YC124-JR-0756RL [YAGEO]
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 56ohm, 25V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP;
| 型号： | YC124-JR-0756RL |
| 厂家： | 
YAGEO CORPORATION |
| 描述： | Array/Network Resistor, Isolated, Metal Glaze/thick Film, 56ohm, 25V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP 电阻器 |
| 文件： | 总12页 (文件大小：644K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ARRAY CHIP RESISTORS
YC/TC
5%, 1%
sizes
YC:102/104/122/124/162/164/248/324/158/358
TC: 122/124/164
RoHS compliant
Product specification
2
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
YC (convex) and TC (concave) series
chip resistor arrays with lead-free
terminations made by thick film
process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
YC
TC
XXX – X X X XX XXXX L
(1)
(2) (3) (4) (5)
(6)
(7)
APPLICATIONS
Terminal for SDRAM and
(1) SIZE
YC:102/104/122/124/162/164/248/324/158/358
TC: 122/124/164
DDRAM
Computer applications: laptop
computer, desktop computer
(2)
TOLERANCE
Consume electronic equipments:
PDAs, PNDs
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
Mobile phone, telecom…
( )
3 PACKAGING TYPE
R = Paper taping reel
K = Embossed plastic tape reel
FEATURES
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
More efficient in pick & place
– = Base on spec
application
( )
5 TAPING REEL
Low assembly costs
RoHS compliant
07 = 7 inch dia. Reel
13 = 13 inch dia. Reel
Products with lead free
terminations meet RoHS
requirements
( )
6 RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point.
Pb-glass contained in
electrodes
Detailed resistance rules show in table of “Resistance rule of global part number”.
(7) DEFAULT CODE
Resistor element and glass
Letter L is the system default code for ordering only. (Note)
are exempted by RoHS
Reducing environmentally
hazardous wastes
High component and equipment
reliability
Saving of PCB space
Resistance rule of global part
number
ORDERING EXAMPLE
None forbidden-materials used
in products/production
The ordering code of a YC122
Resistance code rule
Example
convex chip resistor array, value
1,000 Ω with ±5% tolerance,
supplied in 7-inch tape reel is:
YC122-JR-071KL.
0R
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
XXRX
10R = 10 Ω
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
XKXX
1K = 1,000 Ω
(1 to 9.76 KΩ)
9K76 = 9760 Ω
XM
1M = 1,000,000 Ω
(1 MΩ)
www.yageo.com
Nov. 14, 2014 V.0
Product specification
3
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
TC122 series is supplied and ordered by global part number only.
12NC CODE
2350
(1)
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
Last digit
( )
(2)
(3)
4
PAPER / PE TAPE ON REEL (units) (2)
0
7
8
9
1
2
3
4
5
6
0.01 to 0.0976 Ω
0.1 to 0.976 Ω
TYPE/ START TOL. RESISTANCE
2×0402 IN (1)
(%) RANGE
10,000
50,000
013 12xxx
013 3xxxx
-
1 to 9.76 Ω
ARV321
ARV322 2350
Jumper
2350
±5% 1 to 1 MΩ
±1% 10 to 1 MΩ
013 11xxx
013 2xxxx
013 91001
10 to 97.6 Ω
100 to 976 Ω
1 to 9.76 KΩ
10 to 97.6 KΩ
100 to 976 KΩ
1 to 9.76 MΩ
10 to 97.6 MΩ
2350
-
0 Ω
(1) The resistors have a 12-digit ordering code starting with 2350.
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
Example:
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
0.02 Ω
(4) "L" is optional symbol (Note)
.
0.3 Ω
1 Ω
ORDERING EXAMPLE
33 KΩ
10 MΩ
The ordering code of a ARV321 resistor, value 1,000Ω with ±5%
tolerance, supplied in tape of 10,000 units per reel is: 235001311102(L)
or YC122-JR-071KL.
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
www.yageo.com
Nov. 14, 2014 V.0
Product specification
4
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
MARKING
YC102/122
No marking
Fig. 1
YC104
No marking
Fig. 2
YC124/164/324
1-Digit marking
Fig. 3 Jumper=0Ω
E-24 series: 3 digits
First two digits for significant figure and 3rd digit for number of zeros
Fig. 3-1 Value=240KΩ
YC248
1-Digit marking
Fig. 4 Jumper=0Ω
E-24 series: 3 digits
First two digits for significant figure and 3rd digit for number of zeros
Fig. 4-1 Value=240KΩ
YC158/358
E-24 series: 3 digits
First two digits for significant figure and 3rd
digit for number of zeros
Fig. 5 Value=24KΩ
Fig. 5-1 Value=240KΩ
TC122
No marking
Fig. 6
TC124
No marking
Fig. 7
www.yageo.com
Nov. 14, 2014 V.0
Product specification
5
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
TC164
1-Digit marking
Fig. 8 Jumper=0Ω
E-24 series: 3 digits
First two digits for significant figure and 3rd digit for number of zeros
Fig. 8-1 Value=240KΩ
For further marking information, please refer to data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
OUTLINES
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
Fig. 9 Chip resistor outlines
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Ni-
barrier) are added as shown in Fig.9.
