CC0805KP5BB [YAGEO]
SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS;型号: | CC0805KP5BB |
厂家: | YAGEO CORPORATION |
描述: | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS |
文件: | 总20页 (文件大小:1451K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
General Purpose & High Capacitance
Class 2, X7R
6.3 V TO 50 V
100 pF to 22 µF
RoHS compliant & Halogen Free
Product specification
2
2
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
ORDERING INFORMATION -GLOBAL PART NUMBER, PHYCOMP
CTC & 12NC
All part numbers are identified by the series, size, tolerance, TC material,
packing style, voltage, process code, termination and capacitance value.
SCOPE
This specification describes X7R
series chip capacitors with lead-
free terminations.
YAGEO BRAND ordering code
APPLICATIONS
(
)
GLOBAL PART NUMBER PREFERRED
PCs, Hard disk, Game PCs
DVDs, Video cameras
Mobile phones
CC XXXX
X
X
X7R
X
BB XXX
(1) (2) (3)
(4)
(5)
Data processing
( )
1 SIZE – INCH BASED (METRIC)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
1812 (4532)
FEATURES
Supplied in tape on reel
Nickel-barrier end termination
RoHS compliant
Halogen Free compliant
( )
2 TOLERANCE
J = ±5% (1)
K = ±10%
M = ±20%
( )
3 PACKING STYLE
R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
( )
4 RATED VOLTAGE
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
( )
5 CAPACITANCE VALUE
2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 103 = 10 x 103 = 10,000 pF = 10 nF
NOTE
1. Tolerance ±5% is not available for full product range, please contact local sales force
before ordering
www.yageo.com
May. 31, 2016 V.14
Product specification
3
3
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered
with a layer of plated tin (NiSn).
The terminations are lead-free. A
cross section of the structure is
shown in Fig.1.
Fig. 1 Surface mounted multilayer ceramic capacitor construction
DIMENSION
Table 1 For outlines see fig. 2
OUTLINES
L2 / L3 (mm) L4 (mm)
T (MM)
TYPE L1 (mm)
W (mm)
min.
max.
min.
For dimension see Table 1
0201
0.6 ±0.03
0.3 ±0.03
0.10
0.15
0.20
0.30
0.20
0.40
0402
1.0 ±0.05
0.5 ±0.05
1.6 ±0.10 (1)
1.6 ±0.15 (2)
1.6 ±0.20 (3)
2.0 ±0.10 (1)
2.0 ±0.20 (2)
3.2 ±0.15 (1)
3.2 ±0.20 (2)
3.2 ±0.30 (3)
3.2 ±0.20 (1)
0.8 ±0.10 (1)
0.8 ±0.15 (2)
0.8 ±0.20 (3)
1.25 ±0.10 (1)
1.25 ±0.20 (2)
1.6 ±0.15 (1)
1.6 ±0.20 (2)
1.6 ±0.30 (3)
2.5 ±0.20 (1)
0603
0.20
0.25
0.25
0.60
0.75
0.75
0.40
0.55
1.40
0805
Refer to
table 2 to 4
Fig. 2 Surface mounted multilayer
1206
ceramic capacitor dimension
1210
0.25
0.25
0.75
0.75
1.40
2.20
3.2 ±0.40 (2)
4.5 ±0.20 (1)
4.5 ±0.40 (2)
2.5 ±0.30 (2)
3.2 ±0.20 (1)
3.2 ±0.40 (2)
1812
NOTE
1. Dimension for size 0603, C < 2.2 µF; 0805 to 1812, C ≤ 100nF
2. Dimension for size 0603, C = 1µF; 50V; 0805 to 1812, C > 100 nF
3. Dimension for size 0603, C = 4.7µF, 6.3V; 0603, C = 2.2 µF, 16V; 1206, C = 22 µF, 16V
www.yageo.com
May. 31, 2016 V.14
Product specification
4
4
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
CAPACITANCE RANGE & THICKNESS FOR X7R
Table 2 Sizes from 0201 to 0402
0201
6.3 V
0402
CAP.
10 V
16 V
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
100 pF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
150 pF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
220 pF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
330 pF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
470 pF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
680 pF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
1.0 nF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
1.5 nF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
2.2 nF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03
3.3 nF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03
4.7 nF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03
6.8 nF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03
10 nF 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1.0 µF
2.2 µF
4.7 µF
10 µF
22 µF
0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05 0.5±0.05 0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
www.yageo.com
May. 31, 2016 V.14
Product specification
5
5
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
CAPACITANCE RANGE & THICKNESS FOR X7R
Table 3 Sizes from 0603 to 0805
0603
6.3 V
0805
CAP.
