RC0603JR-109M76 [YAGEO]
GENERAL PURPOSE CHIP RESISTORS; 通用贴片电阻型号: | RC0603JR-109M76 |
厂家: | YAGEO CORPORATION |
描述: | GENERAL PURPOSE CHIP RESISTORS |
文件: | 总9页 (文件大小:402K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GENERAL PURPOSE CHIP RESISTORS
RC0603
5%, 1%
RoHS compliant
Product specification
2
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC0603 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RC0603 X R - XX XXXX L
APPLICATIONS
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
ꢀ All general purpose application
( )
1 TOLERANCE
F = ±1%
FEATURES
J = ±5% (for Jumper ordering, use code of J)
ꢀ RoHS compliant
( )
2 PACKAGING TYPE
- Products with lead free
terminations meet RoHS
requirements
R = Paper / PE taping reel
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
- Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
– = Base on spec
( )
4 TAPING REEL
ꢀ Reducing environmentally
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
hazardous wastes
ꢀ High component and equipment
reliability
( )
5 RESISTANCE VALUE
ꢀ Saving of PCB space
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
ꢀ None forbidden-materials used
in products/production
Detailed resistance rules show in table of “Resistance rule of global part number”.
ꢀ Halogen Free Epoxy
(6) OPTIONAL CODE
L = optional symbol (Note)
Resistance rule of global part
number
ORDERING EXAMPLE
The ordering code of a RC0603
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC0603FR-0756R(L).
Resistance code rule
Example
0R
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Apr 24, 2009 V.4
Product specification
3
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322 / 2350 XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(1)
(2)
(3)
4
Last digit
X
0.01 to 0.0976
PAPER / PE TAPE ON REEL (units) (2)
0
7
8
9
1
2
3
4
5
6
TYPE/ START TOL. RESISTANCE
0603 IN (1)
(%) RANGE
X
0.1 to 0.976
5,000
10,000/not preferred
702 70xxx
704 7xxxx
-
20,000
702 81xxx
704 8xxxx
-
X
1 to 9.76
RC21
RC22
2322
2322
±5% 1 to 10 MΩ
±1% 1 to 10 MΩ
±5% 11 to 22 MΩ
702 60xxx
704 6xxxx
522 10xxx
702 96001
X
10 to 97.6
100 to 976
1 to 9.76 K
X
HRC21 2350
Jumper 2322
X
-
0 Ω
702 97001
702 92002
X
10 to 97.6 K
(1) The resistors have a 12-digit ordering code starting with 2322 / 2350.
X
100 to 976 K
X
1 to 9.76 M
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
X
10 to 97.6 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
X
0.3
X
1
(4) "L" is optional symbol (Note)
.
33 K
10 M
ORDERING EXAMPLE
X
The ordering code of a RC22 resistor, value 56 X with ±1% tolerance,
supplied in tape of 5,000 units per reel is: 232270465609(L) or
RC0603FR-0756R(L).
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added
(both are on customer request)
www.yageo.com
Apr 24, 2009 V.4
Product specification
4
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
MARKING
RC0603
E-24 series: 3 digits
03
First two digits for significant figure and 3rd digit
for number of zeros
YNSC001
Fig. 1 Value = 10 KΩ
E-96 series: 3 digits for 0603 ±1% EIA-96 marking
method
563
Fig. 3 E-24 1% Value = 56 KΩ
ynsc003
For 0603 ±1% E-24 series, one short bar under
marking letter
Fig. 2 Value = 12.4 KΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
OUTLINES
For dimension see Table 1
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination(Ni/matte tin)
ceramic substrate
I
2
overcoat
I
1
terminations (matte tin on Ni-
barrier) are added. See fig.4
W
DIMENSIONS
YNSC065
Table 1
L
TYPE
RC0603
Fig. 4 Chip resistor outlines
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
www.yageo.com
Apr 24, 2009 V.4
Product specification
5
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
RC0603 1/10 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
–55 °C to +155 °C
50 V
100 V
100 V
5% (E24) 1 Ω to 22 MΩ
Resistance Range
1% (E24/E96) 1 Ω to 10 MΩ
Zero Ohm Jumper < 0.05 Ω
1 Ω ≤ R ≤ 10Ω
±200 ppm/°C
±200 ppm/°C
±100 ppm/°C
1.0 A
Temperature Coefficient
Jumper Criteria
10 MΩ < R ≤ 22 MΩ
10 Ω < R ≤ 10 MΩ
Rated Current
Maximum Current
2.0 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
RC0603
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Paper Taping Reel (R)
7" (178 mm)
10" (254 mm)
13" (330 mm)
5,000 units
10,000 units
20,000 units
NOTE
1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC0603 rated power at 70°C is 1/10 W
P
MLB206_2
(%P
rated
)
RATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
155
o
(
C)
T
amb
or max. working voltage whichever is less
Where
Fig. 5 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Apr 24, 2009 V.4
Product specification
6
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
IEC 60115-1 4.8
PROCEDURE
REQUIREMENTS
Refer to table 2
Temperature
Coefficient of
Resistance
(T.C.R.)