www.yageo.com
Nov. 14, 2014 V.0
Product specification
6
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
SCHEMATIC
Fig. 11 Equivalent circuit diagram
Note: 1. YC104 is flat type
Table 1
For dimension, please refer to Fig. 4 and Table 1
Fig. 10 YC/TC122 series chip resistors dimension
Note: 1. YC104 is flat type
www.yageo.com
Nov. 14, 2014 V.0
Product specification
7
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
DIMENSIONS
Table 1
TYPE
H / H1
B
0.20 ±0.10
0.15 ±0.05
0.20 ±0.10
P
L
T
0.35 ±0.10
0.35 ±0.10
0.30 ±0.10
W1
W2
YC102
YC104
YC122
H: 0.35 ±0.10
H: 0.20 ±0.10
H: 0.21 +0.10/-0.05
H: 0.45 ±0.05
H1: 0.30 ±0.05
H: 0.30 ±0.10
H: 0.65 ±0.05
H1: 0.50 ±0.15
H: 0.45 ±0.05
H1: 0.30 ±0.05
H: 1.10 ±0.15
H1: 0.90 ±0.15
H : 0.30 ±0.05
H : 0.30 ±0.10
H: 0.60 ±0.15
H: 0.45±0.05
H: 1.10±0.15
H1: 0.90±0.15
0.50 ±0.05
0.40 ±0.10
0.67 ±0.05
0.80 ±0.10
0.15 ±0.10
0.15 ±0.10
0.25 ±0.10
0.60 ±0.10
0.60 ±0.10
1.00 ±0.10
1.40 ±0.10
1.00 ±0.10
YC124
YC162
YC164
0.20 ±0.15
0.30 ±0.10
0.30 ±0.15
0.50 ±0.05
0.80 ±0.05
0.80 ±0.05
2.00 ±0.10
1.60 ±0.10
3.20 ±0.15
0.45 ±0.10
0.40 ±0.10
0.60 ±0.10
0.30 ±0.15
0.30 ±0.10
0.30 ±0.15
1.00 ±0.10
1.60 ±0.10
1.60 ±0.15
YC248
YC324
0.30 ±0.15
0.50 ±0.20
0.50 ±0.05
1.27 ±0.05
4.00 ±0.20
5.08 ±0.20
0.45 ±0.10
0.60 ±0.10
0.40 ±0.15
0.50 ±0.15
1.60 ±0.15
3.20 ±0.20
TC122
TC124
TC164
YC158
0.25 ±0.15
0.20 ±0.10
0.30 ±0.15
0.30 ±0.15
0.50 ±0.05
0.50 ±0.05
0.80 ±0.05
0.64 ±0.05
1.00 ±0.10
2.00 ±0.10
3.20 ±0.15
3.20 ±0.20
0.30 ±0.10
0.40 ±0.10
0.60 ±0.10
0.60 ±0.10
0.25 ±0.15
0.25 ±0.10
0.30 ±0.15
0.35 ±0.15
1.00 ±0.10
1.00 ±0.10
1.60 ±0.15
1.60 ±0.15
YC358
0.50 ±0.15
1.27 ±0.05
6.40 ±0.20
0.60 ±0.10
0.50 ±0.15
3.20 ±0.20
www.yageo.com
Nov. 14, 2014 V.0
Product specification
8
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
POWER
P70
Jumper criteria
(unit: A)
