AT1206BRD0726R1L [YAGEO]
RES SMD 26.1 OHM 0.1% 1/4W 1206;
| 型号： | AT1206BRD0726R1L |
| 厂家： | 
YAGEO CORPORATION |
| 描述： | RES SMD 26.1 OHM 0.1% 1/4W 1206 |
| 文件： | 总9页 (文件大小：637K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
THIN FILM CHIP RESISTORS
AUTOMOTIVE GRADE
AT series
0.1% TO 1%, TC 15 TO TC50
sizes 0402/0603/0805/1206
RoHS compliant
Product specification
2
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER
This specification describes AT0402 to
AT1206 high precision-high stability
chip resistors with lead-free
terminations made by thin film
process.
Part number is identified by the series name, size, tolerance, packaging
type, temperature coefficient, taping reel and resistance value.
GLOBAL PART NUMBER
AT XXXX X X X XX XXXXX L
( )
1
( ) ( ) ( ) ( )
( )
6
( )
7
2
3
4
5
( )
1 SIZE
APPLICATIONS
Automotive electronics
Industrial and medical equipment
Test and measuring equipment
Telecommunications
0402 / 0603 / 0805 / 1206
( )
2 TOLERANCE
B = ±0.1%
C = ±0.25%
D = ±0.5%
F = ±1%
FEATURES
AEC-Q200 qualified
( )
3 PACKAGING TYPE
Superior resistance against sulfur
R = Paper taping reel
containing atmosphere
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
Moisture sensitivity level: MSL 1
C = ± 15 ppm/°C
D = ± 25 ppm/°C
E = ± 50 ppm/°C
Products with lead free
terminations meet RoHS
requirements
Reducing environmentally
( )
5 TAPING REEL
hazardous wastes
07 = 7 inch dia. Reel
High component and equipment
( )
6 RESISTANCE VALUE
reliability
There are 2~4 digits indicated the resistor value.
Letter R/K/M is decimal point
Example: 100R = 100Ω
Non-forbidden materials used in
products/production
Halogen free epoxy
1K = 1,000Ω
(7) DEFAULT CODE
Letter L is the system default code for ordering only. (NOTE)
ORDERING EXAMPLE
The ordering code of a AT0402 chip resistor, TC 25 value 56Ω with ±
0.5% tolerance, supplied in 7-inch tape reel is: AT0402DRD0756RL.
NOTE
1. All our Rchip products meet RoHS compliant and Halogen Free. "LFP" of the
internal 2D reel label mentions "Lead Free Process".
2. On customized label, "LFP" or specific symbol can be printed.
www.yageo.com
Oct. 24, 2017 V5
Product specification
3
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
MARKING
AT0402
No marking
Fig. 1
AT0603
E-96 series: including values 10/11/13/15/20/75 of E-24 series, 3 digits
Fig. 3
Value = 12.4 Ω
E-24 series: exception values 10/11/13/15/20/75 of E-24 series, one short bar
under marking letter
563
Fig. 4
Value = 56 KΩ
AT0805 / AT1206
Both E-24 and E-96 series: 4 digits
First three digits for significant figure and 3rd digit for number of zeros
00
Fig. 5 Value = 10 KΩ
NOTE
For further marking information, please see special data sheet “ Chip resistors marking” .
CONSTRUCTION
OUTLINES
A metal film layer is deposited on a high
grade ceramic body (aluminium oxide).
This resistive layer is trimmed to its
nominal value and on both ends a contact
is made which will guarantee optimum
solderability. This is achieved by applying
several layers and for ease of soldering the
outer layer consists of Ni/matte tin. The
resistive layer is covered with a protective
coating.
Fig. 6 Chip resistor outlines
www.yageo.com
Oct. 24, 2017 V5
Product specification
4
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
DIMENSIONS
Table 1
TYPE
L (mm)
1.00 ±0.10
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
W (mm)
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
H (mm)
0.30 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
I1 (mm)
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
I2 (mm)
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
AT0402
AT0603
AT0805
AT1206
ELECTRICAL CHARACTERISTICS
Table 2
Resistance Range (E-24/E-96 series)( ) & Tolerance
Dielectric
Ω
Operating
Temperature
Range
Max.
Max.
Power
Working Overload Withstanding
T.C.R. (ppm/°C)
0.1%
±
0.25%
±
0.5%
±
1%
±
Rating Voltage Voltage
Voltage
TYPE
±15
10~11K
AT0402
1/16W
1/10W
1/8W
50 V
75V
100 V
150 V
300 V
400 V
100 V
±25 , ±50
10~100K
±15
10~14K
AT0603
AT0805
AT1206
100 V
300 V
500 V
±25 , ±50
10~330K
–55 °C to +155 °C
±15
10~17K
10~1M
150 V
200 V
±25 , ±50
±15
10~20K
10~1M
1/4W
±25, ±50
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
QUANTITY PER REEL
10,000 Units
PRODUCT TYPE
AT0402
PATKING STYLE
Paper taping reel
Paper taping reel
REEL DIMENSION
7" (178 mm)
7" (178 mm)
AT0603
AT0805
AT1206
5,000 Units
Paper taping reel
Paper taping reel
7" (178 mm)
7" (178 mm)
5,000 Units
5,000 Units
NOTE: for paper tape and reel specification/dimensions, please see the special data sheet “packing” document.
