235004312432L [YAGEO]
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 2430ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT;型号: | 235004312432L |
厂家: | YAGEO CORPORATION |
描述: | Array/Network Resistor, Isolated, Metal Glaze/thick Film, 2430ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT 电阻器 |
文件: | 总8页 (文件大小:423K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ARRAY CHIP RESISTORS
YC248 (16Pin/8R)
5%, 1%
sizes 0616
RoHS compliant
Product specification
2
8
SERIES
YC
248 (RoHS Compliant)
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER
This specification describes
YC248 series chip resistor arrays
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
YC248 – X X X XX XXXX L
APPLICATIONS
(1) (2) (3) (4)
(5)
(6)
Terminal for SDRAM and
( )
1 TOLERANCE
DDRAM
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
Computer applications: laptop
computer, desktop computer
Consume electronic equipment:
( )
2 PACKAGING TYPE
PDAs, PNDs
R = Paper taping reel
K = Embossed taping reel
Mobile phone, telecom…
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
FEATURES
RoHS compliant
( )
4 TAPING REEL
07 = 7 inch dia. Reel
-
Products with lead free
terminations meet RoHS
requirements
( )
5 RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
-
-
Pb-glass contained in electrodes
Resistor element and glass are
exempted by RoHS
Detailed resistance rules show in table of “Resistance rule of global part number”.
Reducing environmentally
(6) OPTIONAL CODE
hazardous wastes
L = optional symbol (Note)
High component and equipment
reliability
Resistance rule of global part
number
O
RDERING EXAMPLE
Saving of PCB space
The ordering code of a YC248
convex chip resistor array, value
1,000 X with ±5% tolerance,
supplied in 7-inch tape reel is:
YC248-JR-071K(L).
None forbidden-materials used
Resistance code rule
Example
in products/production
0R
0R = Jumper
Halogen Free Epoxy
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
XXXR
(100 to 976 Ω)
100R = 100 Ω
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Oct 31, 2008 V.2
Product specification
3
8
SERIES
YC
248 (RoHS Compliant)
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2350
(1)
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(2)
(3)
4
Last digit
PAPER / PE TAPE ON REEL (units) (2)
5,000
X
0.01 to 0.0976
0
7
8
9
1
2
3
4
5
6
TYPE/ START TOL. RESISTANCE
0616
IN (1)
(%)
RANGE
X
0.1 to 0.976
X
1 to 9.76
ARV381
2350
±5% 10 to 1 MΩ
±1% 10 to 1 MΩ
053 10xxx
043 1xxxx
053 91001
X
10 to 97.6
100 to 976
1 to 9.76 K
ARV382 2350
Jumper
X
2350
-
0 Ω
X
(1) The resistors have a 12-digit ordering code starting with 2350.
X
10 to 97.6 K
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
X
100 to 976 K
X
1 to 9.76 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
10 to 97.6 M
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
(4) "L" is optional symbol (Note)
.
X
0.3
X
1
O
RDERING EXAMPLE
33 K
10 M
The ordering code of a ARV381 resistor, value 1,000 X with ±5%
tolerance, supplied in tape of 5,000 units per reel is: 235005310102(L)
or YC248-JR-071K(L).