10 V
16 V
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.2
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.2
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
15 nF
22 nF
33 nF
0.8±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1
0.8±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1
0.8±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1
0.8±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1
0.8±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1
0.8±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 1.25±0.2
1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1.0 µF
2.2 µF
4.7 µF
10 µF
22 µF
0.8±0.1 1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2
1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2
0.8±0.1 0.8±0.15 1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2
1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2
1.25±0.2 1.25±0.2 1.25±0.2 1.25±0.2
1.25±0.2 1.25±0.2 1.25±0.2
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
www.yageo.com
May. 31, 2016 V.14
Product specification
6
6
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
CAPACITANCE RANGE & THICKNESS FOR X7R
Table 4 Size 1206
CAP.
1206
6.3 V
10 V
16 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.6±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
0.85±0.1
1.0±0.1
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1.0 µF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.3
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
4. Please contact local sales force for special ordering code before ordering
www.yageo.com
May. 31, 2016 V.14
Product specification
7
7
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
CAPACITANCE RANGE & THICKNESS FOR X7R
Table 5 Sizes from 1210 to 1812
1210
1812
50 V
CAP.
6.3 V
10 V
16 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.25±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.25±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.25±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.25±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.25±0.2
1.25±0.2
1.25±0.2
1.9±0.2
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.6±0.2
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1.0 µF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
1.6±0.2
1.9±0.2
1.9±0.2
2.5±0.2
2.5±0.2
1.9±0.2
1.9±0.2
2.5±0.2
2.5±0.2
1.9±0.2
1.9±0.2
2.5±0.2
1.9±0.2
1.9±0.2
2.5±0.2
2.5±0.3
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
4. Please contact local sales force for special ordering code before ordering
www.yageo.com
May. 31, 2016 V.14
Product specification
8
8
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
THICKNESS CLASSES AND PACKING QUANTITY
Table 6
Ø 180 MM / 7 INCH
Ø 330 MM / 13 INCH
SIZE
CODE
THICKNESS
CLASSIFICATION QUANTITY PER REEL
TAPE WIDTH
QUANTITY
PER BULK CASE
Paper
Blister
Paper
Blister
0201
0402
0603
0.3 ±0.03 mm
0.5 ±0.05 mm
0.8 ±0.1 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
15,000
10,000
4,000
4,000
4,000
---
---
---
50,000
50,000
15,000
20,000
15,000
---
---
---
---
50,000
15,000
10,000
8,000
5,000
---
---
---
0.6 ±0.1 mm
---
---
0805
0.85 ±0.1 mm
1.25 ±0.2 mm
0.6 ±0.1 mm
---
---
3,000
---
10,000
---
4,000
4,000
---
20,000
15,000
---
0.85 ±0.1 mm
1.00 / 1.15 ±0.1 mm
1.25 ±0.2 mm
1.6 ±0.15 mm
1.6 ±0.2 mm
---
---
---
3,000
3,000
2,500
2,000
4,000
4,000
3,000
3,000
3,000
2,000
2,000
10,000
10,000
10,000
8,000
15,000
10,000
10,000
10,000
---
---
1206
---
---
---
---
---
---
---
---
---
0.6 / 0.7 ±0.1 mm
0.85 ±0.1 mm
1.15 ±0.1 mm
1.15 ±0.15 mm
1.25 ±0.2 mm
1.5 ±0.1 mm
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
1210
---
---
---
---
1.6 / 1.9 ±0.2 mm
---
---
---
---
2,000
1,000
2.0 ±0.2 mm
2.5 ±0.2 mm
8 mm
8 mm
---
---
---
---
---
---
---
---
1,000
500
1.15 ±0.15 mm
1.25 ±0.2 mm
1.35 ±0.15 mm
1.5 ±0.1 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
---
---
---
---
---
---
---
---
---
---
---
---
---
3,000
3,000
2,000
2,000
2,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
500
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
1808
---
1.6 ±0.2 mm
8,000
---
2.0 ±0.2 mm
0.6 / 0.85 ±0.1 mm
1.15 ±0.1 mm
1.25 ±0.2 mm
1.5 ±0.1 mm
---
---
---
1812
---
1.6 ±0.2 mm
---
2.0 ±0.2 mm
---
2.5 ±0.2 mm
---
www.yageo.com
May. 31, 2016 V.14
Product specification
9
9
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
ELECTRICAL CHARACTERISTICS
X7R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 7
VALUE
DESCRIPTION
Capacitance range
Capacitance tolerance
Dissipation factor (D.F.)
