9C08052A7681FKHFT [YAGEO]
RES SMD 7.68K OHM 1% 1/8W 0805;型号: | 9C08052A7681FKHFT |
厂家: | YAGEO CORPORATION |
描述: | RES SMD 7.68K OHM 1% 1/8W 0805 |
文件: | 总176页 (文件大小:17864K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT SELECTION GUIDE
2014
SMD RESISTORS + MLCC
SMD CERAMIC EMI FILTER CAPACITORS - X2Y®
WIRELESS COMPONENTS
MULTILAYER CHIP VARISTORS
Preface
Part numbering system and ordering
You can order components from this catalogue in two ways. Both ways give logistic and packing information.
•ꢀ Clear text ordering code
This unique number is an easily-readable code.
- 15 digits code (PHYCOMP CTC )
- 14 to 17 digits code (GLOBAL PART NUMBER for both Yageo and Phycomp branded products)
•ꢀ 12 digits ordering code
This unique 12NC number forms the basis of the Phycomp logistic system.
Youꢀwillꢀfindꢀdetailsꢀforꢀorderingꢀinꢀtheꢀ"
section next to each selection chart.
Ordering"
Minimum shipment quantities, prices and delivering details can be obtained from the Yageo sales organization in
your country or from one of our franchised distributors.
Case size codes
Throughout this catalogue, inch-based codes are used
Case size designation and cross-reference
for the component sizes. According to IEC 60384-10,
Inch-based Metric Inch-based Metric Inch-based
Metric
3250M
3264M
4532M
5320M
5025M
5750M
6432M
7836M
11070M
amendment 2 of September 2000 for MLCCs, and IEC
60115-8, amendment 1 of July 2000 for R-chip. Values
for length and width should be in millimeters rather than
in inches. To distinguish between inch-based codes and
metric-based codes, metric-based codes will temporarily
have the suffix ‘’M’’. The table right next shows the
relation between inch-based case sizes versus the
recommended metric case size designators. Please note
that HF products use metric case size only.
0050
0075
01005
0201
0202
0402
0404
0408
0508
0603
0201M
03015M
0402M
0603M
0605M
1005M
1010M
1020M
1220M
1608M
0606
0612
0616
0805
0815
0830
1008
1206
1210
1218
1616M
1632M
1640M
2012M
2037M
2075M
2520M
3216M
3225M
3245M
1224
1225
1812
2007
2010
2220
2512
3014
4527
Contact us
Founded in 1977, the Yageo Corporation has become a world-class provider of passive-component services with
capabilities on a global scale, including production and sales facilities in Asia, Europe and America. The corporation
is uniquely positioned to provide one-stop-shopping, offering its complete product portfolio of resistors, capacitors
and inductors in both commodity and specialty versions, plus design-in capability, distribution, e-commerce
connection and logistics. Yageo markets its products under the product brand names Yageo, Phycomp and Vitrohm.
AllꢀproductsꢀcanꢀbeꢀobtainedꢀfromꢀourꢀYageoꢀsalesꢀoffices,ꢀofꢀwhichꢀcontactꢀdetailsꢀcanꢀbeꢀfoundꢀonꢀtheꢀbackcoverꢀofꢀ
this catalogue. For most up-to-date information, as well as contact details of our franchise distributors, please refer to
our website: www.yageo.com
3
Table of Contents
Chip Resistors General Information
8
8
Specificationꢀoverview
Ordering information - Global part number
Ordering information - North America
13
15
16
17
17
17
22
22
24
24
27
27
31
31
33
34
35
35
39
40
40
43
43
46
46
51
51
54
54
57
57
60
60
63
63
66
66
69
69
72
75
75
78
78
IEC publication 63, SPQ, last digit of 12NC
Chip Resistors Selection Charts
RCꢀ-ꢀThickꢀfilmꢀchipꢀresistors
RCꢀ-ꢀThickꢀfilmꢀgeneralꢀpurposeꢀchipꢀresistors,ꢀ01005ꢀtoꢀ2512
RCꢀ-ꢀThickꢀfilmꢀhighꢀohmicꢀchipꢀresistors
RCꢀ-ꢀThickꢀfilmꢀhighꢀohmicꢀchipꢀresistors,ꢀ0805ꢀ/ꢀ1206
REꢀ-ꢀThickꢀfilmꢀprecisionꢀgradeꢀchipꢀresistors
REꢀ-ꢀThickꢀfilmꢀprecisionꢀgradeꢀchipꢀresistors,ꢀ0402ꢀtoꢀ1206
RTꢀ-ꢀThinꢀfilmꢀhighꢀprecisionꢀhighꢀstabilityꢀchipꢀresistors
RTꢀ-ꢀThinꢀfilmꢀhighꢀprecisionꢀhighꢀstabilityꢀchipꢀresistors,ꢀ0402ꢀtoꢀ2512
YC/TCꢀ-ꢀThickꢀfilmꢀarrayꢀ/ꢀnetworkꢀchipꢀresistors
YC/TCꢀ-ꢀThickꢀfilmꢀarrayꢀ/ꢀnetworkꢀchipꢀresistorsꢀꢀꢀꢀ
YC/TCꢀ-ꢀArrays,ꢀconvexꢀ/ꢀconcaveꢀ/ꢀflatꢀꢀ
YCꢀ-ꢀNetworks,ꢀT-typeꢀ/ꢀL-type
RLꢀ-ꢀThickꢀfilmꢀlowꢀohmicꢀchipꢀresistors
RLꢀ-ꢀThickꢀfilmꢀlowꢀohmicꢀchipꢀresistors,ꢀ0402ꢀtoꢀ2512
RLꢀ-ꢀThickꢀfilmꢀlowꢀohmic,ꢀhighꢀpowerꢀchipꢀresistors,ꢀ0402ꢀ/ꢀ1206
PTꢀ-ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors
PTꢀ-ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors,ꢀ0402ꢀtoꢀ2512
PTꢀ-ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors,ꢀwideꢀtermination
PTꢀ-ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors,ꢀwideꢀtermination,ꢀ0815
PR/PA/PF/PH/PEꢀ-ꢀCurrentꢀsensorsꢀ-ꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors
PR/PA/PF/PH/PEꢀ-ꢀCurrentꢀsensorsꢀ-ꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors,ꢀ0402ꢀtoꢀ4527
PE/PFꢀ-ꢀCurrentꢀsensorsꢀ-ꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors,ꢀwideꢀtermination
PE/PFꢀ-ꢀCurrentꢀsensorsꢀ-ꢀlowꢀT.ꢀC.ꢀR.ꢀchipꢀresistors,ꢀwideꢀtermination,ꢀ0612ꢀtoꢀ0830
PS - Current sensors - low T. C. R. chip resistors, 4 termination
PS - Current sensors - low T. C. R. chip resistors, 4 termination, 0306 to 1225
AR - NiAu termination chip resistors
AR - NiAu termination chip resistors, 0402 to 1206
SR - Surge chip resistors
SR - Surge chip resistors, 0402 to 2512
RV - High voltage chip resistors
RV - High voltage chip resistors, 0603 to 2512
TR - Trimmable chip resistors
TR - Trimmable chip resistors, 0402 to 1206
AF - Sulfur resistant chip resistors
AF - Sulfur resistant chip resistors, 0201 to 2512
AF - Sulfur resistant chip resistors, Arrays
AC - Automotive grade chip resistors
AC - Automotive grade chip resistors, 0402 to 2512
AT - RF attenuator chip resistors
AT - RF attenuator chip resistors, 0404
4
Table of Contents
Chip Resistors Engineering Design Kits
MLCC General Information
81
81
81
84
84
85
Engineering design kits
Engineering design books
Specificationꢀoverviewꢀ
Ordering information - Global part number
Thickness classes and packing quantities for all series
87
88
MLCC Selection Charts
NP0 - General purpose
88
NP0 - General purpose 16 to 50V, 01005 to 0603
NP0 - General purpose 16 to 50V, 0805 to 1812
NP0 - Medium & High voltage
89
91
93
NP0 - Medium voltage, 0402 to 0805
94
NP0ꢀ-ꢀMediumꢀvoltage,ꢀ1206ꢀ/ꢀ1210
95
NP0 - High voltage, 0805 to 1210
96
NP0ꢀ-ꢀHighꢀvoltage,ꢀ1808ꢀ/ꢀ1812
97
NP0 - High frequency
98
NP0 - High frequency, 01005 to 0805
98
X7R - General purpose & High capacitance
X7R - General purpose & High capacitance, 01005 to 0402
X7Rꢀ-ꢀGeneralꢀpurposeꢀ&ꢀHighꢀcapacitance,ꢀ0603ꢀ/ꢀ0805
X7R - General purpose & High capacitance, 1206 to 2220
X7R - Medium & High voltage
100
101
102
103
104
105
106
107
108
108
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
X7R - Medium voltage & High voltage, 0402 to 0805
X7R - Medium voltage &ꢀHighꢀvoltage,ꢀ1206ꢀ/ꢀ1210
X7R - Medium voltage &ꢀHighꢀvoltage,ꢀ1808ꢀ/ꢀ1812
X7R/ꢀX5Rꢀ-ꢀLowꢀinductance
X7R/ꢀX5R - Low inductance, 0306 to 0612
X7R - Soft termination
X7Rꢀ-ꢀSoftꢀtermination,ꢀ0603ꢀ/ꢀ0805
X7R - Soft termination, 1206
X7Rꢀ-ꢀSoftꢀtermination,ꢀ1210ꢀ/ꢀ1812
X5R - General purpose & High capacitance
X5R - General purpose & High capacitance, 01005 to 0402
X5Rꢀ-ꢀGeneralꢀpurposeꢀ&ꢀHighꢀcapacitance,ꢀ0603ꢀ/ꢀ0805
X5R - High capacitance & High capacitance, 1206
X5Rꢀ-ꢀHighꢀcapacitance,ꢀ1210ꢀ/ꢀ1812
Y5V - General purpose & High capacitance
Y5Vꢀ-ꢀGeneralꢀpurposeꢀ&ꢀHighꢀcapacitanceꢀ6.3ꢀtoꢀ25V,ꢀ0201ꢀ/ꢀ0402
Y5Vꢀ-ꢀGeneralꢀpurposeꢀ&ꢀHighꢀcapacitanceꢀ6.3ꢀtoꢀ25V,ꢀ0603ꢀ/ꢀ0805
Y5Vꢀ-ꢀGeneralꢀpurposeꢀ&ꢀHighꢀcapacitanceꢀ6.3ꢀtoꢀ25V,ꢀ1206ꢀ/ꢀ1210
Y5V - General purpose & High capacitance 50V, 0402 to 1206
Automotive grade MLCCs
NP0 - Automotive grade, 0402 to 0805
NP0ꢀ-ꢀAutomotiveꢀgrade,ꢀ1206ꢀ/ꢀ1210
X7Rꢀ-ꢀAutomotiveꢀgrade,ꢀ0402ꢀ/ꢀ0603
X7R - Automotive grade, 0805
5
Table of Contents
X7R - Automotive grade, 1206
129
130
131
131
132
133
133
135
136
137
138
138
139
140
141
142
143
X7R - Automotive grade, 1210
SafetyꢀcertificationꢀMLCCs
NPOꢀ-ꢀHighꢀvoltageꢀSCꢀtype,ꢀ1808ꢀ/ꢀ1812
X7Rꢀ-ꢀHighꢀvoltageꢀSCꢀtype,ꢀ1808ꢀ/ꢀ1812ꢀ
Arrays
NPOꢀ/ꢀX7Rꢀ/ꢀY5V-ꢀ4CꢀArrays,ꢀ0508ꢀ/ꢀ0612
NPOꢀ-ꢀ4CꢀArrays,ꢀ0508ꢀ/ꢀ0612
X7Rꢀ-ꢀ4CꢀArrays,ꢀ0508ꢀ/ꢀ1612
Y5V - 4C Arrays, 0612
MLCC Engineering Design Kits
Sampleꢀkitsꢀforꢀ0201ꢀ/ꢀ0402
Sampleꢀkitsꢀforꢀ0603ꢀ/ꢀ0805
Sample kits for 1206
Sample kits for high capacitance series
High voltage sample kits for general applications
Sample kits for high frequency series
X2Y® Product Selection Charts
146
146
147
SMDꢀceramicꢀEMIꢀfilterꢀcapacitorsꢀX2Y® series
Ordering information
Wireless Components Selection Charts
152
152
153
154
154
155
156
157
159
160
161
164
166
166
Introduction
Key features of Wireless Components
Product Information
Antenna - 2.4 GHz
Antennaꢀ-ꢀ2.4ꢀ/ꢀ5ꢀGHz
Antennaꢀ-ꢀCellularꢀWWANꢀ/ꢀShortꢀRange
Antenna - GPS
Antennaꢀ-ꢀGPSꢀ/ꢀGlonassꢀ/ꢀActiveꢀAntenna
Antenna - Others
Filters
Ordering Information
Wireless Components Engineering Design Kits
MLV Product Selection Charts
Sample Kit
168
169
170
171
172
173
Specificationꢀforꢀ0402ꢀ
Specificationꢀforꢀ0603
Specificationꢀforꢀ0805
Specificationꢀforꢀ1206
Ordering information for 0402 to 1206
6
SURFACE-MOUNT CHIP RESISTORS
Chip Resistors General Information
Specification overview
Power Max.
rating voltage Temp. range
Operating
Resistance
range
Global part number Series
RC0100xR-07xxxxL
Size
Tolerance
T. C. R.
1Ωꢀ≤ꢀRꢀ≤ꢀ1M
Ω
±1%
±5%
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ10
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Ω
-200~600ꢀppm/°C
±250ꢀppm/°C
01005
1/32Wꢀ 15V
-55°C to 125°C
1/20Wꢀ 25V
Jumper < 50m
Ω
10
Ω
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ10M
Ω
Ω
Max./Min.:ꢀ1MΩ/10Ω
±0.5%
±1%,±5%
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ10
Ωꢀ<ꢀRꢀ≤ꢀ10M
Ω
Ω
-100/+350ꢀppm/°C
±200ꢀppm/°Cꢀ
RC0201xR-07xxxxL
0201
Jumper < 50m
Max.: 10M
Ω
10
RC0402xR-07xxxxL
RC0603xR-07xxxxL
RC0805xR-07xxxxL
RC1206xR-07xxxxL
RC1210xR-07xxxxL
0402
0603
0805
1206
1210
1/16Wꢀ 50V
1/10Wꢀ 50V
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ22M
Ω
Ω
1/8Wꢀ 150V
Jumper < 50m
Max./Min.:ꢀ1M
Ω
/10
Ω
±0.1%
±0.5%
±1%
1/4Wꢀ 200V
1
Ω
Ω
Ω
ꢀ≤ꢀRꢀ≤ꢀ10
ꢀ<ꢀRꢀ≤ꢀ10M
ꢀ<ꢀRꢀ≤ꢀ22M
Ω
Ω
Ω
±200ꢀppm/°C
±100ꢀppm/°C
±200ꢀppm/°C
1/2Wꢀ 200V -55°C to 155°C
10
10M
Max.: 10M
Max.: 22M
Ω
Ω
RC
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
±5%
RC1218xK-07xxxxL
1218
1W
200V
Jumper < 50m
Ω
RC2010xK-07xxxxL
RC2512xK-07xxxxL
2010
2512
3/4Wꢀ 200V
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ22M
Ω
Ω
Jumper < 50m
1W
200V
50V
0603
1/5W
1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
RC0603xR-7WxxxxL
RC0805xR-7WxxxxL
RC1206xR-7WxxxxL
RC2512xK-7WxxxxL
RC0805xR-07xxxxL
RC1206xR-07xxxxL
RE0402xRE07xxxxL
0805
1206
2512
0805
1206
0402
0603
0805
1206
0402
0603
0805
1206
1210
2010
2512
1/4Wꢀ 150V
1/2Wꢀ 200V
±1%
±5%
±200ꢀppm/°C
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
-55°C to 155°C
-55°C to 155°C
2W
200V
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ150Ω
1/8Wꢀ 150V
1/4Wꢀ 200V
1/16Wꢀ 50V
1/10Wꢀ 50V
1/8Wꢀ 150V
1/4Wꢀ 200V
1/16Wꢀ 50V
1/10Wꢀ 75V
1/8Wꢀ 150V
1/4Wꢀ
24M
24M
Ω
Ω
ꢀ≤ꢀRꢀ≤ꢀ100M
Ω
Ω
±5%, ±10%, ±20%
±300ꢀppm/°C
±50ꢀppm/°C
ꢀ≤ꢀRꢀ≤ꢀ100M
10
10
10
10
Ω
Ω
Ω
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
ꢀ≤ꢀRꢀ≤ꢀ1M
ꢀ≤ꢀRꢀ≤ꢀ1M
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Ω
Ω
Ω
±0.1%
±0.5%
±1%
RE0603xRE07xxxxL
RE
RE0805xRE07xxxxL
RE1206xRE07xxxxL
RT0402xRx07xxxxL
RT0603xRx07xxxxL
RT0805xRx07xxxxL
10Ωꢀ≤ꢀRꢀ≤ꢀ121KΩ
5.1Ω
5.1Ω
5.1Ω
ꢀ≤ꢀRꢀ≤ꢀ681KΩ
±0.05%
±0.1%
±0.25%
±0.5%
±1%
-55°C to 155°C
-55°C to 125°C
±10ꢀppm/°Cꢀ
±15ꢀppm/°Cꢀ
±25ꢀppm/°Cꢀ
±50ꢀppm/°Cꢀ
ꢀ≤ꢀRꢀ≤ꢀ1.5M
Ω
Ω
RT1206xRx07xxxxL
RT1210xRx07xxxxL
RT2010xKx07xxxxL
RT2512xKx07xxxxL
RT
YC
TC
ꢀ≤ꢀRꢀ≤ꢀ1.5M
1/4Wꢀ
200V
1/2Wꢀ
5.1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
10
10
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
3/4Wꢀ
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
YC102-xR-07xxxxL
YC104-xR-07xxxxL
YC122-xR-07xxxxL
2*0201 1/32Wꢀ 15V
10
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Ω
±1%
±5%
Jumper < 50m
4*0201 1/32W 12.5V -55°C to 125°C
2*0402 1/16Wꢀ 50V
±200ꢀppm/°C
1Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Max./Min.:ꢀ1M
Ω
/10
Ω
Ω
±1%
±5%
Jumper < 50m
Ω
Max.: 1M
1Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
±1%
±5%
1
Ω
ꢀ≤ꢀRꢀ<ꢀ10
10Ωꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Ω
±250ꢀppm/°C
±200ꢀppm/°C
YC124-xR-07xxxxL
YC162-xR-07xxxxL
YC164-xR-07xxxxL
YC248-xR-07xxxxL
4*0402 1/16Wꢀ 25V
2*0603 1/16Wꢀ 50V
4*0603 1/16Wꢀ 50V
8*0602 1/16Wꢀ 50V
-55°C to 155°C
-55°C to 125°C
Jumper < 50m
Ω
10 ꢀ≤ꢀRꢀ≤ꢀ1M
Jumper < 50m
Ω
Ω
Ω
±5%
1Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Jumper < 50m
Ω
±200ꢀppm/°C
±200ꢀppm/°C
±1%
±5%
-55°C to 155°C
-55°C to 125°C
10 ꢀ≤ꢀRꢀ≤ꢀ1M
Jumper < 50m
Ω
Ω
Ω
YC324-xK-07xxxxL
TC122-xR-07xxxxL
TC122HxR-07xxxxL
TC122MxR-07xxxxL
TC124-xR-07xxxxL
TC124HxR-07xxxxL
TC124MxR-07xxxxL
TC164-xR-07xxxxL
4*1206
1/8Wꢀ 200V
10
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
!
!
2*0402 1/16Wꢀ 50V
10
Ω
ꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Ω
±1%
±5%
Jumper < 50m
!
!
4*0402 1/16W
50V
4*0603 1/16Wꢀ 50V
1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Note: " ! "ꢀisꢀtheꢀsymbolꢀforꢀnewꢀproduct
8
Chip Resistors General Information
Specification overview
Power
rating
Max.
voltage
Operating
Temp. range
Resistance
range
Global part number
YC158TJR-07xxxxL
YC358xJK-07xxxxL
RL0402xR-07xxxxL
RL0603xR-07xxxxL
RL0805xR-07xxxxL
RL1206xR-07xxxxL
RL1210xR-07xxxxL
RL1218xK-07xxxxL
RL2010xK-07xxxxL
RL2512xK-07xxxxL
RL0805xR-7WxxxxL
RL1206xR-7WxxxxL
PT0402xR-07xxxxL
PT0603xR-07xxxxL
PT0805xR-07xxxxL
PT1206xR-07xxxxL
PT2010xK-07xxxxL
PT2512xK-07xxxxL
PT0402xR-7WxxxxL
PT0603xR-7WxxxxL
PT0805xR-7WxxxxL
PT1206xR-7WxxxxL
PT2010xK-7WxxxxL
PT2512xK-7WxxxxL
PT0402xR-7TxxxxL
PT0603xR-7TxxxxL
PT0815xK-07xxxxL
PT0815xK-7WxxxxL
Series Size
Tolerance
T. C. R.
10P8R
YC158
1/16Wꢀ
1/16Wꢀ
25V
50V
10
10
Ω
Ω
ꢀ≤ꢀRꢀ≤ꢀ100K
Ω
Ω
ꢀ±200ꢀppm/°C
±200ꢀppm/°Cꢀ
(0612)
-55°C to 155°C
±5%
10P8R
YC358
ꢀ≤ꢀRꢀ≤ꢀ330K
(1225)
50mΩꢀ≤ꢀRꢀ<ꢀ1Ω
Jumperꢀ<ꢀ20mΩ
0402 1/16Wꢀ
0603 1/10Wꢀ
10m
Ωꢀ≤ꢀRꢀ<ꢀ1Ω
0805
1206
1210
1218
2010
2512
0805
1206
1/8Wꢀ
1/4W
1/2Wꢀ
1W
Jumperꢀ<ꢀ20mΩ
±1%
±2%
±5%
See page 36,
table “T. C. R. - RL series“
RL
(PxR)^1/2ꢀ -55°C to 125°C
10m
Ωꢀ≤ꢀRꢀ<ꢀ1
Ω
3/4Wꢀ
1W
1/4Wꢀ
1/2Wꢀ
10m
50m
Ω
ꢀ≤ꢀRꢀ<ꢀ1
Ω
Ω
Ωꢀ≤ꢀRꢀ<ꢀ1
0402 1/16W
0603 ꢀ1/10Wꢀ
Jumperꢀ<ꢀ10mΩ
50m ꢀ≤ꢀRꢀ<ꢀ1
Jumperꢀ<ꢀ8mΩ
Ω
Ω
0805
1206
2010
2512
0402
0603
0805
1206
2010
2512
0402
0603
1/8W
1/4W
3/4Wꢀꢀ
1W
50mΩꢀ≤ꢀRꢀ<ꢀ1Ω
Jumperꢀ<ꢀ5mΩ
100mΩꢀ≤ꢀRꢀ<ꢀ1Ω
1/8W
1/5Wꢀꢀ
1/4W
1/2Wꢀ
1W
±1%
±2%
±5%
See page 41,
tableꢀ"T.C.R.ꢀ-ꢀPTꢀseries"
PT
(PxR)^1/2ꢀ -55°C to 155°C
50mΩꢀ≤ꢀRꢀ<ꢀ1Ω
100mΩꢀ≤ꢀRꢀ<ꢀ1Ω
2W
1/6W
1/3W
1/2Wꢀ
1W
68mΩ
50m
Ω
Ω
ꢀ≤ꢀRꢀ≤ꢀ68m
Ω
Ω
±1%
±2%
±5%
PT
(Wide)
0815
(PxR)^1/2ꢀ -55°C to 155°C 25m
ꢀ≤ꢀRꢀ≤ꢀ50m
±100ꢀppm/°Cꢀ
Note: “ ! “ is the symbol for new product
9
Chip Resistors General Information
Specification overview
Power
rating
Max.
voltage
Operating
Temp. range
Resistance
range
Toler-
ance
Global part number
Series
Size
1206
T. C. R.
PR1206xKx07xxxxxx
PR1206xKx7Wxxxxxx
PR1206xKx47xxxxxx
PR2010xKx07xxxxxx
PR2010xKx7Wxxxxxx
PR2512xKx07xxxxxx
PR2512xKx7Wxxxxxx
PR2512xKx7Txxxxxx
PR2512DKx07xxxxxx
PR2512DKx7Wxxxxxx
PA2512xKF07xxxxL
PA2512xKF7WxxxxL
PA2512xKF7TxxxxL
PF0402xRx07xxxxxx
PF0402xRx7Wxxxxxx
PF0402xRx47xxxxxx
PF0603xRx07xxxxxx
PF0603xRx7Wxxxxxx
PF0603xRx7Txxxxxx
PF0603xRx47xxxxxx
PF0603xRx57xxxxxx
PF0805xRx07xxxxxx
PF0805xRx7Wxxxxxx
PF0805xRx7Txxxxxx
PF0805xRx47xxxxxx
PF1206xxx07xxxxxx
PF1206xxx7Wxxxxxx
PF1206xxx47xxxxxx
PF2010xKx07xxxxxx
PF2010xKx7Wxxxxxx
PF2512xKx07xxxxxx
PF2512xKx7Wxxxxxx
PF2512xKx7Txxxxxx
PF4527xKx07xxxxxx
PF4527xKx7Wxxxxxx
PF4527xKx7Txxxxxx
PF4527xKx7Wxxxxxx
PF4527xKx7Txxxxxx
PF0612xKx07xxxxxx
PF0612xKx7Wxxxxxx
PF0815xKx07xxxxxx
PF0815xKx7Wxxxxxx
PF0830xKx07xxxxxx
PF0830xKx7Wxxxxxx
1/4W
1/2W
1W
1mΩꢀ≤ꢀRꢀ≤ꢀ6mΩ
±1%
±2%
±5%
±50ꢀppm/°C
1/2W
1W
2010
2512
1mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
PR
(PxR)^1/2ꢀ -55°C to 170°C
1W
0.5mΩꢀ≤ꢀRꢀ≤ꢀ2mΩ ±200ꢀppm/°C
3mΩꢀ≤ꢀRꢀ≤ꢀ5mΩ ±100ꢀppm/°C
±1%
±2%
±5%
0.5m
0.5m
7m
Ω
ꢀ≤ꢀRꢀ≤ꢀ5m
Ω
2W
3W
Ωꢀ≤ꢀRꢀ≤ꢀ10mΩ
1W
±50ꢀppm/°C
±100ꢀppm/°C
±100ꢀppm/°C
Ω
ꢀ≤ꢀRꢀ≤ꢀ75m
Ω
±0.5%
2W
1W
±1%
±5%
PA
2512
0402
2W
(PxR)^1/2ꢀ -55°C to 155°C 1m
Ω
ꢀ≤ꢀRꢀ≤ꢀ10m
Ω
3W
!
!
!
1/16W
1/8W
1/4W
1/10W
1/5W
1/3W
2/5W
1/2W
1/8W
1/4W
1/3W
1/2W
1/4W (PxR)^1/2
1/2W
1W
-55°C to 155°C 10mΩ
≤ R ≤ 50mΩ
0603
0805
5mΩ
3mΩ
≤
R
≤
≤
100mΩ
≤
R
100mΩ
ꢀ100mΩ
±1%
±2%
±5%
±50ꢀppm/°C
±75ꢀppm/°C
±100ꢀppm/°C
PF
1206
2010
2512
3mΩꢀ≤ꢀRꢀ≤
-55°C to 170°C
1/2W
1W
5mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
6mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
1W
2W
3W
2W
4527
3W
5mΩꢀ≤ꢀRꢀ≤ꢀ1Ω
5W
±1%
±2%
±5%
±50ꢀppm/°C
±75ꢀppm/°C
±100ꢀppm/°C
3W
4527
0612
0815
0830
5mΩꢀ≤ꢀRꢀ≤ꢀ1Ω
5W
1W
1mΩꢀ≤ꢀRꢀ≤ꢀ300mΩ
2W
±1%
±2%
±5%
1/2W
PF
(Wide)
±75ꢀppm/°C
±100ꢀppm/°C
(PxR)^1/2 -55°C to 170°C 1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
1W
2W
3W
1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
10
Chip Resistors General Information
Specification overview
Power
rating
Max.
voltage
Operating
Temp. range
Resistance
range
Toler-
ance
Global part number
Series
Size
0612
T. C. R.
!
!
!
!
!
!
PE0612xKx07xxxxxx
PE0612xKx7Wxxxxxx
PE0815xKx07xxxxxx
PE0815xKx7Wxxxxxx
PE0830xKx07xxxxxx
PE0830xKx7Wxxxxxx
PH0805xRx07xxxxxx
PH1206xRx07xxxxxx
PE0402xRx07xxxxxx
PE0402xRx7Wxxxxxx
PE0402xRx47xxxxxx
PE0603xRx07xxxxxx
PE0603xRx7Wxxxxxx
PE0603xRx7Txxxxxx
PE0603xRx47xxxxxx
PE0603xRx57xxxxxx
PE0805xRx07xxxxxx
PE0805xRx7Wxxxxxx
PE0805xRx7Txxxxxx
PE0805xRx47xxxxxx
PE1206xxx07xxxxxx
PE1206xxx7Wxxxxxx
PE1206xxx47xxxxxx
PE2010xKx07xxxxxx
PE2010xKx7Wxxxxxx
PE2512xKx07xxxxxx
PE2512xKx7Wxxxxxx
PE2512xKx7Txxxxxx
PE4527xKx07xxxxxx
PE4527xKx7Wxxxxxx
PE4527xKx7Txxxxxx
PS0306xRx07xxxxxx
PS0306xRx7Wxxxxxx
PS0508xRx07xxxxxx
PS0508xRx7Wxxxxxx
PS0508xRx7Txxxxxx
1W
2W
1mΩꢀ≤ꢀRꢀ≤ꢀ300mΩ
±1%
±2%
±5%
1/2W
1W
PE
(Wide)
±75ꢀppm/°C
±100ꢀppm/°C
0815
0830
(PxR)^1/2 -55°C to 170°C 1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
2W
3W
±1%
±2%
±5%
0805
1206
4/5W
1W
PH
(PxR)^1/2 -55°C to 155°C 4mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
±75ꢀppm/°C
!
!
!
1/16W
1/8W
1/4W
1/10W
1/5W
1/3W
2/5W
1/2W
1/8W
1/4W
1/3W
0402
-55°C to 155°C 10mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
ꢀ±100ꢀppm/°C
0603
5mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
0805
3mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
±1%
±2%
±5%
PE
1/2W (PxR)^1/2
±50ꢀppm/°C
±75ꢀppm/°C
±100ꢀppm/°C
1/4W
1/2W
1W
-55°C to 170°C
1206
2010
2512
3mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
5mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
6mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
!
!
!
1/2W
1W
1W
2W
!
!
!
!
!
!
!
!
!
3W
2W
4527
0306
0508
3W
5mΩꢀ≤ꢀR < 1Ω
5W
1/8W
1/4W
1/8W
1/4W
-55°C to 155°C
-55°C to 170°C
±75ꢀppm/°C
±100ꢀppm/°C
10mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
PS
±1%
±5%
(PxR)^1/2
(4 Terminal)
1/2W
0.5mΩ,ꢀ0.75mΩ ±700ꢀppm/°C
1mΩꢀ≤ꢀRꢀ≤ꢀ2mΩ ±400ꢀppm/°C
3mΩꢀ≤ꢀRꢀ≤ꢀ5mΩ ±150ꢀppm/°C
1W
3W
0.5mΩ,ꢀ0.75mΩ
1mΩꢀ≤ꢀRꢀ≤ꢀ5mΩ
!
!
PS0612xKx07xxxxxx
PS1225xKx07xxxxxx
0612
1225
±75ꢀppm/°C
±100ꢀppm/°C
4mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
11
Note: “ ! “ is the symbol for new product
Chip Resistors General Information
Specification overview
Power
Max.
Operating
Resistance
range
Global part number Series Size
Tolerance
T. C. R.
rating voltage Temp. range
AR0402xR-07xxxxL
AR0603xR-07xxxxL
AR0805xR-07xxxxL
AR1206xR-07xxxxL
SR0402xR-07xxxxL
SR0402xR-7WxxxxL
SR0603xR-07xxxxL
SR0603xR-7WxxxxL
SR0805xR-07xxxxL
SR0805xR-7WxxxxL
SR1206xR-07xxxxL
SR1206xR-7WxxxxL
SR1218xK-07xxxxL
SR2010xK-07xxxxL
SR2512xK-07xxxxL
RV0603xR-07xxxxL
RV0805xR-07xxxxL
0402
0603
0805
1206
1/16Wꢀ
1/10Wꢀ
1/8Wꢀ
1/4Wꢀ
1/16W
1/8W
1/10W
1/5W
1/8Wꢀ
1/4W
1/4Wꢀ
1/2Wꢀ
1W
50V
50V
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ10M
Ω
Ω
±1%
±5%
1Ωꢀ≤ꢀRꢀ≤ꢀ10
10Ωꢀ<ꢀRꢀ≤ꢀ10M
Ω
Ω
±200ꢀppm/°C
±100ꢀppm/°Cꢀ
AR
-55°C to 155°C
Jumper < 50m
150V
200V
!
!
!
!
0402
0603
0805
1206
50V
50V
±5%
±10%
±20%
150V
200V
!
!
SR
-55°C to 155°C
1Ω
ꢀ≤ꢀRꢀ≤ꢀ100K
Ω
±200ꢀppm/°C
1218
2010
2512
0603
0805
200V
200V
200V
350V
400V
3/4W
1W
!
1/10W
1/8Wꢀ
10KΩꢀ≤ꢀRꢀ≤ꢀ1MΩ
±1%
±5%
100K
100K
4.7M
Ωꢀ≤ꢀRꢀ≤ꢀ10M
Ωꢀ≤ꢀRꢀ≤ꢀ27M
Ωꢀ≤ꢀRꢀ≤ꢀ16M
Ω
Ω
Ω
RV
TR
-55°C to 155°C
±200ꢀppm/°C
Max.: 10M
Max.: 27M
Ω
Ω
±1%
±5%
RV1206xR-07xxxxL
1206
1/4Wꢀ
500V
RV2512JK-07xxxxL
TR0402xR-07xxxxL
TR0603xR-07xxxxL
TR0805xR-07xxxxL
TR1206xR-07xxxxL
2512
0402
0603
0805
1206
1W
±5%
1/16Wꢀ
1/16Wꢀ
1/8Wꢀ
1/4Wꢀ
50V
-55°C to 125°C
-55°C to 155°C
-55°C to 125°C
+0/-10%ꢀ
+0/-20%ꢀ
+0/-30%
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ10
ꢀ<ꢀRꢀ≤ꢀ1M
ꢀ<ꢀRꢀ≤ꢀ10M
Ω
Ω
Ω
±200ꢀppm/°C
±100ꢀppm/°Cꢀ
±200ꢀppm/°C
1Ω
ꢀ≤ꢀRꢀ≤ꢀ10M
Ω
10
1M
Ω
150V
200V
Ω
1Ωꢀ≤ꢀ
Jumper<50mΩ
Rꢀ≤ꢀ10MΩ
±1%
±5%
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω -100/+350ꢀppm/°C
!
AF0201xR-07xxxxL
0201
1/20W
25V
10Ω ꢀ≤ꢀ10MΩ ±200ꢀppm/°C
<
R
AF0402xRx-07xxxxL
AF0603xRx-07xxxxL
AF0805xRx-07xxxxL
AF1206xRx-07xxxxL
0402
0603
0805
1206
1210
1218
2010
2512
1/16W
1/10W
1/8W
1/4W
1/2W
1W
50V
50V
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω ±200ꢀppm/°C
1Ωꢀ≤ꢀ
Jumper<50mΩ
R
ꢀ≤ꢀ22MΩ
Max:10MΩꢀ±1%ꢀ
Max:22MΩꢀ±5%
10Ω
10MΩ
<
<
R
R
ꢀ≤ꢀ10MΩ ±100ꢀppm/°C
ꢀ≤ꢀ22MΩ ±200ꢀppm/°C
150V
200V
200V
200V
200V
200V
50V
-55°C to 155°C
!
!
!
!
!
!
