232280664303L [YAGEO]

Fixed Resistor, Metal Glaze/thick Film, 0.05W, 43000ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT;


型号：	232280664303L
厂家：	YAGEO CORPORATION
描述：	Fixed Resistor, Metal Glaze/thick Film, 0.05W, 43000ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
文件：	总9页 (文件大小：423K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DATA SHEET

GENERAL PURPOSE CHIP RESISTORS

RC0201

5%, 1%, 0.5%

RoHS compliant & Halogen free

Product specification

SERIES

0201

Chip Resistor Surface Mount

SCOPE

ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC

This specification describes

RC0201 series chip resistors

with lead-free terminations made

by thick film process.

Both part numbers are identified by the series, size, tolerance, packing

type, temperature coefficient, taping reel and resistance value.

YAGEO BRAND ordering code

(

)

GLOBAL PART NUMBER PREFERRED

RC0201 X R - XX XXXX L

APPLICATIONS

( ) ( ) ( ) ( )

( )

All general purpose application

( )

1 TOLERANCE

D = ±0.5%

F = ±1%

FEATURES

Halogen Free Epoxy

J = ±5% (for Jumper ordering, use code of J)

RoHS compliant

( )

2 PACKAGING TYPE

Products with lead free

terminations meet RoHS

requirements.

R = Paper / PE taping reel

( )

3 TEMPERATURE COEFFICIENT OF RESISTANCE

Pb-glass contained in electrodes,

resistor element and glass are

exempted by RoHS.

– = Based on spec.

( )

4 TAPING REEL

Reduce environmentally

07 = 7 inch dia. Reel

hazardous wastes

7C = 7 inch dia. Reel, 1.5 x Standard Quantity

High component and equipment

7D = 7 inch dia. Reel, 2 x Standard Quantity

13 = 13 inch dia. Reel

reliability

Save of PCB space

( )

5 RESISTANCE VALUE

None forbidden-materials used

There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no

need to mention the last zero after R/K/M, e.g.1K2, not 1K20.

in products/production.

Detailed coding rules of resistance are shown in the table of “Resistance rule of global

part number”.

(6) DEFAULT CODE

Letter L is system default code for ordering only. ^(Note)

Resistance rule of global part

number

RDERING EXAMPLE

The ordering code of a RC0201

chip resistor, value 56 X with

±1% tolerance, supplied in 7-inch

tape of 15,000 units per reel is:

RC0201FR-7C56RL.

Resistance code rule

Example

D1 = Dummy

0R = Jumper

1R = 1 Ω

1R5 = 1.5 Ω

9R76 = 9.76 Ω

XRXX

(1 to 9.76 Ω)

NOTE

1. All our RSMD products meet RoHS

compliant and Halogen Free. "LFP" of

the internal 2D reel label mentions

"Lead Free Process".

XXRX

10R = 10 Ω

(10 to 97.6 Ω)

97R6 = 97.6 Ω

XXXR

(100 to 976 Ω)

100R = 100 Ω

2. On customized label, "LFP" or specific

symbol can be printed.

XKXX

1K = 1,000 Ω

(1 to 9.76 KΩ)

9K76 = 9760 Ω

XMXX

1M = 1,000,000 Ω

(1 to 9.76 MΩ)

9M76= 9,760,000 Ω

www.yageo.com

May 02, 2011 V.8

Product specification

SERIES

0201

Chip Resistor Surface Mount

PHYCOMP BRAND ordering codes

Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp

brand products.

(

)

GLOBAL PART NUMBER PREFERRED

For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.

12NC CODE

2322

(1)

XXX XXXXX L

Last digit of 12NC

Resistance decade ⁽³⁾

( )

(2)

(3)

Last digit

PAPER / PE TAPE ON REEL (units) ⁽²⁾

0.01 to 0.0976

TYPE/ START TOL. RESISTANCE

0201 IN ⁽¹⁾

(%) RANGE

0.1 to 0.976

10,000

20,000

806 80xxx

806 8xxxx

---

50,000

803 60xxx

806 6xxxx

---

1 to 9.76

RC41

2322

±5% 1 to 1 MΩ

±1% 1 to 1 MΩ

803 70xxx

806 7xxxx

803 91001

803 93001

10 to 97.6

100 to 976

1 to 9.76 K

RC42 2322

Jumper 2322

Dummy 2322

0 Ω

---

10 to 97.6 K

(1) The resistors have a 12-digit ordering code starting with 2322.