X7R
100 pF to 47 µF
±5%, ±10%, ±20%
0201
0402
0603
0805
1206
1210
100pF to 10nF 100pF to 100nF
100pF to 1uF 150pF to 2.2uF 220pF to 2.2uF 2.2nF to 2.2uF
≤10V
≤5%
≤10%
≤12.5%
≤ 3.5%
≤ 5%
220nF to 470nF 2.2uF to 4.7uF 4.7uF to 10uF 4.7uF to 22uF 4.7uF to 47uF
1uF
16V
100pF to 1.2nF 100pF to 22nF 100pF to 220nF 150pF to 470nF 220pF to 1μF
2.2nF to 1μF
1.5nF to 10nF 27nF to 100nF 470nF to 2.2uF 680 nF to 2.2μF
220nF
2.2uF 2.2uF to 10uF
22uF
4.7uF to 10uF 4.7uF to 22uF
≤10%
≤ 2.5%
≤ 3.5%
≤ 5%
25V
100pF to 470pF 100pF to 10nF 100pF to 39nF 150pF to 180nF 220pF to 680nF
2.2nF to 1μF
12 nF to 47nF 47nF to 220nF 220nF to 470nF
560pF to 10nF 56nF to 100nF
680nF to 1μF
1uF
2.2uF
2.2uF
270nF to 1uF 2.2uF to 4.7uF 4.7uF to 22uF 4.7uF to 22uF
100pF to 1nF 100pF to 10nF 100pF to 39nF 150pF to 180nF 220pF to 470nF
2.2nF to 1μF
≤10%
≤2.5%
≤ 3.5%
≤ 5%
50V
12 nF to 47nF 47nF to 220nF 220nF to 470nF
680nF
680nF to 1μF
100nF
Insulation resistance after 1 minute at Ur (DC)
470nF to 1uF
1uF to 2.2uF 2.2uF to 4.7uF 2.2uF to 10uF
≤10%
Rins ≥ 10 GΩ or Rins × Cr ≥ 500(100) seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
±15%
Operating temperature range:
–55 °C to +125 °C
NOTE
Capacitance tolerance ±5% is not available for full product range, please contact local sales force before ordering
www.yageo.com
May. 31, 2016 V.14
Product specification 10
10
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
Fig. 3 Typical capacitance change as a function of
temperature
www.yageo.com
May. 31, 2016 V.14
Product specification 11
11
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
Size 0201 10 nF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0402 100 nF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
www.yageo.com
May. 31, 2016 V.14
Product specification 12
12
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
Size 0603 1 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0805 1 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
www.yageo.com
May. 31, 2016 V.14
Product specification 13
13
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
Size 1206 1 µF / 25 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 1206 10 µF / 10 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 9 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
www.yageo.com
May. 31, 2016 V.14
Product specification 14
14
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
SOLDERING RECOMMENDATION
Table 8
SOLDERING
METHOD
SIZE
0402
0603
0805
1206
≥ 4.7 µF
< 4.7 µF
≥ 1210
Reflow
≥ 0.1 µF
≥ 1.0 µF
≥ 2.2 µF
Reflow only
---
Reflow/Wave
< 1.0 µF
< 2.2 µF
< 0.1 µF
TESTS AND REQUIREMENTS
Table 9 Test procedures and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Mounting
IEC 60384- 4.3
21/22
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Visual Inspection
and Dimension
Check
4.4
Any applicable method using × 10 magnification
In accordance with
specification
Capacitance (1)
4.5.1 Class 2:
Within specified tolerance
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Dissipation
Factor (D.F.) (1)
4.5.2 Class 2:
In accordance with
specification
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Insulation
Resistance
4.5.3
At Ur (DC) for 1 minute
In accordance with
specification
NOTE:
1. For individual product specification, please contact local sales.
www.yageo.com
May. 31, 2016 V.14
Product specification 15
15
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
TEST
TEST METHOD PROCEDURE
REQUIREMENTS
<General purpose series>
Class1:
∆ C/C: ±30ppm
Temperature
Characteristic
IEC 60384- 4.6
21/22
Capacitance shall be measured by the steps shown in the
following table.
The capacitance change should be measured after 5 min
at each specified temperature stage.