www.yageo.com
Oct. 24, 2017 V5
Product specification
5
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
Range: –55 °C to +155 °C
POWER RATING
Each type rated power at 70 °C:
AT0402=1/16 W
AT0603=1/10 W
AT0805=1/8 W
AT1206=1/4 W
RATED VOLTAGE
The DC or AT (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
Fig. 10 Maximum dissipation (P ) in percentage of rated power
max
as a function of the operating ambient temperature (T
)
amb
V = (P xR)
Or max. working voltage whichever is less
Where
V=Continuous rated DC
or AC (rms) working voltage (v)
P=Rated power
R=Resistance value (Ω)
www.yageo.com
Oct. 24, 2017 V5
Product specification
6
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
IEC60115-1 4.13
PROCEDURE
REQUIREMENTS
Short Time
Overload
2.5 times of rated voltage or maximum
±(0.05%+0.05Ω)
overload voltage, the less of the above, for 5 sec
at room temperature
High
Temperature
Exposure
AEC-Q200 Test 3
1,000 hours at Tamb = 125 °C, unpowered
1,000 hours at Tamb = 155 °C, unpowered
±(0.1%+0.05Ω)
±(0.3%+0.05Ω)
±(0.1%+0.05Ω)
MIL-STD-202 Method 108
Moisture
Resistance
AEC-Q200 Test 6
Each temperature / humidity cycle is defined at
8 hours (method 106F), 3 cycles / 24 hours for
10d. with 25 °C / 65 °C 95% R.H, without steps
7a & 7b, unpowered
MIL-STD-202 Method 106
Parts mounted on test-boards, without
condensation on parts
Biased
AEC-Q200 Test 7
1,000 hours; 85 °C / 85% RH
±(0.1%+0.05Ω)
±(0.1%+0.05Ω)
Humidity
MIL-STD-202 Method 103
10% of operating power
Measurement at 24±4 hours after test conclusion
Operational
Life
AEC-Q200 Test 8
1,000 hours at 70±5 °C, RCWV applied for 1.5
hours on, 0.5 hour off, still air required
MIL-STD-202 Method 108
1,000 hours at 125 °C, derated voltage applied for ±(0.3%+0.05Ω)
1.5 hours on, 0.5 hour off, still air required
Resistance to
Soldering
Heat
AEC-Q200 Test 15
Condition B, no pre-heat of samples
Lead-free solder, 260±5 °C, 10±1
seconds immersion time
±(0.05%+0.05Ω)
MIL-STD-202 Method 210
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
Thermal
Shock
AEC-Q200 Test 16
-55/+125 °C
± (0.1%+0.05Ω)
Number of cycles is 300. Devices
mounted Maximum transfer time is 20
seconds. Dwell time is 15 minutes. Air –
Air
MIL-STD-202 Method 107
No visible damage
Solderability
- Wetting
Electrical Test not required Magnification
50X SMD conditions:
AEC-Q200 Test 18
J-STD-002
Well tinned
(>95% covered)
No visible damage
(a) Method B, aging 4 hours at 155 °C dry heat,
dipping at 235±3 °C for 5±0.5 seconds.
(b) Method B, steam aging 8 hours, dipping at
215±3 °C for 5±0.5 seconds.
(c) Method D, steam aging 8 hours, dipping at
260±3 °C for 7±0.5 seconds
www.yageo.com
Oct. 24, 2017 V5
Product specification
7
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
Board Flex /
Bending
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
Bending for 0402: 5 mm
0603/0805: 3 mm
AEC-Q200 Test 21
AEC-Q200-005
±(0.1%+0.05Ω)
1206: 2mm
Holding time: minimum 60 second
Temperature
Coefficient of
Resistance
(T.C.R.)
IEC 60115-1 4.8
At +25/–55 °C and
+25/+125°C Formula:
R2–R1
Refer to table 2
R2 - R1
T.C.R=
×106(ppm/°C)
R1(t2 t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in
ohms R2=resistance at test temperature in
ohms
Flower of
Sulfur
ASTM-B-809-95*
* Modified
Sulfur 750 hours, 105°C, unpowered.
±(4.0%+0.05Ω)
www.yageo.com
Oct. 24, 2017 V5
Product specification
8
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
- Add resistance range for ±15 ppm/°C
Version 5
Version 4
Version 3
Version 2
Version 1
Version 0
Oct. 24, 2017
Mar. 16, 2016
Dec. 11, 2015
May 11, 2015
Jun. 18, 2014
May 07, 2014
-
-
-
-
-
- Remove FOS 90°C test
- Modify Outline
- Modify FOS test
- Modify FOS test
- First issue of this specification
www.yageo.com
Oct. 24, 2017 V5
Product specification
9
9
SERIES
0402 to 1206
AT
Chip Resistor Surface Mount
LEGAL DISCLAIMER
Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaims any and all liabilities for any errors,
inaccuracies or incompleteness contained in any product related information, including but not limited to
product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or
improvements to product related information at any time and without notice.
Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular
purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo
disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for a particular purpose, non-infringement and merchantability.
Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s
knowledge of typical operating conditions for such types of applications in a generic nature. Such statements
are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a
specific customer application or use. They are intended for use only by customers with requisite knowledge and
experience for determining whether Yageo products are the correct products for their application or use. In
addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or
use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective
safeguard measures to ensure that product failure would not result in personal injury or property damage.
Yageo products are not designed for application or use in medical, life-saving, or life-sustaining devices or for
any other application or use in which the failure of Yageo products could result in personal injury or death.
Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at
their own risk and agree to fully indemnify Yageo and hold Yageo harmless.
Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for
revising this content without further notification, as long as products are unchanged. Any product change will
be announced by PCN.
www.yageo.com
Oct. 24, 2017 V5
相关型号：
©2020 ICPDF网 联系我们和版权申明