100 to 976 K

(2) The subsequent 4 or 5 digits indicate the resistor tolerance and

packaging.

1 to 9.76 M

10 to 97.6 M

(3) The remaining 4 or 3 digits represent the resistance value with the

last digit indicating the multiplier as shown in the table of

“Last digit of 12NC”.

Example: 0.02

0200 or 200

3007 or 307

1008 or 108

3303 or 333

1006 or 106

0.3

(Note)

(4) Letter L is system default code for order only.

33 K

10 M

RDERING EXAMPLE

The ordering code of a RC42 resistor, value 56 X with ±1% tolerance,

supplied in tape of 10,000 units per reel is: 232280675609L or

RC0201FR-0756RL.

NOTE

1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process".

2. On customized label, "LFP" or specific symbol can be printed.

www.yageo.com

May 02, 2011 V.8

Product specification

SERIES

0201

Chip Resistor Surface Mount

MARKING

RC0201

No marking

ynsc007

Fig. 1

For further marking information, please refer to data sheet “Chip resistors marking”.

CONSTRUCTION

OUTLINES

The resistor is constructed on

top of a high-grade ceramic body.

Internal metal electrodes are

added on each end to make the

contacts to the thick film resistive

element. The composition of the

resistive element is a noble metal

imbedded into a glass and

For dimension, please refer to Table 1

overcoat

protective glass

resistive layer

(Jumper chip is a conductor)

inner electrode

termination(Ni/matte tin)

inner electrode

ceramic substrate

covered by a second glass to

prevent environment influences.

The resistor is laser trimmed to

the rated resistance value. The

resistor is covered with a

overcoat

protective epoxy coat, finally the

two external terminations (matte

tin on Ni-barrier) are added, as

shown in Fig.2.

YNSC056

DIMENSIONS

Table 1

TYPE

Fig. 2 Chip resistor outlines

RC0201

L (mm)

W (mm)

H (mm)

I₁(mm)

I₂(mm)

0.60 ±0.03

0.30 ±0.03

0.23 ±0.03

0.10 ±0.05

0.15 ±0.05

www.yageo.com

May 02, 2011 V.8

Product specification

SERIES

0201

Chip Resistor Surface Mount

ELECTRICAL CHARACTERISTICS

FOOTPRINT AND SOLDERING

PROFILES

Table 2

For recommended footprint and

soldering profiles, please refer to

data sheet “Chip resistors

mounting”.

RC0201 1/20 W

CHARACTERISTICS

Operating Temperature Range

Maximum Working Voltage

Maximum Overload Voltage

Dielectric Withstanding Voltage

–55 °C to +125 °C

25 V

50 V

5% (E24) 1 Ω to 10 MΩ

1% (E24/E96) 1 Ω to 10 MΩ

0.5% (E24/E96) 10 Ω to 1 MΩ

Jumper < 0.05 Ω

Resistance Range

1 Ω ≤ R ≤ 10 Ω -100/+350 ppm/°C

Temperature Coefficient

Jumper Criteria

10 Ω < R ≤ 10 MΩ

Rated Current

±200 ppm/°C

0.5 A

Maximum Current

1.0 A

PACKING STYLE AND PACKAGING QUANTITY

Table 3 Packing style and packaging quantity

PRODUCT TYPE

RC0201

PACKING STYLE

REEL DIMENSION

QUANTITY PER REEL

Paper / PE Taping Reel (R)

7" (178 mm)

10,000/15,000/20,000 units

50,000 units

13" (330 mm)

NOTE

1. For paper/PE tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”.

2. For size of 0201, standard quantity is 10,000 units per reel.

FUNCTIONAL DESCRIPTION

POWER RATING

handbook, halfpage

RC0201 rated power at 70°C is 1/20 W

MLB206_1

(%P

rated

)

ATED VOLTAGE

100

The DC or AC (rms) continuous working voltage

corresponding to the rated power is determined by

the following formula:

