PSM11AKB-15R [YAGEO]
Fixed Resistor, Wire Wound, 11W, 15ohm, 10% +/-Tol, 400ppm/Cel, 3935;型号: | PSM11AKB-15R |
厂家: | YAGEO CORPORATION |
描述: | Fixed Resistor, Wire Wound, 11W, 15ohm, 10% +/-Tol, 400ppm/Cel, 3935 |
文件: | 总2页 (文件大小:209K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Through-hole resisTors
Power Wirewound &
Vertical Lead Type
Fiberglass Cement Resistors
Normal & Miniature Style [ PSM Series ]
FeATures
Power Rating
ResistanceTolerance
T.C.R
4W, 5W, 7W, 9W, 11W, 17W
±5%, ±10%
±10ppm/°C, ±40ppm/°C, 400±50ppm/°C
DerATiNg CurVe
For resistors operated in ambient temperatures above 70°C, power rating must be derated
in accordance with the curve below.
iNTroDuCTioN
The PSM Series Resistors are wound on
Fiberglass core. The materials used and the
construction techniques ensure excellent
flame resistance, arc resistance and moisture
resistance as well as self-extinguishing
capabilities. They will withstand the most
rigorous loading test.
70
350 °C
Rated Load (%)
100
80
60
40
20
0
Ambient Temperature (°C)
-50
0
50 100 150 200 250 300 350
As resistors in radio and television receivers,
hazardous conditions such as smoking and
redheat can be completely prevented by the
proper choice of power resistors.
DiMeNsioNs
Unit: mm
sTYle
DiMeNsioN
Nꢀꢁmaꢂ
Mꢃnꢃatꢄꢁꢅ
l
W
h
ød
max.1.5
32±3
W
L
PSM400
PSM500
-
-
20±1.0
25±1.0
25±1.0
38±1.0
38±1.0
50±1.5
75±2.0
7.0±0.5
7.0±0.5
9.0±0.4
7.0±0.5
9.0±0.4
9.0±0.4
9.0±0.4
8.0±0.4
8.0±0.4
10.0±0.4
8.0±0.4
10.0±0.4
10.0±0.4
10.0±0.4
0.8±0.02
0.8±0.02
0.8±0.02
0.8±0.02
0.8±0.02
0.8±0.02
0.8±0.02
ød
-
W
*
PSM7WS
H
H
PSM700
PSM900
PSM11A
PSM17A
-
-
-
-
PSM400-700
PSM7WS/17A
* 6mm, reduced solderability in this area
69
Note:
eleCTriCAl ChArACTerisTiCs
sTYle
PsM400
PsM500
PsM7Ws
PsM700
PsM900
PsM11A
PsM17A
Power Rating at 70°C
Maximum working voltage
Voltage Proof on Insulation
Resistance Range
4W
5W
7W
9W
11W
17W
PxR
2000V
0.1Ω - 9.1KΩ
-55°C to +350°C
0.15Ω - 15KΩ
0.33Ω - 33KΩ
0.51Ω - 47KΩ
0.91Ω - 82KΩ
OperatingTemp. Range
Temperature Coefficient
±10ppm/°C, ±40ppm/°C, 400±50ppm/°C
Note: Special value is available on request
eNViroNMeNTAl ChArACTerisTiCs
PerForMANCe TesT
ShortTime Overload
Voltage Proof on Insulation
Temperature Coefficient
Insulation Resistance
Solderability
TesT MeThoD
IEC 60115-1 4.13
IEC 60115-1 4.7
IEC 60115-1 4.8
IEC 60115-1 4.6
IEC 60115-1 4.17
APPrAise
10 times rated power for 5 Sec.
±2.0%+0.05Ω
By type
inV-block for 60 Sec., test voltage by type
-55°C to +155°C
By type
inV-block for 60 Sec.
>10,000MΩ
95% Min. coverage
235±5°C for 3±0.5 Sec.
No deterioration of
coatings and markings
Solvent Resistance of Marking
IEC 60115-1 4.30
IPA for 5±0.5 Min. with ultrasonic
Robustness ofTerminations
Periodic-pulse Overload
Damp Heat Steady State
Endurance at 70°C
IEC 60115-1 4.16
IEC 60115-1 4.39
IEC 60115-1 4.24
IEC 60115-1 4.25
IEC 60115-1 4.19
IEC 60115-1 4.18
Direct load for 10 Sec. in the direction of the terminal leads
4 times RCWV 10,000 cycles (1 Sec. on, 25 Sec. off)
≥50N
±2.0%+0.05Ω
±2.0%+0.05Ω
±3.0%+0.05Ω
±2.0%+0.05Ω
±2.0%+0.05Ω
40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV
70±2°C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off)
Temperature Cycling
-55°C RoomTemp. +155°C RoomTemp. (5 cycles)
260±3°C for 10±1 Sec., immersed to a point 3±0.5mm from the body
Resistance to Soldering Heat
Revision: 201304
Note: RCWV(Rated Continuous WorkingVoltage) = Power Rating x ResistanceValue or Max. working voltage listed above, whichever less.
相关型号:
©2020 ICPDF网 联系我们和版权申明