AF1210xRx-07xxxxL
AF1218xKx-07xxxxL
AF2010xKx-07xxxxL
AF2512xKx-07xxxxL
AF122-xR-07xxxxL
AF124-xR-07xxxxL
AC0402xR-07xxxxL
AC0603xR-07xxxxL
AC0805xR-07xxxxL
AC1206xR-07xxxxL
AC1210xR-07xxxxL
1Ωꢀ≤ꢀR
ꢀ≤ꢀ10MΩ
±1%
±5%
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω ±200ꢀppm/°C
Jumper<50mΩ
10Ω ꢀ≤ꢀ10MΩ ±100ꢀppm/°C
<
R
3/4W
1W
2*0402 1/16W
4*0402 1/16W
-55°C to 125°C
-55°C to 155°C
1Ωꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Ω
±1%
±5%
1
Ω
ꢀ≤ꢀRꢀ≤ꢀ10
Ω
Ω
±250ꢀppm/°C
±200ꢀppm/°C
Jumper < 50m
10Ωꢀ<ꢀRꢀ≤ꢀ1M
25V
0402
0603
0805
1206
1210
1/16Wꢀ
1/10Wꢀ
1/8Wꢀ
1/4Wꢀ
1/2W
50V
50V
1Ωꢀ≤ꢀRꢀ≤ꢀ10M
Ω
Ω
150V
200V
200V
Jumper < 50m
±1%
±5%
1
Ω
Ω
ꢀ≤ꢀRꢀ≤ꢀ10
Ω
±200ꢀppm/°C
±100ꢀppm/°Cꢀ
AC
AT
-55°C to 155°C
-55°C to 125°C
10
ꢀ<ꢀRꢀ≤ꢀ10M
Ω
1Ωꢀ≤ꢀRꢀ≤ꢀ1M
Ω
Ω
AC1218xK-07xxxxL
1218
1W
200V
Jumper < 50m
AC2010xK-07xxxxL
AC2512xK-07xxxxL
2010
2512
3/4W
200V
200V
1Ωꢀ≤ꢀRꢀ≤ꢀ10M
Ω
Ω
Jumper < 50m
1W
±0.3dB
±0.5dB
±1.0dB
±2.0dB
ATV321xR-07xxxxL
0404
40mW
50V
-1dB to -20dB
---
Note: " ! "ꢀisꢀtheꢀsymbolꢀforꢀnewꢀproduct
12
PTꢀ=ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.
PR/PA/PF/PH/PEꢀ=ꢀCurrentꢀsensorꢀ-ꢀlowꢀT.ꢀC.ꢀR.
PS = Current sensor - low T.C.R, 4 termination
TR = Trimmable
1Rꢀ =ꢀ1Ω
100Rꢀ=ꢀ100Ω
AR = NiAu termination
Mꢀ=ꢀ±75ꢀppm/°C
Gꢀ=ꢀ±200ꢀppm/°C
RCꢀ=ꢀThickꢀfilmꢀgeneralꢀpurpose
REꢀ=ꢀThickꢀfilmꢀprecisionꢀgrade
RTꢀ=ꢀThinꢀfilmꢀhighꢀprecisionꢀhighꢀstability
RLꢀ=ꢀThickꢀfilmꢀlowꢀohmic
Chip Resistors General Information
Ordering information - Global part number
Global part number - Single resistor (3)
R C
0 4 02
J
R
―
7 D 1 0 R
L
Series name (code 1-2)
Default codeꢀ(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
0U5ꢀ=ꢀ0.0005Ω
0R1ꢀ =ꢀ0.1Ω
10Rꢀ =ꢀ10Ω
SR = Surge
1Kꢀ =ꢀ1ꢀ000Ω
1Mꢀ =ꢀ1ꢀ000ꢀ000Ωꢀ
100Mꢀ=ꢀ100ꢀ000ꢀ000Ω
RV = High voltage
AF = Sulfur resistant
AC = Automotive grade
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
Size code (code 3-6)
(inchꢀ/ꢀmetric)
7D = 7 inch Dia. reel
2 x standard quantity
0100 = 0.4 x 0.2
0201 = 0.6 x 0.3
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0612 = 1.6 x 3.2
0805 = 2.0 x 1.25
0815 = 2.15 x 3.75
0830 = 2.0 x 7.5
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
4527 = 11.0 x 7.0
T. C. R. (code 9)
ꢀBꢀ=ꢀ±10ꢀppm/°Cꢀ(onꢀrequest)
Cꢀ=ꢀ±15ꢀppm/°Cꢀ(onꢀrequest)
Dꢀ=ꢀ±25ꢀppm/°C
ꢀEꢀ=ꢀ±50ꢀppm/°C
F =ꢀ±100ꢀppm/°C
Lꢀ=ꢀ±ꢀ150ꢀppm/°C
Pꢀ=ꢀ±ꢀ400ꢀppm/°C
Qꢀ=ꢀ±ꢀ700ꢀppm/°C
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Packing style (code 8 )
R = Paper tape reel
Tolerance (code 7)
W = ±0.05%
K = Embossed plastic tape reel
C = Bulk cassette
B = ±0.1%
S = ESD safe reel
C = ±0.25%
D = ±0.5%
F = ±1%
G = ±2%
ꢀJꢀ=ꢀ±5%ꢀꢀꢀ(forꢀRC/AR/AF/ACꢀJumperꢀordering)
ꢀKꢀ=ꢀ±10%ꢀ(forꢀTRꢀ=ꢀ0/-10%)
Mꢀ=ꢀ±20%ꢀ(forꢀTRꢀ=ꢀ0/-20%)
Nꢀ=ꢀ±30%ꢀ(forꢀTRꢀ=ꢀ0/-30%)
“―”ꢀꢀforꢀRL/PTꢀJumperꢀordering
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"
2. Letter L is system default code for ordering only
3. Global Part Number is the preferred clear text code for ordering Yageo and Phycomp branded products.
13
0R1ꢀ =ꢀ0.1Ω
RCꢀ=ꢀThickꢀfilmꢀgeneralꢀpurpose
RLꢀ=ꢀThickꢀfilmꢀlowꢀohmic
Lꢀ/ꢀZꢀ=ꢀDefaultꢀcode
Chip Resistors General Information
Ordering information - Global part number
Global part number - Power enhancement
R L 0 8 0 5
J
R
―
7 W 0 R 0 1 5
L
Series name (code 1-2)
Default code (code 17)
PTꢀ=ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.
PR/PA/PF/PEꢀ=ꢀCurrentꢀsensorꢀ-ꢀlowꢀT.ꢀC.ꢀR.
PS = Current sensor - low T.C.R, 4 termination
Resistance (code 12-16)
0U5ꢀ=ꢀ0.0005Ωꢀ
0R01ꢀ=ꢀ0.01Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
Taping reel (code 10-11)
07 = 7 inch Dia. reel
7W = 7 inch Dia. reel
2 x standard power type
7T = 7 inch Dia. reel
3 x standard power type
47 = 7 inch Dia. reel
4 x standard power type
57 = 7 inch Dia. reel
5 x standard power type
0306 = 0.8 x 1.6
0508 = 1.25 x 2.0
0612 = 1.6 x 3.2
0805 = 2.0 x 1.25
0815 = 2.15 x 3.75
1206 = 3.2 x 1.6
1225 = 3.2 x 6.35
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
4527 = 11.0 x 7.0
T. C. R. (code 9)
Eꢀ=ꢀ±50ꢀppm/°C
Mꢀ=ꢀ±75ꢀppm/°C
Tolerance (code 7)
F = ±1%
G = ±2%
J = ±5%
ꢀFꢀ=ꢀ±100ꢀppm/°C
Gꢀ=ꢀ±200ꢀppm/°C
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Global part number - Arrays & Networks
Y C 1 6
4
―
J
R
―
0 7 1 0 R
L
Series name (code 1-2)
Default code (code 17)
YC = Array & Network
(convexꢀ/ꢀflat)ꢀthickꢀfilm
TCꢀ=ꢀArrayꢀ(concave)ꢀthickꢀfilm
AFꢀ=ꢀSulfurꢀresistantꢀarrayꢀ(Convex)ꢀthickꢀfilm
Resistance (code 12-16)
0R = Jumper
0R1ꢀ =ꢀ0.1Ω
Size code (inch) (code 3-4)
10 = 0201 x 2 (0202)
0201 x 4 (0204)
1Rꢀ =ꢀ1Ω
10Rꢀ =ꢀ10Ω
100Rꢀ=ꢀ100Ω
12 = 0402 x 2 (0404)
0402 x 4 (0408)
1Kꢀ =ꢀ1ꢀ000Ω
1M = 100 000 000
15ꢀ=ꢀ10Pin/8Rꢀ(0612)
16 = 0603 x 2 (0606)
0603 x 4 (0612)
24 = 0602 x 8 (0616)
32 = 1206 x 4 (1224)
35ꢀ=ꢀ10Pin/8Rꢀ(1225)
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T.C.R. (code 9)
Number of resistors (code 5)
2 = 2 resistors
"―"ꢀ=ꢀBasedꢀonꢀspec.
4 = 4 resistors
8 = 8 resistors
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Schematic (code 6)
L = L-type (for YC358)
Tꢀ=ꢀT-typeꢀ(forꢀYC158/358)
M = Reverse type
Tolerance (code 7)
F = ±1%
J = ±5% (for Jumper ordering)
H = Reverse & Half type
“―”ꢀ=ꢀBasedꢀonꢀspec.
14
MR22 2512 (6432) Current sensor - low T. C. R.
MF22 2512 (6432) Current sensor - low T. C. R.
V321 0404 (1010) RF attenuator
Chip Resistors General Information
Ordering information - North America
Phycomp CTC ordering code - North America
Ordering example: 9C06031A10R0FKHFT = R-Chip 0603, 10R0, 1%, 5K reel
1-2
3-6
7-8
9-12
13 14 15-16 17
X X
X X X X X X X X X X
X
X X X X
Series name (code 1-2)
9Cꢀ=ꢀPhycompꢀthickꢀfilmꢀchipꢀresistors
9Tꢀ =ꢀPhycompꢀthinꢀfilmꢀchipꢀresistors
Packing style (code 17 )
T = 5K paper
3 = 10K paper
4 = 20K paper
5 = 4K blister
Size code (standard resistors, code 3-6)
0201 0201 (0603)
6 = 5K blister
0402 0402 (1005)
0603 0603 (1608)
7 = 50K paper
P = 25K bulk case
0805 0805 (2012)
1206 1206 (3216)
1210 1210 (3225)
Special coding (code 15-16)
HF = SnPb
1218 1218 (3248)
2010 2010 (5025)
PF = Lead-free
AF = NiAu
2512 2512 (6432)
AC34 0603 (1608) 4R concave array
AV34 0603 (1608) 4R convex array
AV22 0402 (1005) 2R convex array
AV24 0402 (1005) 4R convex array
AV28 0402 (1005) 8R convex array
RN31 10P8R in 1206 convex network
FR01 1206 (3216) Fusible
FR21 0603 (1608) Fusible
SR01 1206 (3216) Surge
VR01 1206 (3216) High voltage 5%
VR02 1206 (3216) High voltage 1%
VR11 0805 (2012) High voltage 5%
VR12 0805 (2012) High voltage 1%
VR21 2512 (6432) High voltage 5%
T. C. R. (code 14)
Cꢀ=ꢀ±10ꢀppm/°C
Dꢀ=ꢀ±15ꢀppm/°C
ꢀAꢀ=ꢀ±25ꢀppm/°C
ꢀBꢀ=ꢀ±50ꢀppm/°C
ꢀKꢀ=ꢀ±100ꢀppm/°C
ꢀLꢀ=ꢀ±200ꢀppm/°C
ꢀEꢀ=ꢀ±250ꢀppm/°C
Mꢀ=ꢀ±300ꢀppm/°C
Gꢀ=ꢀ±500ꢀppm/°C
ꢀFꢀ=ꢀ0/+500ꢀppm/°C
Rꢀ=ꢀ±600ꢀppm/°C
Qꢀ=ꢀ-100/+600ꢀppm/°C
ꢀPꢀ=ꢀ±750ꢀppm/°C
Hꢀ=ꢀ±1000ꢀppm/°C
ꢀ Iꢀ=ꢀ±1500ꢀppm/°C
ꢀJꢀ=ꢀ±2000ꢀppm/°C
Nꢀ=ꢀ±3000ꢀppm/°C
Power rating (code 7-8)
1A
1A
2A
3A
5A
7A
8A
12
1/16W
1/10W
1/8W
1/4W
1/2W
1/20W
1/32W
3/4W
0.063W
0.10W
0.125W
0.25W
0.5W
0.05W
0.03125W
0.75W
1W
(0402)
(0603)
(0805)
(1206)
(1210)
(0201)
(RN31)
(2010)
(1218/2512)
Tolerance (code 13)
E = ±0.01%
A = ±0.05%
B = ±0.1%; 0.2dB
C = ±0.25%; 0.3dB
D = ±0.5%; 0.5dB
F = ±1%; 1dB
G = ±2%; 2dB
J = ±5%
dB values apply to
attenuators
1W 1W
2W 2W
2W
Nꢀ=ꢀ0/-20%ꢀ
Rꢀ=ꢀ0/-30%
Right values apply to
trimmable resistors
Resistance value (code 9-12)
0R00 = Jumper
R0XXꢀꢀ<ꢀ0.1Ω
RXXXꢀ=ꢀ0.1Ωꢀ-ꢀ0.976Ω
XRXXꢀ=ꢀ1Ωꢀ-ꢀ9.76Ω
XXRXꢀ=ꢀ10Ωꢀ-ꢀ97.6Ω
XXX0ꢀ=ꢀ100Ωꢀ-ꢀ976Ω
XXX1 = 1K - 9.76K
XXX2 = 10K - 97.6K
XXX3 = 100K - 9.78K
XXX4 = 1M - 9.76M
XXX5 = 10M - 97.6M
XXX6ꢀ=ꢀ100M+
XXDB = 1 - 20DB
15
Chip Resistors General Information
IEC publication 63, SPQ, last digit of 12NC
Standardꢀofꢀvaluesꢀinꢀaꢀdecadeꢀaccordingꢀtoꢀ“IECꢀpublicationꢀ63”
10
11
12
13
15
16
18
20
22
24
27
30
E24 series
33
36
39
43
47
51
56
62
68
75
82
91
100
133
178
237
316
422
562
750
102
137
182
243
324
432
576
768
105
140
187
249
332
442
590
787
107
143
191
255
340
453
604
806
110
147
196
261
348
464
619
825
113
150
200
267
357
475
634
845
115
154
205
274
365
487
649
866
118
158
210
280
374
499
665
887
121
162
215
287
383
511
681
909
124
165
221
294
392
523
698
931
127
169
226
301
402
536
715
953
130
174
232
309
412
549
732
976
E96 series
Packing quantities
178mmꢀ/ꢀØ7”ꢀreel
254mmꢀ/ꢀØ10"ꢀreel
330mmꢀ/ꢀØ13"ꢀreel
Weight
Volume
mm3
0.0104
0.041
0.175
0.576
2.728
1.250
4.44
5.55
2.728
4.030
7.590
6.875
10.827
48.3
---
Size code
Tape width
Paper
20 000
10ꢀ000ꢀ/ꢀ20ꢀ000
10ꢀ000ꢀ/ꢀ20ꢀ000
5 000
Embossed
Paper
---
Paper
---
Embossed gꢀ/100pcs
0100
0201
8mm
8mm
8mm
8mm
8mm
8mm
8mm
12mm
8mm
8mm
12mm
12mm
12mm
24mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
12mm
12mm
12mm
---
---
---
---
0.007
0.016
0.058
0.192
0.862
0.450
1.71
---
50 000
50 000
20 000
---
0402
---
20 000
10 000
---
---
0603
---
---
0612
---
5 000
---
---
0805
4ꢀ000ꢀ/ꢀ5ꢀ000
---
10 000
---
20 000
---
---
0815
4 000
4 000
4 000
---
---
0830
---
---
---
---
4.594
0.862
1.471
2.703
2.273
3.704
16.225
0.052
0.099
0.100
0.112
0.100
0.281
0.311
0.376
0.833
1.030
0.855
0.885
2.703
3.333
1206
4ꢀ000ꢀ/ꢀ5ꢀ000
5 000
10 000
10 000
---
20 000
20 000
---
---
1210
---
1218
---
4 000
4ꢀ000ꢀ/ꢀ2ꢀ000
4 000
1 000
---
---
2010
---
---
---
16 000
---
2512
---
---
---
4527
---
---
---
---
YC102
YC104
AF/YC122
TC122
ATV321
AF/YC124
TC124
YC162
YC164
TC164
YC158
YC248
YC324
YC358
10 000
10 000
10 000
10 000
10 000
10 000
10 000
5 000
---
---
---
---
---
---
---
---
---
---
50 000
50 000
---
---
---
---
---
---
---
--
---
---
---
---
20 000
20 000
--
40 000
40 000
---
---
---
---
---
---
---
---
---
5 000
---
10 000
10 000
---
20 000
20 000
20 000
---
---
---
5 000
---
---
---
5 000
---
---
---
5 000
4 000
4 000
4 000
---
---
---
---
---
---
---
---
---
---
---
---
---
12NC Ordering information
Theꢀfirstꢀ8ꢀorꢀ9ꢀdigitsꢀofꢀtheꢀ12ꢀdigitꢀcatalogueꢀnumberꢀareꢀgivenꢀunderꢀsectionꢀ
“Phycompꢀworldwideꢀ-ꢀTraditionalꢀtype”ꢀonꢀfollowingꢀpages.ꢀ
The remaining 4 or 3 digits represent the resistance value with the last digit
indicating the multiplier as shown in table on the right.
Last digit of 12NC
Resistance
0.001ꢀtoꢀ0.0976ꢀΩ
0.1ꢀtoꢀ0.976ꢀΩ
1ꢀtoꢀ9.76ꢀΩ
Last digit
0
7
8
9
1
2
3
4
5
6
Example:
ꢀ 0.001ꢀΩꢀ =ꢀ 0010ꢀorꢀ010
ꢀ 0.02ꢀΩꢀ =ꢀ 0200ꢀorꢀ200
10ꢀtoꢀ97.6ꢀΩ
100ꢀtoꢀ976ꢀΩ
1ꢀtoꢀ9.76ꢀkΩ
ꢀ
ꢀ
ꢀ
0.3ꢀΩꢀ =ꢀ 3007ꢀorꢀ307
1ꢀΩꢀ =ꢀ 1008ꢀorꢀ108
33ꢀkΩꢀ =ꢀ 3303ꢀorꢀ333
10ꢀtoꢀ97.6ꢀkΩ
100ꢀtoꢀ976ꢀkΩ
1ꢀtoꢀ9.76ꢀMΩ
10ꢀtoꢀ97.6ꢀMΩ
ꢀ 10ꢀMΩꢀ =ꢀ 1006ꢀorꢀ106
16
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Features
•ꢀ Extremely thin and light
•ꢀ Highly reliable multilayer electrode construction
•ꢀ Compatible with all soldering processes
•ꢀ Highly stable in auto-placement surface mounting applications
•ꢀ Barrier layer end termination
•ꢀ Jumper is available
•ꢀ Available in 8mm tape & reel per IEC 60286-3 (EIA -RS 481)
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
100
resistive layer
80
60
inner electrode
RC0402-
RC2512
40
20
RC0100-
RC0201
termination (Ni / matte tin)
155
inner electrode
125
ceramic substrate
-55
-40
-20
0
20
40
60
80
100 120 140 160
Ambient Temperature ( C)
Dimensions
Type
L
W
H
I1
I2
RC01005
RC0201
RC0402
RC0603
RC0805
RC1206
RC1210
RC1218
RC2010
0.40 ±0.02
0.60 ±0.03
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
0.20 ±0.02
0.30 ±0.03
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
4.60 ±0.10
2.50 ±0.15
3.10 ±0.15
3.10 ±0.15
0.13 ±0.02
0.23 ±0.03
0.35 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.10 ±0.03
0.10 ±0.05
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45 ±0.15
0.45 ±0.20
0.45 ±0.15
0.60 ±0.20
0.60 ±0.20
0.10 ±0.03
0.15 ±0.05
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
1.15 ±0.20
I1
I1
H
I2
I2
W
L
unit: mm
RC2512 (1W) 6.35 ±0.10
RC2512 (2W) 6.35 ±0.10
17
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Electrical characteristics
Power Operating Temp.
T. C. R.
(ꢀppm/°C)ꢀ
Jumper criteria
(unit: A)
Type
MWV RCOV DWV
Resistance range & tolerance
P70
range
E24 ±1%, 5% 1Ω≤R≤1MΩꢀ
Jumper <50mΩꢀ
1Ω≤R≤10Ωꢀ -200~600 Rated current 0.5
RC01005 1/32Wꢀ -55°Cꢀtoꢀ+125°Cꢀ 15V 30V 30V
10Ω≤R≤1MΩꢀ ±250
Max. current 1.0
E24 ±5% 1Ω≤R≤10MΩ
E24/E96ꢀ±1% 1Ω≤R≤10MΩ
E24/E96ꢀ
±0.1%,±0.5% 10Ω≤R≤1MΩ
Jumper <50mΩ
10Ω<R≤10MΩ ±200
Rated current 0.5
RC0201 1/20Wꢀ -55°Cꢀtoꢀ+125°Cꢀ 25V 50V 50V
1Ω≤R≤10Ω -100/+350 Max. current 1.0
E24 ±5% 1Ω≤R≤22MΩ
E24/E96ꢀ±1% 1Ω≤R≤10MΩ
E24/E96ꢀ
±0.1%,±0.5% 10Ω≤R≤1MΩ
Jumper <50mΩ
1Ω≤R≤10Ω ±200
Rated current 1.0
RC0402 1/16Wꢀ -55°Cꢀtoꢀ+125°Cꢀ 50V 100V 100V
10Ω<R≤10MΩꢀ ±100
Max. current 2.0
10MΩ<R≤22MΩꢀ ±200
E24 ±5% 1Ω≤R≤22MΩ
E24/E96ꢀ±1% 1Ω≤R≤10MΩ
E24/E96ꢀ
±0.1%,±0.5% 10Ω≤R≤1MΩ
Jumper <50mΩ
1Ω≤R≤10Ω ±200
Rated current 1.0
1/10Wꢀ -55°Cꢀtoꢀ+125°Cꢀ 50V 100V 100V
10Ω<R≤10MΩꢀ ±100
Max. current 2.0
10MΩ<R≤22MΩ ±200
RC0603
E24 ±5% 1Ω≤R≤1MΩ
E24/E96ꢀ±1% 1Ω≤R≤1MΩ
1/5W -55°Cꢀtoꢀ+125°C 50V 100V 100V
1Ω≤R≤1MΩ ±200
--
--
E24 ±5% 1Ω≤R≤22MΩ
E24/E96ꢀ±1% 1Ω≤R≤10MΩ
E24/E96ꢀ
±0.1%,±0.5% 10Ω≤R≤1MΩ
Jumper <50mΩ
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩꢀ ±100
10MΩ<R≤22MΩꢀ ±200
Rated current 2.0
Max. current 5.0
1/8Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 150V 300V 300V
RC0805
E24 ±5% 1Ω≤R≤1MΩ
E24/E96ꢀ±1% 1Ω≤R≤1MΩ
1/4Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 150V 300V 300V
1Ω≤R≤1MΩ ±200
--
--
E24 ±5% 10Ω≤R≤22MΩꢀ
E24/E96ꢀ±1%ꢀ 1Ω≤R≤10MΩꢀ
E24/E96ꢀ
±0.1%,±0.5% 10Ω≤R≤1MΩꢀ 10MΩ<R≤22MΩꢀ ±200
Jumper <50mΩꢀ
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩꢀ ±100
Rated current 2.0
Max. current 10.0
1/4Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 200V 400V 500V
RC1206
E24 ±5% 1Ω≤R≤1MΩꢀ
1Ω≤R≤1MΩꢀ ±200
1/2Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 200V 400V 500V
--
--
E24/E96ꢀ±1%ꢀ 1Ω≤R≤1MΩꢀ
E24 ±5% 1Ω≤R≤22MΩꢀ
E24/E96ꢀ±1% 1Ω≤R≤10MΩꢀ
E24/E96ꢀ±0.5% 10Ω≤R≤1MΩꢀ
Jumper <50mΩꢀ
Rated current 2.0
Max. current 10.0
RC1210 1/2Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 200V 500V 500V
E24 ±5% 1Ω≤R≤1MΩꢀ
E24/E96ꢀ±1% 1Ω≤R≤1MΩꢀ
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩꢀ ±100
Rated current 6.0
Max. current 10.0
RC1218 1W -55°Cꢀtoꢀ+155°Cꢀ 200V 500V 500V
RC2010 3/4Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 200V 500V 500V
E24/E96ꢀ
±0.1%,±0.5% 10Ω≤R≤1MΩꢀ
10MΩ<R≤22MΩꢀ ±200
Jumper <20mΩꢀ
E24 ±5% 1Ω≤R≤22MΩꢀ
E24/E96ꢀ±1% 1Ω≤R≤10MΩꢀ
E24/E96ꢀ
±0.1%,±0.5% 10Ω≤R≤1MΩꢀ
Jumper <50mΩꢀ
Rated current 2.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
1W -55°Cꢀtoꢀ+155°Cꢀ 200V 500V 500V
RC2512
E24 ±5% 1Ω≤R≤150Ωꢀ
1Ω≤R≤150Ωꢀ ±200
2W -55°Cꢀtoꢀ+155°Cꢀ 200V 400V 500V
--
--
E24/E96ꢀ±1%ꢀ 1Ω≤R≤150Ωꢀ
18
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Environmental characteristics
Performance test
Test method
Procedure
Requirements
01005:ꢀꢀ±(3%ꢀ+0.05Ω)
ꢀ
<ꢀ100mΩꢀforꢀjumper
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
Others:ꢀ±(1%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
ꢀ
ꢀ
±(3%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ100mΩꢀforꢀjumper
01005:ꢀ ±(1%ꢀ+0.05Ω)
ꢀ
<ꢀ50mΩꢀforꢀjumper
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
High temperature exposure
Moisture resistance
Thermal shock
Others:ꢀ±(1%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
ꢀ
ꢀ
±(2%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ50mΩꢀforꢀjumper
01005:ꢀ ±(2.0%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
Others:ꢀ±(0.5%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
ꢀ
MIL-STD-202G-
method 106F
ꢀ
ꢀ
±(2%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ100mΩꢀforꢀjumper
01005:ꢀ ±(1%ꢀ+0.05Ω)
ꢀ
<ꢀ50mΩꢀforꢀjumper
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Others:ꢀ±(0.5%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
ꢀ
ꢀ
±(1%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ50mΩꢀforꢀjumper
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)
No visible damage
Wetting
01005:ꢀ ±(1%ꢀ+0.05Ω)
Solderability
ꢀ
<ꢀ50mΩꢀforꢀjumper
Resistance to
soldering heat
MIL-STD-202G-
method 210F
Lead-free solder, 260°C, 10 seconds
immersion time
Others:ꢀ±(0.5%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
ꢀ
ꢀ
±(1%ꢀ+0.05ꢀΩ)ꢀforꢀ5%ꢀtol.
<ꢀ50mΩꢀforꢀjumper
No visible damage
01005:ꢀ ±(2%ꢀ+0.05Ω)
ꢀ
<ꢀ50mΩꢀforꢀjumper
2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room
temperature
MIL-R-55342D-
para 4.7.5
Others:ꢀ±(1%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
ꢀ
ꢀ
Short time overload
±(2%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ50mΩꢀforꢀjumper
No visible damage
19
0100 = 0.4 x 0.2
0201 = 0.6 x 0.3
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
RCꢀ=ꢀGeneralꢀpurposeꢀthickꢀfilm
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: RC0402JR-07100KL
R C 0 4 0 2
J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10Rꢀ =ꢀ10Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
7D = 7 inch Dia. reel,
2 x standard quantity
7W = 7 inch Dia. reel,
2 x standard power
Tolerance (code 7)
B = ±0.1%
T. C. R. (code 9)
D = ±0.5%
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
F = ±1%
J = ±5% (for Jumper ordering)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
C = Bulk cassette
S = ESD safe reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
20
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Phycomp worldwide - Traditional type
Generalꢀpurposeꢀthickꢀfilmꢀ/ꢀRCꢀseries
Size: inch (mm)
Power
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
1/20ꢀW
1/16ꢀW
1/10ꢀW
1/8ꢀW
Tolerance
Resistance
Packing
+5%
+1%
+5%
+1%
+5%
E24
+1%
+5%
E24
+1%
E24
E24ꢀ/ꢀE96
E24
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
paper tape
paper tape
paper tape
paper tape
Quantity
---
---
---
---
2322 702 60...L 2322 704 6.…L 2322 730 61...L 2322 734 6.…L
5 000
10 000
20 000
50 000
5 000
2322 803 70...L 2322 806 7.…L 2322 705 70...L 2322 706 7.…L 2322 702 70...L 2322 704 7.…L 2322 730 71...L 2322 734 7.…L
2322 806 80...L 2322 806 8.…L --- --- 2322 702 81...L 2322 704 8.…L 2322 730 81...L 2322 734 8.…L
2322 803 60...L 2322 806 6.…L 2322 705 87...L 2322 706 8.…L
---
---
---
---
---
---
---
---
---
---
---
---
Jumper
---
---
---
---
---
---
---
---
---
---
2322 702 96001L
2322 702 97001L
2322 702 92002L
---
2322 730 91002L
2322 730 91003L
2322 730 92002L
---
2322 803 91001L
2322 705 91001L
---
10 000
20 000
50 000
---
---
2322 705 91007L
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp worldwide - Traditional type
Generalꢀpurposeꢀthickꢀfilmꢀ/ꢀRCꢀseries
Size: inch (mm)
Power
1206 (3216)
1210 (3225)
1218 (3248)
2010 (5025)
2512 (6432)
1/4ꢀW
1/2ꢀW
1 W
3/4ꢀW
1 W
Tolerance
Resistance
Packing
+5%
+1%
+5%
+1%
+5%
E24
+1%
+5%
E24
+1%
+5%
E24
+1%
E24
E24ꢀ/ꢀE96
E24
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
paper tape
paper tape
blister tape
blister tape
blister tape
Quantity
---
---
---
---
2322 735 64...L 2322 735 7.…L 2322 760 60...L 2322 761 6.…L 2322 762 60...L 2322 763 6.…L
4 000
5 000
2322 711 61...L 2322 724 6.…L 2390 735 70...L 2390 735 3.…L
2322 711 51...L 2322 724 7.…L --- ---
2322 711 81...L 2322 724 8.…L 2390 735 71...L 2390 735 5.…L
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
10 000
20 000
4 000
---
---
---
Jumper
---
---
---
---
---
---
---
---
---
---
2322 735 90007L
2322 760 90003L
2322 762 90000L
2322 711 91032L
2322 711 91005L
2322 711 92004L
2390 735 90001L
---
---
---
---
---
---
---
---
---
5 000
---
---
10 000
20 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
21
Chip Resistors Selection Charts
RC - Thick film high ohmic chip resistors, 0805 / 1206
Features
•ꢀ Reducedꢀsizeꢀofꢀfinalꢀequipment
•ꢀ Low assembly costs
•ꢀ Higher component and equipment reliability
•ꢀ Highꢀohmicꢀvaluesꢀupꢀtoꢀ100MΩ
•ꢀ Suitable for power supplies in small equipment
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
100
80
60
40
resistive layer
inner electrode
20
termination (Ni / matte tin)
155
inner electrode
-55
-40
-20
0
20
40
60
80
100 120 140 160
ceramic substrate
Ambient Temperature ( C)
Dimensions
I1
I1
Type
L
W
H
I1
I2
RC0805
RC1206
2.00 ±0.10
3.10 ±0.10
1.25 ±0.10
1.60 ±0.10
0.50 ±0.10
0.55 ±0.10
0.35 ±0.20
0.45 ±0.20
0.35 ±0.20
0.40 ±0.20
H
I2
I2
W
L
unit: mm
22
Chip Resistors Selection Charts
RC - Thick film high ohmic chip resistors, 0805 / 1206
Electrical characteristics
Power
P70
Operating Temp.
Type
MWV
RCOV
DWV
Resistance range & tolerance
T. C. R.
range
RC0805
RC1206
1/8W
1/4W
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
150V
200V
300V
400V
300V
500V
E24 ±5%, ±10%, ±20% 24MΩꢀ≤ꢀRꢀ≤ꢀ100MΩ
±300ꢀppm/°C
Note: Seeꢀpageꢀ11ꢀforꢀorderingꢀcode.ꢀForꢀmoreꢀdetailed,ꢀpleaseꢀcontactꢀourꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregion.
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(2%ꢀ+0.05Ω)
±(1%ꢀ+0.05Ω)
±(2%ꢀ+0.05Ω)
±(1%ꢀ+0.05Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
High temperature exposure
Moisture resistance
Thermal shock
MIL-STD-202G-
method 106F
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhoursꢀ(methodꢀ
106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%ꢀcovered)
No visible damage
J-STD-002B
testB
Wetting
Solderability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(1%ꢀ+0.05Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage whichever is
less for 5 seconds at room temperature
±(2%ꢀ+0.05Ω)
No visible damage
Short time overload
23
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Features
•ꢀ Narrow tolerance
•ꢀ Low T. C. R.
