235002315362
更新时间：2024-09-18 17:29:29
品牌：YAGEO
描述：Array/Network Resistor, Isolated, 5360ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP
概述
规格参数
数据手册235002315362 概述
Array/Network Resistor, Isolated, 5360ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP 阵列/网络电阻器
235002315362 规格参数
| 是否Rohs认证： | 符合 | 生命周期： | Obsolete |
| 包装说明： | SMT, 0402 | Reach Compliance Code： | compliant |
| ECCN代码： | EAR99 | 风险等级： | 5.84 |
| 构造： | Chip | 元件功耗： | 0.063 W |
| 第一元件电阻： | 5360 Ω | JESD-609代码： | e3 |
| 安装特点： | SURFACE MOUNT | 网络类型： | ISOLATED |
| 元件数量： | 1 | 功能数量： | 4 |
| 端子数量： | 8 | 最高工作温度： | 125 °C |
| 最低工作温度： | -55 °C | 封装高度： | 0.45 mm |
| 封装长度： | 2 mm | 封装形状： | RECTANGULAR PACKAGE |
| 封装形式： | SMT | 封装宽度： | 1 mm |
| 包装方法： | TR, PAPER | 额定温度： | 70 °C |
| 电阻： | 5360 Ω | 电阻器类型： | ARRAY/NETWORK RESISTOR |
| 尺寸代码： | 0402 | 子类别： | Array/Network Resistors |
| 表面贴装： | YES | 温度系数： | 300 ppm/°C |
| 端子面层： | Matte Tin (Sn) | 端子形状： | WRAPAROUND |
| 容差： | 1% | 工作电压： | 50 V |
| Base Number Matches： | 1 |
235002315362 数据手册
通过下载235002315362数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载DISCRETE CERAMICS
ARV342
1%
Convex type array chip resistors
size 4 × 0402
2003 Apr 06 Rev.3
Phycomp
Product specification
Convex type array chip resistors
size 4 × 0402
ARV342
1%
FEATURES
QUICK REFERENCE DATA
DESCRIPTION
Resistance range
VALUE
• Reduced size of final equipment
• Low assembly costs
10 Ω to 1 MΩ; E96 series
±1%
300 10−6/K
• Higher component and equipment
Resistance tolerance
reliability.
Temperature coefficient
≤±
×
Absolute maximum at Tamb = 70 °C
0.063 W
APPLICATIONS
Maximum permissible voltage
Operating temperature range
Climatic category (IEC 60068)
Basic specification
50 V (DC or RMS)
−55 to +125 °C
55/155/56
• Camcorders
• Hand held measuring equipment
• Car telephones
IEC 60115-8
• Computer
ORDERING INFORMATION
• Portable radio, CD and cassette
players.
Table 1 Ordering code indicating resistor type and packing
ORDERING CODE 2350 023 …..
DESCRIPTION
TYPE
PAPER TAPE ON REEL
The resistors are constructed on a
high grade ceramic body (aluminium
oxide). Internal metal electrodes are
added at each end and connected
by a resistive paste which is applied
to the top surface of the substrate.
The composition of the paste is
adjusted to give the approximate
resistance required and the value is
trimmed to within tolerance, by laser
cutting of this resistive layer.
5000 units
1….
10000 units
ARV342
2….
Ordering code (12NC)
Table 2 Last digit of 12NC
RESISTANCE
10 to 91 Ω
100 to 910 Ω
1 to 9.1 kΩ
10 to 91 kΩ
100 to 910 kΩ
1 MΩ
LAST DIGIT
• The resistors have a 12-digit
ordering code starting with
2350 023.
9
1
2
3
4
5
• The subsequent first digit
indicates the resistor type and
packing; see Table 1.
The resistive layer is covered with a
protective coating. Finally, external
end terminations are added. For
ease of soldering the outer layer of
these end terminations is a lead-tin
alloy.
• The remaining 4 digits indicate the
resistance value:
− The first 3 digits indicate the
ORDERING EXAMPLE
resistance value.
The ordering code of an ARV342
convex type array chip resistor,
value 1000 Ω, supplied on paper
tape of 5000 units per reel is:
2350 023 110002.
− The last digit indicates the
resistance decade in
accordance with Table 2.
2003 Apr 06 Rev.3
2
www.yageo.com
Phycomp
Product specification
Convex type array chip resistors
size 4 × 0402
ARV342
1%
DERATING
FUNCTIONAL DESCRIPTION
Product characterization
The power that the resistor can dissipate depends on the operating
temperature; see Fig.1.
