AZ755-1A-9D [ZETTLER]

20 AMP MINIATURE POWER RELAY; 20 AMP小型功率继电器
AZ755-1A-9D
型号: AZ755-1A-9D
厂家: ZETTLER ELECTRONICS    ZETTLER ELECTRONICS
描述:

20 AMP MINIATURE POWER RELAY
20 AMP小型功率继电器

继电器 功率继电器
文件: 总2页 (文件大小:55K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
AZ755  
20 AMP MINIATURE  
POWER RELAY  
FEATURES  
Dielectric strength 5000 Vrms  
Low cost  
Epoxy sealed version available  
20 Amp switching — single pole contacts  
Isolation spacing greater than 8mm  
UL, CUR file E44211  
TÜV file R9659060  
CONTACTS  
GENERAL DATA  
Arrangement  
SPST (1 Form A, 1 Form B)  
SPDT (1 Form C)  
Life Expectancy  
Mechanical  
Electrical  
Minimum operations  
5 x 106  
5 x 104 at 16 A 250 VAC Res.  
2 x 104 at 20 A 277 VAC Res.  
Ratings  
Resistive load:  
Max. switched power: 480 W or 5540 VA  
Max. switched current: 20 A  
Operate Time (typical) 8 ms at nominal coil voltage  
Max. switched voltage: 150 VDC* or 380 VAC  
Release Time (typical) 5 ms at nominal coil voltage  
* Note: If switching voltage is greater than 30 VDC,  
special precautions must be taken.  
Please contact the factory.  
(with no coil suppression)  
Dielectric Strength  
5000 Vrms coil to contact  
(at sea level for 1 min.) 1000 Vrms between open contacts  
Rated Load  
UL, CUR  
20 A at 277 VAC N.O. resistive, 50k cycles  
16 A at 240 VAC general use, 100k cycles  
12 A at 277 VAC N.O. resistive., 100k cycles  
20 A at 24 VDC resistive  
Insulation  
Resistance  
1000 megohms min. at 20°C  
500 VDC 50% RH  
Dropout  
Greater than 10% of nominal coil voltage  
1 HP 240 VAC  
TV-8 120 VAC N.O. (silver tin oxide only)  
Ambient Temperature At nominal coil voltage  
TÜV  
16 A at 30 VDC, 250 VAC resistive, 100k cycles  
13 A at 420 VAC res., 100k cycles (1 Form A)  
Operating  
Storage  
-40°C (-40°F) to 85°C (185°F)  
-40°C (-40°F) to 105°C (221°F)  
0.062" (1.5 mm) DA at 10–55 Hz  
10 g  
Material  
Silver cadmium oxide or silver tin oxide  
Vibration  
Resistance  
< 50 milliohms initially  
(24 V, 1 A voltage drop method)  
Shock  
Enclosure  
P.B.T. polyester  
Terminals  
Tinned copper alloy, P.C.  
270°C (518°F)  
COIL  
Max. Solder Temp.  
Max. Solder Time  
Max. Solvent Temp.  
Power  
5 seconds  
At Pickup Voltage  
(typical)  
270 mW  
80°C (176°F)  
Max. Continuous  
Dissipation  
1.9 W at 20°C (68°F) ambient  
Max. Immersion Time 30 Seconds  
Temperature Rise  
Temperature  
34°C (61°F) at nominal coil voltage  
Max. 130°C (266°F)  
Weight  
18.5 grams  
Packing unit in pcs  
50 per plastic tray / 500 per carton box  
NOTES  
1. All values at 20°C (68°F).  
2. Relay may pull in with less than “Must Operate” value.  
3. Specifications subject to change without notice.  
ZETTLER electronics GmbH  
Junkersstrasse 3, D-82178 Puchheim, Germany  
Tel. +49 89 800 97 0  
Fax +49 89 800 97 200  
office@ZETTLERelectronics.com  
www.ZETTLERelectronics.com  
2004-08-11  
AZ755  
RELAY ORDERING DATA  
COIL SPECIFICATIONS  
ORDER NUMBER*  
Nominal Coil  
VDC  
Must Operate  
Max. Continuous  
VDC  
Coil Resistance  
Ohm  
Form A  
(SPST)  
Form C  
(SPDT)  
VDC  
5
6
3.6  
9.4  
11.4  
17.4  
22.8  
27.9  
45.7  
89.0  
115.3  
170.5  
47 ±10%  
69 ±10%  
AZ755–1A–5D  
AZ755–1C–5D  
AZ755–1C–6D  
AZ755–1C–9D  
AZ755–1C–12D  
AZ755–1C–18D  
AZ755–1C–24D  
AZ755–1C–48D  
AZ755–1C–60D  
AZ755–1C–110D  
4.3  
6.5  
AZ755–1A–6D  
AZ755–1A–9D  
AZ755–1A–12D  
AZ755–1A–18D  
AZ755–1A–24D  
AZ755–1A–48D  
AZ755–1A–60D  
AZ755–1A–110D  
9
155 ±10%  
12  
8.6  
275 ±10%  
18  
13.0  
17.3  
34.6  
43.2  
73.9  
620 ±10%  
24  
1,100 ±15%  
4,400 ±15%  
6,880 ±15%  
22,900 ±15%  
48  
60  
110 **  
* Substitute “1B” in place of “1A” or “1C” to indicate 1 Form B contact arrangement.  
Add suffix “E” at the end of order number for epoxy sealed version. Add suffix “A” for silver tin oxide contacts. Add suffix “F” for Class F.  
** 110VDC coil not TÜV approved.  
MECHANICAL DATA  
PC BOARD LAYOUT  
.197.197  
(5) (5)  
.590  
(15)  
1.14  
(29)  
.51  
(13)  
.295 (7.5)  
.08  
(2.1)  
8 x ø .05  
[ø 1.3]  
(Form B & C only)  
Viewed toward terminals  
WIRING DIAGRAMS  
Terminal No. Dimensions Tol.: 0.005 (0.13)  
1,2,4,5,7,8 0.018 (0.457) x 0.038 (0.965)  
Form B  
Form A  
Form C  
3,6  
0.011 (0.279) x 0.038 (0.965)  
2
7
3
6
1
8
1
8
3
4
5
1
8
2
7
3
6
4
5
6
Viewed toward terminals  
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"  
ZETTLER electronics GmbH  
Junkersstrasse 3, D-82178 Puchheim, Germany  
Tel. +49 89 800 97 0  
Fax +49 89 800 97 200  
office@ZETTLERelectronics.com  
www.ZETTLERelectronics.com  
2004-08-11  