•ꢀ Highly reliable multilayer electrode construction
•ꢀ Compatible with all soldering processes
•ꢀ Suitable for auto-placement surface mounting applications
•ꢀ Available in 8mm tape & reel per EIA RS481
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
100
resistive layer
80
60
40
inner electrode
termination (Ni / matte tin)
20
155
inner electrode
-55
-40
-20
0
20
40
60
80
100 120 140 160
ceramic substrate
Ambient Temperature ( C)
Dimensions
I1
I1
Type
L
W
H
I1
I2
RE0402
RE0603
RE0805
RE1206
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
H
I2
I2
W
L
unit: mm
24
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Electrical characteristics
Power
Type
P70
Operating Temp. range
MWV
RCOV
DWV
Resistance range & tolerance
T. C. R.
RE0402
RE0603
RE0805
RE1206
1/16W
1/10W
1/8W
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
50V
50V
100V
100V
300V
400V
100V
100V
300V
500V
E24/E96ꢀ±0.1%,±0.5%,ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
±50ꢀppm/°C
150V
200V
1/4W
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(3%ꢀ+0.05Ω)
±(3%ꢀ+0.05Ω)
±(3%ꢀ+0.05Ω)
±(1%ꢀ+0.05Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
High temperature exposure
Moisture resistance
Thermal shock
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 106F
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
IPC/JEDECJ-
STD-002B
testB
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Wellꢀtinnedꢀ(≥95%ꢀcovered)
No visible damage
Wetting
Solderability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(0.5%+ꢀ0.05Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
±(1%+ꢀ0.05Ω)ꢀ
No visible damage
Short time overload
25
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
100Rꢀ=ꢀ100Ω
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
100Kꢀ=ꢀ100KΩ
REꢀ=ꢀThickꢀfilmꢀprecisionꢀgrade
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: RE0603DRE07100KL
R E 0 6 0 3 D R
E
0 7 1 0 0 K
L
Series name (code 1-2)
Default code(1/2) (code 17)
Resistance (code 12-16)
10Rꢀ =ꢀ10Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
Tolerance (code 7)
B = ±0.1%
D = ±0.5%
T. C. R. (code 9)
F = ±1%
Eꢀ=ꢀ±50ꢀppm/°C
Packing style (code 8 )
R = Paper tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
ꢀ
3.ꢀREꢀseriesꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
26
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Features
•ꢀ High precision - High stability
•ꢀ LowꢀT.ꢀC.ꢀR.ꢀ/ꢀlowꢀnoise
•ꢀ High accuracy (±0.05%, ±0.1%, ±0.25%, ±0.5%, ±1%)
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
protective glass
resistive layer
70
100
80
60
inner electrode
inner electrode
RT0402-
RT1206
40
20
RT1210-RT2512
ceramic substrate
155
125
-55
-40
-20
0
20
40
60
80
100 120 140 160
Ambient Temperature (°C)
Dimensions
I1
I1
Type
L
W
H
I1
I2
RT0402
RT0603
RT0805
RT1206
RT1210
RT2010
RT2512
1.00 ±0.10
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
6.35 ±0.10
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
2.50 ±0.15
3.20 ±0.15
0.30 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.50 ±0.20
0.60 ±0.20
0.60 ±0.20
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
0.50 ±0.20
H
I2
I2
W
L
unit: mm
27
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Electrical characteristics
Power
P70
Operating Temp.
range
Type
MWV
RCOV
DWV
Resistance range & tolerance
10Ωꢀ≤ꢀRꢀ≤ꢀ121KΩ
T. C. R.
RT0402 1/16W
RT0603 1/10W
50V
75V
100V
150V
300V
400V
400V
400V
400V
75V
100V
200V
300V
400V
400V
400V
5.1Ωꢀ≤ꢀRꢀ≤ꢀ681KΩ
5.1Ωꢀ≤ꢀRꢀ≤ꢀ1.5MΩ
5.1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+125°C
E24/E96ꢀ
±0.05%, ±0.1%,
±0.25%, ±0.5%, ±1%
±50ꢀppm/°C
±25ꢀppm/°C
±15ꢀppm/°C
±10ꢀppm/°C
RT0805
RT1206
RT1210
RT2010
RT2512
1/8W
1/4W
1/4W
1/2W
3/4W
150V
200V
200V
200V
200V
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(0.5%+ꢀ0.05Ω)ꢀforꢀRT
±(0.5%+ꢀ0.05Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
High temperature exposure
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhoursꢀ
(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwith
ꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 106F
Moisture resistance
Thermal shock
±(0.5%+ꢀ0.05Ω)
±(0.5%+ꢀ0.05Ω)
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
±(0.5%+ꢀ0.05Ω)ꢀforꢀRT
No visible damage
Short time overload
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(0.5%ꢀ+0.05Ω)ꢀ
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
Solderability
Wetting
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Wellꢀtinnedꢀ(≥95%ꢀ
covered)
No visible damage
J-STD-002B
testB
28
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
C = ±0.25%
D = ±0.5%
RTꢀ=ꢀHighꢀprecisionꢀ-ꢀHighꢀstabilityꢀthinꢀfilm
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: RT0603DRE07100KL
R T 0 6 0 3 D R
E
0 7 1 0 0 K
L
Series name (code 1-2)
Default codeꢀ(1/2) (code 17)
Resistance (code 12-16)
10Rꢀ =ꢀ10Ω
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
10Kꢀ =ꢀ10KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
Tolerance (code 7)
W = ±0.05%
B = ±0.1%
T. C. R. (code 9)
ꢀBꢀ=ꢀ±10ꢀppm/°Cꢀ(onꢀrequest)
Cꢀ=ꢀ±15ꢀppm/°Cꢀ(onꢀrequest)
Dꢀ=ꢀ±25ꢀppm/°C
ꢀEꢀ=ꢀ±50ꢀppm/°C
F = ±1%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
29
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Phycomp worldwide - Traditional type
High precision - High stability
Size: inch (mm)
Power
0402 (1005)
0603 (1608)
1/16ꢀW
1/10ꢀW
Tolerance
Resistance
Packing
±1%
±0.5%
±0.25%
±0.1%
±1%
±0.5%
±0.25%
±0.1%
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
paper tape
paper tape
Quantity
---
---
---
---
---
---
---
---
2390 604 7.…L 2390 604 6.…L 2390 604 5.…L 2390 604 4.…L
2390 404 7.…L 2390 404 6.…L 2390 404 5.…L 2390 404 4.…L
TC25 5 000
TC50 5 000
TC25 10 000
TC50 10 000
2390 607 7.…L 2390 607 6.…L 2390 607 5.…L 2390 607 4.…L
2390 407 7.…L 2390 407 6.…L 2390 407 5.…L 2390 407 4.…L
---
---
---
---
---
---
---
---
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp worldwide - Traditional type
High precision - High stability
Size: inch (mm)
Power
0805 (2012)
1206 (3216)
1210 (3225)
1/8ꢀW
1/4ꢀW
1/2ꢀW
Tolerance
Resistance
Packing
±1%
±0.5%
±0.25%
±0.1%
±1%
±0.5%
±0.25%
±0.1%
±1%
±0.5%
±0.25%
±0.1%
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
paper tape
paper tape
paper tape
Quantity
2390 801 7.…L 2390 801 6.…L 2390 801 5....L 2390 801 4....L 2390 811 7....L 2390 811 6....L 2390 811 5....L 2390 811 4....L 2390 812 7....L 2390 812 6....L 2390 812 5....L 2390 812 4....L
2390 701 7.…L 2390 701 6.…L 2390 701 5....L 2390 701 4....L 2390 711 7....L 2390 711 6....L 2390 711 5....L 2390 711 4....L 2390 712 7....L 2390 712 6....L 2390 712 5....L 2390 712 4....L
2390 601 7.…L 2390 601 6....L 2390 601 5....L 2390 601 4....L 2390 611 7....L 2390 611 6....L 2390 611 5....L 2390 611 4....L 2390 612 7....L 2390 612 6....L 2390 612 5....L 2390 612 4....L
2390 401 7.…L 2390 401 6....L 2390 401 5....L 2390 401 4....L 2390 411 7....L 2390 411 6....L 2390 411 5....L 2390 411 4....L 2390 412 7....L 2390 412 6....L 2390 412 5....L 2390 412 4....L
TC10 5 000
TC15 5 000
TC25 5 000
TC50 5 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp worldwide - Traditional type
High precision - High stability
Size: inch (mm)
Power
2010 (5025)
2512 (6432)
1/2ꢀW
3/4ꢀW
Tolerance
Resistance
Packing
±1%
±0.5%
±0.25%
±0.1%
±1%
±0.5%
±0.25%
±0.1%
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
blister tape
blister tape
Quantity
2390 815 7....L 2390 815 6....L 2390 815 5....L 2390 815 4....L 2390 818 7....L 2390 818 6....L 2390 818 5....L 2390 818 4....L
2390 731 7....L 2390 731 6....L 2390 731 5....L 2390 731 4....L 2390 735 7....L 2390 735 6....L 2390 735 5....L 2390 735 4....L
2390 615 7....L 2390 615 6....L 2390 615 5....L 2390 615 4....L 2390 618 7....L 2390 618 6....L 2390 618 5....L 2390 618 4....L
2390 415 7....L 2390 415 6....L 2390 415 5....L 2390 415 4....L 2390 418 7....L 2390 418 6....L 2390 418 5....L 2390 418 4....L
TC10 4 000
TC15 4 000
TC25 4 000
TC50 4 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 13 for details.
Thinꢀfilmꢀproductꢀrangeꢀagainstꢀtoleranceꢀ/ꢀT.ꢀC.ꢀR.ꢀ(orderingꢀcode)
Tolerance
±0.05% (W)
±0.1% (B)
±0.25% (C)
±0.5% (D)
±1% (F)
T.ꢀC.ꢀR.ꢀ(ppm/°C) ±10 (B) ±15 (C) ±25 (D) ±10 (B) ±15 (C) ±25 (D) ±50 (E) ±10 (B) ±15 (C) ±25 (D) ±50 (E) ±25 (D) ±50 (E) ±50 (E)
--
--
--
10R - 100K 10R - 100K 10R - 121K 10R - 121K 10R - 100K 10R - 100K 10R - 121K 10R - 121K 10R - 121K 10R - 121K 10R - 121K
RT0402
RT0603
RT0805
RT1206
RT1210
RT2010
RT2512
1K - 47K
1K - 47K
1K - 47K 10R - 100K 10R - 100K 10R - 681K 10R - 681K 10R - 100K 10R - 100K 10R - 681K 5R1 - 681K 10R - 681K 5R1 - 681K 5R1 - 681K
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1.5M 10R - 1.5M 10R - 100K 10R - 100K 10R - 1.5M 5R1 - 1.5M 10R - 1.5M 5R1 - 1.5M 5R1 - 1.5M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1.5M 10R - 1.5M 10R - 100K 10R - 100K 10R - 1.5M 5R1 - 1.5M 10R - 1.5M 5R1 - 1.5M 5R1 - 1.5M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 100K 10R - 100K 10R - 1M 5R1 - 1M 10R - 1M 5R1 - 1M 5R1 - 1M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 1M 10R - 1M 10R - 1M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 1M 10R - 1M 10R - 1M
30
Chip Resistors Selection Charts
YC/TC - Thick film array / network chip resistors
Features
•ꢀ Integrated discrete chip resistors from 2 to 8 pcs
•ꢀ Moreꢀefficientꢀinꢀpickꢀ&ꢀplaceꢀapplication
•ꢀ Low assembly costs
•ꢀ Reducedꢀsizeꢀofꢀfinalꢀequipment
•ꢀ Higher component and equipment reliability
Schematics
Dimensions
Type
Hꢀ/ꢀH1
B
P
L
T
W1
W2
T
YC102
H: 0.35 ±0.10
0.20 ±0.10 0.50 ±0.05 0.80 ±0.10 0.35 ±0.10 0.15 ±0.10 0.60 ±0.10
W1
0.40
YC104
H: 0.20 ±0.10
0.15 ±0.05
1.40 ±0.10 0.35 ±0.10 0.15 ±0.10 0.60 ±0.10
W2
(Typical)
Side view for all types
YC122 H:ꢀ0.21ꢀ+0.10/-0.05 0.20 ±0.10 0.67 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.10 1.00 ±0.10
H: 0.45 ±0.05
H1: 0.30 ±0.05
YC124
YC162
YC164
YC248
0.20 ±0.15 0.50 ±0.05 2.00 ±0.10 0.45 ±0.10 0.30 ±0.15 1.00 ±0.10
0.30 ±0.10 0.80 ±0.05 1.60 ±0.10 0.40 ±0.10 0.30 ±0.10 1.60 ±0.10
0.30 ±0.15 0.80 ±0.05 3.20 ±0.15 0.60 ±0.10 0.30 ±0.15 1.60 ±0.15
0.30 ±0.15 0.50 ±0.05 4.00 ±0.20 0.45 ±0.10 0.40 ±0.15 1.60 ±0.15
YC 102/122/162
YC 104/124/164/324
158/358/248
H: 0.30 ±0.10
H
H: 0.65 ±0.05
H1: 0.50 ±0.15
B
H: 0.45 ±0.05
H1: 0.30 ±0.05
P
L
H: 1.10 ±0.15
H1: 0.90 ±0.15
YC324
TC122
0.50 ±0.20 1.27 ±0.05 5.08 ±0.20 0.60 ±0.10 0.50 ±0.15 3.20 ±0.20
0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.15 1.00 ±0.10
H: 0.30 ±0.05
TC 122
H
TC 124/164
TC122H
TC122M
TC124
H : 0.40 ±0.05
H : 0.30 ±0.05
H: 0.30 ±0.10
H : 0.30 ±0.05
H : 0.30 ±0.05
H: 0.60 ±0.15
0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10
1.00 ±0.10
--
H
P
a
0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.15 1.00 ±0.10
0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10 0.25 ±0.10 1.00 ±0.10
B
B
TC124H
TC124M
TC164
0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10
1.00 ±0.10
--
0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10 0.25 ±0.10 1.00 ±0.10
0.30 ±0.15 0.80 ±0.05 3.20 ±0.15 0.60 ±0.10 0.30 ±0.15 1.60 ±0.15
a
P
L
H: 0.45±0.05
H1: 0.32±0.05
L
YC158
YC358
0.30 ±0.15 0.64 ±0.05 3.20 ±0.20 0.60 ±0.10 0.35 ±0.15 1.60 ±0.15
0.50 ±0.15 1.27 ±0.05 6.40 ±0.20 0.60 ±0.10 0.50 ±0.15 3.20 ±0.20
unit: mm
H: 1.10 ±0.15
H1: 0.90 ±0.15
Note: 1.ꢀYC104ꢀisꢀflatꢀtype
31
Chip Resistors Selection Charts
YC/TC - Thick film array / network chip resistors
Electrical characteristics
Power Operating Temp.
Jumper criteria
(unit: A)
Type
MWV RCOV DWV Resistance range & tolerance
T. C. R.
P70
range
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
30V 30V E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 0.5
Max. current 1.0
YC102 1/32W -55°Cꢀtoꢀ+125°C 15V
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
YC104 1/32W -55°Cꢀtoꢀ+125°C 12.5V 25V 25V E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 0.5
Max. current 1.0
±200ꢀppm/°C
E24 ±5% 1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
YC122 1/16W -55°Cꢀtoꢀ+125°C 50V 100V 100V E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 0.5
Max. current 1.0
E24 ±5% 1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
50V 100V E24/E96ꢀ±1% 1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω ±250ꢀppm/°C Rated current 1.0
10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ ±200ꢀppm/°C Max. current 2.0
YC124 1/16W -55°Cꢀtoꢀ+155°C 25V
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 1.0
±200ꢀppm/°C
YC162 1/16W -55°Cꢀtoꢀ+125°C 50V 100V 100V
Max. current 2.0
E24 ±5% 1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
YC164 1/16W -55°Cꢀtoꢀ+155°C 50V 100V 100V E24/E96ꢀ±1% 1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 1.0
Max. current 2.0
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
YC248 1/16W -55°Cꢀtoꢀ+155°C 50V 100V 100V E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 2.0
Max. current 10.0
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
YC324 1/8W -55°Cꢀtoꢀ+155°C 200V 500V 500V
E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
-- --
TC122
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
1/16W -55°Cꢀtoꢀ+125°C 50V 100V 100V E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 1.0
Max. current 1.5
TC122H
TC122M
TC124
±200ꢀppm/°C
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
1/16W -55°Cꢀtoꢀ+125°C 50V 100V 100V E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 1.0
Max. current 1.5
TC124H
TC124M
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
TC164 1/16W -55°Cꢀtoꢀ+155°C 50V 100V 100V E24/E96ꢀ±1% 10Ωꢀ≤ꢀRꢀ≤ꢀ1MΩ
Jumper <ꢀ0.05Ω
Rated current 1.0
Max. current 2.0
YC158 1/16W -55°Cꢀtoꢀ+155°C 25V
50V 50V
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ100KΩ
E24 ±5% 10Ωꢀ≤ꢀRꢀ≤ꢀ330KΩ
-- --
-- --
YC358 1/16W -55°Cꢀtoꢀ+155°C 50V 100V 100V
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
Life
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
High temperature exposure
Moisture resistance
Each temperature / humidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhours
(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwith
ꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 106F
±(2%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
±(0.5%ꢀ+0.05Ω)ꢀforꢀ10Kꢀtoꢀ10M
±(1%ꢀ+0.05Ω)ꢀforꢀothers
<ꢀ50mΩꢀforꢀjumper
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Thermal shock
Wetting
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)
Solderability
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
No visible damage
Resistance to
MIL-STD-202G-
soldering heat method 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(2%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
No visible damage
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
Short time overload
32
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
Size code (inch) (code 3-4)
10 = 0201 x 2 (0202)
0201 x 4 (0204)
Chip Resistors Selection Charts
YC/TC - Arrays, convex / concave / flat
Global part number - Arrays
Ordering example: YC122-JR-07100KL
Y C 1 2
2
―
J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
Default code (code 17)
YC = Array & Network
(convexꢀ/ꢀflat)ꢀthickꢀfilm
TCꢀ=ꢀArrayꢀ(concave)ꢀthickꢀfilm
Resistance (code 12-16)
0R = Jumper
10Rꢀ =ꢀ10Ω
12 = 0402 x 2 (0404)
0402 x 4 (0408)
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
16 = 0603 x 2 (0606)
0603 x 4 (0612)
24 = 0602 x 8 (0616)
32 = 1206 x 4 (1224)
T. C. R. (code 9)
Number of resistors (code 5)
2 = 2 resistors
“―”ꢀ=ꢀBasedꢀonꢀspec.
4 = 4 resistors
Packing style (code 8 )
R = Paper tape reel
8 = 8 resistors
K = Embossed plastic tape reel
Schematic (code 6)
H = Reverse & Half type
M = Reverse type
Tolerance (code 7)
F = ±1%
"-"ꢀ=ꢀBasedꢀonꢀspec.
J = ±5% (for Jumper ordering)
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Arrayꢀthickꢀfilmꢀchipꢀresistors
2 X 0402 /
1 X 1
4 X 0402 /
2 X 1
8 X 0602 /
4.0 X 1.6
4 X 0603 /
3.2 X 1.3
4 X1206 /
5.2 X 3.1
Size:ꢀinchꢀ/ꢀmm
Power
1/16ꢀW
1/16ꢀW
1/16ꢀW
1/16ꢀW
1/8ꢀW
Tolerance
+5%
+1%
+5%
+1%
+5%
+1%
+5%
+1%
+5%
+1%
+5%
R-arrayꢀ/ꢀ
R-network
R-network
(concave)
R-arrayꢀ/ꢀ
R-arrayꢀ/ꢀ
R-arrayꢀ/ꢀ
R-arrayꢀ/ꢀ
R-arrayꢀ/ꢀ
R-arrayꢀ/ꢀ
R-arrayꢀ/ꢀ
R-arrayꢀ/ꢀ
R-arrayꢀ/
R-network R-network
(concave) (convex)
R-arrayꢀ/ꢀ
Type
R-network R-network R-network R-network R-network R-network R-network R-network
(convex)
(convex)
(convex)
(convex)
(convex)
(convex)
(convex)
(convex)
Resistance
Packing
E24
E24ꢀ/ꢀE96
E24
E24ꢀ/ꢀE96
E24
E24ꢀ/ꢀE96
E24
E24ꢀ/ꢀE96
E24
E24/E96
E24
paper tape
paper tape
paper tape
paper tape
blister tape
Quantity
---
---
---
---
---
---
---
---
---
---
---
---
---
---
2350 039 10...L
4 000
5 000
2350 053 10...L 2350 043 1....L 2350 035 10...L 2350 025 1....L 2350 034 10...L
2350 024 1...L
---
---
---
---
2350 013 11...L 2350 013 2....L 2350 033 11...L 2350 023 2....L
---
2350 053 91001L
---
---
---
---
---
2350 035 91001L
---
---
---
---
---
2350 034 91001L
---
---
---
---
10 000
5 000
Jumper
---
---
---
---
---
---
2350 013 91001L
2350 033 91001L
10 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
33
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
YCꢀ=ꢀArrayꢀ&ꢀNetworkꢀ(convex)ꢀthickꢀfilm
Chip Resistors Selection Charts
YC/TC - Networks, T-type / L-type
Global part number - Networks
Ordering example: YC158TJR-07100KL
Y C 1 5
8
T
J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
Default code (code 17)
Resistance (code 12-16)
0R = Jumper
10Rꢀ =ꢀ10Ω
Size code (inch) (code 3-4)
15ꢀ=ꢀ10Pin/8Rꢀ(0612)
35ꢀ=ꢀ10Pin/8Rꢀ(1225)
Number of resistors (code 5)
8 = 8 resistors
Taping reel (code 10-11)
07 = 7 inch Dia. reel
13 = 13 inch Dia. reel
Schematic (code 6)
L = L-type (for YC358)
Tꢀ=ꢀT-typeꢀ(forꢀYC158/358)
T. C. R. (code 9)
“―”ꢀ=ꢀBasedꢀonꢀspec.
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Tolerance (code 7)
F = ±1%
J = ±5%
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
ꢀNetworkꢀthickꢀfilmꢀchipꢀresistors
Size: inch (mm)
Power
0612 (1632)
1/16ꢀW
1225 (3264)
1/16ꢀW
Tolerance
+5%
+5%
T-typeꢀ10ꢀPinꢀ/ꢀ8R
PIN 5 and PIN 10 no resistance
T-typeꢀ10ꢀPinꢀ/ꢀ8R
PIN 5 and PIN 10 no resistance
L-typeꢀ10ꢀPinꢀ/ꢀ8R
PIN 1 and PIN 6 no resistance
Type
Resistance
Packing
E24
paper tape
---
E24
E24
blister tape
Quantity
4 000
5 000
2350 201 10...L
---
2350 200 10...L
---
2350 230 10...L
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
34
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Features
•ꢀ Current sensing of desktop & notebook PC
•ꢀ Resistanceꢀvaluesꢀdownꢀtoꢀ0.01Ω
•ꢀ Highly reliable multilayer electrode construction
•ꢀ Low inductance
•ꢀ High speed logic circuits
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
resistive layer
70
100
80
60
40
inner electrode
termination (Ni / matte tin)
20
125
inner electrode
-55
-40
-20
0
20
40
60
80
100 120 140 160
ceramic substrate
Ambient Temperature ( C)
Dimensions
Type
L
W
H
I1
I2
I1
I1
RL0402
RL0603
RL0805
RL1206
RL1210
RL1218
RL2010
RL2512
1.00 ±0.10
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
3.05 ±0.15
5.00 ±0.10
6.35 ±0.10
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
4.60 ±0.20
2.50 ±0.15
3.20 ±0.15
0.35 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.50 ±0.20
0.45 ±0.25
0.60 ±0.20
0.60 ±0.20
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45±0.20
0.50 ±0.20
0.50 ±0.25
0.50 ±0.20
0.50 ±0.20
H
I2
I2
W
L
unit: mm
35
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Electrical characteristics
Type
Power
P70
Operating Temp.
range
T. C. R.
(ꢀppm/°C)ꢀ
Resistance range & tolerance
Jumper criteria
Max. resistance 20mΩ
Rated current 1.5A
RL0402
RL0603
1/16Wꢀ
1/10Wꢀ
1/8Wꢀ
50mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
Max. resistance 20mΩ
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
Rated current
2A
Max. resistance 20mΩ
Rated current 2.5A
RL0805
RL1206
1/4W
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
--
--
See following table
-55°Cꢀtoꢀ+125°Cꢀ
E24 ±1%, ±2%, ±5%
“T.C.R.-ꢀRLꢀseries”ꢀ Max. resistance 20mΩ
1/4Wꢀ
Rated current 3.5A
ꢀ1/2Wꢀ
1/2Wꢀ
1W
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
10mΩꢀ≤ꢀRꢀ<ꢀ1Ωꢀ
--
--
--
--
--
--
--
--
--
--
RL1210
RL1218
RL2010
RL2512
3/4Wꢀ
1W
Note:ꢀTheꢀpartialꢀvaluesꢀofꢀ25ꢀ/ꢀ40ꢀ/ꢀ50ꢀ/ꢀ60ꢀ/ꢀ250ꢀ/ꢀ400ꢀ/ꢀ500ꢀmΩꢀareꢀalsoꢀavailable
T. C. R. - RL series
T. C. R.
Operating
Temp. range
Resistancec
range
Type
50mΩ≤R<100mΩ
±1000ꢀppm/°C
100mΩ≤R<500mΩ
ꢀ±800ꢀppm/°C
500mΩ≤R<1Ω
ꢀ±300ꢀppm/°C
RL0402 -55°Cꢀtoꢀ+125°C 50mΩ≤R<1Ω
RL0603 -55°Cꢀtoꢀ+125°C 10mΩ≤R<1Ω
10mΩ≤R≤36mΩ
±1ꢀ500ꢀꢀppm/°C
36mΩ≤R≤91mΩ
±1ꢀ200ꢀꢀppm/°C
91mΩ<R≤500mΩ
±800ꢀppm/°C
500mΩ<R<1Ω
±300ꢀppm/°C
10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω
RL0805
±1ꢀ500ꢀppm/°C ±1ꢀ200ꢀppm/°C ±1ꢀ000ꢀppm/°C
±600ꢀppm/°C
±300ꢀppm/°C
±200ꢀppm/°C
RL1206 -55°Cꢀtoꢀ+125°C 10mΩ≤R<1Ω
RL1210
±1ꢀ500ꢀppm/°C ±1ꢀ000ꢀppm/°C ±800ꢀppm/°C
±600ꢀppm/°C
±300ꢀppm/°C
±200ꢀppm/°C
10mΩ≤R≤30mΩ
±2ꢀ000ꢀꢀppm/°C
30mΩ<R≤56mΩ
±1ꢀ000ꢀꢀppm/°C
56mΩ<R≤180mΩ
±700ꢀꢀppm/°C
180mΩ<R<1Ω
±250ꢀꢀppm/°C
RL1218 -55°Cꢀtoꢀ+125°C 10mΩ≤R<1Ω
10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω
RL2010
±1ꢀ500ꢀppm/°C ±1ꢀ200ꢀppm/°C ±1ꢀ000ꢀppm/°C
±1ꢀ500ꢀppm/°C ±1ꢀ200ꢀppm/°C ±800ꢀppm/°C
±600ꢀppm/°C
±600ꢀppm/°C
±300ꢀppm/°C
±300ꢀppm/°C
±200ꢀppm/°C
±200ꢀppm/°C
-55°Cꢀtoꢀ+125°C 10mΩ≤R<1Ω
RL2512
Environmental characteristics
Performance test
Life
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70°C ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±2%
±1%
High temperature
exposure
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
MIL-STD-202G-
method 106F
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhoursꢀ(methodꢀ
106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
Moisture resistance
Thermal shock
±2%
±1%
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%ꢀcovered)
No visible damage
J-STD-002B
testB
Wetting
Solderability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±1%
Lead-free solder, 260°C, 10 seconds immersion time
No visible damage
RL standard power:
MIL-R-55342D-
para 4.7.5
6.25 times of rated power for 5 seconds at room temperature
RL high power:
±2%
Short time overload
No visible damage
5 times of rated power for 5 seconds at room temperature
36
0R1ꢀ =ꢀ0.1Ω
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
0R2ꢀ =ꢀ0.2Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: RL0603JR-070R01L
R L 0 6 0 3
J
R
―
0 7 0 R 0 1
L
Series name (code 1-2)
Default code(1/2) (code 17)
RL = Thick Film Low ohmic
Resistance (code 12-16)
0R01ꢀ=ꢀ0.01Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Tolerance (code 7)
F = ±1%
G = ±2%
Packing style (code 8 )
R = Paper tape reel
J = ±5%
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
37
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Phycomp worldwide - Traditional type
Low ohmic chip resistors
0603 (1608)
Size: inch (mm)
Power
0402 (1005)
0805 (2012)
1206 (3216)
1/16ꢀW
1/10ꢀW
1/8ꢀW
1/4ꢀW
Tolerance
Resistance
Packing
+5%
+1%
+5%
E24
+1%
+5%
E24
+1%
+5%
E24
+1%
E24
E24
E24
E24
E24
paper tape
paper tape
paper tape
paper tape
Quantity
---
---
2350 512 10…L 2350 512 12…L 2350 511 10…L 2350 511 12…L 2350 510 10…L 2350 510 12…L
5 000
2350 513 20…L 2350 513 22…L
---
---
---
---
---
---
10 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp worldwide - Traditional type
Low ohmic chip resistors
Size: inch (mm)
Power
1210 (3225)
1218 (3248)
2010 (5025)
2512 (6432)
1/2ꢀW
1 W
3/4ꢀW
1 W
Tolerance
Resistance
Packing
+5%
+1%
+5%
+1%
+5%
+1%
+5%
+1%
E24
E24
E24
E24
E24
E24
E24
E24
paper tape
blister tape
blister tape
blister tape
Quantity
---
---
2322 735 64…L
2322 735 7….L
2322ꢀ760ꢀ90..0L/60..7L 2322ꢀ761ꢀ90..0L/6...7L 2322ꢀ762ꢀ90..0L/60..7L 2322ꢀ763ꢀ90..0L/6...7L
4 000
5 000
2390ꢀ735ꢀ90..0L/60..7L
2390 735 3….L
---
---
--- --- --- ---
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
38
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0R1ꢀ =ꢀ0.1Ω
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
0R2ꢀ =ꢀꢀ0.2Ω
RLꢀ=ꢀThickꢀfilmꢀlowꢀohmic
Chip Resistors Selection Charts
RL - Thick film low ohmic, high power chip resistors, 0402 / 1206
Global part number - Preferred type
Ordering example: RL0805JR-7W0R01L
R L 0 8 0 5
J
R
―
7 W 0 R 0 1
L
Series name (code 1-2)
Default code (code 17)
Resistance (code 12-16)
0R01ꢀ=ꢀ0.01Ω
Taping reel (code 10-11)
Tolerance (code 7)
F = ±1%
7W= 7 inch Dia. reel and
2 x standard power type
G = ±2%
J = ±5%
Packing style (code 8 )
R = Paper tape reel
T. C. R. (code 9)
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Low ohmic high power chip resistors
Size: inch (mm)
Power
0805 (2012)
1206 (3216)
1/2ꢀW
1/4ꢀW
Tolerance
Resistance
Packing
+5%
+1%
+5%
+1%
E24
E24ꢀ/ꢀE96
E24
E24ꢀ/ꢀE96
paper tape
2350 519 1.…L
paper tape
Quantity
2350 511 15…L
2350 511 17…L
2350 519 01…L
5 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
39
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Features
•ꢀ Excellent T. C. R.
•ꢀ Precision current sensing control
•ꢀ Excellent performance for current sensing applications
•ꢀ Low ohmic and high power
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
100
resistive layer
80
60
40
20
inner electrode
termination (Ni / matte tin)
155
100 120 140 160
inner electrode
-55
-40
-20
0
20
40
60
80
ceramic substrate
Ambient Temperature ( C)
Dimensions
Type
L
W
H
l1
l2
PT0402
PT0603
PT0805
PT1206
1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
2.00 ±0.10 1.25 ±0.10 0.55 ±0.10 0.35 ±0.20 0.35 ±0.20
I1
I1
(ꢀ50mΩꢀ≤ꢀRꢀ<ꢀ75mΩ 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.45 ±0.20
ꢀꢀ&ꢀ91mΩꢀ≤ꢀRꢀ<ꢀ1Ω)
H
PT1206
(75mΩ≤R<91mΩ)
3.10±0.10
1.60±0.10
0.55±0.10
0.75±0.20
0.45±0.20
I2
I2
W
PT2010
5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
L
unit: mm
PT2512
Note: For relevant physical dimensions, please refer to above construction outlines
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀPleaseꢀcontactꢀourꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
40
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Electrical characteristics
Power
P70
Operating Temp.
Max.
working voltage
Type
Tolerance
Resistance range & T. C. R.
Jumper criteria
range
50mΩꢀ≤ꢀRꢀ<ꢀ68mΩ ±600ꢀppm/°C
68mΩꢀ≤ꢀRꢀ<ꢀ100mΩ ±300ꢀppm/°C
100mΩꢀ≤ꢀRꢀ<ꢀ1Ω ±200ꢀppm/°C
1/16W
Max. resistance 5mΩ
Rated current 3A
PT0402
1/8W
1/6W
68mΩ ±300ꢀppm/°C
50mΩ 0/+400ꢀppm/°C
50mΩ < R < 68mΩ 0/+350ꢀppm/°C
68mΩꢀ≤ꢀRꢀ<ꢀ100mΩ 0/+300ꢀppm/°C
100mΩꢀ≤ꢀRꢀ<ꢀ1Ω ±200ꢀppm/°C
1/10W
1/5W
Max. resistance 8mΩ
Rated current 5A
PT0603
50mΩ 0/+400ꢀppm/°C
50mΩ < R < 68mΩ 0/+350ꢀppm/°Cꢀ
68mΩ 0/+300ꢀppm/°C
1/3W
1/8W
E24 ±2%, ±5%
E24/E96ꢀꢀ±1%
-55°Cꢀtoꢀ+155°Cꢀ
(PxR)^1/2ꢀ
50mΩ 0/+350ꢀppm/°C
50mΩ < R < 68mΩ 0/+300ꢀppm/°C Max. resistance 5mΩ
PT0805
PT1206
68mΩꢀ≤ꢀRꢀ<ꢀ100mΩ 0/+250ꢀppm/°C
100mΩꢀ≤ꢀRꢀ<ꢀ1Ω ±100ꢀppm/°C
Rated current 6A
1/4W
1/4W
1/2W
±350ppm
±100ppm
±75ppm
50mΩꢀ≤ꢀRꢀ<ꢀ75mΩ
75mΩꢀ≤ꢀRꢀ≤ꢀ100mΩꢀ
100mΩꢀ<ꢀRꢀ<ꢀ1Ω
Max. resistance 5mΩ
Rated current 10A
3/4W
1W
Max. resistance ---
Rated current ---
PT2010
PT2512
100mΩ ±100ꢀppm/°C
100mΩꢀ<ꢀRꢀ<ꢀ1Ω ±75ꢀppm/°C
1W
Max. resistance ---
Rated current ---
2W
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1%ꢀ+0.0005Ω)
<ꢀ20mΩꢀforꢀjumper
Life
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature depending on
specification,ꢀunpowered
±(1%ꢀ+0.0005Ω)
<ꢀ20mΩꢀforꢀjumper
High temperature exposure
Moisture resistance
Thermal shock
MIL-STD-202G-
method 106F
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhoursꢀ(methodꢀ ±(0.5%ꢀ+0.0005Ω)
106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
<ꢀ20mΩꢀforꢀjumper
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
±(1%ꢀ+0.0005Ω)
<ꢀ10mΩꢀforꢀjumper
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%ꢀcovered)
No visible damage
J-STD-002B
testB
Wetting
Solderability
±(0.5%ꢀ+0.0005Ω)
No visible damage
<ꢀ10mΩꢀforꢀjumper
Resistance to MIL-STD-202G-
soldering heat method 210F
Lead-free solder, 260°C, 10 seconds immersion time
PT standard power:
6.25 times of rated power for 5 seconds at room temperature
PT high power:
5 times of rated power for 5 seconds at room temperature
PTꢀjumper:ꢀ
±(1%ꢀ+0.0005Ω)
No visible damage
<ꢀ10mΩꢀforꢀjumper
MIL-R-55342D-
para 4.7.5
Short time overload
2.5 times of rated current for 5 seconds at room temperature
41
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: PT2512FK-070R01L
P T 2 5 1 2
F
K
―
0 7 0 R 0 1
L
Series name (code 1-2)
Default code(1/2) (code 17)
PTꢀ=ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.
Resistance (code 12-16)
0R = Jumper
0R1ꢀ=ꢀ0.1Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
0R2ꢀ=ꢀ0.2Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
13 = 13 inch Dia. reel
7W= 7 inch Dia. reel and
2 x standard power type
Tolerance (code 7)
F = ± 1%
7T = 7 inch Dia. reel and
3 x standard power type
G = ± 2%
J= ± 5%
T. C. R. (code 9)
“―”ꢀforꢀJumperꢀordering
“―”ꢀ=ꢀBasedꢀonꢀspec.
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
ꢀ
3.ꢀPTꢀseriesꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
42
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Features
•ꢀ Excellent T. C. R.
•ꢀ Precision current sensing control
•ꢀ Excellent performance for current sensing applications
•ꢀ Low ohmic and high power
Derating curve
Construction
marking layer
protective coat
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
resistive layer
inner electrode
H
termination (Ni / matte tin)
ceramic substrate
I2
I1
70
100
80
60
40
W
20
155
-55
-40
-20
0
20
40
60
80
100 120 140 160
Ambient Temperature ( C)
L
Dimensions
Type
L
W
H
I1
0.35 ±0.20
I2
PT0815
2.00 ±0.10
3.70 ±0.10
0.50 ±0.10
0.40 ±0.20
43
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Electrical characteristics
Type
Power
P70
Operating Temp.
range
Max.
working voltage
Tolerance
Resistance range & T. C. R.
1/2W
E24 ±2%, ±5%
E24/E96ꢀ±1%
PT0815
-55°Cꢀtoꢀ+155°Cꢀ
(PxR)^1/2
25mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ ±100ꢀppm/°C
1W
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(1%ꢀ+0.0005Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpowered
High temperature exposure
±(1%ꢀ+0.0005Ω)
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.Hꢀ
MIL-STD-202G-
method 106F
Moisture resistance
±(0.5%ꢀ+0.0005Ω)
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50Xꢀ
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)ꢀ
No visible damage
Wetting
Solderability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(0.5%ꢀ+0.0005Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
PT standard power:
6.25 times of rated power for 5 seconds at room
temperature
PT high power:
MIL-R-55342D-
para 4.7.5
±(1%ꢀ+0.0005Ω)
No visible damage
Short time overload
5 times of rated power for 5 seconds at room temperature
44
0R05ꢀꢀꢀ=ꢀ0.05Ω
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Global part number - Preferred type
Ordering example: PT0815FK-070R01L
P T 0 8 1 5
F
K
―
0 7 0 R 0 1
L
Series name (code 1-2)
Default code(1/2) (code 17)
PTꢀ=ꢀThickꢀfilmꢀlowꢀohmicꢀlowꢀT.ꢀC.ꢀR.
Resistance (code 12-16)
0R025ꢀ=ꢀ0.025Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0815 = 2.00 x 3.70
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Tolerance (code 7)
F = ±1%
7W= 7 inch Dia. reel and
2 x standard power type
G = ±2%
J = ±5%
T. C. R. (code 9)
Packing style (code 8 )
“―”ꢀ=ꢀbaseꢀonꢀspec
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
ꢀ
3.ꢀPTꢀseriesꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
45
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
Features
•ꢀ ExcellentꢀT.ꢀC.ꢀR.ꢀcomparedꢀtoꢀthickꢀfilmꢀlowꢀohmic
•ꢀ Precision current sensing control
•ꢀ Excellent performance for current sensing applications
•ꢀ Ultraꢀlowꢀohmicꢀdownꢀtoꢀ0.0005Ω
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
PR/PA series
70
100
80
60
PR series
PE/PF 0603 ~ 4527
40
PA, PH series
PE/PF 0402
20
155 170
-55
-40
-20
0
20
40
60
80
100 120 140 160
180
Ambient Temperature ( C)
Note: constructionꢀwillꢀbeꢀadjustedꢀtoꢀresistanceꢀ
value (only for PF series).
