RE1206FRE0743RL [YAGEO]
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 43ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP;型号: | RE1206FRE0743RL |
厂家: | YAGEO CORPORATION |
描述: | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 43ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP |
文件: | 总7页 (文件大小:538K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
THICK FILM CHIP RESISTORS
Precision grade
RE series
0.1%, 0.5%, 1%, TC 50
sizes 0201/0402/0603/0805/1206
RoHS compliant & Halogen Free
Product specification
2
7
SERIES
0201 to 1206
RE
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RE0201 to RE1206 ultra precision
chip resistors with lead-free
terminations made by thick film
process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
GLOBAL PART NUMBER (PREFERRED)
RE XXXX X X X XX XXXX L
( )
( ) ( ) ( ) ( )
( )
6
( )
7
1
2
3
4
5
APPLICATIONS
Converters
( )
1 SIZE
Printer equipment
Server board
Telecom
0201 / 0402 / 0603 / 0805 / 1206
( )
2 TOLERANCE
B = ±0.1%
D = ±0.5%
F = ±1%
Consumer
FEATURES
Halogen Free Epoxy
( )
3 PACKAGING TYPE
R = Paper/PE taping reel
RoHS compliant
Reducing environmentally
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
hazardous wastes
E = ±50 ppm/°C
High component and equipment
reliability
( )
5 TAPING REEL
Non-forbidden material used in
products/production
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
Moisture sensitivity level: MSL 1
( )
6 RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Detailed resistance rules show in table of “Resistance rule of global part number”.
(7) DEFAULT CODE
Letter L is system default code for order only (Note)
ORDERING EXAMPLE
Resistance rule of global part
number
The ordering code of a RE0603
chip resistor, TC 50 value 56Ω with
±0.5% tolerance, supplied in 7-inch
tape reel is: RE0603DRE0756RL.
Resistance code rule
Example
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
NOTE
1. All our R-Chip products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 MΩ)
1M = 1,000,000 Ω
2. On customized label, "LFP" or specific
symbol can be printed
www.yageo.com
Jun. 01, 2017 V.6
Product specification
3
7
SERIES
0201 to 1206
RE
Chip Resistor Surface Mount
MARKING
RE0805 / RE1206
Either resistance in E-24 or E-96: 4 digits
00
First three digits for significant figure and 4th digit for number of zeros
Fig. 1 Value = 10 kΩ
RE0603
0
1%, 0.5%, 0.1% E24 exception values 10/11/13/15/20/75 of E24 series
Fig. 2 Value = 24 Ω
1%, 0.5%, 0.1% E96 refer to EIA-96 marking method, including values
10/11/13/15/20/75 of E24 series
Fig. 3 Value = 12.4 kΩ
RE0201/0402
No marking
Fig. 4
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistors are constructed out of a high-grade ceramic
body. Internal metal electrodes are added at each end and
connected by a resistive layer. The resistive layer is adjusted
to give the approximate required resistance and laser cutting
of this resistive layer that achieves tolerance trims the value.
The resistive layer is covered with a protective coat and
printed with the resistance value. Finally, the two external
terminations (matte tin) are added. See fig. 5.