V=√(P X R)

or max. working voltage whichever is less

50 70

100

125

(

amb

Where

Fig. 3 Maximum dissipation (P) in percentage of rated power as a

function of the operating ambient temperature (T

V=Continuous rated DC or

AC (rms) working voltage (V)

)

amb

P=Rated power (W)

R=Resistance value (X)

www.yageo.com

May 02, 2011 V.8

Product specification

SERIES

0201

Chip Resistor Surface Mount

TESTS AND REQUIREMENTS

Table 4 Test condition, procedure and requirements

TEST

TEST METHOD

IEC 60115-1 4.8

PROCEDURE

REQUIREMENTS

Temperature

Coefficient of

Resistance

(T.C.R.)

At +25/–55 °C and +25/+125 °C

Refer to table 2

Formula:

R₂–R₁

T.C.R= ------------------------- ×10⁶(ppm/°C)

R₁(t₂–t₁)

Where

t₁=+25 °C or specified room temperature

t₂=–55 °C or +125 °C test temperature

R₁=resistance at reference temperature in ohms

R₂=resistance at test temperature in ohms

IEC 60115-1 4.25.1

Life/Endurance

At 70±5 °C for 1,000 hours, RCWV applied for

1.5 hours on, 0.5 hour off, still air required

±(1.0%+0.05 Ω)

for 1%, 0.5% tol.

±(3.0%+0.05 Ω

for 5% tol.

<100 mΩ for Jumper

IEC 60068-2-2

High

1,000 hours at 125±5 °C, unpowered

±(1.0%+0.05 Ω)

Temperature

Exposure/

Endurance at

Upper Category

Temperature

for 1%, 0.5% tol.

±(2.0%+0.05 Ω)

for 5% tol.

<50 mΩ for Jumper

MIL-STD-202G Method-106G

Moisture

Resistance

Each temperature / humidity cycle is defined at 8

hours, 3 cycles / 24 hours for 10d. with 25 °C /

65 °C 95% R.H, without steps 7a & 7b,

unpowered

±(0.5%+0.05 Ω)

for 1%, 0.5% tol.

±(2.0%+0.05 Ω)

for 5% tol.

Parts mounted on test-boards, without

condensation on parts

<100 mΩ for Jumper

Measurement at 24±2 hours after test conclusion

MIL-STD-202G Method-107G

Thermal Shock

-55/+125 °C

±(0.5%+0.05 Ω)

for 1%, 0.5% tol.

Number of cycles required is 300. Devices

unmounted

±(1%+0.05 Ω)

for 5% tol.

Maximum transfer time is 20 seconds.

Dwell time is 15 minutes. Air – Air

<50 mΩ for Jumper

www.yageo.com

May 02, 2011 V.8

Product specification

SERIES

0201

Chip Resistor Surface Mount

TEST

TEST METHOD

IEC60115-1 4.13

PROCEDURE

REQUIREMENTS

Short Time

Overload

2.5 times of rated voltage or maximum overload

voltage whichever is less for 5 sec at room

temperature

±(1.0%+0.05 Ω)

for 1%, 0.5% tol.

±(2.0%+0.05 Ω)

for 5% tol.

<50 mΩ for Jumper

No visible damage

IEC 60068-2-21

IEC 60068-2-1

Board Flex/

Bending

Chips mounted on a 90mm glass epoxy resin

PCB (FR4)

±(1.0%+0.05 Ω)

<50 mΩ for Jumper

No visible damage

5 mm bending

Bending time: 60±5 seconds

Low

Temperature

Operation

The resistor shall be subjected to a DC rated

voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C

±(0.5%+0.05 Ω)

for 1%, 0.5% tol.

This constitutes shall be repeated for 96 hours

±(1.0%+0.05 Ω)

for 5% tol.