Dimensions
PR series
unit: mm
Type
Resistance range
1mΩꢀ≤ꢀRꢀ≤ꢀ6mΩ
1mΩꢀ≤ꢀRꢀ≤ꢀ3mΩꢀ
L
W
H
l1
l2
PR1206
3.20 ±0.25
5.10 ±0.25
5.10 ±0.25
1.60 ±0.25
0.64 ±0.25
0.80 ±0.25
0.64 ±0.25
0.75 ±0.15
0.55 ±0.10
0.78 ±0.25
0.64 ±0.25
0.50 ±0.25
1.30 ±0.25
0.80 ±0.25
1.20 ±0.20
0.60 ±0.20
1.88 ±0.25
1.11 ±0.25
0.50 ±0.25
1.30 ±0.25
0.80 ±0.25
1.20 ±0.20
0.60 ±0.20
1.88 ±0.25
1.11 ±0.25
2.54 ±0.25
2.54 ±0.25
PR2010
4mΩꢀ≤ꢀRꢀ≤ꢀ100mΩꢀ
1mΩꢀ≤ꢀRꢀ≤ꢀ2mΩ
3mΩꢀ≤ꢀRꢀ≤ꢀ5mΩ
0.5mΩꢀ≤ꢀRꢀ≤ꢀ4mΩ
5mΩꢀ≤ꢀRꢀ≤ꢀ75mΩ
PR2512 (1)
PR2512 (2)
6.40 ±0.20
6.25 ±0.25
3.20 ±0.20
3.30 ±0.25
PA series
unit: mm
l2
Type
Resistance range
L
W
H
l1
PA2512
1mΩꢀ≤ꢀRꢀ≤ꢀ10mΩꢀ
6.50 ±0.20
3.20 ±0.20
0.65 ±0.15
0.90 ±0.20
0.90 ±0.20
Note: 1.ꢀApplyꢀtoꢀorderingꢀcodesꢀendingꢀinꢀ“L”
ꢀ
ꢀ
2.ꢀApplyꢀtoꢀorderingꢀcodesꢀendingꢀinꢀ“Z”
Pleaseꢀcontactꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
46
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
Dimensions
PF / PH / PE series
Type
unit: mm
Resistance range
10mΩ ≤ R ≤ 50mΩ
5mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
10mΩꢀ<ꢀRꢀ≤ꢀ50mΩ
3mΩ
L
W
H
l1
l2
PFꢀ/ꢀPE0402ꢀ
PFꢀ/ꢀPE0603ꢀ(2)
PFꢀ/ꢀPH0805ꢀ(1)
PFꢀ/ꢀPHꢀ/ꢀPE0805ꢀ
1.00 ± 0.30
1.60 ± 0.20
2.03 ± 0.25
2.10 ± 0.20
0.50 ± 0.20
0.80 ± 0.20
1.27 ± 0.25
1.35 ± 0.20
0.45 ± 0.20
0.60 ± 0.15
0.33 ± 0.12
0.65 ± 0.20
0.25 ± 0.10
---
---
0.30 ± 0.15
0.38 ± 0.25
---
0.38 ± 0.25
0.75 ± 0.15
4mΩ
0.70 ± 0.15
0.63 ± 0.15
0.55 ± 0.15
0.40 ± 0.15
0.65 ± 0.25
1.30 ± 0.20
1.20 ± 0.20
1.15 ± 0.20
0.58 ± 0.20
1.50 ± 0.20
0.60 ± 0.20
1.85 ± 0.25
1.55 ± 0.25
0.75 ± 0.25
1.30 ± 0.25
2.93 ± 0.20
2.70 ± 0.20
2.50 ± 0.20
2.15 ± 0.20
1.95 ± 0.20
1.90 ± 0.20
0.95 ± 0.20
---
5mΩ
PFꢀ/ꢀPHꢀ/ꢀPE0805ꢀ(2)
PFꢀ/ꢀPH1206ꢀ(1)
2.00 ± 0.20
3.20 ± 0.25
3.20 ± 0.20
1.25 ± 0.20
1.60 ± 0.25
1.60 ± 0.20
0.60 ± 0.15
0.60 ± 0.25
0.60 ± 0.15
---
0.50 ± 0.25
---
6mΩꢀ≤ꢀRꢀ≤ꢀ7mΩ
8mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
10mΩꢀ<ꢀRꢀ≤ꢀ50mΩ
3mΩ
4mΩ
PFꢀ/ꢀPHꢀ/ꢀPE1206ꢀ(2)
5mΩꢀ≤ꢀRꢀ≤ꢀ8mΩ
9mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
5mΩꢀ≤ꢀRꢀ≤ꢀ9mΩ
10mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
6mΩ
PFꢀ/ꢀPE2010
5.00 ± 0.20
6.45 ± 0.25
2.50 ± 0.20
3.25 ± 0.25
0.60 ± 0.15
0.70 ±0 .25
---
0.75 ± 0.25
7mΩꢀ≤ꢀRꢀ≤ꢀ15mΩ
20mΩꢀ≤ꢀRꢀ≤ꢀ50mΩꢀ(1W)
20mΩꢀ≤ꢀRꢀ≤ꢀ50mΩꢀ(2W)
1mΩ
PF2512 (1)
1.30 ± 0.25
0.75 ± 0.25
2mΩ
3mΩ
PFꢀ/ꢀPE2512ꢀ(2)
PFꢀ/ꢀPE4527
4mΩ
6.30 ± 0.20
3.10 ± 0.20
0.60 ± 0.15
---
5mΩ
6mΩꢀ≤ꢀRꢀ≤ꢀ8mΩ
9mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
5mΩ
11.50±0.20
7.00±0.20
0.60±0.15
2.90±0.20
---
6mΩꢀ≤ꢀRꢀ<1Ω
11.50 ± 0.20
7.00 ± 0.20
0.60 ± 0.15
2.60 ± 0.20
Note: 1.ꢀApplyꢀtoꢀorderingꢀcodesꢀendingꢀinꢀ“L”
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ2.ꢀApplyꢀtoꢀorderingꢀcodesꢀendingꢀinꢀ“Z”
3. For relevant physical dimensions, please refer to above construction outlines
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀPleaseꢀcontactꢀwithꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀorderingꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
47
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 2512
Electrical characteristics
Type Technology Size
Power Operating Temp.
Max.
working voltage
Min.
T. C. R.
Tolerance
Resistance range
P70
range
1/16W
0402 1/8W -55°C to 155°C
10mΩ ≤ R ≤ 50mΩ
±100ꢀppm/°C
1/4W
1/10W
1/5W
0603 1/3W
2/5W
5mΩ ≤ R<100mΩ
3mΩ ≤ R<100mΩ
1/2W
1/8W
1/4W
0805
1/3W
±1%
±2%
±5%
PE
Metal Foil
1/2W
(PxR)^1/2
±50ꢀppm/°C
±75ꢀppm/°C
±100ꢀppm/°C
1/4W
-55°C to 170°C
1206 1/2W
3mΩ ≤ R<100mΩ
5mΩ ≤ R<100mΩ
6mΩ ≤ R<100mΩ
1W
1/2W
2010
1W
1W
2512
4527
2W
3W
2W
3W
5mΩ ≤ R<1Ω
5W
1/16W
0402 1/8W -55°C to 155°C
10mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
±100ꢀppm/°C
1/4W
1/10W
1/5W
0603 1/3W
2/5W
5mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
3mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
1/2W
1/8W
1/4W
0805
1/3W
±1%
±2%
±5%
PF
Metal Foil
1/2W
(PxR)^1/2
1/4W
-55°C to 170°C
1206 1/2W
±50ꢀppm/°C
±75ꢀppm/°C
±100ꢀppm/°C
3mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
5mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
6mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
1W
1/2W
2010
1W
1W
2512
4527
2W
3W
2W
3W
5W
5mΩꢀ≤ꢀRꢀ<ꢀ1Ω
0805 4/5W
1206 1W
PH
Metal Foil
-55°C to 155°C
(PxR)^1/2
±1%, ±2%, ±5% 4mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
Note: Pleaseꢀcontactꢀwithꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
48
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
Electrical characteristics
Type Technology Size
Power Operating Temp.
Max.
working voltage
Min.
T. C. R.
Tolerance
Resistance range
P70
range
1/4W
1206 1/2W
±1%, ±2%, ±5% 1mΩꢀ≤ꢀRꢀ≤ꢀ6mΩ
1W
±50ꢀppm/°C
1/2W
2010
±1%, ±2%, ±5% 1mΩꢀ≤ꢀRꢀ<ꢀ100mΩ
1W
±0.5%
7mΩꢀ≤ꢀRꢀ≤ꢀ75mΩ
0.5mΩꢀ≤ꢀRꢀ≤ꢀ2mΩ
±200ꢀppm/°C
1W
PR
Metal Plate
-55°C to 170°C
(PxR)^1/2
±1%, ±2%, ±5%
±0.5%
3mΩꢀ≤ꢀRꢀ≤ꢀ5mΩ
7mΩꢀ≤ꢀRꢀ≤ꢀ75mΩ
0.5mΩꢀ≤ꢀRꢀ≤ꢀ2mΩ
±100ꢀppm/°C
±50ꢀppm/°C
±200ꢀppm/°C
2512
2W
±1%, ±2%, ±5%
3mΩꢀ≤ꢀRꢀ≤ꢀ5mΩ
±100ꢀppm/°C
±50ꢀppm/°C
3W
1W
±1%, ±2%, ±5% 0.5mΩꢀ≤ꢀRꢀ≤ꢀ10mΩ
PA
Metal Plate
2512
2W
3W
-55°C to 155°C
(PxR)^1/2
±1%, ±5% 1mΩꢀ≤ꢀRꢀꢀ≤ꢀ10mΩꢀ
±100ꢀppm/°C
Note: Pleaseꢀcontactꢀwithꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(1%ꢀ+0.0005Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature depending on
specification,ꢀunpowered
High temperature exposure
Moisture resistance
Thermal shock
±(1%ꢀ+0.0005Ω)
±(0.5%ꢀ+0.0005Ω)
±(0.5%ꢀ+0.0005Ω)
MIL-STD-202G-
method 106F
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhoursꢀ(methodꢀ
106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Well tinned
(≥95%ꢀcovered)
Wetting
Solder-
ability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(0.5%ꢀ+0.0005Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
5 times of rated power for 5 seconds at room temperature
MIL-R-55342D-
para 4.7.5
±(0.5%ꢀ+0.0005Ω)
No visible damage
Short time overload
49
0R1ꢀ =ꢀ0.1Ω
0R2ꢀ =ꢀ0.2Ω
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
4527 = 11.0 x 7.0
0R01ꢀ=ꢀ0.01Ω
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: PF2512FKF070R01L
Series name (code 1-2)
P F
2 5 1 2
F
K
F
0 7 0 R 0 1
L
Default code(1/2) (code 17)
PR/PA/PF/PH/PEꢀ=ꢀCurrentꢀsensorsꢀ-ꢀlowꢀT.ꢀC.ꢀR.
Lꢀ/ꢀZꢀ=ꢀDefaultꢀcode
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
Resistance (code 12-16)
0U5=0.0005Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
7W = 7 inch Dia. reel
2 x standard power type
7T = 7 inch Dia. reel
3 x standard power type
47 = 7 inch Dia. reel
4 x standard power type
57 = 7 inch Dia. reel
5 x standard power type
Tolerance (code 7)
F = ±1%
G = ±2%
J = ±5%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
T. C. R. (code 9)
Eꢀ=ꢀ±50ꢀppm/°C
Mꢀ=ꢀ±75ꢀppm/°C
ꢀFꢀ=ꢀ±100ꢀppm/°C
Gꢀ=ꢀ±200ꢀppm/°C
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2.ꢀPHꢀseriesꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
ꢀ
Phycomp worldwide - Traditional type
Size: inch (mm)
CurrentꢀSensorꢀ-ꢀLowꢀT.ꢀC.ꢀR.ꢀ/ꢀPRꢀseries
2010 (5025)
2512 (6432)
2 W
Power
Tolerance
Packing
1/2ꢀW
1 W
1 W
+5%
+1%
+5%
+1%
+5%
+1%
+5%
+1%
blister tape
blister tape
Quantity
2322 760 63..0L 2322 761 11.. 0L 2322 760 65.. 0L 2322 761 13.. 0L 2322 762 94..0L 2322 763 95..0L 2322 762 10..0L 2322 763 10..0L
4 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp worldwide - Traditional type
CurrentꢀSensorꢀ-ꢀLowꢀT.ꢀC.ꢀR.ꢀ/ꢀPFꢀseries
Size: inch (mm)
Power
2512 (6432)
1 W
2 W
Tolerance
Packing
+5%
+1%
+5%
+1%
blister tape
Quantity
2322 764 96..L
2322 764 97..L
2322 764 10..L
2322 764 30..L
4 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
50
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
Features
•ꢀ ExcellentꢀT.ꢀC.ꢀR.ꢀcomparedꢀtoꢀthickꢀfilmꢀlowꢀohmic
•ꢀ Precision current sensing control
•ꢀ Excellent performance for current sensing applications
•ꢀ Low ohmic and high power
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
70
100
80
60
40
20
170
-55
-40
-20
0
20
40
60
80
100 120 140 160
180
Ambient Temperature ( C)
Dimensions
Type
Resistance range
1mΩꢀ
L
W
H
l1
l2
1.60 ±0.20
1.60 ±0.20
1.60 ±0.20
2.50±0.20
2.50±0.20
2.50±0.20
2.15 ±0.20
2.00 ±0.20
0.32 ±0.20
0.32 ±0.20
0.32 ±0.20
3.70±0.20
3.70±0.20
3.70±0.20
3.75 ±0.25
7.50 ±0.30
0.60 ±0.15
0.60 ±0.15
0.60 ±0.15
0.60±0.15
0.60±0.15
0.60±0.15
0.65 ±0.25
0.60 ±0.15
---
0.55±0.20
0.40±0.20
0.30±0.15
0.95±0.20
0.75±0.20
0.60±0.20
0.70 ±0.25
0.60 ±0.15
PEꢀ/ꢀPF0612ꢀ(2)
PEꢀ/ꢀPF0815ꢀ(2)
2mΩꢀ≤ꢀRꢀ≤ꢀ4mΩ
5mΩꢀ≤ꢀRꢀ≤ꢀ300mΩ
1mΩ
---
---
---
2mΩ
---
---
3mΩ ≤ R ≤ 100mΩ
10ꢀ/ꢀ15ꢀ/ꢀ20mΩ
6ꢀ/ꢀ8ꢀ/ꢀ10mΩ
PEꢀ/ꢀPF0815 (1)
PEꢀ/ꢀPF0830 (2)
0.65 ±0.25
---
1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
(exceptꢀ6/8/10mΩ)
2.50 ±0.20
7.50 ±0.30
0.60 ±0.15
---
0.58 ±0.15
Note: 1.ꢀApplyꢀtoꢀorderingꢀcodesꢀendingꢀinꢀ“L”
ꢀ
ꢀ
2.ꢀApplyꢀtoꢀorderingꢀcodesꢀendingꢀinꢀ“Z”
Pleaseꢀcontactꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
51
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
Electrical characteristics
Power
P70
Operating Temp.
range
Max.
working voltage
Type
Technology
Size
0612
0815
0830
0612
0815
0830
Tolerance
Resistance range & T. C. R.
1W
2W
1mΩꢀ≤ꢀRꢀ≤ꢀ300mΩ
±75ꢀppm/°C
1/2W
1W
Metal Foil
wide termination
PF
-55°C to 170°C
-55°C to 170°C
(PxR)^1/2
(PxR)^1/2
±1%, ±2%, ±5%
1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
±100ꢀppm/°C
1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
2W
3W
1W
2W
1mΩꢀ≤ꢀRꢀ≤ꢀ300mΩ
±75ꢀppm/°C
1/2W
1W
Metal Foil
wide termination
PE
±1%, ±2%, ±5%
1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
±100ꢀppm/°C
1mΩꢀ≤ꢀRꢀ≤ꢀ100mΩ
2W
3W
Note:ꢀPleaseꢀcontactꢀwithꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(1%ꢀ+0.0005Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpowered
High temperature exposure
Moisture resistance
±(1%ꢀ+0.0005Ω)
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.Hꢀ
MIL-STD-202G-
method 106F
±(0.5%ꢀ+0.0005Ω)
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50Xꢀ
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%ꢀcovered)ꢀ
Wetting
J-STD-002B testB
Solderability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(0.5%ꢀ+0.0005Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
MIL-R-55342D-
para 4.7.5
±(0.5%ꢀ+0.0005Ω)
No visible damage
Short time overload
5 times of rated power for 5 seconds at room temperature
52
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
Global part number - Preferred type
Ordering example: PF0815FKF070R01L
P F 0 8 1 5
F
K
F
0 7 0 R 0 1
L
Series name (code 1-2)
Default code(1/2) (code 17)
Lꢀ/ꢀZꢀ=ꢀDefaultꢀcode
PEꢀ/PFꢀ=ꢀcurrentꢀsensorsꢀ-ꢀlowꢀT.ꢀC.ꢀR.,ꢀ
wide termination
Resistance (code 12-16)
0R01ꢀ=ꢀ0.01Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0R02ꢀ=ꢀ0.02Ω
0612 = 1.6 x 3.2
0815 = 2.15 x 3.75
0830 = 2.0 x 7.5
Taping reel (code 10-11)
07 = 7 inch Dia. reel
7W = 7 inch Dia. reel
Tolerance (code 7)
F = ±1%
2 x standard power type
G = ±2%
T. C. R. (code 9)
Mꢀ=ꢀ±75ꢀppm/°C
ꢀFꢀ=ꢀ±100ꢀppm/°C
J = ±5%
Packing style (code 8 )
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2.ꢀPFꢀseriesꢀwideꢀterminationꢀtypeꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
ꢀ
53
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
Features
•ꢀ ExcellentꢀT.ꢀC.ꢀR.ꢀcomparedꢀtoꢀthickꢀfilmꢀlowꢀohmic
•ꢀ Precision current sensing control
•ꢀ Excellent performance for current sensing applications
•ꢀ Ultra-low resistance and narrow tolerance are suitable for
current detection
Derating curve
Construction
Marking Coating
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
Terminal electrode
H
Protective coat
Resistor Layer
Ceramic substrate
70
100
80
PS0306ꢀ/ꢀPS0508ꢀ/ꢀPS0612
60
0508, 0612, 1225
L
40
a
0306
20
C
D
155 170
-55
-40
-20
0
20
40
60
80
100 120 140 160
180
Ambient Temperature ( C)
W
PS1225
B
2
B
1
W
A
A
L
R010
4
3
Top
Bottom
Dimensions
Type
L
W
a
D
c
H
PS0306
PS0508
PS0612
0.80±0.20
1.25±0.20
1.50±0.25
1.60±0.20
0.25±0.20
0.25±0.20
0.35±0.20
0.30±0.15
0.20±0.15
0.38±0.20
0.30±0.15
0.30±0.20
0.66±0.20
0.55±0.20
0.55±0.20
0.75±0.25
2.00±0.20
3.15±0.25
Type
L
W
A
B
H
PS1225
3.10±0.20
6.30±0.20
0.80±0.20
2.20±0.20
0.60±0.15
Note: Applyꢀtoꢀorderingꢀcodesꢀendingꢀinꢀ“Z”
Pleaseꢀcontactꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
ꢀ
54
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
Electrical characteristics
Power
P70
Operating Temp.
range
Max.
working voltage
Type
Technology
Size
Tolerance
Resistance range & T. C. R.
1/8W
1/4W
1/8W
1/4W
1/2W
0306
-55°C to 155°C
-55°C to 170°C
±75ꢀppm/°C
10mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
±100ꢀppm/°C
0508
0612
1225
Metal Foil
4 termination
PS
(PxR)^1/2
±1%, ±5%
0.5mΩ,ꢀ0.75mΩ ±700ꢀppm/°C
1mΩꢀ≤ꢀRꢀ≤ꢀ2mΩ ±400ꢀppm/°C
3mΩꢀ≤ꢀRꢀ≤ꢀ5mΩ ±150ꢀppm/°C
1W
3W
-55°C to 170°C
-55°C to 170°C
±75ꢀppm/°C
4mΩꢀ≤ꢀRꢀ≤ꢀ50mΩ
±100ꢀppm/°C
Note:ꢀPleaseꢀcontactꢀwithꢀsalesꢀoffices,ꢀdistributorsꢀandꢀrepresentativesꢀinꢀyourꢀregionꢀbeforeꢀordering
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(1%ꢀ+0.0005Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpowered
High temperature exposure
Moisture resistance
±(1%ꢀ+0.0005Ω)
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.Hꢀ
MIL-STD-202G-
method 106F
±(0.5%ꢀ+0.0005Ω)
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50Xꢀ
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%ꢀcovered)ꢀ
Wetting
J-STD-002B testB
Solderability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(0.5%ꢀ+0.0005Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
MIL-R-55342D-
para 4.7.5
±(0.5%ꢀ+0.0005Ω)
No visible damage
Short time overload
5 times of rated power for 5 seconds at room temperature
55
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
Global part number - Preferred type
Ordering example: PS0612FKF070R01L
P S 0 6 1 2
F
K
F
0 7 0 R 0 1
L
Series name (code 1-2)
Default code(1/2) (code 17)
Zꢀ=ꢀDefaultꢀcode
PS = current sensors - low T.C.R., 4 termination
Resistance (code 12-16)
0U5ꢀ=ꢀ0.0005Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0R01ꢀ=ꢀ0.01Ω
0R02ꢀ=ꢀ0.02Ω
0306 = 0.8 x 1.6
0508 = 1.25 x 2.0
0612 = 1.6 x 3.2
1225 = 3.2 x 6.35
Taping reel (code 10-11)
07 = 7 inch Dia. reel
7W = 7 inch Dia. reel
2 x standard power type
7T = 7 inch Dia. reel
Tolerance (code 7)
F = ±1%
3 x standard power type
J = ±5%
T. C. R. (code 9)
Mꢀ=ꢀ±75ꢀppm/°C
ꢀFꢀ=ꢀ±100ꢀppm/°C
ꢀLꢀ=ꢀ±150ꢀppm/°C
ꢀPꢀ=ꢀ±400ꢀppm/°C
ꢀQꢀ=ꢀ±700ꢀppm/°C
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. PS series 4 termination typeꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
56
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
Features
•ꢀ New NiAu terminations provide special application for
hybrid board gluing
•ꢀ Competitive with AgPd terminations
•ꢀ Special use in high temperature environment
•ꢀ Higher component and equipment reliability
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
resistive layer
70
100
80
60
40
(jumper chip is a conductor)
inner electrode
20
termination (Ni / Au / Pd)
ceramic substrate
155
-55
-40
-20
0
20
40
60
80
100 120 140 160
Ambient Temperature ( C)
Dimensions
I1
I1
Type
L
W
H
I1
I2
AR0402
AR0603
AR0805
AR1206
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
0.35 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
H
I2
I2
W
L
unit: mm
57
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
Electrical characteristics
Power Operating Temp.
T. C. R.
(ꢀppm/°C)
Jumper criteria
(unit: A)
Type
MWV RCOV DWV
Resistance range & tolerance
P70
range
Rated current 1.0
Max. current 2.0
AR0402 1/16W -55°Cꢀtoꢀ+155°C 50V 100V 100V
AR0603 1/10W -55°Cꢀtoꢀ+155°C 50V 100V 100V
AR0805 1/8W -55°Cꢀtoꢀ+155°C 150V 300V 300V
AR1206 1/4W -55°Cꢀtoꢀ+155°C 200V 500V 500V
Rated current 1.0
Max. current 2.0
E24 ±5% 1Ωꢀ≤ꢀRꢀ≤ꢀ10MΩ
E24/E96ꢀ±1% 1Ωꢀ≤ꢀRꢀ≤ꢀ10MΩ
10Ωꢀ<ꢀRꢀ≤ꢀ10MΩ ±100
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω ±200
Jumper <ꢀ50MΩ
Rated current 2.0
Max. current 5.0
Rated current 2.0
Max. current 10.0
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
Life
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
High temperature exposure
Moisture resistance
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhoursꢀ
(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwithꢀ
25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 106F
±(2%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
±(0.5%ꢀ+0.05Ω)ꢀforꢀ
10K to 10M
±(1%ꢀ+0.05Ω)ꢀforꢀothers
<ꢀ50mΩꢀforꢀjumper
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Thermal shock
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)
No visible damage
Wetting
Solderability
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
No visible damage
Resistance to MIL-STD-202G-
soldering heat method 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(2%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
No visible damage
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
Short time overload
58
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: AR0603JR-07100KL
A R 0 6 0 3
J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
AR = NiAu termination
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10Rꢀ =ꢀ10Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Tolerance (code 7)
F = ±1%
T. C. R. (code 9)
J = ±5% (for Jumper ordering)
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Packing style (code 8 )
R = Paper tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
ChipꢀresistorsꢀwithꢀNi/Auꢀterminations
Size: inch (mm)
Power
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1/16ꢀW
1/10ꢀW
1/8ꢀW
1/4ꢀW
Tolerance
Resistance
Packing
+5%
+1%
+5%
E24
+1%
+5%
E24
+1%
+5%
E24
+1%
E24
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
E24ꢀ/ꢀE96
paper tape
paper tape
paper tape
paper tape
Quantity
---
---
2322 702 11…L 2322 704 1.…L 2322 730 11… 2322 734 1.…L 2322 711 11...L 2322 729 1.…L
5 000
10 000
5 000
2322 705 12…L 2322 706 2….
---
2322 702 19001L
---
---
---
---
---
2322 730 19001L
---
---
---
---
---
2322 711 19001L
---
---
---
---
Jumper
---
---
---
2322 705 19001 L
10 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 13 for details.
59
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
Features
•ꢀ Reducedꢀsizeꢀofꢀfinalꢀequipment
•ꢀ Low assembly costs
•ꢀ Higher component and equipment reliability
•ꢀ Excellent performance at pulse loading
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
100
resistive layer
80
60
40
inner electrode
20
termination (Ni / matte tin)
155
inner electrode
-55
-40
-20
0
20
40
60
80
100 120 140 160
ceramic substrate
Ambient Temperature ( C)
Dimensions
Type
L
W
H
I1
I2
I1
I1
SR0402
SR0603
SR0805
SR1206
SR1218
SR2010
SR2512
1.00±0.05
1.60±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
6.35 ±0.10
0.50±0.05
0.80±0.10
1.25 ±0.10
1.60 ±0.10
4.60 ±0.10
2.50 ±0.15
3.10 ±0.15
0.35±0.05
0.45±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.20±0.10
0.25±0.15
0.35 ±0.20
0.45 ±0.20
0.45 ±0.20
0.55 ±0.15
0.60 ±0.20
0.25±0.10
0.25±0.15
0.35 ±0.20
0.40 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
H
I2
I2
W
L
unit: mm
60
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
Electrical characteristics
Power Operating Temp.
P70 range
Type
MWV
RCOV
DWV
Resistance range & tolerance
T. C. R.
1/16W -55°Cꢀtoꢀ+155°C
1/8W -55°Cꢀtoꢀ+155°C
1/10W -55°Cꢀtoꢀ+155°C
50V
50V
100V
100V
100V
100V
300V
300V
400V
400V
400V
400V
400V
100V
100V
100V
100V
300V
300V
500V
500V
500V
500V
500V
SR0402
SR0603
SR0805
50V
1/5W
1/8W
1/4W
1/4W
1/2W
1W
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
ꢀ-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
50V
150V
150V
200V
200V
200V
200V
200V
E24 ±5%, ±10%, ±20% 1Ωꢀ≤ꢀRꢀ≤ꢀ100KΩ
±200ꢀppm/°C
SR1206
SR1218
SR2010 3/4W
SR2512 1W
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(3%ꢀ+0.05Ω)
±(3%ꢀ+0.05Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
High temperature exposure
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)
No visible damage
Wetting
Solder-
ability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(1%ꢀ+0.05Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
±(2%ꢀ+0.05Ω)
No visible damage
Short time overload
Pulse-Load behavior
4
10
3
10
2
10
1
10
2512
2010
1218
1210
1206
0805
0603
0402
1
-1
10
-2
-1
1
2
3
10
10
1
10
10
10
61
100Kꢀ=ꢀ100KΩ
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: SR0805MR-07100KL
S R 0 8 0 5 M R
―
0 7 1 0 0 K
L
Series name (code 1-2)
SR = Surge
Default code(1/2) (code 17)
Resistance (code 12-16)
10Rꢀ =ꢀ10Ω
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Taping reel (code 10-11)
7W = 7 inch Dia. reel
2 x standard power type
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
Tolerance (code 7)
J = ±5%
T. C. R. (code 9)
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
K=±10%
M = ±20%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Surge chip resistors
Size: inch (mm)
Power
0805 (2012)
1/8ꢀW
1206 (3216)
1/4ꢀW
1218 (3248)
1 W
2512 (6432)
1 W
Tolerance
Resistance
Packing
+10%
+5%
+10%
+5%
+10%
E24
+20%
E24
E24
E24
E24
E24
paper tape
2350 556 13…L
---
paper tape
---
paper tape
---
paper tape
2350 557 10…L
---
paper tape
2350 556 11…L
---
paper tape
2350 556 10…L
---
Quantity
4 000
5 000
2350 554 12…L
2350 550 10…L
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
62
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
Features
•ꢀ Higher maximum working voltage compared to RC series
•ꢀ Extremely thin and light
•ꢀ Reliable electrode construction
•ꢀ Compatible with lead containing and lead-free soldering
processes
•ꢀ Highly stable in auto-placement surface mounting
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
100
resistive layer
80
60
40
inner electrode
termination (Ni / matte tin)
20
155
inner electrode
-55
-40
-20
0
20
40
60
80
100 120 140 160
ceramic substrate
Ambient Temperature ( C)
Dimensions
I1
I1
Type
L
W
H
I1
I2
RV0603
RV0805
RV1206
RV2512
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
6.35 ±0.10
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
3.10 ±0.15
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.60 ±0.20
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.50 ±0.20
H
I2
I2
W
L
unit: mm
63
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
Electrical characteristics
Power
P70
Operating Temp.
range
Type
MWV
350V
RCOV
500V
DWV
500V
Resistance range & tolerance
T. C. R.
E24 ±5%
10KΩꢀ≤ꢀRꢀ≤ꢀ1MΩ
E24/E96ꢀ±1%
RV0603
1/10W
1/8W
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
E24 ±5%
RV0805
400V
800V
800V
100KΩꢀ≤ꢀRꢀ≤ꢀ10MΩ
E24/E96ꢀ±1%
±200ꢀppm/°C
E24 ±5% 100KΩꢀ≤ꢀRꢀ≤ꢀ27MΩ
E24/E96ꢀ±1% 100KΩꢀ≤ꢀRꢀ≤ꢀ10MΩ
RV1206
RV2512
1/4W
-55°Cꢀtoꢀ+155°C
-55°Cꢀtoꢀ+155°C
500V
500V
1000V
1000V
1000V
1000V
1W
E24 ±5% 4.7MΩꢀ≤ꢀRꢀ≤ꢀ16MΩ
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(2%ꢀ+0.05Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
High temperature exposure
±(1%ꢀ+0.05Ω)
±(2%ꢀ+0.05Ω)
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 106F
Moisture resistance
Thermal shock
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
±(0.5%ꢀ+0.05Ω)ꢀforꢀ10Kꢀtoꢀ10M
±(1%ꢀ+0.05Ω)ꢀforꢀothers
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)
No visible damage
Wetting
Solderability
Resistance to
soldering heat method 210F
MIL-STD-202G-
Lead-free solder, 260°C, 10 sec-
onds immersion time
±(1%ꢀ+0.05Ω)
No visible damage
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which- ±(2%ꢀ+0.05Ω)
ever is less for 5 seconds at room temperature No visible damage
Short time overload
64
1Mꢀ =ꢀ1MΩ
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: RV0805JR-07100KL
R V 0 8 0 5
J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
RV = High voltage
Default code(1/2) (code 17)
Resistance (code 12-16)
100Kꢀ=ꢀ100KΩ
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
2512 = 6.35 x 3.2
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Tolerance (code 7)
F = ±1%
T. C. R. (code 9)
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
J = ±5%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
High voltage chip resistors
Size: inch (mm)
Power
0805 (2012)
1206 (3216)
2512 (6432)
1 W
1/8ꢀW
1/4ꢀW
Tolerance
Resistance
Packing
+5%
+1%
+5%
+1%
+5%
E24
E24ꢀ/ꢀE96
E24
E24ꢀ/ꢀE96
E24
paper tape
paper tape
blister tape
2322 762 98...L
---
Quantity
---
---
---
---
4 000
5 000
2322 792 61...L
2322 793 6....L
2322 790 61...L
2322 791 6....L
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
65
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
Features
•ꢀ Reducedꢀsizeꢀofꢀfinalꢀequipment
•ꢀ Low assembly costs
•ꢀ Higher component and equipment reliability
•ꢀ Improved performance at high frequency
•ꢀ Low noise, when not trimmed
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
overcoat
resistive layer
inner electrode
termination
70
100
80
60
ceramic substrate
TR0805-
TR1206
40
20
TR0402-
TR0603
155
125
-55
-40
-20
0
20
40
60
80
100 120 140 160
Ambient Temperature ( C)
Dimensions
I1
I1
Type
L
W
H
I1
I2
TR0402
TR0603
TR0805
TR1206
1.00 ±0.10
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
0.35 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
H
I2
I2
W
L
unit: mm
66
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
Electrical characteristics
Power Operating Temp.
T. C. R.
Resistance range & tolerance
Type
MWV RCOV DWV
P70 range
(ꢀppm/°C)
TR0402 1/16W -55°Cꢀtoꢀ+125°C
TR0603 1/16W -55°Cꢀtoꢀ+125°C
50V
50V
100V
100V
300V
500V
100V
100V
500V
500V
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω ±200
10Ωꢀ<ꢀRꢀ≤ꢀ1MΩ ±100
1MΩꢀ<ꢀRꢀ≤ꢀ10MΩ ±200
E24ꢀ+0/-10%,ꢀ+0/-20%,ꢀ+0/-30% 1Ωꢀ≤ꢀRꢀ≤ꢀ10MΩ
TR0805 1/8W
TR1206 1/4W
-55°Cꢀtoꢀ+155°C 150V
-55°Cꢀtoꢀ+155°C 200V
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
±(1%ꢀ+0.05Ω)
±(1%ꢀ+0.05Ω)
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
High temperature exposure
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
MIL-STD-202G-
method 106F
Moisture resistance
Thermal shock
±(2%ꢀ+0.05Ω)
±(1%ꢀ+0.05Ω)
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)
No visible damage
Wetting
Solder-
ability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(1%ꢀ+0.05Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room temperature
±(1%ꢀ+0.05Ω)
No visible damage
Short time overload
67
100Rꢀ=ꢀ100Ω
Mꢀ=ꢀ0/-20%
Nꢀ=ꢀ0/-30%
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: TR0603MR-07100KL
T R 0 6 0 3 M R
―
0 7 1 0 0 K
L
Series name (code 1-2)
TR = Trimmable
Default code(1/2) (code 17)
Resistance (code 12-16)
10Rꢀ =ꢀ10Ω
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
100Kꢀ=ꢀ100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Tolerance (code 7)
ꢀKꢀ=ꢀ0/-10%
T. C. R. (code 9)
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Packing style (code 8 )
R = Paper tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Trimmable chip resistors
Size: inch (mm)
Power
0402 (1005)
1/16ꢀW
0603 (1608)
1/10ꢀW
0805 (2012)
1206 (3216)
1/4ꢀW
1/8ꢀW
E24
Tolerance
E24
E24
E24
Resistance
Packing
paper tape
2350 503 21…L
2350 503 20…L
on request
paper tape
2350 502 11…L
2350 502 10…L
on request
paper tape
2350 501 11…L
2350 511 10…L
on request
paper tape
2350 500 11…L
2350 500 10…L
2322 724 94…L
---
Quantity 5ꢀ000ꢀꢀ0/-20%
5ꢀ000ꢀꢀ0/-30%
2322 792 61...L
2322 793 6....L
2322 791 6....L
Europe
5 000
For ordering rules: Seeꢀpageꢀ14ꢀforꢀE24ꢀ/ꢀE96ꢀvaluesꢀandꢀtheꢀlastꢀ4ꢀorꢀ3ꢀdigitsꢀofꢀtheꢀ12NCꢀcatalogueꢀnumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
68
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
Features
•ꢀ Superior resistance against sulfur containing atmosphere
•ꢀ Hightly reliable multilayer electrode construction
•ꢀ Compatible with all soldering processes
•ꢀ Highly stable in auto-placement surface mounting applications
•ꢀ Barrier layer end termination
•ꢀ Halogen free product and production
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
100
resistive layer
80
60
40
inner electrode
20
termination (Ni / matte tin)
155
inner electrode
-55
-40
-20
0
20
40
60
80
100 120 140 160
ceramic substrate
Ambient Temperature ( C)
Dimensions
Type
L
W
H
l1
l2
I1
I1
AF0201
AF0402
AF0603
AF0805
AF1206
AF1210
AF1218
AF2010
AF2512
0.60±0.03
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10±0.10
3.10±0.10
5.00±0.10
6.35±0.10
0.30±0.03
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60±0.15
4.60±0.10
2.50±0.15
3.10±0.15
0.23 ±0.03
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55±0.10
0.55±0.10
0.10±0.05
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45±0.15
0.45±0.20
0.55±0.15
0.60±0.20
0.15±0.05
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50±0.20
0.40±0.20
0.50±0.20
0.50±0.20
H
I2
I2
W
L
unit: mm
69
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
Electrical characteristics
Power Operating Temp.
