V585ME61 [ZCOMM]
VOLTAGE CONTROLLED OSCILLATOR; 压控振荡器
| 型号： | V585ME61 |
| 厂家： | 
Z-COMMUNICATIONS, INC |
| 描述： | VOLTAGE CONTROLLED OSCILLATOR |
| 文件： | 总2页 (文件大小：46K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
V585ME61
9939 Via Pasar • San Diego, CA 92126
TEL (858) 621-2700 FAX (858) 621-2722
VOLTAGE CONTROLLED OSCILLATOR
Rev A1
PHASE NOISE (1 Hz BW, typical)
-50
-60
-70
-80
-90
-100
-110
-120
-130
-140
FEATURES
• Frequency Range: 1100 -
• Tuning Voltage:
MHz
1200
4.75-7.5 Vdc
• MINI-16-L - Style Package
APPLICATIONS
• Satellite Communications
• Test Instrumentation
Earthstations
1 E+3
10 E+3
100 E+3
OFFSET (Hz)
VALUE
•
UNITS
PERFORMANCE SPECIFICATIONS
Oscillation Frequency Range
Phase Noise @ 10 kHz offset (1 Hz BW, typ.)
Harmonic Suppression (2nd, typ.)
Tuning Voltage
-
1100 1200
MHz
dBc/Hz
dBc
-92
-8
4.75-7.5
72
Vdc
Tuning Sensitivity (avg.)
MHz/V
Power Output
13.5±2.5
50
dBm
Load Impedance
Input Capacitance (max.)
500
p
Pushing
<1
Mz/V
MHz
°C
Pulling (14 dB Return Loss, Any Phase)
<1
Operating Temperature Range
Package Style
-40 to 85
MINI-16-L
POWER SUPPLY REQUIREMENTS
Supply Voltage (Vcc, nom.)
Supply Current (Icc, typ.)
5
Vdc
mA
62
All specifications are typical unless otherwise noted and subject to change without notice.
APPLICATION NOTES
• AN-100/1 : Mounting and Grounding of VCOs
• AN-102 : Proper Output Loading of VCOs
• AN-107 : How to Solder Z-COMM VCOs
NOTES:
© Z-Communications, Inc.
Page 1
All rights reserved
LOW COST - HIGH PERFORMANCE
VOLTAGE CONTROLLED OSCILLATOR
V585ME61
PAGE 2
TUNING CURVE, typ.
1300
1200
1100
1000
900
85 °c
°c
25
-40 °c
800
700
600
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
TUNING VOLTAGE (Vdc)
POWER CURVE, typ.
16
15
14
13
12
11
10
°c
25
683
772
862
946
1026
1101
1174
1243
FREQUENCY (MHz)
PHYSICAL DIMENSIONS
TYPICAL OF ALL PADS
SEE NOTE 3
MINI-16-L
415-0061 REV. D
(DRAWING NOT TO SCALE)
.070
.037
NOTES:
1. THE INSIDE RADIUS OF ALL 16 HALF HOLES
AT THE PERIMETER OF THE BOARD ARE
PLATED TO PROVIDE A SURFACE FOR THE
ATTACHMENT OF THE VCO TO A PCB,
.031
.026
.052
.114
IN 13 LOCATIONS, WITH 3 PADS BEING
USED FOR ELECTROMECHANICAL INTERFACE.
16 SOLDER LOCATIONS REQUIRED.
2. THE SURFACE OF THE SHIELD IS TIN PLATED
AND MAY BE SOLDERED TO. THE SHIELD'S
BASE METAL IS COLD ROLLED STEEL.
3. THE GROUND PLANE IS GROUND AND ATTACHES
TO A GROUND TRACK ON THE UPPER SIDE OF
THE BOARD AS WELL AS THE SHIELD BY PTH.
4. UNLESS OTHERWISE NOTED ALL DIMENSIONS
ARE IN INCHES.
TABS RANGE:
SEE NOTE 5.
(4 PLACES)
0.500
0.475
DETAIL A
P2
0.415
0.315
0.405
0.305
0.205
0.105
P1=VT
P2=RF OUT
P3=Vcc
P3
5. UNLESS OTHERWISE NOTED ALL TOLERANCES
ARE AS FOLLOWS:
0.215
0.115
TOLERANCES
BOTTOM VIEW
.XXX= ± .010
.130
SEE DETAIL 'A'
P1
.070 TYP
0.025
0.000
.034
0.000
.150
TYP
GROUND PLANE SOLDER PLATED
Page 2
© Z-Communications, Inc.
Printed in the U.S.A.
相关型号：
©2020 ICPDF网 联系我们和版权申明