TYPE
OPERATING
TEMP. RANGE
MWV RCOV DWV
RESISTANCE RANGE &
TOLERANCE
T. C. R.
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 0.5
Max. current 1.0
YC102
YC104
YC122
YC124
YC162
YC164
1/32W
1/32W
1/16W
1/16W
1/16W
1/16W
-55°C to +125°C
-55°C to +125°C
-55°C to +125°C
-55°C to +155°C
-55°C to +125°C
-55°C to +155°C
15V
12.5V
50V
30V
25V
30V
25V
±200 ppm/°C
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 0.5
Max. current 1.0
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 0.5
Max. current 1.0
100V
50V
100V
100V
100V
100V
1Ω ≤ R ≤ 10Ω
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
±250 ppm/°C Rated current 1.0
10Ω ≤ R ≤ 1MΩ Max. current 2.0
±200 ppm/°C
25V
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E/24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 2.0
50V
100V
100V
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 2.0
50V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 2.0
Max. current 10.0
YC248
YC324
TC122
1/16W
1/8W
-55°C to +155°C
-55°C to +155°C
-55°C to +125°C
50V
200V
50V
100V
500V
100V
100V
500V
100V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
--- ---
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 1.5
1/16W
±200 ppm/°C
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 1.5
TC124
TC164
1/16W
1/16W
-55°C to +125°C
-55°C to +155°C
50V
50V
100V
100V
100V
100V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 2.0
10Ω ≤ R ≤
E24 ±5%
YC158
YC358
1/16W
1/16W
-55°C to +155°C
-55°C to +155°C
25V
50V
50V
50V
--- ---
--- ---
100KΩ
10Ω ≤ R ≤
E24 ±5%
100V
100V
330KΩ
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
YC102 YC/TC YC/TC YC162 YC/TC YC248 YC324 YC158 YC358
PACKING STYLE
PACKING STYLE
/104
10,000
---
122
10,000
50,000
124
10,000
40,000
164
7" (178mm)
5,000
---
5,000
5,000
---
---
---
5,000
---
---
Paper taping reel ( R )
13" (254mm)
20,000
20,000
7" (178mm)
---
---
---
---
---
4,000
4,000
---
4,000
Embossed taping reel ( K)
NOTE
1. For tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”.
www.yageo.com
Nov. 14, 2014 V.0
Product specification
9
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
YC102/104/122/162, TC122/124 Range:
-55℃ to +125℃ (Fig.12)
YC124/164/248/324/158/358, TC164 Range:
-55℃ to +155℃(Fig.13)
POWER RATING
Each type rated power at 70℃
YC102/104 = 1/32 W
YC122/124/162/164/248/158/358 = 1/16 W
YC324 = 1/8 W
Fig. 12 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
TC122/124/164 = 1/16 W
)
amb
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V= (PxR)
or max. working voltage whichever is less
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
P=Rated power (W)
Fig. 13 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
)
amb
R=Resistance value (Ω )
www.yageo.com
Nov. 14, 2014 V.0
Product specification
10
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Life/
Operational Life/
Endurance
MIL-STD-202G-method 108A
IEC 60115-1 4.25.1
JIS C 5202-7.10
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2%+0.05 Ω)
<100 mΩ for Jumper
High Temperature
Exposure/
Endurance at
Upper Category
Temperature
MIL-STD-202G-method 108A
IEC 60115-1 4.25.3
1,000 hours at maximum operating
temperature depending on specification,
unpowered
±(1%+0.05 Ω)
<50 mΩ for Jumper
JIS C 5202-7.11
No direct impingement of forced air to the
parts
Tolerances: 125±3 °C
Moisture
Resistance
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
Each temperature / humidity cycle is defined at ±(2%+0.05 Ω)
8 hours (method 106F), 3 cycles / 24 hours for
<100 mΩ for Jumper
10d with 25 °C / 65 °C 95% R.H, without
steps 7a & 7b, unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
Thermal Shock
MIL-STD-202G-method 107G
-55/+125 °C
±(1%+0.05 Ω)
Note: Number of cycles required is 300.
Devices unmounted
<50 mΩ for Jumper
Maximum transfer time is 20 seconds. Dwell
time is 15 minutes. Air – Air
Short Time
Overload
MIL-R-55342D-para 4.7.5
IEC60115-1 4.13
2.5 times RCWV or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(2%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
Board Flex/
Bending
IEC60115-1 4.33
Device mounted on PCB test board as
described, only 1 board bending required
±(1%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Nov. 14, 2014 V.0
Product specification
11
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
IPC/JEDECJ-STD-002B test B
IEC 60068-2-58
Well tinned (≥95% covered)
No visible damage
Electrical Test not required
Magnification 50X
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
- Leaching
IPC/JEDECJ-STD-002B test D
IEC 60068-2-58
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
- Resistance to
Soldering Heat
MIL-STD-202G-method 210F
IEC 60068-2-58
Condition B, no pre-heat of samples
±(1%+0.05 Ω)
Leadfree solder, 270 °C, 10 seconds
immersion time
<50 mΩ for Jumper
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Nov. 14, 2014 V.0
Product specification
12
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
- - First issue of this specification
Version 0
Nov. 14, 2014
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Nov. 14, 2014 V.0
相关型号：
YC124-JR-07620K
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 620000ohm, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP
YAGEO
YC124-JR-07620R
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 620ohm, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP
YAGEO
YC124-JR-0768KL
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 68000ohm, 25V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP
YAGEO
YC124-JR-0768R0L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP, LEAD FREE
YAGEO
YC124-JR-0768RL
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 68ohm, 25V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP, ROHS COMPLIANT
YAGEO
©2020 ICPDF网 联系我们和版权申明