RC1206 [YAGEO]
GENERAL PURPOSE CHIP RESISTORS; 通用贴片电阻
| 型号： | RC1206 |
| 厂家： | 
YAGEO CORPORATION |
| 描述： | GENERAL PURPOSE CHIP RESISTORS |
| 文件： | 总10页 (文件大小：465K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GENERAL PURPOSE CHIP RESISTORS
RC1206
5%, 1%
RoHS compliant
Product specification
2
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC1206 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RC1206 X R - XX XXXX L
APPLICATIONS
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
All general purpose application
( )
1 TOLERANCE
F = ±1%
FEATURES
J = ±5% (for Jumper ordering, use code of J)
Halogen Free Epoxy
( )
2 PACKAGING TYPE
RoHS compliant
R = Paper taping reel
-
-
Products with lead free
terminations meet RoHS
requirements
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
( )
4 TAPING REEL
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
Reducing environmentally
hazardous wastes
High component and equipment
( )
5 RESISTANCE VALUE
reliability
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Saving of PCB space
None forbidden-materials used
Detailed resistance rules show in table of “Resistance rule of global part number”.
in products/production
(6) DEFAULT CODE
Letter L is system default code for order only (Note)
Resistance rule of global part
number
O
RDERING EXAMPLE
The ordering code of a RC1206
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC1206FR-0756RL.
Resistance code rule
Example
0R
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our RSMD products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
2. On customized label, "LFP" or specific
symbol can be printed
XKXX
1K = 1,000 Ω
(1 to 9.76 KΩ)
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Jul 02, 2009 V.4
Product specification
3
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322 / 2350 XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(1)
(2)
(3)
4
Last digit
PAPER / PE TAPE ON REEL (units) (2)
X
0.01 to 0.0976
0
7
8
9
1
2
3
4
5
6
TYPE/ START TOL. RESISTANCE
1206 IN (1)
(%) RANGE
X
0.1 to 0.976
5,000
10,000/not preferred
711 51xxx
724 7xxxx
-
20,000
711 81xxx
724 8xxxx
-
X
1 to 9.76
RC01
RC02
2322
2322
±5% 1 to 10 MΩ
±1% 1 to 10 MΩ
±5% 11 to 22 MΩ
711 61xxx
724 6xxxx
520 10xxx
711 91032
X
10 to 97.6
100 to 976
1 to 9.76 K
X
HRC01 2350
Jumper 2322
X
-
0 Ω
711 91005
711 92004
X
10 to 97.6 K
(1) The resistors have a 12-digit ordering code starting with 2322 / 2350.
X
100 to 976 K
X
1 to 9.76 M
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
X
10 to 97.6 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
X
0.3
X
1
(4) Letter L is system default code for order only (Note)
33 K
10 M
O
RDERING EXAMPLE
X
The ordering code of a RC02 resistor, value 56 X with ±1% tolerance,
supplied in tape of 10,000 units per reel is: 232272465609L or
RC1206FR-0756RL.
