RL2512FK-070R357H [YAGEO]
Fixed Resistor, Metal Glaze/thick Film, 1W, 0.357ohm, 1% +/-Tol, 600ppm/Cel, Surface Mount, 2512, CHIP, ROHS COMPLIANT;
| 型号： | RL2512FK-070R357H |
| 厂家： | 
YAGEO CORPORATION |
| 描述： | Fixed Resistor, Metal Glaze/thick Film, 1W, 0.357ohm, 1% +/-Tol, 600ppm/Cel, Surface Mount, 2512, CHIP, ROHS COMPLIANT |
| 文件： | 总9页 (文件大小：334K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LOW OHMIC CHIP RESISTORS
RL series
5%, 2%, 1%
sizes 0402/0603/0805/1206/
1210/1218/2010/2512
RoHS compliant
Product specification
2
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RL0402 to RL2512 low ohmic chip
resistors with lead-free terminations
made by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
GLOBAL PART NUMBER (PREFERRED)
RL XXXX X X X XX XXXX L
APPLICATIONS
ꢀ Converters
ꢀ Printer equipment
ꢀ Server board
ꢀ Telecom
( )
1
( ) ( ) ( ) ( )
( )
6
( )
7
2
3
4
5
( )
1 SIZE
0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
( )
2 TOLERANCE
ꢀ Consumer
F = ±1%
G = ±2%
J = ±5%
FEATURES
ꢀ RoHS compliant
( )
3 PACKAGING TYPE
- Products with lead free
terminations meet RoHS
requirements
R = Paper taping reel
K = Embossed taping reel
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
- Pb-glass contained in electrodes
– = Base on spec
- Resistor element and glass are
exempted by RoHS
( )
5 TAPING REEL
ꢀ Reducing environmentally
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
hazardous wastes
( )
6 RESISTANCE VALUE
ꢀ High component and equipment
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
reliability
ꢀ Saving of PCB space
Detailed resistance rules show in table of “Resistance rule of global part number”.
ꢀ None forbidden-materials used
in products/production
(7) OPTIONAL CODE
ꢀ Low resistances applied to
L = optional symbol (Note)
H = Halogen / Lead free (special code on request)
current sensing
ꢀ Halogen Free Epoxy
ORDERING EXAMPLE
Resistance rule of global part
number
The ordering code of a RL0603
chip resistor, value 0.56 X with
Resistance code rule
Example
±1% tolerance, supplied in 7-inch
tape reel is: RL0603FR-070R56 (L).
0R1 = 0.1 Ω
0R12 = 0.12 Ω
0R105 = 0.105 Ω
0RXXX
(1 to 976 mΩ)
NOTE
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
3. Comply Halogen Free Epoxy
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Dec 11, 2008 V.4
Product specification
3
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
Last digit of 12NC
2350 / 2390 / 2322 XXX XXXXX L
Resistance decade (3)
Last digit
( )
4
(1)
(2)
(3)
EMBOSSED (2) PAPER/PE (2)
TAPE ON REEL TAPE ON REEL (units)
0
7
8
9
1
2
3
4
5
6
X
0.01 to 0.0976
START TOL. RESISTANCE
IN (1) (%) RANGE
SIZE TYPE
X
0.1 to 0.976
4,000
5,000
10,000
X
1 to 9.76
0402 LRC31
LRC32
2350 ±5% 0.05 to 1 Ω
2350 ±1% 0.05 to 1 Ω
2350 ±5% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
2350 ±5% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
2350 ±5% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
-
-
-
-
-
-
-
-
-
513 20xxx
X
10 to 97.6
100 to 976
1 to 9.76 k
-
513 22xxx
X
0603 LRC21
LRC22
512 10xxx
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
X
512 12xxx
X
10 to 97.6 k
0805 LRC11
LRC12
511 10xxx
X
100 to 976 k
511 12xxx
X
1 to 9.76 M
1206 LRC01
LRC02
510 10xxx
X
10 to 97.6 M
510 12xxx
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
1210 LPRC101
LPRC101
2390 ±5% 0.01 to 0.0976 Ω -
735 90xxx
X
0.3
2390 ±5% 0.1 to 1 Ω
2390 ±1% 0.01 to 1 Ω
2322 ±5% 0.01 to 1 Ω
2322 ±1% 0.01 to 1 Ω
-
735 60xxx
X
1
LPRC102
-
735 3xxxx
X
33 k
1218 LPRC201
LPRC201
735 64xxx
735 7xxxx
-
-
-
-
-
-
-
-
-
-
X
10 M
ORDERING EXAMPLE
2010 LPRC111
LPRC111
2322 ±5% 0.01 to 0.0976 Ω 760 90xxx
2322 ±5% 0.1 to 1 Ω 760 60xxx
2322 ±1% 0.01 to 0.0976 Ω 761 90xxx
The ordering code of a RL0603 chip
resistor, value 0.56 X with ±1%
tolerance, supplied in tape of 5,000
units per reel is: 2350512125609(L)
or RL0603FR-070R56(L).
