AZ770-1A-24DS [ZETTLER]
SPDT SUBMINIATURE POWER RELAY; SPDT超小型功率继电器型号: | AZ770-1A-24DS |
厂家: | ZETTLER ELECTRONICS |
描述: | SPDT SUBMINIATURE POWER RELAY |
文件: | 总2页 (文件大小:55K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AZ770
SPDT SUBMINIATURE
POWER RELAY
FEATURES
• 5 kV dielectric strength, 10 kV surge
• 8mm creepage and clearance
• Proof tracking index (PTI/CTI) 250
• 5 Amp switching (1 Form A: 20A inrush)
• Epoxy sealed version available
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
1 Form A: EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE file 40006815
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 5 A 250 VAC Res.
Ratings
Resistive load:
Operate Time (typical) 8 ms at nominal coil voltage
Max. switched power: 150 W or 1250 VA
Max. switched current:
Max. switched voltage: 150 VDC* or 380 VAC
5 A
Release Time (typical) 4 ms at nominal coil voltage
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
5000 Vrms coil to contact
Rated Load
UL, CUR
Form A (N.O.)
Surge Voltage
Coil to contact
10,000V (at 1.2x50 µs)
5 A at 250 VAC, Res., 100k cycles
5 A at 30 VDC, Res., 100k cycles
/8 HP, 125 / 250 VAC, 100k cycles
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
1
3 A at 250 VAC, cos phi 0.4, 100k cycles
C300 Pilot Duty, 125 / 250 VAC, 100k cycles
TV-2, 120 VAC
Insulation
C250
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Form C
3 A at 250 VAC, Res., 100k cycles
3 A at 30 VDC, Res., 100k cycles
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
VDE
5 A at 250 VAC, Res., 100k cycles at 85°C
Silver nickel, gold plating available
< 100 milliohms initially
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
0.062" (1.5 mm) DA at 10–50 Hz
10 g operating, 100 g damage
P.B.T. polyester
Material
Resistance
Vibration
Shock
COIL
Enclosure
Power
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
At Pickup Voltage
(typical)
253 mW standard coil
113 mW sensitive coil
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Continuous
Dissipation
1.25 W at 20°C (68°F) ambient
5 seconds
80°C (176°F)
Temperature Rise
41°C (74°F) standard coil
(at nominal voltage) 22°C (40°F) sensitive coil
Max. Immersion Time 30 seconds
Temperature
Max. 130°C (266°F)
Weight
4.6 grams
NOTES
Packing unit in pcs
100 per plastic tray / 1000 per carton box
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2005-08-04
AZ770
RELAY ORDERING DATA
STANDARD RELAYS – TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
Form A (SPST)
Form C (SPDT)
3
5
2.25
3.75
4.5
3.9
6.5
20
AZ770–1A–3D
AZ770–1A–5D
AZ770–1A–6D
AZ770–1A–9D
AZ770–1A–12D
AZ770–1A–18D
AZ770–1A–24D
AZ770–1A–48D
AZ770–1C–3D
AZ770–1C–5D
AZ770–1C–6D
AZ770–1C–9D
AZ770–1C–12D
AZ770–1C–18D
AZ770–1C–24D
AZ770–1C–48D
55
80
6
7.8
9
6.75
9.0
11.7
15.6
23.4
31.2
62.4
180
12
18
24
48
320
13.5
18.0
36.0
720
1,280
5,120 ±15%
SENSITIVE RELAYS – TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
Form A (SPST)
3
5
2.25
3.75
4.5
5.1
8.5
45
125
AZ770–1A–3DS
AZ770–1A–5DS
AZ770–1A–6DS
AZ770–1A–9DS
AZ770–1A–12DS
AZ770–1A–18DS
AZ770–1A–24DS
AZ770–1A–48DS
6
10.2
15.3
20.4
30.6
40.8
81.6
180
9
6.75
9.0
400
12
18
24
48
720
13.5
18.0
36.0
1,600
2,800
11,520 ±15%
* Add suffix “E” for epoxy sealed version. Add suffix “K” for Type 2 footprint. Add suffix “G” for gold plated contacts.
MECHANICAL DATA
PC BOARD LAYOUT
.703 Max
[17.85]
.407 Max
[10.35]
5 x ø .05
[ø 1.3]
.50
[12.7]
.60
[15.24]
5 x ø .05
[ø 1.3]
.1
[2.54]
.494 Max
[12.55]
.25
.30
.30
[7.6]
[6.35]
[7.6]
*
*
.157
[4]
.06
[1.5]
.157
[4.0]
.016
[0.4]
2 x .012
[0.3]
ø .02
[ø 0.5]
.03
[0.8]
Type 1
Viewed toward terminals
Type 2
Type 1
*Not used on Form A version
.407 Max
[10.35]
.703 Max
[17.85]
WIRING DIAGRAMS
3
3
1
1
2
.494 Max
[12.55]
4
4
5
5
2
*
*
.157
[4]
.016
[0.4]
Type 1
Type 2
.03
[0.8]
ø .02
[0.5]
3 x .012
[0.3]
Viewed toward terminals
*Not used on Form A version
Type 2
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2005-08-04
相关型号:
AZ770-1A-24DSE
Power/Signal Relay, 1 Form A, SPST, Latched, 40.8VDC (Coil), 5A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output
AZETTLER
AZ770-1A-24DSEG
Electromechanical Relay, SPST, Latched, 40.8VDC (Coil), 5A (Contact), 30VDC (Contact), Random, AC/DC Output,
AZETTLER
AZ770-1A-24DSG
Power/Signal Relay, 1 Form A, SPST, Latched, 40.8VDC (Coil), 5A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output
AZETTLER
AZ770-1A-3DE
Power/Signal Relay, 1 Form A, SPST, Latched, 3.9VDC (Coil), 5A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output
AZETTLER
AZ770-1A-3DEG
Electromechanical Relay, SPST, Latched, 3.9VDC (Coil), 5A (Contact), 30VDC (Contact), Random, AC/DC Output,
AZETTLER
AZ770-1A-3DG
Power/Signal Relay, 1 Form A, SPST, Latched, 3.9VDC (Coil), 5A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output
AZETTLER
©2020 ICPDF网 联系我们和版权申明