NOTE
1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol can be printed
www.yageo.com
Jul 02, 2009 V.4
Product specification
4
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
MARKING
RC1206
E-24 series: 3 digits
03
YNSC001
First two digits for significant figure and 3rd digit for number of zeros
Fig. 1 Value = 10 KΩ
Both E-24 and E-96 series: 4 digits
00
YNSC004
First three digits for significant figure and 4th digit for number of zeros
Fig. 2 Value = 10 KΩ
For further marking information, please see special data sheet “Chip resistors marking”
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
OUTLINES
For dimension see Table 1
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination (Ni/matte tin)
ceramic substrate
I
2
overcoat
I
1
terminations (matte tin on Ni-
barrier) are added. See fig.3
W
DIMENSIONS
YNSC066
Table 1
L
TYPE
RC1206
Fig. 3 Chip resistor outlines
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
3.10 ± 0.10
1.60 ± 0.10
0.55 ± 0.10
0.45 ± 0.20
0.40 ± 0.20
www.yageo.com
Jul 02, 2009 V.4
Product specification
5
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
RC1206 1/4 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
–55 °C to +155 °C
200 V
400 V
500 V
5% (E24) 1 Ω to 22 MΩ
Resistance Range
1% (E24/E96) 1 Ω to 10 MΩ
Zero Ohm Jumper < 0.05 Ω
1 Ω ≤ R ≤ 10 Ω
±200 ppm/°C
±200 ppm/°C
±100 ppm/°C
2 A
Temperature Coefficient
Jumper Criteria
10 MΩ < R ≤ 22 MΩ
10 Ω < R ≤ 10 MΩ
Rated Current
Maximum Current
10 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
RC1206
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Paper Taping Reel (R)
7" (178 mm)
10" (254 mm)
13" (330 mm)
5,000 units
10,000 units
20,000 units
NOTE
1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC1206 rated power at 70°C is 1/4 W
P
MLB206_2
(%P
rated
)
R
ATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
155
o
(
C)
T
amb
or max. working voltage whichever is less
Where
Fig. 4 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Jul 02, 2009 V.4
Product specification
6
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
IEC 60115-1 4.8
PROCEDURE
REQUIREMENTS
Refer to table 2
Temperature
Coefficient of
Resistance
(T.C.R.)
At +25/–55 °C and +25/+125 °C
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
IEC 60115-1 4.25.1
IEC 60068-2-2
Life/Endurance
At 70±5 °C for 1,000 hours, RCWV applied for
1.5 hours on, 0.5 hour off, still air required
±(1.0%+0.05 Ω) for 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
1,000 hours at 155±5 °C, unpowered
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
MIL-STD-202G Method-106G
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(0.5%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after test conclusion
MIL-STD-202G Method-107G
Thermal Shock
-55/+125 °C
±(0.5%+0.05 Ω) for 1% tol.
±(1%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
IEC60115-1 4.13
Short Time
Overload
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
www.yageo.com
Jul 02, 2009 V.4
Product specification
7
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60068-2-21
PROCEDURE
REQUIREMENTS
Board Flex/
Bending
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05 Ω) for 1%, 5% tol.
<50 mΩ for Jumper
2 mm bending
No visible damage
Bending time: 60±5 seconds
IEC 60068-2-1
Low
Temperature
Operation
The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C
±(0.5%+0.05 Ω) for 1% tol.
±(1.0%+0.05 Ω) for 5% tol.
No visible damage
This constitutes shall be repeated for 96 hours
However the applied voltage shall not exceed
the maximum operating voltage
IEC 60115-1 4.6
IEC 60115-1 4.7
Insulation
Resistance
Rated continuous overload voltage (RCOV)
for 1 minute
≥10 GΩ
RC1206
Type
Voltage (DC)
100 V
Dielectric
Withstand
Voltage
Maximum voltage (Vrms) applied for 1 minute
No breakdown or flashover
RC1206
Type
Voltage (AC)
500 Vrms
IPC/JEDEC J-STD-020D
IEC 60115-1 4.12
Resistance to
Solvent
lsopropylalcohol (C3H7OH) followed by
brushing
No smeared
Noise
Maximum voltage (Vrms) applied
Value
Resistors range
R < 100 Ω
10 dB
20 dB
30 dB
40 dB
46 dB
48 dB
100 Ω ≤ R < 1 KΩ
1 KΩ ≤ R < 10 KΩ
10 KΩ ≤ R < 100 KΩ
100 KΩ ≤ R < 1 MΩ
1 MΩ ≤ R ≤ 22 MΩ
IEC 60115-1 4.37
Biased Humidity
(steady state)
Steady state for 1000 hours at 40 °C / 95% R.H.
RCWV applied for 1.5 hours on and
0.5 hour off
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
www.yageo.com
Jul 02, 2009 V.4
Product specification
8
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60115-1 4.39
PROCEDURE
REQUIREMENTS
Intermittent
Overload
2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDEC J-STD-002B test B
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDEC J-STD-002B test D
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(0.5%+0.05 Ω) for 1% tol.