LPRC111
LPRC111
2322 ±1% 0.1 to 1 Ω
761 6xxxx
2322 ±5% 0.01 to 0.0976 Ω 762 90xxx
2322 ±5% 0.1 to 1 Ω 762 60xxx
2322 ±1% 0.01 to 0.0976 Ω 763 90xxx
2512 LPRC221
LPRC221
NOTE
LPRC221
1. All our RSMD products are RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
LPRC221
2322 ±1% 0.1 to 1 Ω
763 6xxxx
(1) The resistors have a 12-digit ordering code starting with
2350/2390/2322.
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging.
(In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape
reel is requested in Global part number ordering code.)
3. Comply Halogen Free Epoxy
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of “Last digit
of 12NC”.
(4) "L" is optional symbol (Note)
.
"H" is Halogen / Lead free (special code on request).
www.yageo.com
Dec 11, 2008 V.4
Product specification
4
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
MARKING
RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512
E-24 series / Non-series (R= 25/40/50/60/250/400/500 mΩ): 4 digits
020
YNSC005
The “R” is used as a decimal point; the other 3 digits are significant.
Fig. 1 Value = 20 mΩ
RL0603: R≥100 m IN E-24 SERIES, R = 10/20/30/40/50/60 m
Ω
X
3 digits
YNSC006
The “R” is used as a decimal point; the other 2 digits are significant.
Fig. 2 Value = 22 mΩ
RL0402 / RL0603: R<100 m EXCEPT 10/20/30/40/50/60 m
Ω
X
No marking
ynsc007
Fig. 3
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistors are constructed out of a high-grade ceramic
body. Internal metal electrodes are added at each end and
connected by a resistive paste. The composition of the
paste is adjusted to give the approximate required
resistance and laser cutting of this resistive layer that
achieves tolerance trims the value. The resistive layer is
covered with a protective coat and printed with the
resistance value. Finally, the two external terminations
(matte tin) are added. See fig. 4.
OUTLINES
For dimension see Table 1
marking layer
protective coat
resistive layer
inner electrode
H
termination (Ni/matte tin)
ceramic substrate
I
2
I
DIMENSIONS
1
Table 1 For outlines see fig. 4
TYPE
L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20
3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25
5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
W
RL0402
RL0603
RL0805
RL1206
RL1210
RL1218
RL2010
RL2512
YNSC064
L
Fig. 4 Chip resistor outlines
www.yageo.com
Dec 11, 2008 V.4
Product specification
5
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
TYPE / RESISTANCE
RANGE
TEMPERATURE COEFFICIENT
OF RESISTANCE
X
X
50m ≤R<1
RL0402
RL0603
50mΩ≤R<1Ω
10mΩ≤R<1Ω
±800 ppm/°C
X
X
X
X
X
X
X
X
10m ≤R≤36m
36m <R≤91m
91m <R≤500m
500m <R<1
±1,500 ppm/°C
±1,200 ppm/°C
±800 ppm/°C
±300 ppm/°C
X
X
X
X
X
X
X
X
X
X
X
X
10m ≤R≤18m 18m <R≤47m
47m <R≤91m
91m <R≤360m 360m <R≤500m
500m <R<1
RL0805
RL1206
RL1210
RL2010
RL2512
±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C
±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C
±600 ppm/°C
±600 ppm/°C
±600 ppm/°C
±600 ppm/°C
±600 ppm/°C
±300 ppm/°C
±300 ppm/°C
±300 ppm/°C
±300 ppm/°C
±300 ppm/°C
±200 ppm/°C
±200 ppm/°C
±200 ppm/°C
±200 ppm/°C
±200 ppm/°C
10mΩ≤R<1Ω
10mΩ≤R<1Ω
±1,500 ppm/°C ±1,000 ppm/°C
±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C
±1,500 ppm/°C ±1,200 ppm/°C ±800 ppm/°C
±800 ppm/°C
X
X
X
X
X
X
X
X
10m ≤R≤30m
30m <R≤56m
56m <R≤180m
180m <R<1
RL1218
±2,000 ppm/°C
±1,000 ppm/°C
±700 ppm/°C
±250 ppm/°C
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL DIMENSION RL0402 RL0603 RL0805 RL1206 RL1210 RL1218 RL2010 RL2512
Paper taping reel (R)
7" (178 mm)
10" (254 mm)
13" (330 mm)
7" (178 mm)
10,000
20,000
50,000
---
5,000
10,000
20,000
---
5,000
10,000
20,000
---
5,000
10,000
20,000
---
5,000
10,000
20,000
---
---
---
---
---
---
---
---
---
---
Embossed taping reel (K)
4,000
4,000
4,000
NOTE
1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
www.yageo.com
Dec 11, 2008 V.4
Product specification
6
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
FUNCTIONAL DESCRIPTION
OPERATINGTEMPERATURE RANGE
handbook, halfpage
Range: –55 °C to +125 °C
MLB206_1
P
POWER RATING
(%P
rated
)
100
50
0
Each type rated power at 70 °C:
RL0402=1/16 W; RL0603=1/10 W; RL0805=1/8 W;
RL1206=1/4 W; RL1210=1/2 W; RL1218=1 W;
RL2010=3/4 W; RL2512=1 W.
