Electronic Components Datasheet Search
English 中文版
Manufacturer Upload
Part Name:
 
Description:
2440-100 TRIAXIAL ANALOG ACCELEROMETER MODULE
Prototype PCB
Part No.:   2440-100
Download: Download   Right selection Save Target As
View Datasheet (Html)   No need to install PDF reader software
Description:   TRIAXIAL ANALOG ACCELEROMETER MODULE
File Size :   470 K    
Page : 3 Pages
Logo:   
Maker   ETC [ ETC ]#
Buy Now :   
  2440-100 Datasheet PDF page 2 2440-100 Datasheet PDF page 3  
100%
SILICON DESIGNS, INC
Model 2440
TRIAXIAL ANALOG ACCELEROMETER MODULE
!
3 Axis Acceleration Sensing
!
Capacitive Micromachined
!
Nitrogen Damped
!
Low Noise
!
±5V Single Ended Outputs
!
Fully Calibrated
!
Low Power Consumption
!
-55 to +125EC Operation
E
!
±11 to ±16 VDC Power
!
6 Wire Connection
!
Serialized for Traceability
!
Responds to DC & AC Acceleration
!
Outputs Referenced to External Ground
!
Non Standard g Ranges Available
!
Rugged Black Anodized Aluminum Module
ORDERING INFORMATION
Full Scale
Model
Acceleration
Number
± 2g
± 5g
± 10 g
± 25 g
± 50 g
±100 g
±200 g
2440-002
2440-005
2440-010
2440-025
2440-050
2440-100
2440-200
DESCRIPTION
The Model 2440 triaxial accelerometer is a higher performance and wider
temperature range version of the model 2430. It combines three orthogonally
mounted Model 1221L accelerometers, in a rugged case for measuring
accelerations in commercial and industrial environments. This low noise module
is tailored for zero to medium frequency instrumentation applications. The anodized
aluminum case is epoxy sealed and is easily mounted via two #8 (or M4) screws.
The design includes an instrumentation amplifier on each axis providing high drive
capability and low output impedance. On-board voltage regulation and an internal voltage reference eliminate the
need for precision power supplies. No power supply current flows through the
OUTPUT REF
wire; this high impedance
input is used only as a reference for the acceleration outputs which reduces cross talk among the three channels by
rejecting noise from voltage differences between the user's data acquisition equipment and power supply grounds.
The 2440 is relatively insensitive to temperature changes and gradients. An initial calibration sheet (2440-CAL) is
included and periodic calibration checking is available.
OPERATION
The Model 2440 produces three analog voltage outputs
which vary with acceleration. The
Z
axis is perpendicular
to the bottom of the package, with positive acceleration
defined as a force pushing on the bottom of the package.
The
X
and
Y
axis directions are marked on the cover with
positive acceleration defined as acceleration in the
direction of the axis arrow. The outputs are single ended
and vary with respect to the voltage at the
OUTPUT REF
input which should be approximately centered between
the
+V
S
and
-V
S
supply voltages. The output scale factor
is independent of the supply voltages from ±12 to ±16
volts. At zero acceleration, the output voltage is nominally
zero volts; at ±full scale acceleration the output voltage
is ±5 volts respectively.
APPLICATIONS
VIBRATION MONITORING
VIBRATION ANALYSIS
CRASH TESTING
ROBOTICS
MACHINE CONTROL
INSTRUMENTATION
MODAL ANALYSIS
ROTATING MACHINERY MONITOR
Silicon Designs, Inc.
!
1445-NW Mall Street, Issaquah, WA 98027-5344
!
Phone: 425-391-8329
!
Fax: 425-391-0446
web site:
www.silicondesigns.com
[page 1]
Sep 07
Home - IC Supply - Link
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号


粤ICP备13051289号-7