Electronic Components Datasheet Search
English 中文版
Manufacturer Upload
Part Name:
 
Description:
HSD8M32F4V-10L  HMD8M32M4EG  D8NA10Y4  TCFGA0J685K  TCFGA1A685M  TCFGA1A106M  HMD8M32M16EG  RFD8P06ESM  TCFGA1A155K  D8NA3Y4  
2430-050 TRIAXIAL ANALOG ACCELEROMETER MODULE
Prototype PCB
Part No.:   2430-050
Download: Download   Right selection Save Target As
View Datasheet (Html)   No need to install PDF reader software
Description:   TRIAXIAL ANALOG ACCELEROMETER MODULE
File Size :   519 K    
Page : 3 Pages
Logo:   
Maker   ETC [ ETC ]#
Buy Now :   
  2430-050 Datasheet PDF page 2 2430-050 Datasheet PDF page 3  
100%
SILICON DESIGNS, INC
Model 2430
TRIAXIAL ANALOG ACCELEROMETER MODULE
!
3 Axis Acceleration Sensing
!
Capacitive Micromachined
!
Nitrogen Damped
!
±5V Single Ended Outputs
!
Fully Calibrated
!
Low Power Consumption
!
-40 to +85EC Operation
E
!
±11 to ±16 VDC Power
!
6 Wire Connection
!
Serialized for Traceability
!
Responds to DC & AC Acceleration
!
Outputs Referenced to External Ground
!
Non Standard g Ranges Available
!
Rugged Black Anodized Aluminum Module
ORDERING INFORMATION
Full Scale
Model
Acceleration
Number
± 2g
± 5g
± 10 g
± 25 g
± 50 g
± 100 g
± 200 g
2430-002
2430-005
2430-010
2430-025
2430-050
2430-100
2430-200
DESCRIPTION
The Model 2430 triaxial accelerometer combines three orthogonally mounted Model
1210 accelerometers in a rugged case for measuring accelerations in commercial
and industrial environments. It is tailored for zero to medium frequency
instrumentation applications. The anodized aluminum case is epoxy sealed and is
easily mounted via two #8 (or M4) screws. The design includes an instrumentation
amplifier on each axis providing high drive capability and low output impedance.
On-board voltage regulation and an internal voltage reference eliminate the need for precision power supplies. No
power supply current flows through the
OUTPUT REF
wire; this high impedance input is used only as a reference for
the acceleration outputs which reduces cross talk among the three channels by rejecting noise from voltage
differences between the user's data acquisition equipment and power supply grounds. The 2430 is relatively
insensitive to temperature changes and gradients. An optional initial calibration sheet (2430-CAL) and periodic
calibration checking are also available.
OPERATION
The Model 2430 produces three analog voltage outputs
which vary with acceleration. The
Z
axis is perpendicular
to the bottom of the package, with positive acceleration
defined as a force pushing on the bottom of the package.
The
X
and
Y
axis directions are marked on the cover with
positive acceleration defined as acceleration in the
direction of the axis arrow. The outputs are single ended
and vary with respect to the voltage at the
OUTPUT REF
input which should be approximately centered between
the
+V
S
and
-V
S
supply voltages. The output scale factor
is independent of the supply voltages from ±12 to ±16
volts. At zero acceleration, the output voltage is nominally
zero volts; at ±full scale acceleration the output voltage
is ±5 volts respectively.
APPLICATIONS
VIBRATION MONITORING
VIBRATION ANALYSIS
CRASH TESTING
ROBOTICS
MACHINE CONTROL
INSTRUMENTATION
MODAL ANALYSIS
ROTATING MACHINERY MONITOR
Silicon Designs, Inc.
!
1445-NW Mall Street, Issaquah, WA 98027-5344
!
Phone: 425-391-8329
!
Fax: 425-391-0446
web site:
www.silicondesigns.com
[page 1]
Jan 08
Home - IC Supply - Link
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号


粤ICP备13051289号-7