±(1.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Leadfree solder, 260 °C, 10 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
www.yageo.com
Jul 02, 2009 V.4
Product specification
9
9
SERIES
1206 (RoHS Compliant)
RC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 4
Jul 02, 2009
-
- Test Items and methods updated
- Test requirements upgraded
Version 3
Jul 15, 2008
-
- Change to dual brand datasheet that describe RC1206 with RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2
Sep 03, 2004
-
- New datasheet for 1206 thick film 1% and 5% with lead-free terminations
- Replace the 1206 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10,
and HRC01_5_4
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
- High ohmic products combined into standard products.
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jul 02, 2009 V.4
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Yageo:
RC1206FR-07105RL RC1206FR-0710K2L RC1206FR-0710ML RC1206FR-0711K5L RC1206FR-0711KL
RC1206FR-07121KL RC1206FR-07121RL RC1206FR-07124RL RC1206FR-0712K1L RC1206FR-0712K7L
RC1206FR-0712R1L RC1206FR-07130RL RC1206FR-0713K3L RC1206FR-0713K7L RC1206FR-0713KL
RC1206FR-07140KL RC1206FR-07140RL RC1206FR-07143KL RC1206FR-07147RL RC1206FR-0714K7L
RC1206FR-07150KL RC1206FR-07150RL RC1206FR-07154KL RC1206FR-0715K4L RC1206FR-0715K8L
RC1206FR-0715KL RC1206FR-0715RL RC1206FR-07162RL RC1206FR-07165RL RC1206FR-07169KL
RC1206FR-07169RL RC1206FR-0716K2L RC1206FR-0716R9L RC1206FR-0717K8L RC1206FR-0717R8L
RC1206FR-07182RL RC1206FR-0718K7L RC1206FR-0719K6L RC1206FR-071K21L RC1206FR-071K2L
RC1206FR-071K43L RC1206FR-071K4L RC1206FR-071K54L RC1206FR-071K5L RC1206FR-071K62L
RC1206FR-071K74L RC1206FR-071K78L RC1206FR-071M21L RC1206FR-071M62L RC1206FR-071ML
RC1206FR-071R33L RC1206FR-071R37L RC1206FR-071RL RC1206FR-07200KL RC1206FR-07200RL
RC1206FR-07205KL RC1206FR-07205RL RC1206FR-0720K5L RC1206FR-0720KL RC1206FR-0720R5L
RC1206FR-0720RL RC1206FR-07215KL RC1206FR-0721KL RC1206FR-0721R5L RC1206FR-07220RL
RC1206FR-07221KL RC1206FR-07221RL RC1206FR-07226RL RC1206FR-0722K1L RC1206FR-0722K6L
RC1206FR-0722KL RC1206FR-0722R1L RC1206FR-0722RL RC1206FR-07237KL RC1206FR-07237RL
RC1206FR-0723K7L RC1206FR-07243RL RC1206FR-07249KL RC1206FR-07249RL RC1206FR-0724K3L
RC1206FR-0724R3L RC1206FR-0724R9L RC1206FR-07255KL RC1206FR-0725K5L RC1206FR-07261KL
RC1206FR-07261RL RC1206FR-07267KL RC1206FR-0726K1L RC1206FR-0726K7L RC1206FR-0726R1L
RC1206FR-0726R7L RC1206FR-07274KL RC1206FR-0727K4L RC1206FR-0727R4L RC1206FR-0727RL
RC1206FR-07287KL RC1206FR-07294KL RC1206FR-072K05L RC1206FR-072K15L RC1206FR-072K1L
相关型号：
RC1206AA105KFKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 105000 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA118RFKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 118 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA150RFKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 150 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA17K8FKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 17800 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA20K5FKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 20500 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA249RFKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 249 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA316RFKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 316 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA49K9FKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 49900 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA54K9FKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 54900 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA732KFKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 732000 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AA82K5FKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 82500 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
RC1206AB1K00FKNT
RESISTOR, METAL GLAZE/THICK FILM, 0.3 W, 1 %, 100 ppm, 1000 ohm, SURFACE MOUNT, 1206, CHIP
VISHAY
©2020 ICPDF网 联系我们和版权申明