Standard values of nominal
resistance are taken from the E96
series for resistors with a tolerance
of ±1%.The values of the E96 series
are in accordance with
CCB412
P
(%P
max
)
rated
100
50
0
“IEC publication 60063”.
Limiting values
TYPE
LIMITING
VOLTAGE(1)
(V)
LIMITING
POWER
(W)
ARV342
50
0.063
−55
0
50 70
100
155
(°C)
amb
T
Note
1. This is the maximum voltage that
may be continuously applied to
the resistor element, see
Fig.1 Maximum dissipation (Pmax) in percentage of rated power as a
function of the ambient temperature (Tamb).
“IEC publication 60115-8”.
2003 Apr 06 Rev.3
3
www.yageo.com
Phycomp
Product specification
Convex type array chip resistors
size 4 × 0402
ARV342
1%
MECHANICAL DATA
Mass per 100 units
TYPE
Outlines
MASS
(g)
A
T
a
a
1
2
3
4
5 6
ARV342
0.30
B
Marking
W
There is no marking on the product;
the product is marked on request.
P
L
Details of cross section ‘a’ to ‘a’:
1 = Substrate.
PACKAGE MARKING
H
H
2
1
2 = Protective layer.
3 = Resistor.
G
The packing is marked and includes
resistance value, tolerance,
catalogue number, quantity,
production period, batch number and
source code.
4 = Inner termination.
5 = Nickel layer.
6 = Outer termination.
CCB257
For dimensions see Table 3.
Fig.2 Outlines.
Table 3 Physical dimensions; see Fig.2
SYMBOL
VALUE
2.00
1.00
0.45
0.20
0.20
0.50
0.30
0.30
0.20
TOL.
±0.10
±0.10
±0.10
±0.10
±0.10
±0.10
±0.10
±0.10
±0.10
UNIT
mm
mm
mm
mm
mm
mm
mm
mm
mm
L
W
T
A
B
P
G
H1
H2
2003 Apr 06 Rev.3
4
www.yageo.com
Phycomp
Product specification
Convex type array chip resistors
size 4 × 0402
ARV342
1%
TEST AND REQUIREMENTS
60068, “Recommended basic
In Table 4 the tests and
climatic and mechanical robustness
testing procedure for electronic
components” and under standard
atmospheric conditions according to
“IEC 60068-1”, subclause 5.3.
requirements are listed with
Essentially all tests are carried out in
accordance with the schedule of
“IEC publication 60115-8”, category
LCT/UCT/56 (rated temperature
range: Lower Category
Temperature, Upper Category
Temperature; damp heat, long term,
56 days). The testing also covers the
requirements specified by EIA, EIAJ
and JIS.
reference to the relevant clauses of
“IEC publications 60115-8 and
60068”; a short description of the
test procedure is also given. In some
instances deviations from the IEC
recommendations were necessary
for our method of specifying.
Unless otherwise specified the
following values apply:
Temperature: 15 °C to 35 °C
All soldering tests are performed
with mildly activated flux.
Relative humidity: 25% to 75%
Air pressure: 86 kPa to 106 kPa
(860 mbar to 1060 mbar).
The tests are carried out in
accordance with IEC publication
Table 4 Test procedures and requirements
IEC
IEC
60068-2
TEST
METHOD
60115-8
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
Tests in accordance with the schedule of IEC publication 60115-8
4.4.1
visual
examination
no holes; clean surface;
no damage
4.17
20 (Ta)
solderability
unmounted chips completely immersed good tinning
for 2 ±0.5 s in a solder bath at
235 ±2 °C
(≥95% covered);
no visible damage
4.18
4.29
20 (Tb)
45 (Xa)
resistance to
soldering heat
unmounted chips: 10 ±1 s; 260 ±5 °C
no visible damage
∆R/R max.: ±(1% + 0.05 Ω)
no visible damage
isopropyl alcohol or H2O followed by
component
solvent
brushing in accordance with
resistance
“MIL 202 F”
R − Rnom: max. ±1%
4.5
resistance
applied voltage (+0/−10%):
R < 10 Ω: 0.1 V
10 Ω ≤ R < 100 Ω: 0.3 V
100 Ω ≤ R < 1 kΩ: 1 V
1 kΩ ≤ R < 10 kΩ: 3 V
10 kΩ ≤ R < 100 kΩ: 10 V
100 kΩ ≥ R < 1 MΩ: 25 V
4.7
voltage proof
on insulation
maximum voltage (RMS) during
1 minute, metal block method
no breakdown or flashover
room temperature; P = 6.25 × Pn;
4.13
short time
overload