T. C. R.
(ꢀppm/°C)ꢀ
Jumper criteria
(unit: A)
Type
MWV RCOV DWV Resistance range & tolerance
P70
range
E24 ±5% 1Ω ≤ R ≤ 10MΩ
AF0201 1/20W -55°Cꢀtoꢀ+125°C 25V 50V 50V E24/E96ꢀ±1% 1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω -100/+350 Rated current 0.5
10Ωꢀ<ꢀRꢀ≤ꢀ10MΩ ±200
Max. current 1.0
Rated current 1.0
Max. current 2.0
AF0402 1/16Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 50V 100V 100V
Rated current 1.0
Max. current 2.0
AF0603 1/10Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 50V 100V 100V
E24 ±5% 1Ωꢀ≤ꢀRꢀ≤ꢀ22MΩꢀ
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ω ±200
E24/E96ꢀ±1% 1Ωꢀ≤ꢀRꢀ≤ꢀ10MΩꢀ 10Ωꢀ<ꢀRꢀ≤ꢀ10MΩ ±100
Rated current 2.0
Max. current 5.0
Jumper <ꢀ50mΩ
10MΩꢀ<ꢀRꢀ≤ꢀ22MΩꢀ ±200
AF0805 1/8Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 150V 300V 300V
AF1206 1/4Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 200V 400V 500V
AF1210 1/2W -55°Cꢀtoꢀ+155°C 200V 500V 500V
AF1218 1W -55°Cꢀtoꢀ+155°C 200V 500V 500V
AF2010 3/4W -55°Cꢀtoꢀ+155°C 200V 500V 500V
AF2512 1W -55°Cꢀtoꢀ+155°C 200V 500V 500V
Rated current 2.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
E24 ±5% 1Ω ≤ R ≤ 10MΩ
E24/E96ꢀ±1% 1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
1Ω ≤ R ≤ 10Ω ±200
10Ω < R ≤ 10MΩ ±100
Rated current 2.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
Life
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
±(1%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
High temperature exposure
Moisture resistance
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.Hꢀ
±(0.5%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
±(1%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ100mΩꢀforꢀjumper
MIL-STD-202G-
method 106F
±(0.5%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
±(1%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ100mΩꢀforꢀjumper
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300ꢀ
Maximum transfer time is 20 seconds
Thermal shock
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50Xꢀ
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%ꢀcovered)ꢀ
No visible damage
Wetting
J-STD-002B testB
Solderability
Resistance to
soldering heat
MIL-STD-202G-
method 210F
±(1%ꢀ+0.05Ω)
No visible damage
Lead-free solder, 260°C, 10 seconds immersion time
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
±(1%ꢀ+0.05Ω)
No visible damage
Short time overload
Anti-FOS
Sulfur (saturated vapor) 1000 hours, 60±2°C, 91~93
%RH, Rating with no power
ASTM-B-809-95
±(1%ꢀ+0.05Ω)
70
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
Global part number - Preferred type
Ordering example: AF0603JR-07100KL
A F 0 6 0 3
J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
AF = Anti-sulfurated
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10Rꢀꢀꢀ=ꢀ10Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0201 = 0.6 x 0.3
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 1.6
1218 = 3.2 x 2.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Tolerance (code 7)
F = ±1%
J = ±5% (for Jumper ordering)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀourꢀRSMDꢀproductsꢀmeetꢀRoHSꢀCompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for order only
ꢀ
3.ꢀAFꢀseriesꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
71
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Features
•ꢀ Superior resistance against sulfur containing atmosphere
•ꢀ Highly reliable multilayer electrode construction
•ꢀ Compatible with all soldering processes
•ꢀ Highly stable in auto-placement surface mounting applications
•ꢀ Barrier layer end termination
•ꢀ Halogen free product and production
Schematics
Dimensions
AF122
AF124
H
H
P
a
T
B
B
W1
W2
Side view for all types
P
L
a
H1
L
Type
Hꢀ/ꢀH1
B
P
L
T
W1
W2
AF122
0.30ꢀ+0.10/-0.05
0.24 ± 0.10 0.67 ± 0.05 1.00 ± 0.10
0.30 ±0.10
0.25 ± 0.10 1.00 ± 0.10
H : 0.45 ± 0.05
H1 : 0.30 ± 0.05
AF124
0.20 ± 0.15 0.50 ± 0.05 2.00 ± 0.10 0.45 ± 0.10 0.30 ± 0.15 1.00 ± 0.10
72
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Electrical characteristics
Power Operating Temp.
Jumper criteria
Type
MWV RCOV DWV Resistance range & tolerance
T. C. R.
rating
range
(unit: A)
Rated current 0.5A
Max. current 1.0A
AF122 1/16Wꢀ -55°Cꢀtoꢀ+125°Cꢀ 50V 100V 100V
AF124 1/16W -55°Cꢀtoꢀ+155°Cꢀ 25V 50V 100V
E24 ±5% 1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩꢀ
E24/E96ꢀ±1% 1Ωꢀ≤ꢀRꢀ≤ꢀ1MΩꢀ
Jumper <ꢀ50mΩ
1Ωꢀ≤ꢀRꢀ<ꢀ10Ω ±250ppm/°C
10Ωꢀ<ꢀRꢀ<ꢀ1MΩꢀ ±200ppm/°C
Rated current 1.0A
Max. current 2.0A
Environmental characteristics
Performance test
Test method
Procedure
Requirements
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
Life
MIL-STD-202G-
method 108A
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification,ꢀunpoweredꢀ
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
High temperature exposure
Moisture resistance
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.Hꢀ
MIL-STD-202G-
method 106F
±(2%ꢀ+0.05Ω)ꢀ
<ꢀ50mΩꢀforꢀjumper
±(0.5%ꢀ+0.05Ω)ꢀforꢀ10Kꢀtoꢀ10M
±(1%ꢀ+0.05Ω)ꢀforꢀothers
<ꢀ50mΩꢀforꢀjumper
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300ꢀ
Maximum transfer time is 20 seconds
Thermal shock
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50Xꢀ
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Wetting
J-STD-002B testB
Wellꢀtinnedꢀ(≥95%ꢀcovered)ꢀ
Solderability
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
No visible damage
Resistance to
soldering heat
MIL-STD-202G-
method 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(2%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
No visible damage
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
Short time overload
Anti-FOS
Sulfur (saturated vapor) 1000 hours, 60±2°C, 91~93
%RH, Rating with no power
ASTM-B-809-95
±(1%ꢀ+0.05Ω)
73
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Global part number - Array
Ordering example: AF122-JR-07100KL
A F 12
2
― J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
Default code(code 17)
AF = Array (convex)ꢀthickꢀfilm
Resistance (code 12-16)
0R = Jumper
10Rꢀꢀꢀ=ꢀ10Ω
Size code (inch) (code 3-4)
12 = 0402 x 2 (0404)
0402 x 4 (0408)
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
Number of resistor (code 5)
2 = 2 resistors
4 = 4 resistors
T. C. R. (code 9)
Schematic (code 6)
“―”ꢀ=ꢀBasedꢀonꢀspec.
"─"ꢀ=ꢀBasedꢀonꢀspec.
Packing style (code 8)
R = Paper tape reel
Tolerance (code 7)
F = ± 1%
ꢀJꢀ=ꢀ±ꢀ5%ꢀ(forꢀjumperꢀordering)
Note:ꢀ1.ꢀAllꢀourꢀRSMDꢀproductsꢀmeetꢀRoHSꢀCompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for order only
74
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Features
•ꢀ AEC-Q200ꢀqualified
•ꢀ Production part approval process (PPAP) support
•ꢀ High reliability
•ꢀ High quality level
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
resistive layer
70
100
80
60
40
inner electrode
termination (Ni / matte tin)
20
155
inner electrode
ceramic substrate
-55
-40
-20
0
20
40
60
80
100 120 140 160
Ambient Temperature ( C)
Dimensions
Type
L
W
H
l1
l2
I1
I1
AC0402
AC0603
AC0805
AC1206
AC1210
AC1218
AC2010
AC2512
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
6.35 ±0.10
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
4.60 ±0.10
2.50 ±0.15
3.10 ±0.15
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45 ±0.15
0.45 ±0.20
0.55 ±0.15
0.60 ±0.20
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
H
I2
I2
W
L
unit: mm
75
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Electrical characteristics
Operating
Temp.
range
Power
P70
T. C. R.
(ꢀppm/°C)ꢀ
Jumper criteria
(unit: A)
Type
MWV RCOV DWV
Resistance range & tolerance
Rated current 1.0
Max. current 2.0
AC0402 1/16Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 50V 100V 100V
AC0603 1/10Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 50V 100V 100V
AC0805 1/8Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 150V 300V 300V
AC1206 1/4Wꢀ -55°Cꢀtoꢀ+155°Cꢀ 200V 400V 500V
AC1210 1/2W -55°Cꢀtoꢀ+155°C 200V 500V 500V
AC1218 1W -55°Cꢀtoꢀ+155°C 200V 500V 500V
AC2010 3/4W -55°Cꢀtoꢀ+155°C 200V 500V 500V
AC2512 1W -55°Cꢀtoꢀ+155°C 200V 500V 500V
Rated current 1.0
Max. current 2.0
Rated current 2.0
Max. current 5.0
Rated current 2.0
Max. current 10.0
E24 ±5% 1Ωꢀ≤ꢀRꢀ≤ꢀ10MΩ
E24/E96ꢀ±0.5%,ꢀ±1% 1Ωꢀ≤ꢀRꢀ≤ꢀ10MΩ
Jumper <ꢀ0.05Ω
1Ωꢀ≤ꢀRꢀ≤ꢀ10Ωꢀ ±200
10Ωꢀ<ꢀRꢀ≤ꢀ10ꢀMΩ ±100
Rated current 2.0
Max. current 10.0
Rated current 6.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
Environmental characteristics
Performance test
Test method
Procedure
Requirements
AEC-Q200-REV C-Test 8
MIL-STD-202 Method 108
1 000 hours at 125°C applied RCWV
1.5 hours on, 0.5 hours off
±(1%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
Life
AEC-Q200-REV C-Test 3
MIL-STD-202 Method 108
1 000 hours at maximum operating temperature
dependingꢀonꢀspecification
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
High temperature exposure
Moisture resistance
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀas
8ꢀhoursꢀ(methodꢀ106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀ
forꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H.
±(0.5%ꢀ+0.05Ω)ꢀforꢀ1%ꢀtol.
±(2%ꢀ+0.05Ω)ꢀforꢀ5%ꢀtol.
<ꢀ100mΩꢀforꢀjumper
AEC-Q200-REV C-Test 6
MIL-STD-202 Method 106
1ꢀ000ꢀhours;ꢀ+ꢀ85°Cꢀ85%ꢀR.H.;ꢀ10%ꢀofꢀoperatingꢀ
power
Measured at 24 ±2 hours after test
AEC-Q200-REV C-Test 7
MIL-STD-202 Method 103
±(1%ꢀ+0.05Ω)
<ꢀ100mΩꢀforꢀjumper
Biased humidity
Thermal shock
AEC-Q200-REV C-Test 16 LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300ꢀ
±(1%ꢀ+0.05Ω)
<ꢀ50mΩꢀforꢀjumper
MIL-STD-202 Method 107
Maximum transfer time is 20 seconds
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50Xꢀ
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%ꢀcovered)ꢀ
No visible damage
AEC-Q200-REV C-Test 18
J-STD-002B testB
Wetting
Solderability
±(1%ꢀ+0.05Ω)
Resistance to AEC-Q200-REV C-Test 15
soldering heat MIL-STD-202 Method 215
Lead-free solder, 260°C, 10 seconds immersion time <ꢀ50mΩꢀforꢀjumper
No visible damage
±(1%ꢀ+0.05Ω)
2.5 times RCWV or maximum overload voltage
<ꢀ100mΩꢀforꢀjumper
MIL-R-55342D-
para 4.7.5
Short time overload
whichever is less for 5 seconds at room temperature
No visible damage
76
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: AC0603JR-07100KL
A C 0 6 0 3
J
R
―
0 7 1 0 0 K
L
Series name (code 1-2)
AC = Automotive grade
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10Rꢀꢀꢀ=ꢀ10Ω
Size code (code 3-6)
ꢀ(inchꢀ/ꢀmetric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
100Rꢀ=ꢀ100Ω
100Kꢀ=ꢀ100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
Tolerance (code 7)
F = ±1%
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Jꢀ=ꢀ±5%ꢀ(forꢀjumperꢀordering)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
ꢀ
3.ꢀACꢀseriesꢀproductsꢀareꢀavailableꢀbyꢀ"Globalꢀpartꢀnumber"ꢀonly
77
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
Features
•ꢀ Reduce system size
•ꢀ Low assembly cost
•ꢀ Higher component and system reliability
•ꢀ Suitable for applications of mobile phones, receivers,
battery chargers, palmtop computers and tablets
Derating curve
Construction
Schematics
Maximum dissipation (P) in percent-
age of rated power as a function of the
operating ambient temperature (Tamb).
ATV 321
The rectangular marker designates input pin 1
1 3
1
3
70
100
R1
attenuated
80
60
40
input signal
output signal
R2
R2
20
2
4
125
2
4
-55
-40
-20
0
20
40
60
80
100 120 140 160
Ambient Temperature ( C)
Dimensions
L
P
A
T
B
D
W
unit: mm
Type
ATV321
L
W
T
A
B
P
D
1.00 ±0.10
1.00 ±0.10
0.35 ±0.05
0.33 ±0.10
0.15 ±0.10
0.65 ±0.10
0.25 ±0.10
78
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
Electrical characteristics
Power
P70
Operating Temp.
VSWR
(Max.)
Type
MPV
50V
Impedance Attenuation range & tolerance
-1dB to -5dB ±0.3 dB
Frequency range
range
-1dB to -10dB DC to 2.5 GHz
-15dB to -20dB DC to 2.0 GHz
-6dB to -10dB ±0.5 dB
ATV321 40mW
-55°Cꢀtoꢀ+125°C
1.3
50Ω
-15dB ±1.0 dB
-20dB ±2.0 dB
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Max.: ±0.3 dB
MIL-STD-202G-
method 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Life
Humidity
(steady state)
1ꢀ000ꢀhours,ꢀ40ꢀ±2°C,ꢀ93(+2/-3)%ꢀRH
RCWV applied for 1.5 hours on and 0.5 hour off
JIS C 5202 7.5
Max.: ±0.3 dB
MIL-STD-202G-
method 106F
Eachꢀtemperatureꢀ/ꢀhumidityꢀcycleꢀisꢀdefinedꢀasꢀ8ꢀhoursꢀ(methodꢀ
106F),ꢀ3ꢀcyclesꢀ/ꢀ24ꢀhoursꢀforꢀ10dꢀwithꢀ25°Cꢀ/ꢀ65°Cꢀ95%ꢀR.H
Moisture resistance
Thermal shock
Max.: ±0.3 dB
Max.: ±0.3 dB
MIL-STD-202G-
method 107G
LCTꢀ/ꢀUCT,ꢀnumberꢀofꢀcyclesꢀrequiredꢀisꢀ300
Maximum transfer time is 20 seconds
Electricalꢀtestꢀnotꢀrequired.ꢀMagnificationꢀ50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
J-STD-002B
testB
Well tinned
(≥95%ꢀcovered)
Wetting
Solder-
ability
Resistance to
soldering heat method 210F
MIL-STD-202G-
Lead-free solder, 260°C, 10 seconds immersion time
Max.: ±0.1 dB
Max.: ±0.3 dB
MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage whichever is
less for 5 seconds at room temperature
Short time overload
79
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
Globalꢀpartꢀnumberꢀ-ꢀPreferredꢀtypeꢀforꢀorderingꢀYageoꢀ/ꢀPhycompꢀbrandedꢀproducts
Ordering example: ATV321CR-071DBL
AT V 3 2 1 C R
―
0 7 1 D B
L
Series name (code 1-2)
Default code(1/2) (code 16)
ATꢀ=ꢀꢀRFꢀattenuatorꢀthickꢀfilm
Attenuation (code 12-15)
Size code (code 3-6)
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ(inchꢀ/ꢀmetric)
V321 = 0404 = 1.0 x 1.0
0dB
-1dB
-2dB
-10dB
-15dB
-20dB
Tolerance (code 7)
C = ±0.3dB
D = ±0.5dB
F = ±1dB
Taping reel (code 10-11)
07 = 7 inch Dia. reel
G = ± 2dB
Packing style (code 8 )
T. C. R. (code 9)
Rꢀ=ꢀPaper/PEꢀtapeꢀreel
“―”ꢀ=ꢀBasedꢀonꢀspec.
(―ꢀforꢀthickꢀfilmꢀonly)
Note:ꢀ1.ꢀAllꢀofꢀourꢀRSMDꢀproductsꢀareꢀRoHSꢀcompliant.ꢀ"LFP"ꢀofꢀtheꢀinternalꢀ2Dꢀreelꢀlabelꢀmentionsꢀ"LeadꢀFreeꢀProcess"ꢀ
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Packing
paper tape
Quantity 10 000
Remark
2350 703 11…L
Forꢀlastꢀthreeꢀdigits,ꢀseeꢀfollowingꢀtableꢀ"Attenuationꢀcodes"
Note: L = Default code
Phycomp CTC ordering code - Traditional type - North America
Packing
paper tape
Quantity 10 000
9CV3218AXXXXX-PF3
Remark
Forꢀlastꢀ9thꢀtoꢀ13thꢀdigits,ꢀseeꢀfollowingꢀtableꢀ"Attenuationꢀcodes"
Attenuation codes
Standard
Value
(dB)
Tolerance
(dB)
Phycomp worldwide code
(12NC)
Phycomp North America code
(NA code)
01DBC
02DBC
03DBC
04DBC
05DBC
06DBD
07DBD
08DBD
09DBD
10DBD
15DBF
20DBG
1
2
±0.3
±0.3
±0.3
±0.3
±0.3
±0.5
±0.5
±0.5
±0.5
±0.5
±1.0
±2.0
012
022
032
042
052
063
073
083
093
103
154
205
3
4
5
6
7
8
9
10
15
20
80
Chip Resistors Engineering Design Kits
Engineering design kits/ Engineering design books
Thickꢀfilmꢀchipꢀresistors
Global CTC
(Preferred)
Max.
power
Resistance Resistor Min.
Description
Size
Tolerance
range
pieces items
RC0100-R-SKE24L RC0100,ꢀ±1%ꢀ&ꢀ±5%ꢀ,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC0201-R-SKE24L RC0201,ꢀ±1%ꢀ&ꢀ±5%ꢀ,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC0402JR-SKE24L RC0402,ꢀ±5%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC0402FR-SKE96L RC0402,ꢀ±1%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC0603JR-SKE24L RC0603,ꢀ±5%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC0603FR-SKE96L RC0603,ꢀ±1%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC0805JR-SKE24L RC0805,ꢀ±5%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC0805FR-SKE96L RC0805,ꢀ±1%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC1206JR-SKE24L RC1206,ꢀ±5%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
RC1206FR-SKE96L RC1206,ꢀ±1%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper
01005
0201
0402
0402
0603
0603
0805
0805
1206
1206
Fꢀ/ꢀJ
1/32W
1/20ꢀW
1/16ꢀW
1/16ꢀW
1/10ꢀW
1/10ꢀW
1/8ꢀW
10 - 1M
10 - 1M
10 - 1M
10 - 1M
10 - 1M
10 - 1M
10 - 1M
10 - 1M
10 - 1M
10 - 1M
100
100
100
100
50
100
120
110
450
110
450
110
280
110
350
Fꢀ/ꢀJ
J
F
J
F
50
J
50
F
1/8ꢀW
50
J
1/4ꢀW
50
F
1/4ꢀW
50
Thickꢀfilmꢀarrayꢀchipꢀresistorsꢀ(convex)
Global CTC
Description
(Preferred)
Max.
power
Resistance Resistor Min.
Size
Tolerance
J
range
pieces items
0402 X 2
0402 X 4
YC12X-JR-SK001L YC124ꢀ/ꢀYC122,ꢀ±5%,ꢀ+Jumper,ꢀRoHSꢀcompliant,ꢀ
1/16ꢀW
10 - 1M
100 75
Engineering design kit for current sensing application
Global CTC
Description
(Preferred)
Max.
power
Resistance Resistor Min.
Size
Tolerance
range
pieces items
CS0402-R-SK001L RL0402 - RL2512, ±1% & ±5%, RoHS compliant
0402 - 2512
Fꢀ/ꢀJ
---
100m - 910m
30 160
Engineering design kit for mobile application
Global CTC
Description
(Preferred)
Max.
power
Resistance Resistor Min.
Size
---
Tolerance
---
range
pieces items
MD0402-R-SK001L Chipꢀresistorsꢀ/ꢀMLCCꢀ/ꢀAttenuators
---
---
50 - 100 44
Note: Before ordering, please contact our sales force for detail of resistance
Engineering design kit for automotive application
Global CTC
Description
(Preferred)
Max.
power
Resistance Resistor Min.
Size
Tolerance
range
pieces items
AC0402-R-SK001L AC0402ꢀ-ꢀAC1206,ꢀ±1%ꢀ&ꢀ±5%,ꢀRoHSꢀcompliant,ꢀ+ꢀJumper 0402 - 1206
F/J
---
1 - 10M
50-100 200
Engineering design kit for general purpose
Max.
power
Resistance Resistor
Global CTC
Description
Size
Tolerance
---
Items
range
pieces
RC0402-R-SK001L Chipꢀresistorsꢀ/ꢀMLCC
0402 - 1206
---
---
50-100 472
Engineeringꢀdesignꢀbookꢀforꢀthinꢀfilmꢀchipꢀresistor
Max.
power
Resistance Resistor
Global CTC
Description
RT0402 - RT1206, E96 series, ±0.1%, RoHS compliant
Size
Tolerance
B
Items
60
range
pieces
RT0402-R-SB001L
0402 - 1206
---
10 ~ 1M
10
Engineering design book for automotive application
Max.
power
Resistance Resistor
Global CTC
Description
Size
Tolerance
F
Items
60
range
pieces
AC0402-R-SB001L AC0402 - AC1206, E96 series, ±1%, RoHS compliant
0402 - 1206
---
10 ~ 1M
10
Engineering design book for current sensing application
Max.
power
Resistance Resistor
Global CTC
Description
Size
Tolerance
F
Items
60
range
pieces
PE0603-R-SB001L
PA/PE/PR,ꢀ±1%,ꢀRoHSꢀcompliant,ꢀlowꢀT.C.R.
0603 - 2512
---
0.5m ~ 50m
10
81
SMD CERAMIC MULTILAYER CAPACITORS
MLCC General Information
Specification overview
Specificationꢀoverview
TC
code
Description
Series
Capacitance range Voltage range
Size
01005, 0201, 0402, 0603,
0805, 1206, 1210,1812
General purpose
0.47 pF to 22 nF
10V to 50 V
NPO
X7R
0402, 0603, 0805, 1206,
1210, 1808, 1812
Medium and High voltage
High frequency
10 pF to 22 nF
100 V to 3000 V
16V to 250 V
0.2 pF to 100 pF
01005, 0201, 0402, 0603, 0805
01005, 0201, 0402, 0603, 0805,
1206, 1210,1812, 2220
General purpose & High capacitance 100 pF to 47 µF
6.3 V to 50 V
Discrete
Medium and High voltage
Low inductance
100 pF to 2.2 µF
10 nF to 220 nF
100ꢀpFꢀtoꢀ1ꢀμF
100 V to 3000 V 0603, 0805, 1206, 1210, 1812
10 V to 50 V
0306, 0508, 0612
Soft termination
16 V to 630 V
0603, 0805,1206, 1210, 1808, 1812
01005, 0201, 0402, 0603,
0805, 1206, 1210,1812
X5R General purpose & High capacitance 100 pF to 100 µF
6.3 V to 50 V
Y5V General purpose & High capacitance 10 nF to 47 µF
6.3 V to 50 V
50 V to 630 V
16 V to 630 V
X1/Y2,ꢀX2/Y3ꢀ
X1/Y2,ꢀX2/Y3ꢀ
50 V
0201, 0402, 0603, 0805, 1206, 1210
0402, 0603, 0805,1206, 1210
0402, 0603, 0805,1206, 1210
1808, 1812
NP0 Automotive grade
X7R Automotive grade
NP0 High voltage SC type
X7R High voltage SC type
NP0 4C arrays
10 pF to 10 nF
Automotive grade
products
100ꢀpFꢀtoꢀ2.2ꢀμF
2.0 pF to 470 pF
150 pF to 1.5 nF
10 pF to 470 pF
180 pF to 100 nF
10 nF to 100 nF
Safetyꢀcertificationꢀ
products
1808, 1812
0508, 0612
C-Arrays
X7R 4C arrays
16 V to 50 V
25 V
0508, 0612
Y5V 4C arrays
0612
84
MLCC General Information
Ordering information - Global part number
Global part number
Ordering example: CC0201KRX7R8BB102
C C 0 2 0 1 K R X 7 R
8 B B 1 0 2
Series name (code 1-2)
Capacitance value (code 15-17)
102 = 1 000 pF
CA = 4 x Capacitors array
CC = Multilayer chip capacitors
CL = Low inductance capacitors
CQ= High frequency capacitors
SCꢀ=ꢀSafetyꢀcertificationꢀcapacitors
AC = Automotive grade capacitors
CS = Soft termination capacitors
(2ꢀsignificantꢀdigits+numberꢀofꢀzeros;ꢀ
theꢀ3rdꢀdigitꢀsignifiesꢀtheꢀmultiplyingꢀ
factor, and letter R is decimal point)
0 = x 1
1 = x 10 1
2 = x 10 2
3 = x 10 3
4 = x 10 4
Size code (code 3-6)
5 = x 10 5
0100
6 = x 10 6
0201
7 = x 10 7
0402
0603
X X R = Special capacitance
(X X: capacitance before decimal point)
0805
1206
1210
Process code (code 14)
N = NP0
1808
1812
B = Class 2 product
2220
0306
0508
Termination (code 13)
B = Ni-Barrier
0612
Capacitance tolerance (code 7)
A = ±0.05 pF (CQ series only)
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
Rated voltage (code 12)
5 = 6.3 V
6 = 10 V
7 = 16 V
G = ±2%
8 = 25 V
J = ±5%
G = 35 V
K = ±10%
9 = 50 V
M = ±20%
0 = 100 V
ꢀZꢀ=ꢀ-20%ꢀtoꢀ+80%
A = 200 V
Y = 250 V
B = 500 V
Packing style (code 8)
Zꢀ=ꢀ630ꢀV
Rꢀ=ꢀPaperꢀ/ꢀPEꢀtapeꢀreelꢀØ7ꢀinch
Pꢀ=ꢀPaperꢀ/ꢀPEꢀtapeꢀreelꢀØ13ꢀinch
Kꢀ=ꢀEmbossedꢀplasticꢀtapeꢀreelꢀØ7ꢀinch
Fꢀ=ꢀEmbossedꢀplasticꢀtapeꢀreelꢀØ13ꢀinch
C = Bulk case
C = 1 kV
D = 2 kV
E = 3 kV
Tꢀ=ꢀX2ꢀ/ꢀY3ꢀforꢀTUVꢀ/ꢀUL
Wꢀ=ꢀX1ꢀ/ꢀY2ꢀforꢀTUVꢀ/ꢀUL
U = X1 for UL (X7R, 1812)
TC material (code 9-11)
NPO
X5R
X7R
Y5V
85
MLCC Selection Charts
Ordering information - Global part number
Global part number
Orderingꢀexample:ꢀCCxxxxKRX5RxBBxxxꢀ(forꢀLowꢀprofile)
C C
1
05
9 K R X 7 R 8 B B 1 0 2
Series name (code 1-2)
Capacitance value (code 15-17)
102 = 1 000 pF
CC = Multilayer chip capacitors
(2ꢀsignificantꢀdigits+numberꢀofꢀzeros;ꢀ
theꢀ3rdꢀdigitꢀsignifiesꢀtheꢀmultiplyingꢀ
factor, and letter R is decimal point)
0 = x 1
Number of cap (code 3)
4 = 4 cap
1 = x 10 1
2 = 2 cap
2 = x 10 2
1 = Single
3 = x 10 3
4 = x 10 4
Size code (code 4-5)
01 = 0201
5 = x 10 5
6 = x 10 6
02 = 0402
7 = x 10 7
03 = 0603
05 = 0805
X X R = Special capacitance
(X X: capacitance before decimal point)
06 = 1206, 0306
08 = 1808, 0508
10 = 1210
Process code (code 14)
N = NP0
12 = 1812, 0612
B = Class 2 product
Thickness (code 6)
3 = 0.3 mm
4 = 0.45 mm
5 = 0.5 mm
6 = 0.6 mm
8 = 0.8 mm
9 = 0.85 mm
A = 1.0 mm
B = 1.25 mm
C = 1.6 mm
D = 2.0 mm
E = 2.5 mm
F = 1.7 mm
M = 1.15 mm
N = 1.35 mm
Q = 1.5 mm
R = 1.8 mm
Termination (code 13)
B = Ni-Barrier
Rated voltage (code 12)
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
0 = 100 V
A = 200 V
B = 500 V
C = 1 kV
D = 2 kV
E = 3 kV
G = 35 V
Y = 250 V
ꢀZꢀ=ꢀ630ꢀV
Capacitance tolerance (code 7)
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
TC material (code 9-11)
F = ±1%
X5R
X7R
G = ±2%
J = ±5%
K = ±10%
M = ±20%
ꢀZꢀ=ꢀ-20%ꢀtoꢀ+80%
Packing style (code 8)
Rꢀ=ꢀPaperꢀ/ꢀPEꢀtapeꢀreelꢀØ7ꢀinch
Pꢀ=ꢀPaperꢀ/ꢀPEꢀtapeꢀreelꢀØ13ꢀinch
Kꢀ=ꢀEmbossedꢀplasticꢀtapeꢀreelꢀØ7ꢀinch
Fꢀ=ꢀEmbossedꢀplasticꢀtapeꢀreelꢀØ13ꢀinch
C = Bulk case
86
MLCC General Information
Thickness classes and packing quantities for all series
Thickness classes and packing quantities
Quantity per reel
Quantity
Thickness
classification
(mm)
Size
Description
180ꢀmmꢀ/ꢀ7”
330ꢀmmꢀ/ꢀ13”
per
code
Tape width
bulk case
Paper
Blister
---
Paper
Blister
---
01005
0.2±0.02
20 000
15 000
10 000
4 000
4 000
4 000
---
---
50 000
50 000
15 000
20 000
15 000
---
---
---
0201
0402
0603
0.3ꢀ±0.03ꢀ/ꢀ±0.05
0.5ꢀ±0.05ꢀ/ꢀ±0.15ꢀ/ꢀ±0.20
0.8ꢀ±0.1ꢀ/ꢀ±0.2
0.6 ±0.1
---
---
---
---
50 000
15 000
10 000
8 000
5 000
---
---
---
---
---
0805
0.85/1.0ꢀ±0.1
1.25 ±0.2
---
---
3 000
---
10 000
---
0.6 ±0.1
4 000
4 000
---
20 000
15 000
---
0.85 ±0.1
---
---
---
1.00ꢀ/ꢀ1.15ꢀ±0.1
1.25 ±0.2
3 000
3 000
2 500
2 000
4 000
4 000
3 000
3 000
3 000
3 000
2 000
2 000
2ꢀ000ꢀ/ꢀ1ꢀ000
1ꢀ000ꢀ/ꢀ500
3 000
3 000
2 000
2 000
2 000
2 000
2 000
1 000
1 000
1 000
1 000
1 000
1 000
1 000
1 500
1 500
---
10 000
10 000
10 000
10 000
15 000
10 000
10 000
10 000
10 000
---
---
1206
---
---
---
1.6 ±0.15
8 mm
---
---
---
1.6ꢀ±0.2ꢀ/ꢀ±0.3
0.6ꢀ/ꢀ0.7ꢀ±0.1
0.85 ±0.1
---
---
---
---
---
---
---
---
---
1.0 ±0.15
---
---
---
1.15 ±0.1
---
---
---
1.15 ±0.15
1.25 ±0.2
---
---
---
1210
---
---
---
Discrete capacitors
1.5 ±0.1
---
---
---
---
1.6ꢀ/ꢀ1.9ꢀ±0.2
2.0 ±0.2
---
---
---
---
---
---
---
---
2.5ꢀ±0.2ꢀ/ꢀ±0.3
1.15 ±0.15
1.25 ±0.2
---
---
---
---
---
---
---
---
---
---
---
---
1.35 ±0.15
1.5 ±0.1
---
---
---
---
1808
---
---
---
---
1.6 ±0.2
---
---
8 000
---
---
2.0 ±0.2
---
---
---
0.6ꢀ/ꢀ0.85ꢀ±0.1
1.15 ±0.1
---
---
---
---
---
---
---
---
12 mm
1.15 ±0.15
1.25 ±0.2
---
---
---
---
---
---
---
---
1812
2220
1.35 ±0.15
1.5 ±0.1
---
---
---
---
---
---
---
---
1.6 ±0.2
---
---
---
---
2.0 ±0.2
---
---
---
---
0.85 ±0.1
---
---
---
---
1.15 ±0.1
0.5 ±0.1
---
---
---
---
0306
0508
0612
0508
0612
4 000
4 000
4 000
4 000
4 000
15 000
15 000
15 000
---
---
---
Low inductance
Arrays
0.85 ±0.1
---
---
---
0.85 ±0.1
8 mm
---
---
---
0.6 ±0.1
---
---
---
0.8 ±0.1
---
---
---
---
87
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 1812
Features
•ꢀ Ultra-stable on capacitance
•ꢀ Tight tolerance available
•ꢀ High reliability
•ꢀ Low ESR
•ꢀ Good frequency performance
•ꢀ No aging of capacitance
Temperature characteristic
Construction
40
TC
- 6
(x10 /K)
20
0
-20
-40
-40
0
40
80
120
T ( C)
Case dimensions
Discrete capacitors - General purpose
Case size designation
Dimensions in mm
Inch-based
01005
0201
Metric
0402M
0603M
1005M
1608M
L1
W
L2ꢀ/ꢀL3
0.07
0.10
0.15
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
L2ꢀ/ꢀL3
L4
min
min
max
0.4±0.02
0.2±0.02
0.14
0.20
0.30
0.60
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.14
0.20
0.40
0.40
0.55
0.55
1.40
1.40
1.40
1.40
2.20
2.20
0.6 ±0.03
0.3 ±0.03
0402
1.0 ±0.05
0.5 ±0.05
0603
1.6 ±0.10
0.8 ±0.10
2.0 ±0.10(1)
2.0 ±0.20(2)
3.2 ±0.15(1)
3.2 ±0.30(2)
3.2 ±0.20(1)
3.2 ±0.40(2)
4.5 ±0.20(1)
4.5 ±0.40(2)
1.25 ±0.10(1)
1.25 ±0.20(2)
1.6 ±0.15(1)
1.6 ±0.20(2)
2.5 ±0.20(1)
2.5 ±0.30(2)
3.2 ±0.20(1)
3.2 ±0.40(2)
0805
1206
1210
1812
2012M
3216M
3225M
4532M
W
L2
L4
L1
L3
Note: 1.ꢀDimensionꢀforꢀsizeꢀ0805ꢀtoꢀ1812,ꢀCꢀ≤ꢀ1ꢀnF
2. Dimension for size 0805 to 1812, C > 1 nF
88
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 0603
NP0
General purpose
16 V
01005
16 V
0201
25 V
0402
25 V
0603
25 V
Capacitance
16 V
50 V
50 V
16 V
50 V
0.22 pF
0.47 pF
0.56 pF
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
0.3 ±0.03
0.3 ±0.03
0.3 ±0.03
12 pF
15 pF
18 pF
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
22 pF
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
27 pF
33 pF 0.2 ±0.02
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
89
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 0603
NP0
General purpose
01005
16 V
0201
25 V
0402
25 V
0603
25 V
Capacitance
16 V
50 V
16 V
50 V
16 V
50 V
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
12 nF
15 nF
18 nF
22 nF
33 nF
39 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
90
MLCC Selection Charts
NPO - General purpose 16 to 50V, 0805 to 1812
NP0
General purpose
1206
0805
25 V