Class2:
X7R: ∆ C/C: ±15%
Y5V: ∆ C/C: 22~-82%
Step
Temperature(℃)
25±2
a
b
c
<High Capacitance series>
Class2:
X7R/X5R: ∆ C/C: ±15%
Y5V: ∆ C/C: 22~-82%
Lower temperature±3℃
25±2
Upper Temperature± 2℃
25±2
d
e
(1) Class I
Temperature Coefficient shall be calculated from the
formula as below
C2 - C1
Temp, Coefficient =
106 [ppm/℃]
C1xΔT
C1: Capacitance at step c
C2: Capacitance at 125℃
∆T: 100℃(=125℃-25℃)
(2) Class II
Capacitance Change shall be calculated from the formula
as below
C2 - C1
∆C =
x 100%
C1
C1: Capacitance at step c
C2: Capacitance at step b or d
Adhesion
4.7
A force applied for 10 seconds to the line joining the
terminations and in a plane parallel to the substrate
Force
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
www.yageo.com
May. 31, 2016 V.14
Product specification 16
16
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
TEST
TEST METHOD PROCEDURE
REQUIREMENTS
Bond Strength
4.8
Mounting in accordance with IEC 60384-22
paragraph 4.3
No visible damage
<General Purpose series>
∆C/C
Conditions: bending 1 mm at a rate of 1 mm/s,
radius jig 5 mm
Class2:
X7R: ±10%
<High Capacitance series>
∆C/C
Class2:
Test Substrate:
X7R: ±10%
b
YNSC147
4.5
Dimension(mm)
Type
0201
0402
0603
0805
1206
1210
1808
a
b
c
0.3
0.4
1.0
1.2
2.2
2.2
3.5
0.9
1.5
3.0
4.0
5.0
5.0
7.0
0.3
0.5
1.2
1.65
1.65
2.0
3.7
C
a
40
100
unit:mm
Resistance to
4.9
Precondition: 150 +0/–10 °C for 1 hour, then keep Dissolution of the end face plating shall not
Soldering Heat
for 24 ±1 hours at room temperature
exceed 25% of the length of the edge
concerned
Preheating: for size ≤ 1206: 120 °C to 150 °C for 1
minute
<General Purpose series>
Preheating: for size >1206: 100 °C to 120 °C for 1
minute and 170 °C to 200 °C for 1 minute
∆C/C
Class2:
X7R: ±10%
Solder bath temperature: 260 ±5 °C
Dipping time: 10 ±0.5 seconds
Recovery time: 24 ±2 hours
<High Capacitance series>
∆C/C
Class2:
X7R: ±10%
D.F. within initial specified value
Rins within initial specified value
www.yageo.com
May. 31, 2016 V.14
Product specification 17
17
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
TEST
TEST METHOD PROCEDURE
REQUIREMENTS
Solderability
IEC 60384- 4.10
21/22
Preheated to a temperature of 80 °C to 140 °C and The solder should cover over 95% of the
maintained for 30 seconds to 60 seconds.
critical area of each termination
Test conditions for lead containing solder alloy
Temperature: 235 ±5 °C
Dipping time: 2 ±0.2 seconds
Depth of immersion: 10 mm
Alloy Composition: 60/40 Sn/Pb
Number of immersions: 1
Test conditions for lead-free containing solder alloy
Temperature: 245 ±5 °C
Dipping time: 3 ±0.3 seconds
Depth of immersion: 10 mm
Alloy Composition: SAC305
Number of immersions: 1
Rapid Change of
Temperature
4.11
Preconditioning;
150 +0/–10 °C for 1 hour, then keep for
24 ±1 hours at room temperature
No visual damage
<General Purpose series>
∆C/C
5 cycles with following detail:
Class2:
30 minutes at lower category temperature
30 minutes at upper category temperature
X7R: ±15%
<High Capacitance series>
∆C/C
Recovery time 24 ±2 hours
Class2:
X7R: ±15%
D.F. meet initial specified value
Rins meet initial specified value
www.yageo.com
May. 31, 2016 V.14
Product specification 18
18
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Damp Heat
with Ur Load
IEC 60384- 4.13
21/22
No visual damage after recovery
1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
<General Purpose series>
∆C/C
2. Initial measure:
Spec: refer to initial spec C, D, IR
Class2:
X7R: ±15%
3. Damp heat test:
500 ±12 hours at 40 ±2 °C;
90 to 95% R.H. 1.0 Ur applied
D.F.