相关型号:

AZ755-1A-9DF

Electromechanical Relay, SPST, Latched, 17.4VDC (Coil), 20A (Contact), 150VDC (Contact), Random, AC/DC Output,
AZETTLER

AZ755-1C-110D

20 AMP MINIATURE POWER RELAY
ZETTLER

AZ755-1C-110D

20 AMP MINIATURE POWER RELAY
AZETTLER

AZ755-1C-110DE

Electromechanical Relay, SPDT, Latched, 170.5VDC (Coil), 20A (Contact), 150VDC (Contact), Random, AC/DC Output,
AZETTLER

AZ755-1C-12D

20 AMP MINIATURE POWER RELAY
ZETTLER

AZ755-1C-12D

20 AMP MINIATURE POWER RELAY
AZETTLER

AZ755-1C-12DE

Electromechanical Relay, SPDT, Latched, 22.8VDC (Coil), 20A (Contact), 150VDC (Contact), Random, AC/DC Output
AZETTLER

AZ755-1C-12DEF

Electromechanical Relay, SPDT, Latched, 22.8VDC (Coil), 20A (Contact), 150VDC (Contact), Random, AC/DC Output,
AZETTLER

AZ755-1C-18D

20 AMP MINIATURE POWER RELAY
ZETTLER

AZ755-1C-18D

20 AMP MINIATURE POWER RELAY
AZETTLER

AZ755-1C-24D

20 AMP MINIATURE POWER RELAY
ZETTLER

AZ755-1C-24D

20 AMP MINIATURE POWER RELAY
AZETTLER