∆R/R max.: ±(1% + 0.05 Ω)
5 s (V ≤ 2 × Vmax
)
2003 Apr 06 Rev.3
5
www.yageo.com
Phycomp
Product specification
Convex type array chip resistors
size 4 × 0402
ARV342
1%
IEC
IEC
60068-2
TEST
METHOD
60115-8
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
4.33
4.19
bending
resistors mounted on a 90 mm glass
epoxy resin PCB (FR4);
bending: 5 mm
no visible damage
∆R/R max.: ±(1% + 0.05 Ω)
14 (Na)
3 (Ca)
rapid change
of temperature 30 minutes at UCT; 5 cycles
30 minutes at LCT and
no visible damage
∆R/R max.: ±(1% + 0.05 Ω)
∆R/R max.: ±(3% + 0.1 Ω)
4.24.2
4.25.1
damp heat
(steady state)
56 days; 40 ±2 °C; 93 +2/−3% RH;
loaded with 0.01 Pn
endurance
1000 hours +48/−0 hours; 70 ±2 °C;
∆R/R max.: ±(2% + 0.1 Ω)
∆R/R max.: ±(2% + 0.1 Ω)
≤±300 × 10−6/K
loaded with Pn or Vmax
;
1.5 hours on and 0.5 hours off
4.23.2
27 (Ba)
endurance at
upper category no load
temperature
1000 hours +48/−0 hours; 125 °C;
4.8.4.2
temperature
coefficient
at 20/LCT/20 °C and 20/UCT/20 °C:
Other tests in accordance with IEC 60115 clauses and IEC 60068 test method
4.17
20 (Ta)
solderability
8 hours steam or 16 hours at 155 °C;
good tinning
(after ageing)
unmounted chips completely immersed (≥95% covered); no damage
for 2 ±0.5 s in a solder bath at
235 ±2 °C
Rins min.: 103 MΩ
4.6.1.1
4.12
insulation
resistance
50 V (DC) after 1 minute,
metal block method
noise
IEC publication 60195
(measured with Quantech-equipment)
R ≤ 100 Ω
max. 0.316 µV/V (−10 dB)
max. 1 µV/V (0 dB)
100 Ω < R ≤ 1 kΩ
1 kΩ < R ≤ 10 kΩ
10 kΩ < R ≤ 100 kΩ
100 kΩ < R ≤ 1 MΩ
max. 3 µV/V (9.54 dB)
max. 6 µV/V (15.56 dB)
max. 10 µV/V (20 dB)
Other applicable tests
(JIS) C
5202 7.9
resistance to
damp heat
1000 +48/−0 hours; 40 ±2 °C;
93 +2/−3% RH;
∆R/R max.: ±(3% + 0.1 Ω)
loaded with Pn or Vmax
;
(steady state)
1.5 hours on and 0.5 hours off
EIA
leaching
unmounted chips 60 ±1 s; 260 ±5 °C
good tinning; no leaching
575 3.13
EIA/IS
load humidity
1000 +48/−0 hours;
∆R/R max.: ±(3% + 0.1 Ω)
703 4.5
85 ±2 °C; 85 ±5% RH;
loaded with 0.01 Pn or Vmax
2003 Apr 06 Rev.3
6
www.yageo.com
Phycomp
Product specification
Convex type array chip resistors
size 4 × 0402
ARV342
1%
REVISION HISTORY
Revision
Date
Change
Description
Notification
Rev.2
Rev.3
2001 Apr 27
2003 Apr 06
-
-
- Converted to Phycomp brand
- Update company logo
2003 Apr 06 Rev.3
7
www.yageo.com
235002315362 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| 235002315364 | YAGEO | Array/Network Resistor, Isolated, 536000ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002315623 | YAGEO | Array/Network Resistor, Isolated, 56200ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002315762 | YAGEO | Array/Network Resistor, Isolated, 5760ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002315763 | YAGEO | Array/Network Resistor, Isolated, 57600ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002315764 | YAGEO | Array/Network Resistor, Isolated, 576000ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002315769 | YAGEO | Array/Network Resistor, Isolated, 57.6ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002316659 | YAGEO | Array/Network Resistor, Isolated, 66.5ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002317321 | YAGEO | Array/Network Resistor, Isolated, 732ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002317322 | YAGEO | Array/Network Resistor, Isolated, 7320ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
| 235002317324 | YAGEO | Array/Network Resistor, Isolated, 732000ohm, 50V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 0402, CHIP | 获取价格 |
|
235002315362 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 5
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 8
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