OUTLINES
For dimension see Table 1
DIMENSION
Table 1 For outlines see fig. 5
TYPE
L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
RE0201
RE0402
RE0603
RE0805
RE1206
0.60 ±0.03 0.30 ±0.03 0.23 ±0.03 0.10 ±0.05 0.15 ±0.05
1.00 ±0.05 0.50 ±0.05 0.32 ±0.05 0.20 ±0.10 0.25 ±0.10
1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
Fig. 5 Chip resistor outlines
www.yageo.com
Jun. 01, 2017 V.6
Product specification
4
7
SERIES
0201 to 1206
RE
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
RESISTANCE
RANGE
MAXIMUM
WORKING
VOLTAGE
DIELECTRIC
WITHSTAND OVERLOAD
MAXIMUM
TEMPERATURE
COEFFICIENT OF
RESISTANCE
POWER
OPERATING
TEMPERATURE RANGE
TYPE
RATING
VOLTAGE
VOLTAGE
(E24/E96)
100 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
RE0201
RE0402
RE0603
RE0805
RE1206
–55 °C to +155 °C
–55 °C to +155 °C
–55 °C to +155 °C
–55 °C to +155 °C
–55 °C to +155 °C
1/20W
1/16 W
1/10 W
1/8 W
25 V
50 V
50 V
100 V
150 V
300 V
500 V
50 V
100 V
150 V
300 V
400 V
±50 ppm/°C
±50 ppm/°C
±50 ppm/°C
±50 ppm/°C
±50 ppm/°C
75 V
150 V
200 V
1/4 W
NOTE
The maximum working voltage that may be continuously applied to the resistor element, see “IEC publication 60115-8”
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL DIMENSION
RE0201
RE0402
RE0603
RE0805
RE1206
Paper/PE taping reel (R)
7" (178 mm)
10" (254 mm)
13" (330 mm)
10,000
20,000
50,000
10,000
20,000
50,000
5,000
10,000
20,000
5,000
10,000
20,000
5,000
10,000
20,000
NOTE
1. For Paper/PE tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION
POWER RATING
Each type rated power at 70°C:
RE0201=1/20W, RE0402=1/16W, RE0603=1/10W,
RE0805=1/8 W, RE1206=1/4W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
or max. working voltage whichever is less
Fig. 6 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
)
amb
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
P=Rated power (W)
R=Resistance value (Ω )
www.yageo.com
Jun. 01, 2017 V.6
Product specification
5
7
SERIES
0201 to 1206
RE
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
IEC 60115-1 4.25.1
Life/Endurance
At 70± 2 °C for 1,000 hours, RCWV applied for ±(3%+0.05 Ω)
1.5 hours on, 0.5 hour off, still air required
MIL-STD-202 Method 108A
IEC 60068-2-2
High
1,000 hours at 155±5 °C, unpowered
±(3%+0.05 Ω)
Temperature
Exposure
MIL-STD-202 Method 108A
MIL-STD-202 Method 106G
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(3%+0.05 Ω)
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
MIL-STD-202 Method 107G
Thermal Shock
-55/+125 °C
±(1%+0.05 Ω)
Number of cycles required is 300.
Devices mounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
IEC60115-1 4.13
IEC 60115-1 4.33
Short Time
Overload
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1%+0.05 Ω)
No visible damage
Board Flex/
Bending
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1%+0.05 Ω)
No visible damage
Bending: see table 5 for each size
Bending time: 60±5 seconds
www.yageo.com
Jun. 01, 2017 V.6
Product specification
6
7
SERIES
0201 to 1206
RE
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60115-1 4.24.2
PROCEDURE
REQUIREMENTS
±(3%+0.05 Ω )
Humidity
Steady state for 1000 hours at 40 °C / 95%
R.H. RCWV applied for 1.5 hours on and 0.5
hour off
Solderability
- Wetting
Electrical Test not required
Magnification 50X
Well tinned (≥95% covered)
No visible damage
J-STD-002 test B
SMD conditions:
1st step: method B, aging 4 hours at 155°C
dry heat
2nd step: leadfree solder bath at 245±3°C
Dipping time: 3±0.5 seconds
J-STD-002 test D
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
IEC 60115-1 4.18
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples.
Leadfree solder, 260 °C, 10 seconds
immersion time
±(1%+0.05 Ω)
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
Table 5 Bending for sizes 0201 to 1206
TYPE
RE0201
RE0402
RE0603
RE0805
RE1206
Specification (mm)
5
5
3
3
2
www.yageo.com
Jun. 01, 2017 V.6
Product specification
7
7
SERIES
0201 to 1206
RE
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 6
Version 5
Version 4
Version 3
Version 2
Version 1
May 31, 2017
Feb 24, 2017
May 03, 2016
Jan. 26, 2015
May 11, 2015
Jan 23, 2014
-
-
-
-
-
-
-Add 10" packing
-Delete 125℃ in derating curve
-Update 0201 resistor value
- Update Working Voltage
- Update test and requirements
- Add RE0201
- Add 0.1%
- Update TEST AND REQUIREMENTS, add Humidity test
Version 0
Dec 10, 2010
-
- New datasheet for thick film ultra precision chip resistors sizes of
0402/0603/0805/1206, 0.5%, 1%, TC50 with lead-free terminations
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jun. 01, 2017 V.6
相关型号:
RE1206FRE07470RL
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 470ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
RE1206FRE0747RL
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 47ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
RE1206FRE0756RL
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 56ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
RE1206FRE075K1L
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 5100ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
RE1206FRE07680KL
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 680000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
RE1206FRE07768RL
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 768ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
RE1206FRE07820RL
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 820ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206, CHIP
YAGEO
©2020 ICPDF网 联系我们和版权申明