Class2:
4. Recovery:
Class 2: 24 ±2 hours
X7R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
5. Final measure: C, D, IR
Rins
Class2:
P.S. If the capacitance value is less than the
minimum value permitted, then after the other
measurements have been made the capacitor
shall be preconditioned according to “IEC 60384
4.1” and then the requirement shall be met.
X7R: ≥ 500 MΩ or Rins x Cr ≥ 25s
whichever is less
<High Capacitance series(≥ 1uF) and
CC0402xRX7R9BB104>
∆C/C
Class2:
X7R: ±20%
D.F.
Class2:
X7R: 2 x initial value max
Rins
Class2:
X7R: 500 MΩ or Rins x Cr ≥ 25(5)s
whichever is less
www.yageo.com
May. 31, 2016 V.14
Product specification 19
19
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
TEST
TEST METHOD PROCEDURE
REQUIREMENTS
Endurance
IEC 60384- 4.14
No visual damage
1. Preconditioning, class 2 only:
21/22
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
<General Purpose series>
∆C/C
2. Initial measure:
Class2:
Spec: refer to initial spec C, D, IR
X7R: ±15%
3. Endurance test:
Temperature: X7R: 125 °C
D.F.
Specified stress voltage applied for 1,000 hours:
Applied 2.0 x Ur for general products
Applied 1.5(1.0) x Ur for high cap. products
Class2:
X7R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
4. Recovery time: 24 ±2 hours
5. Final measure: C, D, IR
Rins
Class2:
X7R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be preconditioned
according to “IEC 60384 4.1” and then the
requirement shall be met.
<High Capacitance series(≥ 1uF) and
CC0402xRX7R9BB104>
∆C/C
Class 2:
X7R: ±20%
D.F.
Class 2:
X7R: 2 x initial value max
Rins
Class 2:
X7R: 1,000 MΩ or Rins x Cr ≥ 50(10)s
whichever is less
Voltage Proof
IEC 60384- 4.6
1
No breakdown or flashover
Specified stress voltage applied for 1~5 seconds
Ur ≦ 100 V: series applied 2.5 Ur
Charge/Discharge current is less than 50 mA
www.yageo.com
May. 31, 2016 V.14
Product specification 20
20
General Purpose & High Cap.
X7R
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 13 Dec. 30, 2015
-
-
-
-
-
-
- Dimension on 0603 and 1206 case size updated
- 1210, 25V dissipation factor updated
Version 12 May 26, 2015
Version 11 Jan. 06, 2015
Version 10 Jul. 08, 2014
- 0402, 100nF, 50V Dissipation factor (D.F.) updated.
- Dimension updated
Version 9
Version 8
Aug. 19, 2013
Oct 13, 2011
- Dimension updated
- Dimension updated
- 50V Dissipation factor(D.F) updated
- Dimension updated
Version 7
Version 6
Jan 13, 2011
Oct 13, 2010
-
-
- Rated voltage of 0201 extend to 50 V
- Capacitance range of 0201 X7R 6.3V to 16V extend to 100 pF
- Capacitance range of 0805 X7R 10V extend to 10 µF
- Capacitance range of 0805 X7R 50V extend to 1 µF
- Capacitance range of 1210 X7R 10V extend to 22 µF
- Figures of impedance ESR updated
Version 5
Version 4
Version 3
Jul 27, 2010
Apr 21, 2010
Oct 26, 2009
-
-
-
- Dimension on 0603 and 1206 case size updated
- 16V to 25V Dissipation factor(D.F) updated
- The statement of "Halogen Free" on the cover added
- Dimension updated
- Capacitance range of 0402 X7R 25 V extend to 100 nF
- 16V Dissipation factor updated
Version 2
Version 1
Version 0
May 11, 2009
Apr 24, 2009
Apr 15, 2009
-
-
-
- Product range updated
- Ordering code updated
- New datasheet for general purpose and high capacitance X7R series with
RoHS compliant
- Replace the "6.3V to 50V" part of pdf files: X7R_10V_9, X7R_16V-to-
100V_9, X7R_16-to-500V_9, UP-X5R_X7R_HighCaps_6.3-to-25V_11,
UY-X5R_X7R_HighCaps_6.3-to-25V_11
- Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2
and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2
- Define global part number
- Description of "Halogen Free compliant" added
- Test method and procedure updated
www.yageo.com
May. 31, 2016 V.14
相关型号:
©2020 ICPDF网 联系我们和版权申明