1210
25 V
1210
50 V
1812
50 V
Capacitance
16 V
50 V
16 V
25 V
50 V
0.22 pF
0.47 pF
0.56 pF
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
Tape width
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
91
MLCC Selection Charts
NPO - Gerneral purpose 16 to 50V, 0805 to 1812
NP0
General purpose
0805
25 V
1206
25 V
1210
25 V
1210
50 V
1812
50 V
Capacitance
16 V
50 V
16 V
50 V
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
12 nF
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
15 nF
18 nF
22 nF
2.0 ±0.2
2.0 ±0.2
33 nF
39 nF
47 nF
1.15 ±0.1
1.6 ±0.2
1.15 ±0.1
1.6 ±0.2
1.15 ±0.1
1.6 ±0.2
56 nF
68 nF
82 nF
1.6 ±0.2
1.6 ±0.2
8 mm
1.6 ±0.2
100 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
92
MLCC Selection Charts
NPO - Medium & High voltage, 0402 to 1812
Features
•ꢀ Capable of operating at high voltage levels
•ꢀ For high frequency snubber
•ꢀ Decouplingꢀ/ꢀsmoothingꢀfunction
Temperature characteristic
Construction
40
TC
- 6
(x10 /K)
20
0
-20
-40
-40
0
40
80
120
T ( C)
Dimensions
Discrete capacitors - Medium and High voltage
Case size designation
Dimensions in mm
Inch-based
0402
Metric
1005M
1608M
2012M
3216M
3225M
4520M
4532M
L1
W
L2ꢀ/ꢀL3
0.15
0.20
0.25
0.25
0.25
0.25
0.25
L2ꢀ/ꢀL3
L4
min
min
max
1.0 ±0.05
1.6 ±0.10
2.0 ±0.20
3.2 ±0.30
3.2 ±0.40
4.5 ±0.40
4.5 ±0.40
0.5 ±0.05
0.8 ±0.10
1.25 ±0.20
1.6 ±0.20
2.5 ±0.30
2.0 ±0.30
3.2 ±0.30
0.30
0.60
0.75
0.75
0.75
0.75
0.75
0.40
0.40
0.55
1.40
1.40
2.20
2.20
0603
W
0805
L2
L4
L1
L3
1206
1210
1808
1812
93
MLCC Selection Charts
NPO - Medium voltage, 0402 to 0805
NP0
Medium voltage
0402
0603
0805
Capacitance
100 V
100 V
250 V
100 V
250 V
500 V
630 V
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
0.5 ±0.05
12 pF
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
15 pF
18 pF
22 pF
0.8 ±0.1
27 pF
0.8 ±0.1
0.6 ±0.1
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
Tape width
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
94
MLCC Selection Charts
NPO - Medium voltage, 1206 / 1210
NP0
Medium voltage
630 V
1206
1210
Capacitance
100 V
250 V
500 V
100 V
250 V
500 V
630 V
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
0.6 ±0.1
39 pF
47 pF
56 pF
68 pF
1.25 ±0.2
82 pF
1.25 ±0.2
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
0.6 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
95
MLCC Selection Charts
NPO - High voltage, 0805 to 1210
NP0
High voltage
1206
0805
1210
Capacitance
1000 V
1000 V
2000 V
1000 V
2000 V
10 pF
12 pF
15 pF
18 pF
22 pF
0.85 ±0.1
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
1.25 ±0.2
1.25 ±0.2
82 pF
1.25 ±0.2
1.25 ±0.2
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
96
MLCC Selection Charts
NPO - High voltage, 1808 / 1812
NP0
High voltage
3000 V
1808
1812
Capacitance
1000 V
2000 V
1000 V
2000 V
3000 V
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
1.6 ±0.2
47 pF
1.25 ±0.2
1.25 ±0.2
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
2.0 ±0.2
1.25 ±0.2
12 nF
15 nF
18 nF
22 nF
33 nF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
97
MLCC Selection Charts
NP0 - High frequency, 01005 to 0805
Features
•ꢀ Lowest ESR in high frequency
•ꢀ Ultra small
•ꢀ Noiseꢀfiltering
ESR characteristic
Impendance and ESR @ 20C
1K
100
Z
(Ω)
10
1
ESR
Impendance
100m
100K
1M
10M
100M
1G
10G
Frequency (Hz)
Construction
98
MLCC Selection Charts
NP0 - High frequency, 01005 to 0805
Case dimensions
Discrete capacitors - High Frequency
Case size designation
Dimensions in mm
Inch-based
Metric
0402M
0603M
1005M
1608M
2012M
L1
W
L2ꢀ/ꢀL3
0.07
0.10
0.15
0.20
0.25
L2ꢀ/ꢀL3
L4
min
min
max
01005
0201
0402
0603
0805
0.4 ±0.02
0.6 ±0.03
1.0 ±0.05
1.6 ±0.10
2.0 ±0.10
0.2 ±0.02
0.3 ±0.03
0.5 ±0.05
0.8 ±0.10
1.25 ±0.10
0.14
0.20
0.30
0.60
0.75
0.13
0.20
0.40
0.40
0.55
W
L2
L4
L1
L3
NP0
NP0
High frequency
0201
High frequency
0603
100 V
01005
16 V
0402
25 V
0805
Capaci-
tance
Capaci-
tance
16 V
25 V
16 V
50 V
50 V
250 V
50 V
100 V
250 V
0.2 pF
0.3 pF
0.4 pF
0.5 pF
0.6 pF
0.7 pF
0.8 pF
0.9 pF
1 pF
0.22 pF
0.47 pF
0.56 pF
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
1.2 pF
1.5 pF 0.2 ±0.02 0.3 ±0.03 0.3 ±0.03
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
Tape
0.8 ±0.1 0.8 ±0.1 0.8 ±0.1
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
8 mm
width
Tape
width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
Note: Values in shaded cells indicate thickness class (unit: mm)
99
MLCC Selection Charts
X7R - General purpose & High capacitance, 01005 to 2220
Features
•ꢀ Semi-stable on capacitance and high K
•ꢀ Highꢀvolumetricꢀefficiency
•ꢀ Highly reliable in high temperature application
•ꢀ High insulation resistance
Temperature characteristic
Construction
15
∆C
C
(%)
10
5
0
-5
-10
-15
-55
-25
5
40
65
95
125
T
(
C)
Case dimensions
Discrete capacitors - General purpose & High capacitance
Case size designation
Dimensions in mm
Inch-based
01005
Metric
L1
W
L2ꢀ/ꢀL3
L2ꢀ/ꢀL3
L4
min
min
max
0402M
0.4±0.02
0.2±0.02
0.07
0.14
0.14
0.6 ±0.03
0.6 ±0.05
0.3 ±0.03
0.3 ±0.05
0.10
0.10
0.15
0.15
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.20
0.20
0.30
0.30
0.60
0.60
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.20
0.20
0.40
0.40
0.40
0.40
0.55
0.55
1.40
1.40
1.40
1.40
2.20
2.20
2.20
3.40
0201
0402
0603
0805
1206
0603M
1005M
1608M
2012M
3216M
1.0 ±0.05 (1)
1.0 ±0.20 (2)
1.6 ±0.10 (1)
1.6 ±0.15 (2)
2.0 ±0.10 (1)
2.0 ±0.20 (2)
3.2 ±0.15 (1)
3.2 ±0.30 (2)
3.2 ±0.20 (1)
3.2 ±0.40 (2)
4.5 ±0.40
0.5 ±0.05 (1)
0.5 ±0.20 (2)
0.8 ±0.10 (1)
0.8 ±0.15 (2)
1.25 ±0.10 (1)
1.25 ±0.20 (2)
1.6 ±0.15 (1)
1.6 ±0.20 (2)
2.5 ±0.20 (1)
2.5 ±0.30 (2)
2.0 ±0.30
W
L2
L4
L1
L3
1210
1808
1812
2220
3225M
4520M
4532M
5750M
4.5 ±0.20 (1)
4.5 ±0.40 (2)
5.7 ±0.40
3.2 ±0.20 (1)
3.2 ±0.40 (2)
5.0 ±0.30
Note: 1.ꢀDimensionꢀforꢀsizeꢀ0402,ꢀCꢀ<ꢀ4.7ꢀμF;ꢀ0603,ꢀCꢀ<ꢀ10ꢀμF;ꢀ0805ꢀtoꢀ1812,ꢀCꢀ≤ꢀ100ꢀnF
2.ꢀDimensionꢀforꢀsizeꢀ0402,ꢀCꢀ≥ꢀ4.7ꢀμF;ꢀ0603,ꢀCꢀ≥ꢀ10ꢀμF;ꢀ0805ꢀtoꢀ1812,ꢀCꢀ>ꢀ100ꢀnF
ꢀ
100
MLCC Selection Charts
X7R - General purpose & High Capacitance , 01005 to 0402
X7R
General purpose
01005
6.3 V
0201
16 V
0402
16 V
Capacitance
10 V
6.3 V
10 V
25 V
50 V
6.3 V
10 V
25 V
50 V
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
0.3 ±0.03
330 pF 0.2 ±0.02 0.2 ±0.02
470 pF
680 pF
1.0 nF
0.3 ±0.03 0.3 ±0.03 0.3 ±0.03 0.3 ±0.03
1.5 nF
2.2 nF
3.3 nF
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
0.5 ±0.05 0.5 ±0.05
0.5 ±0.05
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
101
MLCC Selection Charts
X7R - General purpose & High capacitance, 0603 / 0805
X7R
General purpose
0603
0805
16 V
Capacitance
6.3 V
10 V
16 V
25 V
50 V
6.3 V
10 V
25 V
50 V
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
15 nF
22 nF
33 nF
47 nF
68 nF
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
0.8 ±0.1
0.8 ±0.1
1.25 ±0.2
1.25 ±0.2
0.8 ±0.15
1.25 ±0.2
1.25 ±0.2
22 µF
47 µF
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
102
MLCC Selection Charts
X7R - General purpose & High capacitance, 1206 to 2220
X7R
General purpose
1206
16 V
1210
16 V
1812
50 V
2220
50 V
Capacitance
6.3 V
10 V
25 V
50 V
6.3 V
10 V
25 V
50 V
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
0.85 ±0.1
10 nF 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
15 nF
0.85 ±0.1
0.85 ±0.1
22 nF
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
33 nF
47 nF
68 nF
100 nF
150 nF
1.15 ±0.1
220 nF
1.15 ±0.1 1.15 ±0.1
330 nF
0.85 ±0.1
1.0 ±0.1
0.85 ±0.1
1.15 ±0.1
470 nF
1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1
1.25 ±0.2 1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
680 nF
1.25 ±0.2
1.6 ±0.2
1000 nF 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1
2.2 µF
1.6 ±0.2
1.9 ±0.2
2.5 ±0.2
4.7 µF
1.9 ±0.2 1.9 ±0.2 1.9 ±0.2 1.9 ±0.2
1.6 ±0.2 1.6 ±0.2
10 µF 1.6 ±0.2 1.6 ±0.2
22 µF
47 µF
2.5 ±0.2 2.5 ±0.2
2.5 ±0.2 2.5 ±0.2
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
103
MLCC Selection Charts
X7R - Medium & High voltage, 0402 to 1812
Features
•ꢀ Capable of operating at high voltage levels
•ꢀ For high frequency snubber
•ꢀ Decouplingꢀ/ꢀsmoothingꢀfunction
Temperature characteristic
Construction
15
∆C
C
(%)
10
5
0
-5
-10
-15
-55
-25
5
40
65
95
125
T
(
C)
Dimensions
Discrete capacitors - Medium and High voltage
Case size designation
Dimensions in mm
Inch-based
0402
Metric
1005M
1608M
2012M
3216M
3225M
4520M
4532M
L1
W
L2ꢀ/ꢀL3
0.15
0.20
0.25
0.25
0.25
0.25
0.25
L2ꢀ/ꢀL3
L4
min
min
max
1.0 ±0.05
1.6 ±0.10
2.0 ±0.20
3.2 ±0.30
3.2 ±0.40
4.5 ±0.40
4.5 ±0.40
0.5 ±0.05
0.8 ±0.10
1.25 ±0.20
1.6 ±0.20
2.5 ±0.30
2.0 ±0.30
3.2 ±0.30
0.30
0.60
0.75
0.75
0.75
0.75
0.75
0.40
0.40
0.55
1.40
1.40
2.20
2.20
0603
W
0805
L2
L4
L1
L3
1206
1210
1808
1812
104
MLCC Selection Charts
X7R - Medium and High voltage, 0402 to 0805
X7R
Medium voltage & High voltage
0402
0603
0805
Capacitance
100 V
100 V
250 V
100 V
250 V
500 V
630 V
1000 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.85 ±0.1
0.8 ±0.1
0.85 ±0.1
0.5 ±0.05
0.85 ±0.1
0.85 ±0.1
0.6 ±0.1
0.8 ±0.1
1.25 ±0.2
1.25 ±0.2
15 nF
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
105
MLCC Selection Charts
X7R - Medium and High voltage, 1206 / 1210
X7R
Medium voltage & High voltage
1206
1210
630 V
Capacitance
100 V
250 V
500 V
630 V
1000 V
2000 V
100 V
250 V
500 V
1000 V
2000 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
3.3 nF 0.85 ±0.1
4.7 nF
1.25 ±0.2 1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
6.8 nF
10 nF
1.25 ±0.2
15 nF
0.85 ±0.1
22 nF
1.6 ±0.2 1.6 ±0.2 1.6 ±0.2
1.6 ±0.2
33 nF
1.6 ±0.2
1.25 ±0.2
1.6 ±0.2
47 nF
1.25 ±0.2
68 nF
100 nF
1.25 ±0.2
150 nF
1.25 ±0.2
220 nF
330 nF
1.6 ±0.2
470 nF
1.6 ±0.2
1.25 ±0.2
680 nF
1000 nF 1.6 ±0.2
2.2 µF
2.0 ±0.2
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
106
MLCC Selection Charts
X7R - Medium and High voltage, 1808 / 1812
X7R
Medium voltage & High voltage
1808
1812
Capacitance
1000 V
2000 V
3000 V
100 V
250 V
500 V
630 V
1000 V
2000 V
3000 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
1.6 ±0.2
2.0 ±0.2
1.35 ±0.2
1.6 ±0.2
1.6 ±0.2
1.35 ±0.2
1.6 ±0.2
1.35 ±0.2
1.35 ±0.2
1.6 ±0.2
1.6 ±0.2
2.0 ±0.2
1.25 ±0.2
0.85 ±0.1
15 nF
1.25 ±0.2
1.6 ±0.2
0.85 ±0.1
22 nF
33 nF
47 nF
68 nF
1.25 ±0.2
1.6 ±0.2
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
1.25 ±0.2
1.6 ±0.2
22 µF
47 µF
100 µF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
107
MLCC Selection Charts
X7R / X5R - Low inductance, 0306 to 0612
Features
•ꢀ Good solution for anti resonance reduction with
controlled ESR
•ꢀ Suitable for high speed IC decoupling due to low
inductance type
Temperature characteristic
Construction
15
∆C
C
(%)
10
5
0
-5
-10
-15
-55
-25
5
40
65
95
125
T ( C)
Dimensions
Discrete capacitors - Low inductance types only
Case size designation
Dimensions in mm
Inch-based
0306
Metric
0816M
1220M
1632M
L1
W
T
L2ꢀ/ꢀL3
0.10
0.13
0.13
L2ꢀ/ꢀL3
L4
min
min
max
W
0.8 ±0.15
1.25 ±0.20
1.6 ±0.20
1.6 ±0.20
2.0 ±0.20
3.2 ±0.20
0.50 ±0.10
0.85 ±0.10
0.85 ±0.10
0.30
0.46
0.46
0.20
0.38
0.50
T
0508
L2
L4
L1
L3
0612
108
MLCC Selection Charts
X7R / X5R - Low inductance, 0306 to 0612
X7R
Low Inductance series
0508
0306
10 V
0612
Capacitance
10 V
16 V
25 V
16 V
25 V
50 V
10 nF
22 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
47 nF
0.85 ±0.1
1.15 ±0.1
100 nF
0.5 ±0.1
0.85 ±0.1
220 nF
1.15 ±0.1
1.15 ±0.1
470 nF
0.85 ±0.1
1000 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
X5R
Low Inductance series
0306
Capacitance
6.3 V
10 V
16 V
100 nF
220 nF
470 nF
0.5±0.1
1000 nF
0.5±0.1
0.5±0.1
8 mm
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
109
MLCC Selection Charts
X7R - Soft termination, 0603 to 1812
Features
•ꢀ Flexible termination system
•ꢀ Improved resistance to thermal stresses
•ꢀ Increased mechanical performance
Temperature characteristic
Construction
15
∆C
C
(%)
10
Copper
5
0
Soft electrode
(Stress relaxation)
Ni Plating
Sn Plating
-5
-10
-15
-55
-25
5
40
65
95
125
T ( C)
Dimensions
Discrete capacitors - Soft termination
Case size designation
Dimensions in mm
Inch-based
Metric
1608M
2012M
3216M
3225M
4532M
L1
W
L2ꢀ/ꢀL3ꢀminꢀ
0.20
L2ꢀ/ꢀL3ꢀmaxꢀ
0.50
L4 min
0.40
0.55
1.40
1.40
2.20
0603
0805
1206
1210
1812
1.6 ±0.20
2.0 ±0.30
3.2 ±0.40
3.2 ±0.40
4.5 ±0.40
0.8 ±0.15
1.25 ±0.20
1.6 ±0.20
2.5 ±0.30
3.2 ±0.20
W
0.25
0.75
0.25
0.85
L2
L4
L1
L3
0.25
0.85
0.25
0.85
110
MLCC Selection Charts
X7R - Soft termination, 0603 / 0805
X7R
Soft termination
0603
50 V
0805
Capacitance
16 V
25 V
100 V
250 V
50 V
100 V
250 V
500 V
630 V
1000 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
0.85 ±0.15 0.85 ±0.15
0.8 ±0.15
0.85 ±0.15
0.85 ±0.15
0.6 ±0.15 0.6 ±0.15
0.8 ±0.15
0.8 ±0.15
0.8 ±0.15
6.8 nF 0.8 ±0.15
10 nF
15 nF
18 nF
1.25 ±0.2
22 nF
0.85 ±0.15 0.85 ±0.15
1.25 ±0.2 1.25 ±0.2
27 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
111
MLCC Selection Charts
X7R - Soft termination, 1206
X7R
Soft termination
1206
Capaci-
tance
1000 V
2000 V
16 V
25 V
50 V
100 V
250 V
500 V
630 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.15
0.85 ±0.15
0.85 ±0.15
0.85 ±0.15
10 nF 0.85 ±0.15
15 nF
18 nF
22 nF
1.25 ±0.2
27 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
1.25 ±0.2
1.6 ±0.2
1.15 ±0.2
1.15 ±0.2
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
1.15 ±0.2
22 µF
47 µF
100 µF
Tape
width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
112
MLCC Selection Charts
X7R - Soft termination, 1210/ 1812
X7R
Soft termination
250 V
1210
50 V
1812
Capaci-
tance
16 V
25 V
100 V
50 V
100 V
250 V
500 V
630 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
1.25 ±0.2
1.6 ±0.2
0.85 ±0.15 0.85 ±0.15 0.85 ±0.15
0.85 ±0.15 0.85 ±0.15
1.25 ±0.2
1.6 ±0.2
15 nF
0.85 ±0.15 0.85 ±0.15
18 nF
22 nF
27 nF
1.25 ±0.2
1.6 ±0.2
33 nF
47 nF
1.15 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.6 ±0.2
1.25 ±0.2
1.6 ±0.2
68 nF
100 nF
150 nF 1.15 ±0.2
220 nF
1.15 ±0.2
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape
width
12mm
Note: Values in shaded cells indicate thickness class (unit: mm)
113
MLCC Selection Charts
X5R - General purpose & High capacitance, 01005 to 1812
Features
•ꢀ Semi-stable on capacitance and high K
•ꢀ Highꢀvolumetricꢀefficiency
•ꢀ Highly reliable in high temperature application
•ꢀ High insulation resistance
Temperature characteristic
Construction
15
∆C
C
(%)
10
5
0
-5
-10
-15
-60
-35
-10
15
40
65
90
( C)
T
Case dimensions
Discrete capacitors - General purpose & High capacitance
Case size designation
Dimensions in mm
Inch-based
01005
Metric
L1
W
L2ꢀ/ꢀL3
L2ꢀ/ꢀL3
L4
min
min
max
0402M
0.4±0.02
0.2±0.02
0.07
0.14
0.14
0.6 ±0.03 (1)
0.6 ±0.05 (2)
1.0 ±0.05 (1)
1.0 ±0.20 (2)
1.6 ±0.10 (1)
1.6 ±0.20 (2)
2.0 ±0.10 (1)
2.0 ±0.20 (2)
3.2 ±0.15 (1)
3.2 ±0.30 (2)
3.2 ±0.20 (1)
3.2 ±0.40 (2)
4.5 ±0.40
0.3 ±0.03 (1)
0.3 ±0.05 (2)
0.5 ±0.05 (1)
0.5 ±0.20 (2)
0.8 ±0.10 (1)
0.8 ±0.20 (2)
1.25 ±0.10 (1)
1.25 ±0.20 (2)
1.6 ±0.15 (1)
1.6 ±0.20 (2)
2.5 ±0.20 (1)
2.5 ±0.30 (2)
2.0 ±0.30
0.10
0.10
0.15
0.15
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.20
0.20
0.30
0.30
0.60
0.60
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.20
0.20
0.40
0.40
0.40
0.40
0.55
0.55
1.40
1.40
1.40
1.40
2.20
2.20
2.20
0201
0402
0603
0805
1206
0603M
1005M
1608M
2012M
3216M
W
L2
L4
L1
L3
1210
1808
1812
3225M
4520M
4532M
4.5 ±0.20 (1)
4.5 ±0.40 (2)
3.2 ±0.20 (1)
3.2 ±0.40 (2)
Note: 1.ꢀDimensionꢀforꢀsizeꢀ0201,ꢀCꢀ<ꢀ1ꢀμF;ꢀ0402,ꢀCꢀ<ꢀ4.7ꢀμF;ꢀ0603,ꢀCꢀ<ꢀ10ꢀμF;ꢀ0805ꢀtoꢀ1812,ꢀCꢀ≤ꢀ100ꢀnF
2.ꢀDimensionꢀforꢀsizeꢀ0201,ꢀCꢀ≥ꢀ1ꢀμF;ꢀ0402,ꢀCꢀ≥ꢀ4.7ꢀμF;ꢀ0603,ꢀCꢀ≥ꢀ10ꢀμF;ꢀ0805ꢀtoꢀ1812,ꢀCꢀ>ꢀ100ꢀnF
ꢀ
114
MLCC Selection Charts
X5R - General purpose & High capacitance, 01005 to 0402
X5R
General purpose & High capacitance
01005
6.3 V
0201
16 V
0402
16 V
Capacitance
6.3 V
10 V
25 V
50 V
6.3 V
10 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
0.3 ±0.03
1.0 nF 0.2 ±0.02
1.5 nF
0.3 ±0.03
2.2 nF
0.3 ±0.03 0.3 ±0.03 0.3 ±0.03
3.3 nF
0.5 ±0.05 0.5 ±0.05
4.7 nF
0.5 ±0.05
6.8 nF
10 nF
0.5 ±0.05 0.5 ±0.05
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF 0.2 ±0.02 0.3 ±0.03 0.3 ±0.03 0.3 ±0.03 0.3 ±0.03
150 nF
220 nF
330 nF
0.3 ±0.03 0.3 ±0.03
0.5 ±0.05 0.5 ±0.05
470 nF
0.3 ±0.03
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
680 nF
1 000 nF
2.2 µF
0.3 ±0.05
0.5 ±0.05 0.5 ±0.05
0.5 ±0.15
4.7 µF
0.5 ±0.15 0.5 ±0.15
0.5 ±0.2
10ꢀμF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
115
MLCC Selection Charts
X5R - General purpose & High capacitance, 0603 / 0805
X5R
General purpose & High capacitance
0603
0805
16 V
Capacitance
6.3 V
10 V
16 V
25 V
50 V
6.3 V
10 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
15 nF 0.8 ±0.1
22 nF
0.8 ±0.1
33 nF
47 nF
68 nF
0.85 ±0.1
1.25 ±0.2
100 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
150 nF
220 nF
330 nF
470 nF
680 nF
1 000 nF
2.2 µF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
4.7 µF
0.8 ±0.15
0.8 ±0.2
0.8 ±0.15
0.8 ±0.2
10 µF 0.8 ±0.15
22 µF 0.8 ±0.2
47 µF
0.8 ±0.2
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
116
MLCC Selection Charts
X5R - General purpose & High capacitance, 1206
X5R
General purpose & High capacitance
1206
16 V
Capacitance
6.3 V
10 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1 000 nF
2.2 µF
4.7 µF
10 µF
1.15 ±0.1
1.0 ±0.1
1.15 ±0.1
1.15 ±0.1
1.6 ±0.2
1.15 ±0.1
1.6 ±0.2
1.15 ±0.1
1.6 ±0.2
1.6 ±0.3
1.6 ±0.2
1.6 ±0.3
1.6 ±0.2
1.6 ±0.3
22 µF
47 µF
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
117
MLCC Selection Charts
X5R - High capacitance, 1210 / 1812
X5R
General purpose & High capacitance
1210
16 V
1812
6.3 V
Capacitance
6.3 V
10 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
0.85 ±0.1
22 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1 000 nF
2.2 µF
4.7 µF
10 µF
1.15 ±0.1
1.25 ±0.2
1.15 ±0.1
1.25 ±0.2
1.15 ±0.1
1.25 ±0.2
1.15 ±0.1
1.25 ±0.2
1.15 ±0.1
1.25 ±0.2
1.9 ±0.2
2.5 ±0.2
1.9 ±0.2
1.9 ±0.2
1.9 ±0.2
1.9 ±0.2
2.5 ±0.3
22 µF
2.5 ±0.2
2.5 ±0.3
2.5 ±0.2
2.5 ±0.3
2.5 ±0.2
2.5 ±0.3
47 µF
2.5 ±0.2
3.2 ±0.3
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
118
MLCC Selection Charts
Y5V - General purpose & High capacitance, 0201 to 1210
Features
•ꢀ Highꢀvolumetricꢀefficiency
•ꢀ Non-polar construction
Temperature characteristic
Construction
25
∆C
C
(%)
0
-25
-50
-75
-100
-30
-5
20
55
70
(
95
T
C)
Case dimensions
Discrete capacitors - General purpose & High capacitance
Case size designation
Dimensions in mm
Inch-based
Metric
L1
W
L2ꢀ/ꢀL3
0.10
0.10
0.15
0.15
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
L2ꢀ/ꢀL3
L4
min
min
max
0.6 ±0.03
0.3 ±0.03
0.20
0.20
0.30
0.30
0.60
0.60
0.75
0.75
0.75
0.75
0.75
0.75
0.20
0.20
0.40
0.40
0.40
0.40
0.55
0.55
1.40
1.40
1.40
1.40
0201
0603M
0.6 ±0.05
0.3 ±0.05
1.0 ±0.05 (1)
1.0 ±0.20 (2)
1.6 ±0.10 (1)
1.6 ±0.15 (2)
2.0 ±0.10 (1)
2.0 ±0.20 (2)
3.2 ±0.15 (1)
3.2 ±0.30 (2)
3.2 ±0.20 (1)
3.2 ±0.40 (2)
0.5 ±0.05 (1)
0.5 ±0.20 (2)
0.8 ±0.10 (1)
0.8 ±0.15 (2)
1.25 ±0.10 (1)
1.25 ±0.20 (2)
1.6 ±0.15 (1)
1.6 ±0.20 (2)
2.5 ±0.20 (1)
2.5 ±0.30 (2)
0402
0603
0805
1206
1210
1005M
1608M
2012M
3216M
3225M
W
L2
L4
L1
L3
Note: 1.ꢀDimensionꢀforꢀsizeꢀ0402,ꢀCꢀ<ꢀ4.7ꢀμF;ꢀ0603,ꢀCꢀ<ꢀ10ꢀμF;ꢀ0805ꢀtoꢀ1210,ꢀCꢀ≤ꢀ100ꢀnF
2.ꢀDimensionꢀforꢀsizeꢀ0402,ꢀCꢀ≥ꢀ4.7ꢀμF;ꢀ0603,ꢀCꢀ≥ꢀ10ꢀμF;ꢀ0805ꢀtoꢀ1210,ꢀCꢀ>ꢀ100ꢀnF
ꢀ
119
MLCC Selection Charts
Y5V - General purpose & High capacitance 6.3 to 25V, 0201 / 0402
Y5V
General purpose & High capacitance
0201
6.3 V
0402
Capacitance
6.3 V
10 V
0.5 ±0.05
8 mm
16 V
25 V
10 nF
22 nF
0.3 ±0.03
0.5 ±0.05
47 nF
0.5 ±0.05
100 nF
0.5 ±0.05
220 nF
470 nF
1 000 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
120
MLCC Selection Charts
Y5V - General purpose & High capacitance 6.3 to 25V, 0603 / 0805
Y5V
General purpose & High capacitance
0805
0603
Capacitance
6.3 V
10 V
16 V
25 V
6.3 V
10 V
16 V
25 V
10 nF
22 nF
0.6 ±0.1
47 nF
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
100 nF
220 nF
470 nF
1 000 nF
2.2 µF
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
4.7 µF
10 µF
22 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
121
MLCC Selection Charts
Y5V - General purpose & High capacitance 6.3 to 25V, 1206 / 1210
Y5V
General purpose & High capacitance
1206
1210
Capacitance
6.3 V
10 V
16 V
25 V
6.3 V
10 V
16 V
25 V
10 nF
22 nF
47 nF
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
100 nF
220 nF
470 nF
1 000 nF
2.2 µF
0.85 ±0.1
1.6 ±0.2
0.85 ±0.1
0.85 ±0.1
1.6 ±0.2
0.85 ±0.1
1.6 ±0.2
4.7 µF
10 µF
1.15 ±0.1
1.6 ±0.2
1.5 ±0.1
1.6 ±0.2
1.5 ±0.1
1.6 ±0.2
1.5 ±0.1
1.6 ±0.2
1.5 ±0.1
22 µF
47 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
122
MLCC Selection Charts
Y5V - General purpose & High capacitance 50V, 0402 to 1206
Y5V
General purpose & High capacitance
0402
50 V
0603
50 V
0805
50 V
1206
50 V
Capacitance
10 nF
22 nF
0.5 ±0.05
0.6 ±0.1
47 nF
0.8 ±0.1
0.6 ±0.1
100 nF
220 nF
0.85 ±0.1
1.25 ±0.2
470 nF
0.85 ±0.1
1.15 ±0.1
1 000 nF
2.2 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
123
MLCC Selection Charts
NP0 / X7R - Automotive grade, 0402 to 1210
Features
•ꢀ Comply with AEC-Q200 standard
•ꢀ MSL class: MSL 1
•ꢀ J-STD-020D and TS-16949 compliant
•ꢀ Halogen free epoxy
•ꢀ RoHS compliant
Applications
•ꢀ All general purpose applications
•ꢀ Entertainment applications
•ꢀ Comfortꢀ/ꢀsecurityꢀapplications
•ꢀ Information applications
Construction
Dimensions
Discrete capacitors - Automotive grade
Case size designation
Dimensions in mm
Inch-based
Metric
1005M
1608M
2012M
3216M
3225M
L1
W
L2ꢀ/ꢀL3ꢀminꢀ
0.15
L2ꢀ/ꢀL3ꢀmaxꢀ
0.30
L4 min
0.40
0.40
0.55
1.40
1.40
0402
0603
0805
1206
1210
1.0 ±0.05
1.6 ±0.20
2.0 ±0.20
3.2 ±0.30
3.2 ±0.30
0.5 ±0.05
0.8 ±0.10
1.25 ±0.20
1.6 ±0.20
2.5 ±0.20
W
0.20
0.60
0.25
0.75
L2
L4
L1
L3
0.25
0.75
0.25
0.75
124
MLCC Selection Charts
NP0 - Automotive grade, 0402 to 0805
NP0
Automotive Grade
0402
50 V
0603
100V
0805
Capacitance
10 pF
50 V
250V
50 V
100 V
250 V
500 V
630 V
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
47 pF 0.5 ±0.05
56 pF
68 pF
82 pF
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
1.2 nF
0.6 ±0.1
0.6 ±0.1
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
Tape width
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
125
MLCC Selection Charts
NP0 - Automotive grade, 1206 / 1210
NP0
Automotive Grade
1206
1210
Capacitance
50 V
100 V
250 V
500 V
630 V
50 V
100 V
250 V
500 V
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
0.6 ±0.1
0.6 ±0.1
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
1.25 ±0.2
1.25 ±0.2
0.6 ±0.1
0.6 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
Tape width
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
126
MLCC Selection Charts
X7R - Automotive grade, 0402 / 0603
X7R
Automotive grade
0402
0603
Capacitance
10 V
16 V
25 V
50 V
10 V
16 V
25 V
50 V
100V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
0.5 ±0.05
2.2 nF
0.5 ±0.05
0.8 ±0.1
3.3 nF 0.5 ±0.05
4.7 nF
0.5 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
6.8 nF
10 nF
15 nF
18 nF
22 nF
27 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
270 nF
330 nF
390 nF
470 nF
680 nF
1000 nF
2.2ꢀμF
4.7ꢀμF
10ꢀμF
Tape width
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
127
MLCC Selection Charts
X7R - Automotive grade, 0805
X7R
Automotive grade
0805
Capacitance
10 V
16 V
25 V
50 V
100 V
250 V
500 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
15 nF
1.25 ±0.2
18 nF
22 nF
27 nF
33 nF
47 nF
1.25 ±0.2
68 nF
100 nF
150 nF
220 nF
270 nF
330 nF
390 nF
470 nF
680 nF
1000 nF
2.2ꢀμF
4.7ꢀμF
10ꢀμF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
Tape width
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
128
MLCC Selection Charts
X7R - Automotive grade, 1206
X7R
Automotive grade
1206
Capacitance
6.3 V
10 V
16 V
25V
50V
100V
250 V
500 V
630 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
15 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
18 nF
1.25 ±0.2
22 nF
27 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
270 nF
330 nF
390 nF
470 nF
680 nF
1000 nF
2.2ꢀμF
4.7ꢀμF
10ꢀμF
1.25 ±0.2
1.6 ±0.2
1.15 ±0.2
1.6 ±0.2
1.15 ±0.2
1.15 ±0.2
1.15 ±0.2
1.15 ±0.2
Tape width
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
129
MLCC Selection Charts
X7R - Automotive grade, 1210
X7R
Automotive grade
1210
Capacitance
6.3 V
10 V
16 V
25V
50V
100V
250 V
500 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
1.25 ±0.2
0.85 ±0.1
15 nF
18 nF
0.85 ±0.1
0.85 ±0.1
22 nF
27 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
33 nF
1.25 ±0.2
47 nF
68 nF
100 nF
150 nF
220 nF
270 nF
330 nF
390 nF
470 nF
680 nF
1000 nF
2.2ꢀμF
4.7ꢀμF
10ꢀμF
1.25 ±0.2
1.15 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
Tape width
12mm
Note: Values in shaded cells indicate thickness class (unit: mm)
130
MLCC Selection Charts
NP0 / X7R - High voltage SC type, 1808 / 1812
Features
•ꢀ Capable of operating at high voltage levels
•ꢀ For high frequency snubber
•ꢀ Decoupling/ꢀSmoothingꢀfunction
•ꢀ TUVꢀcertificateꢀNo.:ꢀ50031668
•ꢀ ULꢀcertificateꢀNo.:ꢀE238900
Temperature characteristic
NP0
15
X7R
∆C
C
40
(%)
10
5
TC
- 6
(x10 /K)
20
0
0
-5
-20
-10
-15
-40
-55
-25
5
40
65
95
125
-40
0
40
80
120
T ( C)
T ( C)
Construction
Dimensions
Discrete capacitors - High voltage SC type
Case size designation
Dimensions in mm
Inch-based
1808
Metric
L1
W
L2ꢀ/ꢀL3
L2ꢀ/ꢀL3
min
max
W
4520M
4.8 ±0.30
4.8 ±0.30
2.0 ±0.30
3.2 ±0.30
0.25
0.75
0.75
L2
L4
L1
L3
1812
4532M
0.25
131
MLCC Selection Charts
NP0 - High voltage SC type, 1808 / 1812
NP0
X7R
1808
1808
1812
1808
1812
Capacitance
Capacitance
X1/Y2ꢀ
for TUV
X1/Y2
for UL
X2/Y3ꢀ
forꢀTUV/UL forꢀTUV/UL
X2/Y3ꢀ
X1/Y2ꢀ
forꢀTUV/UL forꢀTUV/UL
X2/Y3ꢀ
X1/Y2ꢀ
for TUV
X1 for UL
2 pF
3.3 pF
4.7 pF
5 pF
150 pF
180 pF
220 pF
240 pF
270 pF
330 pF
390 pF
430 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
1.2 nF
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
10 pF
1.6 ±0.2
12 pF
15 pF
18 pF
1.6 ±0.2
1.6 ±0.2
2.0 ±0.2
22 pF
27 pF
1.6 ±0.2
1.6 ±0.2
33 pF
2.0 ±0.2
2.0 ±0.2
39 pF
47 pF
2.0 ±0.2
56 pF
68 pF
1.5 nF
82 pF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
100 pF
120 pF
150 pF
180 pF
220 pF
240 pF
270 pF
330 pF
390 pF
430 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
Tape width
2.0 ±0.2
2.0 ±0.2
2.0 ±0.2
2.0 ±0.2
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
132
MLCC Selection Charts
NP0 / X7R / Y5V - 4C Arrays, 0508 / 0612
Features
•ꢀ Less than 50% board space of an equivalent discrete
component
•ꢀ Highꢀvolumetricꢀefficiency
•ꢀ Increased throughput, by time saved in mounting
Temperature characteristic
NP0
15
X7R
∆C
C
40
%)
10
TC
- 6
(x10 /K)
20
0
5
0
-5
-20
-10
-15
-40
-55
-25
5
40
65
95
125
-40
0
40
80
120
T ( C)
T ( C)
Temperature characteristic
Construction
