)
500 Vrms
IPC/JEDEC J-STD-020D
IEC 60115-1 4.12
Resistance to
Solvent
lsopropylalcohol (C3H7OH) followed by
brushing
No smeared
Noise
Maximum voltage (Vrms) applied
Value
Resistors range
R < 100 Ω
10 dB
20 dB
30 dB
40 dB
46 dB
48 dB
100 Ω ≤ R < 1 KΩ
1 KΩ ≤ R < 10 KΩ
10 KΩ ≤ R < 100 KΩ
100 KΩ ≤ R < 1 MΩ
1 MΩ ≤ R ≤ 22 MΩ
IEC 60115-1 4.37
Humidity
(steady state)
Steady state for 1000 hours at 40 °C / 95% R.H.
RCWV applied for 1.5 hours on and
0.5 hour off
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
www.yageo.com
Mar 15, 2010 V.3
Product specification
8
9
SERIES
1218
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60115-1 4.39
PROCEDURE
REQUIREMENTS
Intermittent
Overload
2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDEC J-STD-002B test B
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDEC J-STD-002B test D
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(0.5%+0.05 Ω) for 1% tol.
±(1.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Leadfree solder, 260 °C, 10 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
www.yageo.com
Mar 15, 2010 V.3
Product specification
9
9
SERIES
1218
RC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 3
Mar 15, 2010
-
- Test items and methods updated
- Test requirements upgraded
- The statement of "Halogen Free" on the cover added
Version 2
Jul 15, 2008
-
-
- Change to dual brand datasheet that describe RC1218 with
RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 1
Oct 13, 2004
- New datasheet for 1218 thick film 1% and 5% with lead-free
terminations
- Replace the 1218 part of pdf files: PRC201_51_17
- Test method and procedure updated
- Taping reel changed from 11" to 7" and quantity per reel from 5K to
4K as well
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Mar 15, 2010 V.3
PHYCOMP - YAGEO CORPORATION
Composition of The Clear Text Code (R-Chip)
Version: 17 01-21-02
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
PHYCOMP Code
9C Phycomp Thick Film Chip Res
9T Phycomp Thin Film Chip Res
Size
Packaging
0201 0201 ( 0603 )
0402 0402 ( 1005 )
0603 0603 ( 1608 )
0805 0805 ( 2012 )
1210 1210 ( 3225 )
1206 1206 ( 3216 )
T
3
4
5
6
7
5K Paper
10K Paper
20K Paper
4K Blister
5K Blister
50K Paper
1218 1218 ( 3248 )
P 25K Bulk Case
2010 2010 ( 5025 )
2512 2512 ( 6432 )
4527 4527 ( 11070 )
AC34 0603 (1608) x 4 concave array
AV34 0603 (1608) x 4 convex array
AV22 0402 (1005) x 2 convex array
AV24 0402 (1005) x 4 convex array
AC24 0402 (1005) x 4 concave array
AV28 0402 (1005) x 8 convex array
RN31 10P8R in 1206 convex network
ARC241 / 242
ARV241 / 242
ARV321 / 322
ARV341
ARC341
ARV381 / 382
RNA310
Special Coding
HF PPCK, Sn/Pb
PF 100% Sn 2372
AF NiAu
RC21 10P4C4R in 1608 concave network RCB210
FR01 1206 (3216) Fusible
FR21 0603 (1608) Fusible
TCR
A
B
K
L
E
M
G
P
H
I
25 ppm/’C
50 ppm/’C
SR01 1206 (3216) Surge
100 ppm/’C
200 ppm/’C
250 ppm/’C
300 ppm/’C
500 ppm/’C
750 ppm/’C
1000 ppm/’C
1500 ppm/’C
2000 ppm/’C
3000 ppm/’C
VR01 1206 (3216) High Voltage 5%
VR02 1206 (3216) High Voltage 1%
Power Rating
1A 1/16W
1A 1/10W
2A 1/8 W
3A 1/4 W
4A 1/10 W
5A 1/3W
7A 1/20 W
8A 1/32 W
12 1/2 W
1W 1 W
0.063 W
0.1 W
0.125 W
0.25 W
0.1 W
0402
0603 Upgraded from 1/16W
0805
1206
0603
1210
0201
RNA310
2010
1218 / 2512
J
N
0.3W
0.05 W
0.03125 W
0.5 W
1 W
Tolerance
2W 2 W
2 W
A
B
C
D
F
G
J
N
R
±0.05%
±0.1%
±0.25%
±0.5 %
±1%
±2%
±5%
0 / 20%
0 / 30%
Resistance Value
0R00 Jumper
R0xx < 1R
6
0
7
8
9
1
2
3
4
5
6
7
Example:
Rxxx < 1R
Rchip 0603 (RC22H), 10R0, 1%, 5K reel =
9C06031A10R0FKHFT
xRxx 1R - 9.76R
xxRx 10R - 97.6R
xxx0 100R - 976R
xxx1 1K - 9.76K
xxx2 10K - 97.6K
xxx3 100K - 976K
xxx4 1M - 9.76M
xxx5 10M - 97.6M
xxx6 100M+
R-chip Array
A = Array
V = Convex C = Concave
3 = 0603
2 = 0402
2 = 2 Res.
4 = 4 Res.
marking code
for RCB210
Nxxx
Yageo America Corp HQ
16750 West Grove Dr. Suite 600 Addison, TX 75001-5156
Tel: 214-561-2020 Fax: 214-561-2019
相关型号:
232273571109L
Fixed Resistor, Metal Glaze/thick Film, 1W, 11ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
23227357119L
Fixed Resistor, Metal Glaze/thick Film, 1W, 11ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571203L
Fixed Resistor, Metal Glaze/thick Film, 1W, 12000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571209L
Fixed Resistor, Metal Glaze/thick Film, 1W, 12ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571249L
Fixed Resistor, Metal Glaze/thick Film, 1W, 12.4ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571278L
Fixed Resistor, Metal Glaze/thick Film, 1W, 1.27ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571373L
Fixed Resistor, Metal Glaze/thick Film, 1W, 13700ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571378L
Fixed Resistor, Metal Glaze/thick Film, 1W, 1.37ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571379L
Fixed Resistor, Metal Glaze/thick Film, 1W, 13.7ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571403L
Fixed Resistor, Metal Glaze/thick Film, 1W, 14000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571409L
Fixed Resistor, Metal Glaze/thick Film, 1W, 14ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571478L
Fixed Resistor, Metal Glaze/thick Film, 1W, 1.47ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
©2020 ICPDF网 联系我们和版权申明