ZMD31015AEFT [ZMD]
Low-cost sensro signal conditioner with dignostics; 与dignostics低成本sensro信号调理器
| 型号： | ZMD31015AEFT |
| 厂家： | 
Zentrum Mikroelektronik Dresden AG |
| 描述： | Low-cost sensro signal conditioner with dignostics |
| 文件： | 总2页 (文件大小：441K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The Analog Mixed Signal Company
ZMD31015
™
RBicdLite
Low-Cost Sensor Signal Conditioner
with Diagnostics
PRELIMINARY
Features
• Digital compensation of sensor offset, sensitivity, temperature
TM
The RBicdLite is adjustable to nearly all piezo-resistive bridge
drift and non-linearity
sensors. Measured and corrected bridge values are provided
at the SIGTM pin, which can be configured as an analog voltage
output or as a one-wire serial digital output.
• Programmable analog gain and digital gain;
accommodates bridges with spans < 1mV/V and high offset
• Many diagnostic features on chip (e.g., EEPROM signature,
bridge connection checks, bridge short detection, power loss
detection)
• Independently programmable high and low clipping levels
• 24-bit customer ID field for module traceability
• Digital calibration and configuration via one-wire interface –
quick and precise
The digital one-wire interface can be used for a simple PC-
controlled calibration procedure to program a set of calibration
TM
coefficients into an on-chip EEPROM. The calibrated RBicdLite
and a specific sensor are mated digitally: fast, precise, and without
the cost overhead associated with trimming by external devices
TM
or laser. Integrated diagnostics functions make the RBicdLite
• Internal temperature compensation reference
(no external components)
• Option for external temperature compensation with addition
of single diode
• Output options: rail-to-rail ratiometric analog voltage
(12-bit resolution), absolute analog voltage,
digital one-wire-interface
particularly well suited for automotive applications.
TM
• The RBicdLite Development Kit is available –
includes the Development Board, SOP8 samples, software,
and documentation.
• Support for industrial mass calibration is available
• Quick circuit customization possible for large production volumes
• Supply voltage 2.7 to 5.5V; with external JFET, 5.5 to 30V
• Fast power-up to data out response; output available 5ms after
power up
• Current consumption depends on programmed sample rate;
1mA down to 250µA (typical)
• Operation temperature: –50°C to +150°C
• Fast response time: 1ms (typical)
Application Circuit
• High voltage protection up to 30V with external JFET
• No external trimming components required
• High accuracy (±0.1% FSO @ -25 to 85°C;
±0.25% FSO @ -50 to 150°C)
Brief Description
TM
The RBicdLite is a CMOS integrated circuit for highly accurate
amplification and sensor-specific correction of bridge sensor
signals. Digital compensation of sensor offset, sensitivity,
temperature drift and non-linearity is accomplished via an internal
digital signal processor running a correction algorithm with
calibration coefficients stored in a non-volatile EEPROM.
TM
Typical RBicdLite Application Circuit
Application Examples
Automotive
Industrial
Appliances
Consumer/Medical
• Airflow
• Differential Pressure
• Process Control
• Process Control
• Dataloggers
• Filter Check
• Refrigerant
• Pressure Monitoring
• Blood Pressure Meters
• PDAs
• Mobile Phones
Ordering Code
Example:
Z M D 3 1 0 1 5 B I F - T
ZMD Product Sales Name
Delivery Form**
T = delivery in tube
R = delivery in tape on reel
S = special (e.g. sample box)
Design Revision
A = first design revision
B = second design revision
etc.
Die/Package Options
B
C
D
F
= tested dice on unsawn wafer
= tested dice on frame
= tested dice in waffle pack
= finished parts in plastic package
Target Application Area/
Usual Operating Temperature Range*
= Industrial (-40°C to +125°C)
E = Extended automotive (-50°C to +125°C)
I
G1 = finished parts in “green” plastic package
(lead-free terminals – pure Sn)
*
only for serial parts; engineering samples don’t have this character
** only for finished parts in plastic package
Engineering samples can be marked with the additional characters “ES”.
Not all possible product versions are available. Please ask ZMD sales
if and when a certain product version is available.
For further
information:
ZMD AG
ZMD America, Inc.
ZMD Far East
1F, No. 14, Lane 268, Sec. 1 Guangfu Rd.
HsinChu City 300
Grenzstrasse 28
01109 Dresden
Germany
201 Old Country Road, Suite 204
Melville, NY 11747
USA
Taiwan
Tel +49.351.8822.366
Fax +49.351.8822.337
sales@zmd.de
Tel +1.631.549.2666
Fax +1.631.549.2882
sales@zmda.com
Tel +886.3.563.1388
Fax +886.3.563.6385
sales@zmd.de
www.zmd.biz
© ZMD AG 2006 · Rev. 0.1 · Preliminary
This information applies to a product under development. Its characteristics and specifications are subject to change without notice. ZMD assumes no obligation regarding future manufacture
unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, ZMD shall not be liable to any customer, licencee or any other third party
for any damages in connection with or arising out of the furnishing, performance or use of this technical data. No obligation or liability to any customer, licencee or any other third party shall
result from ZMD‘s rendering of technical or other services.
相关型号：
©2020 ICPDF网 联系我们和版权申明