Y5V
25
∆C
C
(%)
0
-25
-50
-75
-100
-30
-5
20
55
70
95
T
( C)
133
MLCC Selection Charts
NP0 / X7R / Y5V - 4C Arrays, 0508 / 0612
Dimensions
4C arrays
Case size designation
Dimensions in mm
Tmin Tmax
B
Inch-based
Metric
L
W
A
B
P
W
T
0508
1220M
L
2.0 ±0.15 1.25 ±0.15 0.50
0.70 0.28 ±0.10 0.2 ±0.10 0.5 ±0.10
(4 x 0402)
(4 x 1005)
A
P
0.70(1) 0.90(1)
0.50(2) 0.70(2)
0612
1632M
3.2 ±0.15 1.60 ±0.15
0.4 ±0.10
0.3 ±0.20 0.8 ±0.10
(4 x 0603)
(4 x 1608)
Note: 1. Available for NP0 and X7R
2. Available for Y5V
134
MLCC Selection Charts
NP0 - 4C Arrays, 0508 / 0612
NP0
4C arrays
0508
0612
Capacitance
50 V
100 V
50 V
100 V
10 pF
15 pF
18 pF
22 pF
0.6 ±0.1
27 pF
0.6 ±0.1
47 pF
100 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
Tape width
0.8 ±0.1
0.8 ±0.1
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
135
MLCC Selection Charts
X7R - 4C Arrays, 0508 / 0612
X7R
4C arrays
0508
25 V
0612
25 V
Capacitance
16 V
50 V
16 V
50 V
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
0.6 ±0.1
0.6 ±0.1
0.8 ±0.1
0.8 ±0.1
0.6 ±0.1
12 nF
15 nF
18 nF
22 nF
27 nF
0.8 ±0.1
33 nF
47 nF
56 nF
68 nF
82 nF
100 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
136
MLCC Selection Charts
Y5V - 4C Arrays, 0612
Y5V
4C arrays
0612
Capacitance
25 V
10 nF
22 nF
0.6 ±0.1
8 mm
47 nF
100 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
137
MLCC Engineering Design Kits
Sample kits for 0201 / 0402
0201 sample kits
NP0 50 V
NP0 25 V
Capacitance (pF)
X7R 50 V
Capacitance (pF)
Capacitance (pF)
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±0.50 pF
±0.50 pF
±5%
Tolerance
±5%
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
27
33
47
68
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
±5%
39
±5%
100
150
220
330
470
47
±5%
56
±5%
68
±5%
82
±5%
100
±5%
X7R 25 V
Y5V 6.3V
Capacitance (pF)
Tolerance
±10%
Capacitance (pF)
100 000
Tolerance
680
-20%ꢀtoꢀ+80%
1 000
±10%
X5R 6.3V
X7R 16V
Capacitance (pF)
100 000
Tolerance
±10%
Capacitance (pF)
1 500
Tolerance
±10%
12
±5%
15
±5%
2 200
±10%
18
±5%
3 300
±10%
22
±5%
X7R 10 V
Capacitance (pF)
10 000
Tolerance
±10%
Note: 100 pieces per value. Ordering code CC020100000000000 for Yageo brand product
0402 sample kits
NP0 50 V
Capacitance (pF)
Y5V 16 V
X7R 50 V
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
Capacitance (pF)
10 000
Tolerance
±20%
Capacitance (pF)
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
100
150
1.5
2.2
3.3
4.7
6.8
22 000
±20%
47 000
±20%
220
100 000
±20%
330
X5R 25V
470
Capacitance (pF)
100 000
Tolerance
±10%
680
10
1 000
1 500
2 200
3 300
15
22
±5%
±5%
33
±5%
47
±5%
X7R 25 V
68
±5%
Capacitance (pF)
4 700
Tolerance
±10%
100
150
220
±5%
±5%
100 000
±10%
±5%
X7R 16 V
Capacitance (pF)
6 800
Tolerance
±10%
10 000
±10%
15 000
±10%
22 000
±10%
Note: 95 pieces per value. Ordering code CC040200000000000 for Yageo brand product
138
MLCC Engineering Design Kits
Sample kits for 0603 / 0805
0603 sample kits
NP0 50 V
NP0 25 V
X7R 50 V
Capacitance (pF)
Capacitance (pF)
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
Capacitance (pF)
1 000
Tolerance
±5%
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
1.5
2.2
3.3
4.7
6.8
10
100
150
1 500
±5%
Y5V 50 V
220
Capacitance (pF)
10 000
Tolerance
±20%
330
470
22 000
±20%
680
47 000
±20%
1 000
1 500
2 200
3 300
4 700
6 800
10 000
15
±5%
100 000
±20%
22
±5%
Y5V 16 V
33
±5%
Capacitance (pF)
220 000
Tolerance
±20%
47
±5%
68
±5%
470 000
±20%
100
150
220
330
470
680
±5%
±5%
X7R 25 V
±5%
Capacitance (pF)
15 000
Tolerance
±10%
±5%
±5%
22 000
±10%
±5%
X7R 16 V
Capacitance (pF)
33 000
Tolerance
±10%
47 000
±10%
68 000
±10%
100 000
±10%
Note: 48 pieces per value. Ordering code CC060300000000000 for Yageo brand product
0805 sample kits
NP0 50 V
Capacitance (pF)
NP0 25 V
X7R 50 V
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
Capacitance (pF)
3 300
Tolerance
±5%
Capacitance (pF)
220
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
1.5
2.2
3.3
4.7
6.8
4 700
±5%
330
Y5V 50 V
470
Capacitance (pF)
10 000
Tolerance
±20%
680
1 000
22 000
±20%
1 500
10
47 000
±20%
2 200
15
22
±5%
100 000
±20%
3 300
±5%
220 000
±20%
4 700
33
±5%
Y5V 16 V
6 800
47
±5%
Capacitance (pF)
470 000
Tolerance
±20%
10 000
15 000
22 000
33 000
47 000
68 000
100 000
68
±5%
100
150
220
330
470
680
1 000
1 500
2 200
±5%
1 000 000
±20%
±5%
±5%
±5%
±5%
±5%
X7R 16 V
±5%
Capacitance (pF)
150 000
Tolerance
±10%
±5%
±5%
220 000
±10%
330 000
±10%
470 000
±10%
Note: 48 pieces per value. Ordering code CC080500000000000 for Yageo brand product
139
MLCC Engineering Design Kits
Sample kits for 1206
1206 sample kits
NP0 50 V
NP0 25 V
Capacitance (pF)
10 000
X7R 50 V
Capacitance (pF)
Capacitance (pF)
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
Tolerance
±5%
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
1
1.5
220
330
Y5V 50 V
2.2
Capacitance (pF)
100 000
Tolerance
±20%
470
3.3
680
4.7
220 000
±20%
1 000
6.8
470 000
±20%
1 500
10
1 000 000
±20%
2 200
15
±5%
3 300
22
±5%
4 700
33
±5%
6 800
47
±5%
10 000
15 000
22 000
33 000
47 000
68 000
100 000
150 000
220 000
68
±5%
100
150
220
330
470
680
1 000
1 500
2 200
3 300
4 700
6 800
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
X7R 16 V
±5%
Capacitance (pF)
330 000
Tolerance
±10%
±5%
±5%
470 000
±10%
±5%
680 000
±10%
1 000 000
±10%
Note: 48 pieces per value. Ordering code CC120600000000000 for Yageo brand product
140
MLCC Engineering Design Kits
Sample kits for high capacitance series
High capacitance sample kits
X5R 0402
X7R 0603
Capacitance Rated voltage
Y5V 0402
Capacitance Rated voltage
Tolerance
±10%
Tolerance
±10%
Capacitance Rated voltage
Tolerance
1 µF
1 µF
6.3 V
10 V
1 µF
16 V
1 µF
1 µF
6.3 V
10 V
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
±10%
X7R 0805
2.2 µF
6.3 V
±20%
Capacitance Rated voltage
Tolerance
±10%
Y5V 0603
X5R 0603
1 µF
25 V
16 V
Capacitance Rated voltage
Tolerance
Capacitance Rated voltage
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±20%
2.2 µF
2.2 µF
±10%
1 µF
1 µF
10 V
16 V
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
1 µF
1 µF
16 V
25 V
25 V
±10%
X7R 1206
2.2 µF
2.2 µF
4.7 µF
10 V
2.2 µF
2.2 µF
2.2 µF
4.7 µF
4.7 µF
10 µF
6.3 V
10 V
Capacitance Rated voltage
Tolerance
±10%
16 V
1 µF
2.2 µF
4.7 µF
10 µF
25 V
25 V
25 V
16 V
6.3 V
16 V
±10%
Y5V 0805
6.3 V
10 V
±10%
Capacitance Rated voltage
Tolerance
±10%
1 µF
1 µF
16 V
25 V
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
6.3 V
X5R 0805
1 µF
50 V
Capacitance Rated voltage
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±20%
2.2 µF
4.7 µF
10 µF
16 V
2.2 µF
4.7 µF
4.7 µF
4.7 µF
10 µF
10 µF
10 µF
22 µF
25 V
6.3 V
10 V
10 V
10 V
Y5V 1206
16 V
Capacitance Rated voltage
Tolerance
6.3 V
10 V
4.7 µF
10 µF
10 µF
22 µF
16 V
10 V
16 V
16 V
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
-20%ꢀtoꢀ+80%
16 V
6.3 V
X5R 1206
Capacitance Rated voltage
Tolerance
±10%
4.7 µF
4.7 µF
10 µF
10 µF
22 µF
16 V
25 V
16 V
25 V
6.3 V
±10%
±10%
±10%
±20%
Note: 50 pieces per value. Ordering code CC888800000000000 for Yageo brand product
High capacitance sample kits for smart phone
X5R 0201
X5R 0603
X5R 0805
Capacitance Rated voltage
Tolerance
±10%
Capacitance Rated voltage
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±20%
±20%
Capacitance Rated voltage
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±20%
±20%
100 nF
100 nF
220 nF
470 nF
1ꢀμF
6.3 V
10 V
1ꢀμF
1ꢀμF
16 V
25 V
10 V
16 V
6.3 V
10 V
6.3 V
6.3 V
2.2ꢀμF
2.2ꢀμF
4.7ꢀμF
4.7ꢀμF
4.7ꢀμF
4.7ꢀμF
10ꢀμF
10ꢀμF
10ꢀμF
22ꢀμF
47ꢀμF
16 V
25 V
±10%
6.3 V
±20%
2.2ꢀμF
2.2ꢀμF
4.7ꢀμF
4.7ꢀμF
10ꢀμF
22ꢀμF
6.3 V
10 V
6.3 V
±20%
6.3 V
±20%
16 V
X5R 0402
25 V
Capacitance Rated voltage
Tolerance
±10%
6.3 V
10 V
1ꢀμF
1ꢀμF
6.3 V
10 V
16 V
6.3 V
6.3 V
6.3 V
±10%
16 V
1ꢀμF
±10%
6.3 V
6.3 V
X5R 1206
2.2ꢀμF
4.7ꢀμF
10ꢀμF
±20%
±20%
±20%
Capacitance Rated voltage
Tolerance
±10%
10ꢀμF
10ꢀμF
22ꢀμF
47ꢀμF
16 V
25 V
6.3 V
6.3 V
±10%
±10%
±20%
Note: 50 pieces per value. Ordering code SP888800000000000 for Yageo brand product
141
MLCC Engineering Design Kits
High voltage sample kits for general applications
High voltage sample kits for general applications
NP0 1206
Rated voltage
1 kV
X7R 1206
Rated voltage
1 kV
Capacitance
10 pF
Tolerance
±5%
Capacitance
10 nF
Tolerance
±10%
100 pF
1 nF
1 kV
±5%
1 nF
2 kV
±10%
1 kV
±5%
1 nF
1 kV
±10%
10 pF
2 kV
±5%
X7R 1210
Rated voltage
1 kV
100 pF
2 kV
±5%
Capacitance
1 nF
Tolerance
±10%
NP0 1210
Rated voltage
1 kV
Capacitance
10 pF
Tolerance
±5%
10 nF
1 kV
±10%
1 nF
2 kV
±10%
100 pF
1 nF
1 kV
±5%
X7R 1808
Rated voltage
1 kV
1 kV
±5%
Capacitance
10 nF
Tolerance
±10%
10 pF
2 kV
±5%
100 pF
2 kV
±5%
1 nF
3 kV
±10%
NP0 1808
Rated voltage
1 kV
1 nF
1 kV
±10%
Capacitance
10 pF
Tolerance
±5%
1 nF
2 kV
±10%
X7R 1812
Rated voltage
2 kV
100 pF
1 nF
1 kV
±5%
Capacitance
10 nF
Tolerance
±10%
1 kV
±5%
10 pF
3 kV
±5%
1 nF
1 kV
±10%
100 pF
10 pF
3 kV
±5%
10 nF
1 kV
±10%
2 kV
±5%
100 pF
2 kV
±5%
NP0 1812
Rated voltage
2 kV
Capacitance
10 pF
Tolerance
±5%
100 pF
1 nF
2 kV
±5%
2 kV
±5%
10 pF
1 kV
±5%
100 pF
1 nF
1 kV
±5%
1 kV
±5%
10 pF
3 kV
±5%
100 pF
3 kV
±5%
Note: 50 pieces per value. Ordering code HV777700000000000 for Yageo brand product
142
MLCC Engineering Design Kits
Sample kits for high frequency series
High frequency sample kits
NP0 0201
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
1.6pF
1.8pF
2.0pF
2.2pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
5.0pF
5.6pF
6.0pF
6.2pF
6.8pF
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±5%
Note: 10 pieces per value. Ordering code CQ0201000000SB000 for Yageo brand product
High frequency sample kits
NP0 0402
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
1.6pF
1.8pF
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
2.0pF
2.2pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.6pF
6.0pF
6.2pF
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
6.8pF
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: 10 pieces per value. Ordering code CQ0402000000SB000 for Yageo brand product
143
MLCC Engineering Design Kits
Sample kits for high frequency series
High frequency sample kits
NP0 0603
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
1.6pF
1.8pF
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
2.0pF
2.2pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.6pF
6.0pF
6.2pF
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
6.8pF
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
47pF
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: 10 pieces per value. Ordering code CQ0603000000SB000 for Yageo brand product
High frequency sample kits
NP0 0805
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
Capacitance Rated voltage Tolerance
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
1.6pF
1.8pF
2.0pF
2.2pF
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.6pF
6.0pF
6.2pF
6.8pF
7.0pF
7.5pF
8.0pF
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
8.2pF
9.0pF
9.1pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
47pF
56pF
68pF
82pF
100pF
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
±0.25pF
±0.25pF
±0.25pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: 10 pieces per value. Ordering code CQ0805000000SB000 for Yageo brand product
144
SMD CERAMIC EMI FILTER CAPACITORS
X2Y® PRODUCTS
X2Y® Product Selection Charts
SMD ceramic EMI filter capacitors X2Y® series
Features
•ꢀ Broadband Filtering and Decoupling: X2Y® is effective up to 10
GHz and frequencies beyond
•ꢀ Ultra Low ESL: Noise cancellation within X2Y® makes ESL
reducing from nanohenry to picohenry levels
•ꢀ Bypass: Unlike feedthrough capacitors, X2Y® is in bypass, so no
DC current limitations
•ꢀ Matched Y-caps: Two tightly matched line to ground capacitors in
one device
•ꢀ Superior Balance: Temperature and voltage variations balanced of
two Y-caps
•ꢀ Aging Reliability: Aging effects are equal on two Y-caps
Circuit of typical applications
SCM049_V
A
A
B
A
G
2
G
G
G
G
1
2
1
2
B
B
G
1
Decoupling application
EMI filtering application
Benefits
Applications
•ꢀ Fewer Components in Filtering: One X2Y® can replace multiple
•ꢀ EMIꢀfilteringꢀonꢀDCꢀmotors
•ꢀ Filtered connectors (airbag connectors, RJ-45 connectors)
•ꢀ Highꢀspeedꢀdata-lineꢀfiltering
•ꢀ Decoupling of supply-lines in high speed digital circuits
•ꢀ Broadbandꢀfiltering
inductorsꢀand/orꢀcapacitors
•ꢀ Superior Performance in Filtering: One X2Y® can eliminate both
differential and common mode noises
•ꢀ Fewer Components in Decoupling: Up to 1:7 replacement of MLCC
in power delivering system bypass networks
•ꢀ Superior Performance in Decoupling: Large or small, X2Y®
•ꢀ AmplifierꢀdecouplingꢀandꢀEMIꢀsuppression
•ꢀ IC Decoupling, on-package, on-PCB
•ꢀ DCꢀpowerꢀlineꢀfiltering
components exhibit ultra low ESL
•ꢀ Total Cost Savings: Assembly cost savings through reduced
component count and placement costs
•ꢀ Dataꢀlineꢀfiltering
•ꢀ EMI suppression for DC motors
•ꢀ Sensors
•ꢀ Board Level Design Advantages: Dramatically reduces via drills,
which blocks routing
•ꢀ Audio
146
X2Y® Product Selection Charts
Ordering information
X7R
Y-Capacitor
TOLERANCE
Voltage rating
Thickness
(mm)
Size
Global part number
Capacitance
(nF)
(V)
( %)
1
1
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
100
16
CX 0603 MR X7R 0BB 102
CX 0603 MR X7R 7BB 102
CX 0603 MR X7R 0BB 152
CX 0603 MR X7R 9BB 152
CX 0603 MR X7R 0BB 222
CX 0603 MR X7R 0BB 472
CX 0603 MR X7R 0BB 562
CX 0603 MR X7R 9BB 562
CX 0603 MR X7R 9BB 103
CX 0603 MR X7R 8BB 223
CX 0603 MR X7R 7BB 473
CX 0603 MR X7R 7BB 563
CX 0603 MR X7R 6BB 104
CX 0603 MR X7R 6BB 224
CX 0805 MR X7R 0BB 102
CX 0805 MR X7R 0BB 472
CX 0805 MR X7R 0BB 103
CX 0805 MR X7R 9BB 153
CX 0805 MR X7R 9BB 183
CX 0805 MR X7R 9BB 223
CX 0805 MR X7R 8BB 223
CX 0805 MR X7R 8BB 393
CX 0805 MR X7R 7BB 473
CX 0805 MR X7R 7BB 104
CX 0805 MR X7R 6BB 184
CX 1206 MK X7R 0BB 153
CX 1206 MK X7R 0BB 223
CX 1206 MK X7R 9BB 473
CX 1206 MK X7R 9BB 104
CX 1206 MK X7R 7BB 224
CX 1206 MK X7R 7BB 394
CX 1206 MK X7R 6BB 474
CX 1210 MK X7R 9BB 104
CX 1210 MK X7R 9BB 224
CX 1210 MK X7R 9BB 394
CX 1210 MK X7R 8BB 474
CX 1210 MK X7R 8BB 564
CX 1210 MK X7R 7BB 824
CX 1210 MK X7R 7BB 105
CX 1410 MK X7R 9BB 394
1.5
1.5
2.2
4.7
5.6
5.6
10
100
50
100
100
100
50ꢀ/ꢀ63
50ꢀ/ꢀ63
25
0603
0.65
22
47
16
56
16
100
220
1
10
10
100
100
100
50ꢀ/ꢀ63
50ꢀ/ꢀ63
50ꢀ/ꢀ63
25
4.7
10
15
18
0805
22
0.85
22
39
25
47
16
100
180
15
16
10
100
100
50ꢀ/ꢀ63
50ꢀ/ꢀ63
16
22
47
100
220
390
470
100
220
390
470
560
820
1000
390
1.20
1206
16
10
50
50
50
1210
1410
1.60
1.30
25
25
16
16
50
X5R
Y-Capacitor
Voltage rating
(V)
Thickness
(mm)
Size
Global part number
Capacitance
(nF)
TOLERANCE
( %)
220
330
470
470
20%
20%
20%
20%
10
10
10
6.3
CX 0603 MR X5R 6BB 224
CX 0603 MR X5R 6BB 334
CX 0603 MR X5R 6BB 474
CX 0603 MR X5R 5BB 474
0603
0.65
Note: 1. Special values are available on request
147
X2Y® Product Selection Charts
Ordering information
NP0
Y-Capacitor
Voltage rating
(V)
Thickness
(mm)
Size
0603
0805
Global part number
Capacitance
(nF)
TOLERANCE
( %)
0.01
0.022
0.033
0.047
0.1
100
100
100
100
50
CX 0603 MR NPO 0BB 100
CX 0603 MR NPO 0BB 220
CX 0603 MR NPO 0BB 330
CX 0603 MR NPO 0BB 470
CX 0603 MR NPO 9BB 101
CX 0603 MR NPO 9BB 221
CX 0603 MR NPO 9BB 471
CX 0805 MR NPO 9BB 100
CX 0805 MR NPO 9BB 220
CX 0805 MR NPO 9BB 470
20%
0.85
0.22
50
0.47
50
0.01
50
0.022
0.047
50
50
Note: 1. Special values are available on request
Thickness classes and packing quantities
Quantity per reel
8 mm tape width
Ø180mmꢀ/ꢀ7”
0603 - 1410
Thickness
Classification
(mm)
Blister
---
Paper
4 000
4 000
---
0.60 ±0.10
0.85 ±0.10
---
3 000
2 000
2 000
1.20 ±0.15
1.60 ±0.15
---
1.90 ±0.20
---
Note: 1. Special values are available on request
148
X2Y® Product Selection Charts
Ordering information
Global part number
Ordering example: CX0603MKX7R6BB104
C X 0 6 0 3 M K X 7 R
6 B B 1 0 4
Series name (code 1-2)
CX = X2Y ®-series
Capacitance value (code 15-17)
104 = 100 000 pF
(2ꢀsignificantꢀdigits+numberꢀofꢀzeros;ꢀ
Size code (code 3-6)
theꢀ3rdꢀdigitꢀsignifiesꢀtheꢀmultiplyingꢀ
EIA
mm
factor, and letter R is decimal point)
0603 (1608M)
0805 (2012M)
1206 (3216M)
1210 (3225M)
1410 (3625M)
0 = x 1
1 = x 10 1
2 = x 10 2
3 = x 10 3
4 = x 10 4
5 = x 10 5
6 = x 10 6
Capacitance tolerance (code 7)
M = ±20%
Process code (code 14)
B = BME
Packing style (code 8)
Rꢀ=ꢀPaperꢀtapeꢀreelꢀØ7"
Kꢀ=ꢀEmbossedꢀplasticꢀtapeꢀreelꢀØ7"
Termination (code 13)
B = Ni-barrier
TC material (code 9-11)
NP0
X7R
X5R
Rated voltage (code 12)
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
0 = 100 V
149
WIRELESS COMPONENTS
Wireless Components Product Selection Charts
Introduction
Introduction
Yageoꢀproducesꢀaꢀcomprehensiveꢀrangeꢀofꢀwirelessꢀcomponents,ꢀincldingꢀmetal/PCB/FPCBꢀantenna,ꢀpatchꢀantennaꢀ
(ceramicꢀbulk),ꢀactiveꢀantennaꢀ(LNAꢀcircuit),ꢀchipꢀantenna,ꢀandꢀRFꢀcomponentsꢀ(filter/balancer).ꢀ
Ourꢀproductsꢀcoverꢀaꢀwideꢀvarietyꢀofꢀwirelessꢀcommunicationꢀprotocols,ꢀincludingꢀBluetoothꢀ&ꢀIEEEꢀ802.11b/g,ꢀWPAN
(Wireless Personal Area Network), WLAN (Wireless Local Area Network), WMAN (Wireless Metropolitan Area
Network), WWAN (Wireless Wide Area Network) and LTE (Long Term Evolution).
Wireless Components
Antenna
Metal
PCB
FPCB
LTCC /ꢀCeramic
Patch /ꢀCeramic
LTCCꢀBalun/ꢀFilter/ꢀBalunꢀ+ꢀFilterꢀ(Combo)ꢀ/ꢀX2Y
Balun
Filter
Balunꢀ+ꢀFilter
X2Y Filter
FEM Substrate
Yageo Antenna Portfolio
CellularWWAN
(GSM/CDMA/UMTS/LTE)
Frequency
1710 - 2170 MHz
700/824 MHz 960MHz
1 GHz = 1,000 MHz
4.9/5.15-5.875 GHz
169 MHz 315 & 433 MHz
868 & 915 MHz 1575 & 1602 MHz
2.4 - 2.5 GHz
Short-Range
(UHF/Sub-GHz)
GPS & Glonass
2.4 & 5 GHz
(BT/WiFi/ZigBee)
152
Wireless Components Selection Charts
Introduction
Portableꢀdevices,ꢀhomeꢀappliances,ꢀindustrial/medicalꢀequipmentꢀwillꢀbeꢀequippedꢀwithꢀwirelessꢀconnectivityꢀforꢀPeer-to-Peerꢀdataꢀ
exchange. More wireless components are needed.
Surveillance
Mobile
Smart Energy
Medical
PC
Automotive
Key features of wireless components
Compact
• Maximize performance with the smallest size required
• Theꢀsmallestꢀ2.4/5ꢀGHzꢀantenna:ꢀPCBꢀ18.4x7.5ꢀmmꢀ/ꢀLTCCꢀ2x1.25ꢀmm
Multi-Band & High Efficiency
• WWAN:ꢀQuad-bandꢀ(850/900/1800/1900ꢀMHz)ꢀtoꢀPenta-bandꢀ(850/900/1800/1900/2100ꢀMHz)
• Supportꢀ4GꢀcellularꢀnetworkꢀLTEꢀ700ꢀMHzꢀ(Bandꢀ12,13,17),ꢀ2300/2600ꢀMHzꢀ
• Multi-bandꢀ2.3/2.4/2.7ꢀ&ꢀ5ꢀGHzꢀsupportingꢀWLAN/WiMAX/LTE
• Operating in dual navigational systems GPS & Glonass: 1575 – 1602 MHz
High Reliability
• Operating temperature range: -40°C ~ 105°C
• Operating humidity 95% RH at 40°C
• Vibrationꢀverification
Easy Installation
• Reliableꢀadhesiveꢀtape,ꢀsurfaceꢀmount,ꢀandꢀflexibleꢀcable/connectorꢀselection
153
Wireless Components Selection Charts
Antenna - 2.4 GHz
2.4 GHz
Part No./ Description
ANT1204F001R2400A /
Electrical Data
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Mechanical Data
Model
Size (mm) : 12*4*2.0
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
CAN4311059012451K
Polarization: Linear
1204 2.4GHz PIFA Chip Antenna
Peak Gain : 6.66 dBi(Typ.)
ANT1004F002R2400A /
CAN4311041022451K
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Size (mm) : 10*4*2.0
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
1004 2.4GHz PIFA Chip Antenna
Peak Gain : 1.55 dBi(Typ.)
ANT9520LL06R2400A /
CAN4311795062452K
Freq. Range: 2400~2500 MHz
VSWR*: 2.5 (Max)
Size (mm) : 9.5*2.0*1.2
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
9520 2.4GHz Chip Antenna
Peak Gain : 2.85 dBi(Typ.)
ANT8010LL04R2400A /
CAN4311781042453K
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Size (mm) : 8.0*1.0*1.0
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
8010 2.4GHz Chip Antenna
Peak Gain : 5.88 dBi(Typ.)
ANT7836A003R2400A /
CAN4311278032451K
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Size (mm) : 7.8*3.6*0.5
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
7836 2.4GHz Chip Antenna
Peak Gain : 3.93 dBi dBi(Typ.)
ANT7020LL05R2400A /
CAN4311772052452K
Freq. Range: 2400~2500 MHz
VSWR*: 2.8 (Max)
Size (mm) : 7.0*2.0*0.8
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
7020 2.4GHz Chip Antenna
Peak Gain : 2.62 dBi dBi(Typ.)
ANT5320LL45R2400A /
CAN4311753452451K
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Size (mm) : 5.3*2.0*1.2
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
5320 2.4GHz Chip Antenna
Peak Gain : 5.5 dBi dBi(Typ.)
ANT5320LL24R2400A /
CAN4311753242452K
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Size (mm) : 5.3*2.0*1.25
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
5320 2.4GHz PIFA Chip Antenna
Peak Gain : 2.78 dBi(Typ.)
ANT5010LL04R2400A /
CAN4311751042453K
Freq. Range: 2400~2500 MHz
VSWR*: 2.8 (Max)
Size (mm) : 5.0*1.0*1.0
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
5010 2.4GHz Chip Antenna
Peak Gain : 2.28 dBi(Typ.)
ANT3216LL00R2400A /
CAN4311712002453K
Freq. Range: 2400~2500 MHz
VSWR*: 2.5 (Max)
Size (mm) : 3.2*1.6*1.3
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
3216 2.4Ghz Chip Antenna
Peak Gain : 5 dBi(Typ.)
ANT3216A063R2400A /
CAN4311212632453K
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Size (mm) : 3.2*1.6*0.5
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
3216 2.4GHz PIFA Chip Antenna
Peak Gain : 1.69 dBi(Typ.)
ANT3012LL04R2400A /
CAN4311792042453K
Freq. Range: 2400~2500 MHz
VSWR*: 2.0 (Max)
Size (mm) : 3.0*1.2*1.2
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
Peak Gain : 1.84 dBi(Typ.)
3012 2.4GHz Chip Antenna
* VSWR depends on the environment
154
Wireless Components Selection Charts
Antenna - 2.4/ 5 GHz
2.4 GHz
Model
Part No./ Description
ANT2012LL13R2400A /
CAN4311714132454K
Electrical Data
Freq. Range : 2400~2500 MHz
VSWR*: 2.0 (Max)
Mechanical Data
Size (mm) : 2.0*1.2*1.0
OperatingTemp.: -40 ~ 105°C
2012 2.4GHz PIFA Chip Antenna Polarization: Linear
Peak Gain : 2.72 dBi(Typ.)
RoHS Compliance
ANTX200P001B24003
2.4GHz PCB Antenna - mini
Freq. Range : 2400 MHz
VSWR*: 2.5 (Max)
Size (mm) : 18.4*7.5*0.55
OperatingTemp.: -40 ~ 80°C
Polarization: Linear
Peak Gain : 4.8 dBi(Typ.)
RoHS Compliance
2.4 GHz / GPS
Model
Part No./ Description
ANT1003LL15R1524A /
CAN4311756151521K
Electrical Data
Freq. Range : 1575 / 2400 MHz
VSWR*: 2.8 (Max)
Mechanical Data
Size (mm) : 10*3*1.5
OperatingTemp.: -40 ~ 105°C
1003 2.4GHz+GPS PIFA Chip
Antenna
Polarization: Linear
Peak Gain : 1.15 dBi / 2.90 dBi(Typ.)
RoHS Compliance
ANT5320LL07R1524A /
CAN4311753071522K
Freq. Range : 1575 / 2400 MHz
VSWR*: 2.0 (Max)
Size (mm) : 5.3*2.0*1.2
OperatingTemp.: -40 ~ 105°C
5320 2.4GHz+GPS PIFA Chip
Antenna
Polarization: Linear
Peak Gain : 2.47 dBi / 2.04 dBi(Typ.)
RoHS Compliance
2.4 / 5 GHz
Model
Part No./ Description
ANT1003LL05R2455A /
CAN4311756052521K
Electrical Data
Freq. Range :
2400~2500/ 5150~5875 MHz
VSWR*: 2.8 (Max)
Mechanical Data
Size (mm) : 10*3*1.6
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
1003 2.4+5GHz Chip Antenna
Polarization: Linear
Peak Gain : 2.5 dBi / 2.48dBi(Typ.)
ANT5320LL04R2455A /
CAN4311753042522K
5320 2.4+5GHz Chip Antenna
Freq. Range :
2400~2500/ 5150~5875 MHz
VSWR*: 2.8 (Max)
Size (mm) : 5.3*2.0*1.4
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
Peak Gain : 2.72 dBi / 3.85dBi(Typ.)
ANT5320LL24R2455A /
CAN4311753242522K
5320 2.4+5GHz PIFA Chip
Freq. Range : 2400~2500/
5150~5875 MHz
VSWR*: 2.8 (Max)
Size (mm) : 5.3*2.0*1.2
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Antenna
Polarization: Linear
Peak Gain : 2.17 dBi / 3.51dBi(Typ.)
ANTX100P001B24553
2.4+5GHz PCB Antenna
Freq. Range :
2400~2500/ 5150~5875 MHz
VSWR*: 2.5 (Max)
Size (mm) : 50*10*0.9
OperatingTemp.: -40 ~ 80°C
RoHS Compliance
Polarization: Linear
Peak Gain : 5.1dBi(Typ.)
5 GHz
Model
Part No./ Description
ANT3216LL05R5000A /
Electrical Data
Freq. Range : 5150~5875 MHz
Mechanical Data
Size (mm) : 3.2*1.6*1.3
VSWR*: 2.0 (Max)
CAN4311712055003K
OperatingTemp.: -40 ~ 105°C
3216 5GHz Chip Antenna
Polarization: Linear
Peak Gain : 5.71 dBi(Typ.)
RoHS Compliance
* VSWR depends on the environment
155
Wireless Components Product Selection Charts
Antenna - Cellular WWAN / Short Range
CellularWWAN
Model
Part No./ Description
ANT2112A010B0918A /
Electrical Data
Freq. Range :
824~960 / 1710~1990 MHz
VSWR*: 2.0 (Max)
Mechanical Data
Size (mm) : 21*12*0.5
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
CAN4313284109181B
Polarization: Linear
2112 Cellular-Band Chip Antenna
Peak Gain : 0.5 ~ 1 dBi(Typ.)
ANT3505B000TWPENA /
CAN4313449009181B
Freq. Range :
824~960 /1710~2170 MHz
Size (mm) : 35*5*6
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
VSWR*: 2.8 / 3.5 (Max)
Polarization: Linear
Peak Gain : 2.9 dBi(Typ.)
Freq. Range : 900/1800 MHz
VSWR*: 3.0 (Max)
3505 Penta-band Antenna
ANT1204LL00R0918A /
CAN4311759009181K
Size (mm) : 12*4*1.2
OperatingTemp.: -40 ~ 105°C
Polarization: Linear
Peak Gain : N/A
RoHS Compliance
1204 Cellular-Band Chip Antenna
ANTX100P001BWPEN3
Freq. Range :
824~960 / 1710~2170 MHz
VSWR*: 2.5 Max ( Low Band )
Size (mm) : 50*20*0.55
OperatingTemp.: -40 ~ 80°C
Cable*: Φ1.13 / 100mm
Connector: I-PEX
Penta-band PCB Antenna
3.5 Max ( High Band )
Polarization: Linear
Peak Gain : 4.2 dBi(Typ.)
Mounting: AdhesiveTape
RoHS Compliance
Short-Range
Model
Part No./ Description
ANT1204LL05R0915A /
Electrical Data
Mechanical Data
Size (mm) : 12*4*1.6
OperatingTemp.: -40 ~ 105°C
Freq. Range : 915 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : 3.32 dBi(Typ.)
CAN4311759050911K
RoHS Compliance
1204 915MHz Chip Antenna
ANT1204LL08R0870A /
Freq. Range : 870 MHz
Size (mm) : 12*4*1.6
VSWR*: 2.0 (Max)
OperatingTemp.: -40 ~ 105°C
CAN4311759080871K
Polarization: Linear
Peak Gain : 0.5 dBi(Typ.)
Freq. Range : 870 MHz
VSWR*: 2.8 (Max)
RoHS Compliance
1204 870MHz Chip Antenna
ANT1204LL17R0870A /
Size (mm) : 12*4*1.0
OperatingTemp.: -40 ~ 105°C
CAN4311759170871K
Polarization: Linear
Peak Gain : 1.05 dBi(Typ.)
RoHS Compliance
1204 870MHz PIFA Chip Antenna
ANT7020LL05R0870A /
Freq. Range : 870 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : N/A
Size (mm) : 7.0*2.0*0.7
OperatingTemp.: -40 ~ 105°C
CAN4311772050872K
RoHS Compliance
7020 870MHz Chip Antenna
ANT1204F002R0433A /
Freq. Range : 315/ 433 MHz
VSWR*: 2.0 (Max)
Size (mm) : 12*4*1.6
OperatingTemp.: -40 ~ 105°C
CAN4311059020431K
Polarization: Linear
RoHS Compliance
Peak Gain : 0.79 dBi(Typ.)
1204 433MHz Chip Antenna
ANT1204LL20R0433A /
CAN4311759200431K
Freq. Range : 315/ 433 MHz
VSWR*: 3.0 (Max)
Size (mm) : 12*4*1.2
OperatingTemp.: -40 ~ 105°C
RoHS Compliance
Polarization: Linear
Peak Gain : 0.83 dBi(Typ.)