X
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
www.yageo.com
Oct 31, 2008 V.2
Product specification
4
8
SERIES
YC
248 (RoHS Compliant)
Chip Resistor Surface Mount
MARKING
YC248
0
1-Digit marking
YNSC014
Fig. 1 Jumper = 0 Ω
E-24 series: 3 digits
2
YNSC035
First two digits for significant figure and 3rd digit for number of zeros
Fig. 2 Value = 240 KΩ
For further marking information, please see special data sheet “Chip resistors marking”
CONSTRUCTION
OUTLINES
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
overcoat
resistive layer
inner electrode
termination
ceramic substrate YNSC069
Fig. 3 Chip resistor outlines
coat, finally the two external terminations (matte tin on Ni-barrier) are added. See fig.3
DIMENSIONS
H
T
Table 1
B
W1
TYPE
YC248
0.30 ±0.15
0.45 ±0.05
0.50 ±0.05
4.00 ±0.20
0.45 ±0.10
0.40 ±0.15
1.60 ±0.15
W2
B (mm)
H (mm)
P (mm)
L (mm)
P
L
T (mm)
CCB261_b
W1 (mm)
W2 (mm)
Fig. 4 YC248 series chip resistors dimension
For dimension see Table 1
SCHEMATIC
For dimension see Fig. 4 and Table 1
16 15 14 13 12 11 10
9
R1 R2 R3 R4 R5 R6 R7 R8
CCB258_b
1
2
3
4
5
6
7
8
R1=R2=R3=R4=R5=R6=R7=R8
Fig. 5 Equivalent circuit diagram
www.yageo.com
Oct 31, 2008 V.2
Product specification
5
8
SERIES
YC
248 (RoHS Compliant)
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
YC248 1/16 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
Number of Resistors
–55 °C to +155 °C
50 V
100 V
100 V
8
5% (E24) 10 Ω to 1 MΩ
Resistance Range
1% (E24/E96) 10 Ω to 1 MΩ
Zero Ohm Jumper
< 0.05 Ω
±200 ppm/°C
2.0 A
Temperature Coefficient
Jumper Criteria
Rated Current
Maximum Current
10 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
YC248
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Paper Taping Reel (R)
7" (178 mm)
7" (178 mm)
5,000 units
4,000 units
Embossed taping reel (K)
NOTE
1. For Paper/Embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
FUNCTIONAL DESCRIPTION
P
OWER RATING
handbook, halfpage
YC 248 rated power at 70 °C is 1/16 W
P
MLB206_2
(%P
rated
)
R
ATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
155
o
(
C)
T
amb
or max. working voltage whichever is less
Where
Fig. 5 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Oct 31, 2008 V.2
Product specification
6
8
SERIES
YC
248 (RoHS Compliant)
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
MIL-STD-202G-method 108A
IEC 60115-1 4.25.1
JIS C 5202-7.10
Life/
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2%+0.05 Ω)
Operational Life/
Endurance
MIL-STD-202G-method 108A
IEC 60115-1 4.25.3
High
Temperature
Exposure/
Endurance at
upper category
temperature
1,000 hours at maximum operating temperature
depending on specification, unpowered
±(1%+0.05 Ω)
No direct impingement of forced air to the parts
Tolerances: 155±3 °C
JIS C 5202-7.11
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
±(2%+0.05 Ω)
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
MIL-STD-202G-method 107G
Thermal Shock
-55/+155 °C
±(0.5%+0.05 Ω) for 10 KΩ to
10 MΩ
Note: Number of cycles required is 300. Devices
unmounted
±(1%+0.05 Ω) for others
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
MIL-R-55342D-para 4.7.5
IEC60115-1 4.13
Short time
overload
2.5 times RCWV or maximum overload voltage
whichever is less for 5 sec at room temperature
±(2%+0.05 Ω)
No visible damage
IEC60115-1 4.33
Board Flex/
Bending
Device mounted on PCB test board as described,
only 1 board bending required
±(1%+0.05 Ω)
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Oct 31, 2008 V.2
Product specification
7
8
SERIES
YC
248 (RoHS Compliant)
Chip Resistor Surface Mount
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
IPC/JEDECJ-STD-002B test B
IEC 60068-2-58
Well tinned (≥95% covered)
No visible damage
Electrical Test not required
Magnification 50X
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDECJ-STD-002B test D
IEC 60068-2-58
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
MIL-STD-202G-method 210F
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(1%+0.05 Ω)
Leadfree solder, 270 °C, 10 seconds
immersion time
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Oct 31, 2008 V.2
Product specification
8
8
SERIES
YC
248 (RoHS Compliant)
Chip Resistor Surface Mount
REVISION HISTORY
REVISION
DATE
CHANGE NOTIFICATION
DESCRIPTION
- Change to dual brand datasheet that describes YC248 with RoHS
compliant
Version 2
Oct 31, 2008
-
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 1
Version 0
Feb 22, 2005
-
-
- New datasheet for 0616 (16Pin/8R) chip resistor arrays 1% and 5%
with lead-free terminations
- Replace the 0616 part of pdf files: ARV381_5_3.pdf and
ARV382_1_4.pdf
- Test method and procedure updated
Nov. 10, 2003
- First issue of this specification
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Oct 31, 2008 V.2
相关型号:
235004312433L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 24300ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312434L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 243000ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312439L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 24.3ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312492L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 2490ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312493L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 24900ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312494L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 249000ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312499L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 24.9ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312551L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 255ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312619
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 26.1ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0616, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
235004312671L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 267ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312743L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 27400ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
235004312801L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 280ohm, 50V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1606, CHIP, HALOGEN FREE EPOXY AND ROHS COMPLIANT
YAGEO
©2020 ICPDF网 联系我们和版权申明