At +25/–55 °C and +25/+125 °C
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
IEC 60115-1 4.25.1
IEC 60068-2-2
Life/Endurance
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(1.0%+0.05 Ω) for 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
1,000 hours at 155±5 °C, unpowered
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
MIL-STD-202G Method-106G
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(0.5%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after test conclusion
MIL-STD-202G Method-107G
Thermal Shock
-55/+125 °C
±(0.5%+0.05 Ω) for 1% tol.
±(1%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
IEC60115-1 4.13
Short Time
Overload
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
www.yageo.com
Apr 24, 2009 V.4
Product specification
7
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60068-2-21
PROCEDURE
REQUIREMENTS
Board Flex/
Bending
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05 Ω) for 1%, 5% tol.
<50 mΩ for Jumper
3 mm bending
No visible damage
Bending time: 60±5 seconds
IEC 60068-2-1
Low
Temperature
Operation
The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C
±(0.5%+0.05 Ω) for 1% tol .
±(1.0%+0.05 Ω) for 5% tol.
This constitutes shall be repeated for 96 hours
No visible damage
However the applied voltage shall not exceed
the maximum operating voltage
IEC 60115-1 4.6
IEC 60115-1 4.7
Insulation
Resistance
Rated continuous overload voltage (RCOV)
for 1 minute
≥10 GΩ
RC0603
Type
Voltage (DC)
100 V
Dielectric
Withstand
Voltage
Maximum voltage (Vrms) applied for 1 minute
No breakdown or flashover
RC0603
Type
Voltage (AC)
100 Vrms
IPC/JEDEC J-STD-020D
IEC 60115-1 4.12
Resistance to
Solvent
lsopropylalcohol (C3H7OH) followed by
brushing
No smeared
Noise
Maximum voltage (Vrms) applied
Value
Resistors range
R < 100 Ω
10 dB
20 dB
30 dB
40 dB
46 dB
48 dB
100 Ω ≤ R < 1 KΩ
1 KΩ ≤ R < 10 KΩ
10 KΩ ≤ R < 100 KΩ
100 KΩ ≤ R < 1 MΩ
1 MΩ ≤ R ≤ 22 MΩ
IEC 60115-1 4.37
Biased Humidity
(steady state)
Steady state for 1000 hours at 85 °C / 85% R.H.
Biased voltage: U = 10% of Pn (V)
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Max = Umax.
No condensation on the devices, circulating air
www.yageo.com
Apr 24, 2009 V.4
Product specification
8
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60115-1 4.39
PROCEDURE
REQUIREMENTS
Intermittent
Overload
2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDEC J-STD-002B test B
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDEC J-STD-002B test D
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(0.5%+0.05 Ω) for 1% tol .
±(1.0%+0.05 Ω) for 5% tol.
Leadfree solder, 260 °C, 10 seconds
immersion time
<50 mΩ for Jumper
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
www.yageo.com
Apr 24, 2009 V.4
Product specification
9
9
SERIES
0603 (RoHS Compliant)
RC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 4
Apr 24, 2009 -
- Test Items and methods updated
- Test requirements upgraded
Version 3
Jul 15, 2008
-
- Change to dual brand datasheet that describe RC0603 with RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2
Version 1
Aug 19, 2004 -
Aug 02, 2004 -
- New datasheet for 0603 thick film 1% and 5% with lead-free terminations
- Replace the 0603 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10,
and HRC21_5_4
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
- High ohmic products combined into standard products.
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Apr 24, 2009 V.4
相关型号:
RC0603JR-13110KL
Fixed Resistor, Metal Glaze/thick Film, 0.1W, 110000ohm, 75V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0603, CHIP
YAGEO
RC0603JR-131M5L
Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1500000ohm, 75V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0603, CHIP
YAGEO
©2020 ICPDF网 联系我们和版权申明