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
55
0
50 70
100
125
( C)
o
T
amb
Fig. 5 Maximum dissipation (P ) in percentage of rated power
max
as a function of the operating ambient temperature (T
)
amb
(
)
V = √ P X R
Where
(
)
( )
V = Continuous rated DC or AC rms working voltage V
(
)
P = Rated power W
( )
R = Resistance value X
www.yageo.com
Dec 11, 2008 V.4
Product specification
7
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
MIL-STD-202G-method 108A
IEC 60115-1 4.25.1
JIS C 5202-7.10
Life/
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±2%
Operational Life/
Endurance
MIL-STD-202G-method 108A
IEC 60115-1 4.25.3
High
Temperature
Exposure/
Endurance at
upper category
temperature
1,000 hours at maximum operating temperature
depending on specification, unpowered
±1%
No direct impingement of forced air to the parts
Tolerances: 125±3 °C
JIS C 5202-7.11
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
±2%
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
MIL-STD-202G-method 107G
Thermal Shock
-55/+125 °C
±1%
Note: Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
MIL-R-55342D-para 4.7.5
IEC60115-1 4.13
Short time
overload
2.5 times RCWV or maximum overload voltage
whichever is less for 5 sec at room temperature
±2%
No visible damage
IEC60115-1 4.33
Board Flex/
Bending
Device mounted on PCB test board as described, ±1%
only 1 board bending required
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Dec 11, 2008 V.4
Product specification
8
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Well tinned (≥95% covered)
No visible damage
IPC/JEDECJ-STD-002B test B
IEC 60068-2-58
Electrical Test not required
Magnification 50X
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDECJ-STD-002B test D
IEC 60068-2-58
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
MIL-STD-202G-method 210F
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples.
±1%
Leadfree solder, 270 °C, 10 seconds
immersion time
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Dec 11, 2008 V.4
Product specification
9
9
SERIES
0402 to 2512 (RoHS Compliant)
RL
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
- Halogen Free Epoxy
Version 4
Dec 11, 2008
-
- Update global part number definition
- Change to dual brand datasheet that describe RL0402 to RL2512 with
RoHS compliant
Version 3
Aug 07, 2008
-
- Define global part number
Version 2
Version 1
Jul 15, 2005
-
-
- Ordering example revised
Apr 15, 2005
- Size 1218 extended
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
Version 0
Nov. 10, 2003
-
- First issue of this specification
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Dec 11, 2008 V.4
相关型号：
RL2512FK-070R39L
Fixed Resistor, Metal Glaze/thick Film, 1W, 0.39ohm, 1% +/-Tol, 300ppm/Cel, Surface Mount, 2512, CHIP, LEAD FREE
YAGEO
RL2512FK-070R47L
Fixed Resistor, Metal Glaze/thick Film, 1W, 0.47ohm, 1% +/-Tol, 300ppm/Cel, Surface Mount, 2512, CHIP, LEAD FREE
YAGEO
RL2512FK-070R51L
Fixed Resistor, Metal Glaze/thick Film, 1W, 0.51ohm, 1% +/-Tol, 200ppm/Cel, Surface Mount, 2512, CHIP, LEAD FREE
YAGEO
RL2512FK-070R56L
Fixed Resistor, Metal Glaze/thick Film, 1W, 0.56ohm, 1% +/-Tol, 200ppm/Cel, Surface Mount, 2512, CHIP, LEAD FREE
YAGEO
RL2512FK-070R5L
Fixed Resistor, Metal Glaze/thick Film, 1W, 0.5ohm, 1% +/-Tol, 300ppm/Cel, Surface Mount, 2512, CHIP, ROHS COMPLIANT
YAGEO
©2020 ICPDF网 联系我们和版权申明