AZ2501P1-1A-12D [ZETTLER]
50 AMP LATCHING POWER RELAY;型号: | AZ2501P1-1A-12D |
厂家: | ZETTLER ELECTRONICS |
描述: | 50 AMP LATCHING POWER RELAY PC 继电器 |
文件: | 总3页 (文件大小:74K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AZ2501P
50 AMP LATCHING
POWER RELAY
FEATURES
• 50 Amp switching
• Heavy loads to 13850 VA
• 4 kV dielectric strength
• 8 mm creepage distance
• Manual switch available
• Epoxy sealed version available
• UL, CUR file E44211
GENERAL DATA
CONTACTS
Arrangement
SPDT (1 Form C),
SPST (1 Form A)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 50 A 250 VAC Res. (SPST)
Ratings
Resistive load:
Set and Reset
Pulse Duration
Max. switched power: 13850 VA
Max. switched current: 50 A
Max. switched voltage: 440 VAC
50 ms minimum at nominal coil voltage
15 ms at nominal coil voltage
15 ms at nominal coil voltage
4000 Vrms coil to contact
Set Time (typical)
Reset Time (typical)
Dielectric Strength
Rated Load
UL, CUR
1 Form A (SPST)
50 A at 277 VAC, resistive, 70°C, 100k cycles
20 A at 347 VAC, resistive, 70°C, 30k cycles
5000 W at 240 VAC, tungsten, 40°C, 30k cycles
120 LRA / 20 FLA, at 120 VAC, 40°C, 30k cycles
102 LRA / 17 FLA, at 240 VAC, 40°C, 30k cycles
84 LRA / 14 FLA, at 277 VAC, 40°C, 30k cycles
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Creepage Distance
8 mm (1 Form A), 6 mm (1 Form C)
1 Form C (SPDT)
40 A at 277 VAC, general use, 70°C, 30k cycles
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 70°C (158°F)
Vibration
1.5mm DA at 10–55 Hz
Material
Silver tin oxide
Shock
Resistance
< 50 milliohms initially
(at rated current, voltage drop method)
Operating
10 g, 11 ms, 1/ sine (no false operation)
2
Non-Operating 100 g, 11 ms, 1/ sine (no damage)
2
COIL
Enclosure
P.B.T. polyester
Tinned copper alloy
270°C (518°F)
5 seconds
Power
Terminals
At Pickup Voltage
(typical)
.96 W single coil
1.9 W dual coil
Max. Solder Temp.
Max. Solder Time
Weight
Temperature
Max. 105°C (221°F)
32 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Initial state of contacts may be changed during transportation or shock!
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2501P
RELAY ORDERING DATA
COIL SPECIFICATIONS - STANDARD SINGLE COIL
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC [1]
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
AZ2501P1-1A-6D
AZ2501P1-1A-9D
AZ2501P1-1A-12D
AZ2501P1-1A-24D
AZ2501P1-1A-48D
AZ2501P1-1C-6D
AZ2501P1-1C-9D
AZ2501P1-1C-12D
AZ2501P1-1C-24D
AZ2501P1-1C-48D
6
9
4.8
7.2
7.8
11.7
15.6
31.2
62.4
24
54
12
24
48
9.6
96
19.2
38.4
384
1536
COIL SPECIFICATIONS - STANDARD DUAL COIL
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC [1]
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
AZ2501P2-1A-6D
AZ2501P2-1A-9D
AZ2501P2-1A-12D
AZ2501P2-1A-24D
AZ2501P2-1A-48D
AZ2501P2-1C-6D
AZ2501P2-1C-9D
AZ2501P2-1C-12D
AZ2501P2-1C-24D
AZ2501P2-1C-48D
6
9
4.8
7.2
7.8
11.7
15.6
31.2
62.4
12
27
12
24
48
9.6
48
19.2
38.4
192
768
* For epoxy sealed version (not allowed with manual switch) add suffix “E”.
For manual switch add suffix “W”.
For PCB retaining stud add suffix “K”.
For reverse polarity coil add suffix “R”.
NOTE: [1] Max. continuous voltage should not be applied for more then 60 seconds.
MECHANICAL DATA
PC BOARD LAYOUT
Suffix “W” only
.376
[9.6]
1.083
[27.5]
.601MAX
[15.3]
1.547MAX
[39.3]
.472
[12.0]
0.177
[4.5]
3x
.041
[1.04]
.266
[6.8]
.167
[4.3]
.118
[3.0]
2
5
3
1.201MAX
[30.5]
6
4
1
3x
.078
[1.98]
.205
[5.2]
.143
[3.63]
Suffix “K” only
.083
[2.1]
Viewed toward terminals
.376
[9.6]
1.083
[27.5]
.472
.295
[7.5]
.132
[3.35]
[12.0]
.024
.094
[2.4]
[0.60]
.266
[6.8]
.167
[4.3]
.031
[0.8]
2
5
3
4
.394
[10.0]
Terminal 5 omitted (single coil)
6
1
.024
[0.60]
.059
[1.5]
.094
[2.4]
Suffix “K” only
Terminal 6 omitted (form A)
.063
[1.6]
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
AZ2501P
WIRING DIAGRAMS
4
4
4
4
3
3
3
3
6
6
1
2
2
1
2
2
1
5
1 5
SPST&Single Coil
SPDT&Single Coil
SPST&Double Coil
SPDT&Double Coil
NOTE:
Standard Polarity type:
1. “Single Coil Latching Version”
(1) After energizing 1 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 2 (+) and 1 (-), 50ms pulse, terminal 3 and 4 is disconnected.
2. “Double Coil Latching Version”
(1) After energizing 5 (+) and 1 (-), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 5 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is disconnected.
Reverse Polarity type:
1. “Single Coil Latching Version”
(1) After energizing 1 (-) and 2 (+), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 1 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is disconnected.
2. “Double Coil Latching Version”
(1) After energizing 5 (-) and 1 (+), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 5 (-) and 2 (+), 50ms pulse, terminal 3 and 4 is disconnected.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
相关型号:
AZ2501P1-1A-12DEK
Power/Signal Relay, 1 Form A, SPST, 15.6VDC (Coil), DC Input, Random, AC Output
AZETTLER
AZ2501P1-1A-12DK
Power/Signal Relay, 1 Form A, SPST, 15.6VDC (Coil), DC Input, Random, AC Output
AZETTLER
AZ2501P1-1A-12DW
Power/Signal Relay, 1 Form A, SPST, 15.6VDC (Coil), DC Input, Random, AC Output
AZETTLER
AZ2501P1-1A-12DWK
Power/Signal Relay, 1 Form A, SPST, 15.6VDC (Coil), DC Input, Random, AC Output
AZETTLER
AZ2501P1-1A-12DWR
Power/Signal Relay, 1 Form A, SPST, 15.6VDC (Coil), DC Input, Random, AC Output
AZETTLER
AZ2501P1-1A-24DE
Power/Signal Relay, 1 Form A, SPST, 31.2VDC (Coil), DC Input, Random, AC Output
AZETTLER
AZ2501P1-1A-24DKR
Power/Signal Relay, 1 Form A, SPST, 31.2VDC (Coil), DC Input, Random, AC Output
AZETTLER
AZ2501P1-1A-24DWK
Power/Signal Relay, 1 Form A, SPST, 31.2VDC (Coil), DC Input, Random, AC Output
AZETTLER
©2020 ICPDF网 联系我们和版权申明