Freq. Range : 169 MHz
VSWR*: 2.0 (Max)
1204 433MHz Chip Antenna
ANT2405F001R0169A /
Size (mm): 24*5*1.6
OperatingTemp.: -40 ~ 105°C
CAN4311050010162K
2405 169MHz Chip Antenna
Polarization: Linear
Peak Gain : N/A
RoHS Compliance
* VSWR depends on the environment
* Cable/Connector is customizable
156
Wireless Components Selection Charts
Antenna - GPS
GPS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT8010LL05R1575A /
CAN4311781051583K
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Size (mm): 8.0*1.0*1.0
OperatingTemp.: -40 ~ 105°C
8010 GPS Chip Antenna
Polarization: Linear
Peak Gain: 0.67 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
RoHS Compliance
ANT6230LL01R1575A /
CAN4311763011582K
Size (mm): 6.2*3.0*1.25
OperatingTemp.: -40 ~ 105°C
6230 GPS Chip Antenna
Polarization: Linear
Peak Gain: 2.52 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
RoHS Compliance
ANT5320LL14R1575A /
CAN4311753141582K
Size (mm): 5.3*2.0*1.2
OperatingTemp.: -40 ~ 105°C
5320 GPS PIFA Chip Antenna
Polarization: Linear
Peak Gain: 3.16 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
RoHS Compliance
ANT3216LL15R1575A /
CAN4311712151583K
Size (mm): 3.2*1.6*1.2
OperatingTemp.: -40 ~ 105°C
3216 GPS PIFA Chip Antenna
Polarization: Linear
Peak Gain: 7.32 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
RoHS Compliance
ANT1010B00FT1575A /
CAN43134200F1581B
Size (mm): 10*10*4
OperatingTemp.: -40 ~ 105°C
10104 GPS Patch Antenna
Polarization: RHCP
Peak Gain: -3 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 12*12*4
ANT1212B00BT1575A /
CAN43134220B1581B
OperatingTemp.: -40 ~ 105°C
12124 GPS Patch Antenna
Polarization: RHCP
Peak Gain: -1 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Mounting : SMD
RoHS Compliance
Size (mm): 12*12*4
ANT1212B00DT1575A /
CAN43134220D1581B
OperatingTemp.: -40 ~ 105°C
12124 GPS Patch Antenna
Polarization: RHCP
Peak Gain: -1 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 15*15*4
ANT1515B00BT1575A /
CAN43134230B1581B
OperatingTemp.: -40 ~ 105°C
15154 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 1.5 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Mounting: SMD
RoHS Compliance
Size (mm): 15*15*4
ANT1515B00DT1575A /
CAN43134230D1581B
OperatingTemp.: -40 ~ 105°C
15154 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 1.5 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 15*15*4
ANT1515B00FT1575A /
CAN43134230F1581B
OperatingTemp.: -40 ~ 105°C
15154 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 1.5 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 18*18*2
ANT1818B00AT1575A /
CAN43134240A1581B
OperatingTemp.: -40 ~ 105°C
18182 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 2 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Mounting: SMD
RoHS Compliance
Size (mm): 18*18*4
ANT1818B00BT1575A /
CAN43134240B1581B
OperatingTemp.: -40 ~ 105°C
18184 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 4 dBic(Typ.)
Mounting: SMD
RoHS Compliance
* VSWR depends on the environment
157
Wireless Components Selection Charts
Antenna - GPS
GPS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1818B00CT1575A /
CAN43134240C1581B
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Size (mm): 18*18*2
OperatingTemp. : -40 ~ 105°C
18182 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 2 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 18*18*4
ANT1818B00DT1575A /
CAN43134240D1581B
OperatingTemp. : -40 ~ 105°C
18184 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 4 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 18*18*2
ANT1818B00ET1575A /
CAN43134240E1581B
OperatingTemp. : -40 ~ 105°C
18182 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 2 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*2
ANT2525B00AT1575A /
CAN43134250A1581B
OperatingTemp. : -40 ~ 105°C
25252 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: SMD
RoHS Compliance
Size (mm): 25*25*4
ANT2525B00BT1575A /
CAN43134250B1581B
OperatingTemp. : -40 ~ 105°C
25254 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: SMD
RoHS Compliance
Size (mm): 25*25*2
ANT2525B00CT1575A /
CAN43134250C1581B
OperatingTemp. : -40 ~ 105°C
25252 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*4
ANT2525B00DT1575A /
CAN43134250D1581B
OperatingTemp. : -40 ~ 105°C
25254 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*2
ANT2525B00ET1575A /
CAN43134250E1581B
OperatingTemp. : -40 ~ 105°C
25252 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*4
ANT2525B00FT1575A /
CAN43134250F1581B
OperatingTemp. : -40 ~ 105°C
25254 GPS Patch Antenna
Polarization: RHCP
Peak Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 16*6*4
ANT1606B00DT1575A /
CAN43134460D1581B
OperatingTemp. : -40 ~ 105°C
16064 GPS Patch Antenna
Polarization: Linear
Peak Gain: -0.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Mounting: PIN
RoHS Compliance
Size (mm): 10*4*4
ANT1004B000R1575A /
CAN4311441001581K
OperatingTemp. : -40 ~ 105°C
10044 GPS Patch Antenna
Polarization: Linear
Peak Gain: 1.61 dBic(Typ.)
Mounting: SMD
RoHS Compliance
* VSWR depends on the environment
158
Wireless Components Selection Charts
Antenna - GPS / Glonass / Active Antenna
GPS+Glonass
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1818B00BT1516A /
CAN43134240B1561B
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
Size (mm): 18*18*4
OperatingTemp. : -40 ~ 105°C
18184 Gps+Glonass Patch Antenna
Polarization: Linear
Mounting: SMD
Peak Gain: 1.89 / 2.59 dBi(Typ.)
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
RoHS Compliance
Size (mm): 18*18*4
OperatingTemp. : -40 ~ 105°C
ANT1818B00DT1516A /
CAN43134240D1561B
18184 Gps+Glonass Patch Antenna
Polarization: Linear
Mounting: PIN
Peak Gain: 2.65 / 2.79 dBi (Typ.)
RoHS Compliance
ANT2525B00BT1516A /
CAN43134250B1561B
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
Size (mm): 25*25*4
OperatingTemp. : -40 ~ 105°C
25254 Gps+Glonass Patch Antenna
Polarization: Linear
Mounting: SMD
Peak Gain: 3.44 / 4.10 dBi (Typ.)
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
RoHS Compliance
Size (mm): 25*25*4
OperatingTemp. : -40 ~ 105°C
ANT2525B00DT1516A /
CAN43134250D1561B
25254 Gps+Glonass Patch Antenna
Polarization: Linear
Mounting: PIN
Peak Gain: 3.5 / 3.8 dBi (Typ.)
RoHS Compliance
Active GPS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2525JB08B1575A /
CAN4313325081581B
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Size (mm): 25*25*6.9
Cable* (mm): 1.13*75
OperatingTemp. : -30 ~ 85°C
RoHS Compliance
25256.9 GPS Active Antenna
Polarization: RHCP
LNA Gain: 16 dB (Typ.)
Antenna Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
ANT1818JB30B1575A /
CAN4313324301581B
Size (mm): 18*18*7.1
Cable* (mm): 1.37*100
OperatingTemp. : -30 ~ 85°C
RoHS Compliance
18187.1 GPS Active Antenna
Polarization: RHCP
LNA Gain: 25 dB (Typ.)
Antenna Gain: 1.54 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
ANT1515JB27B1575A /
CAN4313323271581B
Size (mm): 15*15*6.5
Cable* (mm): 1.13*100
OperatingTemp. : -30 ~ 85°C
RoHS Compliance
15156.5 GPS Active Antenna
Polarization: RHCP
LNA Gain: 20.5 dB (Typ.)
Antenna Gain: 1.0 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 1.5 (Max)
ANT1212JB27B1575A /
CAN4313322271581B
Size (mm): 12*12*6.5
Cable* (mm): 1.13*60
OperatingTemp. : -30 ~ 85°C
RoHS Compliance
12126.5 GPS Active Antenna
Polarization: RHCP
LNA Gain: 25 dB (Typ.)
Antenna Gain: -0.16 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
ANT1606JB12B1575A /
CAN4313346121581B
Size (mm): 20*6*6.4
Cable* (mm): 1.37*93
OperatingTemp. : -30 ~ 85°C
RoHS Compliance
20066.4 GPS Active Antenna
Polarization: Linear
LNA Gain: 20 dB (Typ.)
Antenna Gain: 0.35 dBi (Typ.)
Active GPS+Glonass
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT8010JLC1B1516A /
CAN4313981C11561B
Freq. Range: 1575/1602 MHz
VSWR*: 2.0 (Max)
Size (mm): 22*6*1.9
Cable* (mm): 1.13*100
OperatingTemp. : -30 ~ 85°C
RoHS Compliance
22061.9 GPS+Glonass Active Antenna Polarization: Linear
LNA Gain: 20 / 20 dB (Typ.)
Antenna Gain: 5.88 dBi(Typ.)
* VSWR depends on the environment
* Cable/Connector is customizable
159
Wireless Components Selection Charts
Antenna - Others
FM
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2405F001R0098A /
CAN4311050010882K
Freq. Range : 88 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : N/A
Size (mm): 24*5*1.6
OperatingTemp.: -40 ~ 105°C
2405 FM Chip Antenna
RoHS Compliance
ANT1105LF00R0098A /
CAN4311858000882K
Freq. Range : 88 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : N/A
Size (mm): 11*5*1.3
OperatingTemp.: -40 ~ 105°C
1105 FM (Ferrite) Chip Antenna
RoHS Compliance
SDARS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2525B00DT2300A /
CAN43134250D2301B
Freq. Range : 2320~2345 MHz
VSWR*: 2.0 (Max)
Size (mm):25*25*4
OperatingTemp.: -40 ~ 105°C
25254 SDARS Patch Antenna
Polarization: LHCP
Peak Gain : 6 dBic(Typ.)
Mounting: PIN
RoHS Compliance
1.88~2.1 GHz
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT8868LL00R1880A /
CAN4311788001881K
Freq. Range : 1880~2000 MHz
VSWR*: 2.0 (Max)
Size (mm): 8.8*6.8*0.9
OperatingTemp.: -40 ~ 105°C
8868 DECT Chip Antenna
Polarization: Linear
Peak Gain: 6.13 dBi(Typ.)
RoHS Compliance
* VSWR depends on the environment
160
Wireless Components Selection Charts
Filters
Filter (BPF)
Model
Part No./ Description
Electrical Data
Mechanical Data
BPF2012LL05R2400A /
CFL4111714052454K
Freq. Range: 2400-2500MHz
Insertion Loss: 2.0dB (Max)
VSWR*: 2.0 (Max)
Attenuation:
24dB Min @ 3200MHz
30dB Min @ 4800~5000MHz
Size(mm): 2.0*1.2*0.9
OperatingTemp.: -40~85°C
RoHS Compliance
2012 2.4G BPFType05,
H.R.3.2G
20dB Min @ 7200~7500MHz
BPF2012LL22R2400A /
CFL4111714222454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.5 dB (Max.)
VSWR*: 2.0 (Max)
Attenuation:
30dB Min @ 824~915 MHz
32dB Min @ 1920~1980 MHz
Size(mm): 2.0*1.2*0.5
OperatingTemp.: -40~85°C
RoHS Compliance
2012 2.4G BPFType22,
H.R.2.1G
16dB Min @ 2110~2170 MHz
35dB Min @ 4800~5000 MHz
23dB Min @ 7200~7500 MHz
Attenuation:
40dB Min @ 880~960 MHz
40dB Min @ 1710~1990 MHz
BPF2012LM17R2400A /
CFL4111514172454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.6dB (Max.)
VSWR*: 2.0 (Max)
Size(mm): 2.0*1.2*0.9
OperatingTemp.: -25~85°C
RoHS Compliance
2012 2.4G BPFType17,
H.R.2.1G
20dB Min @ 2110~2170 MHz
30dB Min @ 4800~5000 MHz
30dB Min @ 7200~7500 MHz
Attenuation:
30dB Min @ 824~915 MHz
30dB Min @ 1545~1605 MHz
BPF2012LM47R2400A /
CFL4111514472454K
Freq. Range: 2400-2500MHz
Insertion Loss: 1.8dB (Max)
VSWR*: 2.0 (Max)
Size(mm): 2.0*1.2*0.8
OperatingTemp.: -40~85°C
RoHS Compliance
2012 2.4G BPFType47,
H.R.2.1G
35dB Min @1710~1990 MHz
30dB Min @2170 MHz
30dB Min @ 4800~5000 MHz
25dB Min @ 7200~7500 MHz
Attenuation:
BPF2012LM09R2400A /
CFL4111514092454K
Freq.Range: 2400-2500MHz
Insertion Loss: 1.2dB (Max)
VSWR*: 2.0 (Max)
Size(mm): 2.0*1.2*0.9
OperatingTemp.: -40~85°C
RoHS Compliance
15dB Min @1600MHz
25dB Min @3200MHz
2012 2.4G BPFType09
20dB Min @4800~5000MHz
Attenuation:
30dB Min@1280~3000MHz
25dBMin@ 3300~4000MHz
BPF2012LL01R5000A /
CFL4111714015004K
Freq. Range: 4900-5950 MHz
Insertion Loss: 1.5dB (Max)
VSWR*:2.0 (Max)
Size(mm): 2.0*1.2*1
OperatingTemp.:
RoHS Compliance
2012 5G BPFType01
25dBMin@ 9800~11900MHz
Attenuation:
30dB Min @ 2400~2500MHz
20dB Min @ 4700MHz
BPF2012LL05R5000A /
CFL4111714055004K
Freq. Range: 5150-5850 MHz
Insertion Loss: 1.8dB (Max)
VSWR*: 2.0 (Max)
Size(mm): 2.0*1.2*0.8
OperatingTemp.: -40~85°C
RoHS Compliance
2012 5G BPFType05
BPF1608LM02R2400A /
CFL4111515022454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 1.7 dB (Max)
VSWR*: 2.0 (Max)
Attenuation:
30dB Min @ 880~960 MHz
20dB Min @ 1710~1990 MHz
Size(mm): 1.6*0.8*0.6
OperatingTemp.: -40~85°C
RoHS Compliance
1608 2.4G BPFType02
8.5dB Min@ 2170 MHz
20dB Min @ 4800~5000 MHz
25dB Min @ 7200~7500 MHz
Attenuation:
40dB Min @ 880~915 MHz
38dB Min @ 1710~1850 MHz
BPF1608LM07R2400A /
CFL4111515072454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 3.2 dB (Max.)
VSWR*: 2.0 (Max)
Size(mm): 1.6*0.8*0.6
OperatingTemp.: -40~85°C
RoHS Compliance
1608 2.4G BPFType07
40dB Min @ 1850~1910 MHz
40dB Min @ 1920~1990 MHz
35dB Min @ 2110~2170 MHz
30dB Min @ 4800~5000 MHz
30dB Min @ 7200~7500 MHz
* VSWR depends on the environment
161
Wireless Components Selection Charts
Filter
Filter (BPF)
Model
Part No./ Description
Electrical Data
Mechanical Data
BPF1608LM17R2400A /
CFL4111515172454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.7 dB (Max.)
VSWR*: 2.0 (Max)
Attenuation:
38dB Min @ 880~915 MHz
35dB Min @ 1710~1850 MHz
Size(mm): 1.6*0.8*0.6
OperatingTemp.: -40~85°C
RoHS Compliance
1608 2.4G BPFType17
35dB Min @ 1850~1910 MHz
35dB Min @ 1920~1990 MHz
25dB Min @ 2110~2170 MHz
30dB Min @ 4800~5000 MHz
30dB Min @ 7200~7500 MHz
Attenuation:
BPF1608LM11R2400A /
CFL4111515112454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 1.8 dB (Max.)
VSWR*: 2.0 (Max)
Size(mm): 1.6*0.8*0.6
OperatingTemp.: -40~85°C
RoHS Compliance
20dB Min @ 1710~1990 MHz
6.5dB Min @ 2110~2170 MHz
1608 2.4G BPFType11
25dB Min @ 4800~5000 MHz
20dB Min @ 7200~7500 MHz
Attenuation:
38dB Min @ 880~915 MHz
35dB Min @ 1710~1850 MHz
BPF1608LM37R2400A /
CFL4111515372454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.8 dB (Max.)
VSWR*: 2.0 (Max)
Size(mm): 1.6*0.8*0.6
OperatingTemp.: -40~85°C
RoHS Compliance
1608 2.4G BPFType37
35dB Min @ 1850~1910 MHz
35dB Min @ 1920~1990 MHz
30dB Min @ 2110~2170 MHz
35dB Min @ 4800~5000 MHz
25dB Min @ 7200~7500 MHz
Filter (LPF)
Model
Part No./ Description
Electrical Data
Mechanical Data
LPF1608LL53R2400A /
CFL4111715532454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 0.48dB (Max)
VSWR*: 1.5 (Max)
Attenuation:
35dB Min @ 4800~5000 MHz
27dB Min @ 7200~7500 MHz
Size(mm): 1.6*0.8*0.65
OperatingTemp.: -40~85°C
RoHS Compliance
1608 2.4G LPFType53
Part No./ Description
Filter (Diplexer)
Model
Electrical Data
Mechanical Data
DPX2012LL85R2455A /
CFL4111714852524K
Freq. Range: 2400-2500MHz/
4900-5900MHz
Attenuation:
20dB Min @ 4900~5900 MHz
20dB Min @ 2400~2500 MHz
Size(mm): 2.0*1.2*0.85
OperatingTemp.: -40~85°C
RoHS Compliance
Insertion Loss:
Low : 0.7dB/
High: 0.9dB
2012 2.4/5GHz Diplexer
Type85
VSWR*: 2.0 (Max)
DPX2012LL89R2455A /
CFL4111714892524K
Freq. Range: 2400-2500MHz/
4900-5950MHz
Attenuation:
Size(mm): 2.0*1.2*0.5
20dB Min.,2f0@4800~5000 MHz OperatingTemp.: -40~85°C
20dB Min.,3f0@7200~7500 MHz RoHS Compliance
20dB Min. @ 824~915 MHz
Insertion Loss:
Low : 0.5dB/
High: 0.65dB
2012 2.4/5GHz Diplexer
Type89
20dB Min. @1800~2500 MHz
10dB Ref.,2f0@9800~11900
MHz
VSWR*: 2.0 (Max)
* VSWR depends on the environment
162
Wireless Components Selection Charts
Filters
Balun
Model
Part No./ Description
Electrical Data
Mechanical Data
BLN1608LL01R5000A/
CBA4711715015004K
Freq. Range: 4900-5950MHz
Unbalanced Impedance:
50Ω
Size(mm): 1.6*0.8*0.65
Insertion Loss: 1.2 dB (Max)
VSWR*: 2.0 (Max)
Balanced Impedance: 100Ω OperatingTemp.: -40~85°C
Phase Difference:
RoHS Compliance
1608 5G BalunType01, 50100
180 ±10 degree
Amplitude Difference:
1.5 dB (Max)
BLN1608LL00R2400A/
CBA4711715002454K
Freq. Range: 2400-2500MHz
Unbalanced Impedance:
50Ω
Size(mm): 1.6*0.8*0.65
Insertion Loss: 1.2 dB (Max)
VSWR*: 2.0 (Max)
Balanced Impedance: 50Ω
Phase Difference:
180 ±10 degree
OperatingTemp.: -40~85°C
RoHS Compliance
1608 2.4G BalunType00, 5050
Amplitude Difference:
1 dB (Max)
BLN1608LL01R2400A/
CBA4711715012454K
Freq. Range: 2400-2500MHz
Unbalanced Impedance:
50Ω
Size(mm): 1.6*0.8*0.65
Insertion Loss: 1.1 dB (Max)
VSWR*: 2.0 (Max)
Balanced Impedance: 100Ω OperatingTemp.: -40~85°C
Phase Difference:
RoHS Compliance
1608 2.4G BalunType01, 50100
180 ±10 degree
Amplitude Difference:
2 dB (Max)
Balance Filter (Combo)
Model
Part No./ Description
Electrical Data
Mechanical Data
BLF2012LL98R2400A/
CBA4711714982454K
Freq. Range: 2400-2500MHz
Insertion Loss: 3.5dB (Max)
VSWR*: 2.0 (Max)
Attenuation:
40dB Min@880~960MHz
25dB Min@1300~1600MHz
Size(mm): 2.0*1.2*0.9
OperatingTemp.: -40~85°C
RoHS Compliance
2012 2.4G ComboType98
Unbalanced Impedance:
35dB Min@4800~5000MHz
50Ω
Balanced Impedance:
Conjugate match to CSR
BC03/04 series
30dB Min@7200~7500MHz
Phase Difference:
180 ±5 degree @25°C
Amplitude Balance:
1.0 dB (Max)
BLF2012LM37R2400A/
CBA4711514372454K
Freq. Range: 2400-2500MHz
Insertion Loss: 2.8 dB (Max)
VSWR*: 2.0 (Max)
Attenuation:
35dB Min@880~960MHz
30dB Min@1710~1880MHz
Size(mm): 2.0*1.2*0.8
OperatingTemp.: -40~85°C
RoHS Compliance
2012 2.4G ComboType37
Unbalanced Impedance:
20dB Min@1880~1990MHz
50Ω
Balanced Impedance:
Conjugate match to CSR
BC04/05/06 series
30dB Min@4800~5000MHz
Phase Difference:
180 ±10 degree @25°C
Amplitude Balance:
1.5 dB (Max)
BLF2012LM31R2400A/
CBA4711514312454K
Freq. Range: 2400-2500MHz
Insertion Loss: 3.1dB (Max)
VSWR*:
Attenuation:
35dB Min@880~960MHz
30dB Min@1710~1880MHz
Size(mm): 2.0*1.2*0.8
OperatingTemp.: -40~85°C
RoHS Compliance
2012 2.4G ComboType31
Unbalanced Impedance:
20dB Min@1880~1990MHz
50Ω
Balanced Impedance:
Conjugate match to MTK
MT6616 series
30dB Min@4800~5000MHz
Phase Difference:
180 ±10 degree @25°C
Amplitude Balance:
1.5 dB (Max)
* VSWR depends on the environment
163
Wireless Components Selection Charts
Product information - Ordering Information
Explanation of ordering code - New
Ordering example : ANT3216A063R2400A
ANT 3216
A
063
R
2400
A
Product Type (code 1)
ANT: Antenna
Factory Control Code /
Cable Type (code 7)
BPF: Band-Pass Filter
LPF: Low-Pass Filter
BLN: Balun
Frequency Band (MHz)(code 6)
BLF: Balun Filter
DPX: Diplexer
2400: 2.4 – 2.5 GHz;
2455: 2.4&5 GHz
1575:ꢀGPS;ꢀ1516:ꢀGPS+Glonass
0433: 433 MHz
0870: 868 MHz
(1) Size (mm) - SMD (LTCC) (code 2)
0918:ꢀ900/1800ꢀMHz
3216: 3.2 x 1.6 mm
2012: 2.0 x 1.2 mm
WQUD:ꢀ850/900/1800/1900ꢀMHz
WPEN:ꢀ850/900/1800/1900/2100ꢀMHz
2520: 2.5 x 2.0 mm
(2) Connector - Cable length (mm)
Stand-alone (code 2)
Ex: X100 – IPEX connector, 100 mm cable length
X:ꢀIPEX,ꢀM:ꢀMMCX,ꢀS:ꢀSMA,ꢀZ:ꢀStripped
100: 100 mm cable length
Packing Style (code 5)
R: Tape & Reel
T: Tray
B: Bulk
Type (code 3)
L,ꢀF,ꢀA:ꢀChipꢀantennaꢀ/ꢀFilterꢀ/ꢀBalunꢀ
B: Bulk antenna
P: PCB
Serial No. (code 4)
X: FPCB
S: Metal
E: External
J: Integrated antenna
164
Wireless Components Selection Charts
Product Information - Ordering Information
Explanation of ordering code - Antenna (old)
Ordering example : CAN4311792042453K
CAN43 11
7 92 04 245 3K
Series name (code 1)
Packing Quantity (code 7)
CAN43 = Antenna products
3K = 3,000 pcs per reel
Packing Style (code 2)
Working Frequency (code 6)
11=Reel
245 = 2.4 ~ 2.5 GHz
Material (code 3)
Size (code 4)
Antenna Type (code 5)
Explanation of ordering code - Filter / Diplexer / Balun / Combo (old)
Ordering example : CFL4X11714002453K
CFL4X 11
7
14 00 245 3K
Product Family (code 1)
CFL41= Filter & Diplexer
Packing Quantity (code 7)
3Kꢀ=ꢀ3000ꢀpcs/reelꢀ;ꢀplasticꢀ
4Kꢀ=ꢀ4000ꢀpcs/reelꢀ;ꢀplastic
CBA47= Balun & Combo
Packing Style (code 2)
11=Tape
Working Frequency (code 6)
245 = 2.4-2.5GHz (BT, WLAN)
500 = 5 GHz
13=Bulk
350 = 3-3.5GHz (WiMAX)
252ꢀ=ꢀ2.45/5GHzꢀDualꢀBandꢀ(WLAN)
237 = 2.3-2.7GHz (WiMAX)
Material (code 3)
Size (mm) (code 4)
11 = 3.2*2.5
Type (code 5)
12 = 3.2*1.6
13 = 2.5*2.0
14 = 2.0*1.2
15 = 1.6*0.8
16 = 1.0*0.5
165
Wireless components Engineering Design Kits
Sample Kits
M2M Application : Antenna
Ordering code ANTSB000000020140
Product Series
PART NUMBER
Frequency Range (MHz)
ANT1204F001R2400A
ANT8010LL04R2400A
ANT5320LL24R2400A
ANT3216A063R2400A
ANT3216LL00R2400A
ANT2012LL13R2400A
ANTX200P001B24003
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
2400 - 2500
5150 - 5875
2400 - 2500
5150 - 5875
2400 - 2500
5150 - 5875
2400 - 2500
5150 - 5875
1575
2.4GHz
ANT5320LL04R2455A
ANT5320LL24R2455A
ANTX100P001B24553
ANTX200P002B24553
2.4/5 GHz
ANT6230LL01R1575A
ANT5320LL14R1575A
ANT3216LL15R1575A
ANT1212B00DT1575A
ANT1515B00FT1575A
ANT1818B00AT1575A
ANT2525B00BT1575A
ANT2525B00FT1575A
ANT1818B00BT1516A
ANT1818B00DT1516A
ANT2525B00BT1516A
ANT2525B00DT1516A
ANT1818JB30B1575A
ANT5320LL17R1524A
1575
1575
1575
GPS
1575
1575
1575
1575
1575 / 1602
1575 / 1602
1575 / 1602
1575 / 1602
1575
GPS& GLONASS
Active GPS
2.4GHz + GPS
1575 / 2400
824 - 960
1710 - 1990
900 / 1800
824 - 960
1710 - 2170
824 - 960
1710 - 2170
169
ANT2112A010B0918A
ANT1204LL00R0918A
ANT3505B000TWPENA
CellularWWAN
ANTX100P001BWPEN3
ANT2405F001R0169A
ANT1204F002R0433A
ANT1204LL08R0870A
ANT1204LL05R0915A
ANT1105LF00R0098A
ANT2525B00DT2300A
315 / 433
870
Short-Range
915
FM
88
SDARS
2320 - 2345
166
MULTILAYER CHIP VARISTORS
MLV Product Selection Charts
Multilayer Chip Varistors, 0402 to 1206
Features
•ꢀ Excellent clamping voltage
•ꢀ Excellent energy dissipation capability
•ꢀ Quick response time (<1n sec)
•ꢀ Adjustableꢀcapacitanceꢀvalues
•ꢀ High reliability
•ꢀ High transient current capability
•ꢀ Symmetrical voltage-current characteristics
Construction
Case dimensions
Case size designation
Dimensions in mm
Inch-based
0402
L1
W
T
L2ꢀ/ꢀL2 min
0.15
L2ꢀ/ꢀL3 max
0.30
L4 min
0.40
0.40
0.55
1.40
1.0 ±0.10
1.6 ±0.15
2.0 ±0.20
3.2 ±0.15
0.5 ±0.10
0.8 ±0.10
1.25 ±0.10
1.6 ±0.15
0.5 ±0.10
0.8 ±0.10
T
W
0603
0.20
0.60
L2
L4
L1
L3
0805
0.25
0.75
0.85 ±0.10
1206
0.25
0.75
Thicknessꢀclassificationꢀandꢀpackingꢀquantities
8 mm tape width per reel
Thicknessꢀclassificationꢀ
Type
(mm)
180ꢀmmꢀ/ꢀ7”
Paper
0402
0603
0805
1206
0.50 ±0.10
0.80 ±0.10
0.85 ±0.10
0.85 ±0.10
10 000
4 000
4 000
4 000
168
MLV Product Selection Charts
Specification for 0402
MLV
General purpose
0402
Maximum
working voltage
5.5 V
5.5 V
9 V
14 V
14 V
18 V
18 V
18 V
30 V
Varistor voltage
tolerance
10 ~ 14 V
(S)
7.2 ~ 10.8V 10.2~13.8V
18~24 V
(S)
16.2~19.8V
(K)
24~34 V
(S)
50~80 V
(S)
21.6~26.4 V
(K)
50~80 V
(S)
(M)
(L)
(code 8)
1 pF
3 pF
0.5 ±0.10
0.5 ±0.10
5 pF
10 pF
15 pF
22 pF
27 pF
33 pF
0.5 ±0.10
40 pF
50 pF
0.5 ±0.10
0.5 ±0.10
82 pF
100 pF
120 pF
160 pF
200 pF
250 pF
300 pF
360 pF
470 pF
480 pF
650 pF
900 pF
Tape width
0.5 ±0.10
0.5 ±0.10
0.5 ±0.10
0.5 ±0.10
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
169
MLV Product Selection Charts
Specification for 0603
MLV
General purpose
0603
Maximum
working voltage
5.5 V
5.5 V
9 V
9 V
14 V
14 V
18 V
30 V
Varistor voltage
tolerance
10 ~ 14 V (S) 7.2 ~ 10.8 V (M) 14~ 18 V (S) 9.6 ~ 14.4 V (M) 18 ~ 24 V (S) 16.2 ~ 19.8 V (K) 24 ~ 32 V (S)
50 ~ 80 V (S)
(code 8)
1 pF
3 pF
0.80 ±0.10
5 pF
9 pF
10 pF
15 pF
22 pF
33 pF
50 pF
82 pF
0.80 ±0.10
0.80 ±0.10
100 pF
120 pF
160 pF
180 pF
200 pF
250 pF
300 pF
350 pF
360 pF
470 pF
650 pF
680 pF
800 pF
900 pF
Tape width
0.80 ±0.10
0.80 ±0.10
0.80 ±0.10
0.80 ±0.10
0.80 ±0.10
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
170
MLV Product Selection Charts
Specification for 0805
MLV
General purpose
0805
Maximum
working voltage
5.5 V
9 V
14 V
16 V
18 V
26 V
30 V
38 V
Varistor voltage
tolerance
7.2 ~ 10.8 V (M) 10.8 ~ 14.6 V (L) 16.3 ~ 20.7 V (K) 20 ~ 27 V (S) 19.27 ~ 28.8 V (M) 29.7 ~ 36.3 V (K) 36.9 ~ 45.1 V (K) 45 ~ 58 V (S)
(code 8)
100 pF
160 pF
0.85 ±0.10
0.85 ±0.10
0.85 ±0.10
250 pF
0.85 ±0.10
400 pF
0.85 ±0.10
0.85 ±0.10
0.85 ±0.10
500 pF
0.85 ±0.10
600 pF
900 pF
1.1 nF
3.3 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
171
MLV Product Selection Charts
Specification for 1206
MLV
General purpose
1206
Maximum
working voltage
5.5 V
14 V
18 V
26 V
30 V
38 V
working voltage
7.2 ~ 10.8 V (M)
16.3 ~ 20.7 V (K)
19.27 ~ 28.8 V (M)
29.7 ~ 36.3 V (K)
36.9 ~ 45.1 V (K)
45 ~ 58 V (S)
100 pF
160 pF
0.85 ±0.10
250 pF
0.85 ±0.10
400 pF
0.85 ±0.10
0.85 ±0.10
500 pF
0.85 ±0.10
600 pF
800 pF
0.85 ±0.10
900 pF
1.1 nF
3.3 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
172
MLV Product Selection Charts
Ordering information for 0402 to 1206
Global part number
Ordering example: VRS0402KR55R680N
V R
S
0 4 0 2 K R 5 5 R 6 8 0
N
Series name (code 1-2)
VR = Varistor
Capacitance tolerance (code 16)
K = ± 10 %
L = ± 15 %
Chip type (code 3)
S = Single chip
M = ± 20 %
N = ± 30 %
Size code (code 4-7)
Capacitance value (code 13-15)
680 = 68 pF
0402
0603
0805
1206
(2ꢀsignificantꢀdigits+numberꢀofꢀzeros;ꢀ
theꢀ3rdꢀdigitꢀsignifiesꢀtheꢀmultiplyingꢀ
factor, and letter R is decimal point)
0 = x 1
Varistor voltage tolerance (code 8)
K = ±10 %
1 = x 10 1
L = ±15 %
M = ±20 %
S = Special range
Maximum working voltage (code 10-12)
33R = 3.3 V
55R = 5.5 V
090 = 9 V
Packing style (code 9)
Rꢀ=ꢀpaperꢀtapeꢀreelꢀØ7ꢀinch
110 = 11 V
120 = 12 V
140 = 14 V
150 = 15 V
160 = 16 V
180 = 18 V
190 = 19 V
220 = 22 V
260 = 26 V
300 = 30 V
310 = 31 V
380 = 38 V
173
YAGEO - A GLOBAL COMPANY
ASIA
Dongguan, China
Tel.ꢀ+86ꢀ769ꢀ8772ꢀ0275
Fax.ꢀ+86ꢀ769ꢀ8791ꢀ0053
Hong Kong, China
Tel.ꢀ+852ꢀ2342ꢀ6833
Fax.ꢀ+852ꢀ2342ꢀ6588
Mudu, China
Tel.ꢀ+86ꢀ512ꢀ6651ꢀ8889
Fax.ꢀ+86ꢀ512ꢀ6651ꢀ9889
Qingdao, China
Tel.ꢀ+86ꢀ532ꢀ8797ꢀ0533
Fax.ꢀ+86ꢀ532ꢀ8797ꢀ0533
Suzhou, China
Tel.ꢀ+86ꢀ512ꢀ6825ꢀ5568
Fax.ꢀ+86ꢀ512ꢀ6825ꢀ5386
Tokyo, Japan
Tel.ꢀ+81ꢀ3ꢀ6809ꢀ3972
Fax.ꢀ+81ꢀ3ꢀ6809ꢀ3982
Seongnam, Korea
Tel.ꢀ+82ꢀ31ꢀ712ꢀ4797
Fax.ꢀ+82ꢀ31ꢀ712ꢀ5866
Kuala Lumpur, Malaysia
Tel.ꢀ+60ꢀ3ꢀ8063ꢀ8864
Fax.ꢀ+60ꢀ3ꢀ8063ꢀ7376
Singapore
Tel.ꢀ+65ꢀ6244ꢀ7800
Fax.ꢀ+65ꢀ6244ꢀ4943
Taipei, Taiwan
Tel.ꢀ+886ꢀ2ꢀ6629ꢀ9999
Fax.ꢀ+886ꢀ2ꢀ6628ꢀ8886
EUROPE
Roermond, Benelux
Tel.ꢀ+31ꢀ475ꢀ385ꢀ555
Fax.ꢀ+31ꢀ475ꢀ385ꢀ589
Munich, Germany
Tel.ꢀ+49ꢀ8990ꢀ7784ꢀ380
Fax.ꢀ+49ꢀ8990ꢀ7784ꢀ379
Szombathely, Hungary
Tel.ꢀ+36ꢀ94ꢀ517ꢀ702
Fax.ꢀ+36ꢀ94ꢀ517ꢀ701
Milan, Italy
Tel.ꢀ+39ꢀ02ꢀ6129ꢀ1017
Fax.ꢀ+39ꢀ02ꢀ6601ꢀ7490
Moscow, Russian Federation
Tel.ꢀ+7ꢀ965ꢀ408ꢀ18ꢀ11
Fax.ꢀ+7ꢀ498ꢀ610ꢀ07ꢀ07
NORTH AMERICA
San Jose, U.S.A.
Tel.ꢀ+1ꢀ408ꢀ240ꢀ6200
Fax.ꢀ+1ꢀ408ꢀ240ꢀ6201
ForꢀaꢀcompleteꢀlistingꢀofꢀallꢀYageoꢀsalesꢀoffices,ꢀdistributors,ꢀandꢀrepresentatives,ꢀpleaseꢀvisitꢀ"contactꢀus"ꢀat
www.yageo.com
©
YAGEO Corporation
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
Printed in Taiwan
Document order number : YL 100 00144
Date of release: January 2014
相关型号:
9C08052A7681FKPF3
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 7680ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP, LEAD FREE
YAGEO
9C08052A7681FKPF4
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 7680ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP, LEAD FREE
YAGEO
©2020 ICPDF网 联系我们和版权申明