However the applied voltage shall not exceed

the maximum operating voltage

No visible damage

IEC 60115-1 4.6

IEC 60115-1 4.7

Insulation

Resistance

Rated continuous overload voltage (RCOV)

for 1 minute

≥10 GΩ

RC0201

Type

Voltage (DC)

50 V

Dielectric

Withstand

Voltage

Maximum voltage (V_rms) applied for 1 minute

No breakdown or flashover

RC0201

Type

Voltage (AC)

50 V_rms

IPC/JEDEC J-STD-020D

IEC 60115-1 4.12

Resistance to

Solvent

lsopropylalcohol (C₃H₇OH) followed by

brushing

No smeared

Noise

Maximum voltage (Vrms) applied

Value

10 dB

Resistors range

R < 100 Ω

100 Ω ≤ R < 1 KΩ

20 dB

30 dB

40 dB

46 dB

48 dB

1 KΩ ≤ R < 10 KΩ

10 KΩ ≤ R < 100 KΩ

100 KΩ ≤ R < 1 MΩ

1 MΩ ≤ R ≤ 22 MΩ

www.yageo.com

May 02, 2011 V.8

Product specification

SERIES

0201

Chip Resistor Surface Mount

TEST

TEST METHOD

IEC 60115-1 4.21

PROCEDURE

REQUIREMENTS

Humidity

Steady state for 1000 hours at 40 °C / 95%

R.H. RCWV applied for 1.5 hours on and

0.5 hour off

±(1.0%+0.05 Ω)

for 1%, 0.5% tol.

±(2.0%+0.05 Ω)

for 5% tol.

<100 mΩ for Jumper

IEC 60115-1 4.39

Intermittent

Overload

2.5 times of rated voltage or maximum

overload voltage whichever is less for 1 second

on and 25 seconds off; total 10,000 cycles

±(1.0%+0.05 Ω)

for 1%, 0.5% tol.

±(2.0%+0.05 Ω)

for 5% tol.

<100 mΩ for Jumper

Solderability

- Wetting

Well tinned (≥95% covered)

IPC/JEDEC J-STD-002B test B

Electrical Test not required

Magnification 50X

No visible damage

SMD conditions:

1^ststep: method B, aging 4 hours at 155 °C

dry heat

^ndstep: lead-free solder bath at 245±3 °C

Dipping time: 3±0.5 seconds

IPC/JEDEC J-STD-002B test D

- Leaching

Lead-free solder, 260 °C, 30 seconds

immersion time

No visible damage

IEC 60068-2-58

- Resistance to

Soldering Heat

Condition B, no pre-heat of samples

±(0.5%+0.05 Ω)

for 1%, 0.5% tol.

Lead-free solder, 260 °C, 10 seconds

immersion time

±(1.0%+0.05 Ω)

for 5% tol.

Procedure 2 for SMD: devices fluxed and

cleaned with isopropanol

<50 mΩ for Jumper

No visible damage

www.yageo.com

May 02, 2011 V.8

Product specification

SERIES

0201

Chip Resistor Surface Mount

REVISION HISTORY

REVISION DATE

CHANGE NOTIFICATION DESCRIPTION

Version 8

May 02, 2011

- Add ±0.5% tolerance for RC0201

- Add new taping reel code of 7 inch dia. reel with 1.5 x standard quantity

(15,000 units per reel)

- 10" taping reel removed

Version 7

Version 6

Jan 06, 2011

Apr 27, 2010

- Typo updated

- Updated test items and methods

- Add new taping reel code of 7 inch dia. reel with double standard

quantity (20,000 units per reel)

Version 5

Nov 10, 2009

- Test items and methods updated

- Test requirements upgraded

- Resistance range extend

Version 4

Version 3

Jul 15, 2008

- Description of "Halogen Free Epoxy" added

- Define global part number

Apr 25, 2007

- New datasheet for 0201 thick film 1% and 5% with lead-free terminations

- Replace the 0201 part of pdf files: Pu-RC0201_51_PbFree_L_2 and Yu-

RC0201_51_PbFree_L_2

- Max. working voltage, resistance rage, and TCR updated

- Tests and Requirements updated

Version 2

Sep 03, 2004

- New datasheet for 0201 thick film 1% and 5% with lead-free terminations

- Replace the 0201 part of pdf files: RC41_5_4, RC42_1_1

- Test method and procedure updated

- PE tape added (paper tape will be replaced by PE tape)

“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any

product change will be announced by PCN.”

www.yageo.com

May 02, 2011 V.8

232280664303L [YAGEO]

相关型号：

232280664322

232280664322L

232280664323

232280664323L

232280664324L

232280664328

232280664328L

232280664539

232280664641

232280664641L

232280664644

232280664644L