F1G32

更新时间:2025-01-23 12:38:29
品牌:ITF
描述:SAW Bandpass Filter F1G32

F1G32 概述

SAW Bandpass Filter F1G32 SAW带通滤波器F1G32

F1G32 数据手册

通过下载F1G32数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
SAW Bandpass Filter F1G32  
Features  
RF Bandpass Filter  
No impedance matching require for operation at 50  
Ceramic Surface Mounted Device Package ( 3.0 mm * 3.0 mm )  
Single-ended Operation  
RoHS Compliant  
Package Dimensions  
1
2
6
5
4
6
5
4
1
2
3
I
1G32  
3
Dimensions shown are nominal in millimeters  
Pin Configurations  
Body : Al2O3 Ceramic  
Lid : Kovar, Ni Plated  
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um  
Ni Plating  
2
5
Input  
Output  
1, 3, 4, 6  
Case ground  
Maximum Ratings  
Parameters  
Unit  
Minimum  
Typical  
Maximum  
Operating Temperature Range  
Storage Temperature Range  
-40  
-40  
-
25  
25  
-
85  
85  
15  
Power Handling Capability  
dBm  
Electrostatics Sensitive Device (ESD)  
Part No.  
Rev. Date  
Rev.  
F1G32  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2013-05-20  
NWOE01-AS01  
1/7  
SAW Bandpass Filter F1G32  
Specifications  
Fc = 1395 MHz  
Minimum  
Typical  
1395  
2.6  
Maximum  
Unit  
MHz  
dB  
Center Frequency ( Fc )  
-
-
-
-
-
Insertion Loss ( 1385 ~ 1405 MHz )  
Amplitude Ripple ( 1385 ~ 1405 MHz )  
Absolute Group Delay ( 1385 ~ 1405 MHz )  
3.5  
1.0  
30  
0.4  
dB p-p  
ns  
6
Attenuation  
0.3 ~ 960 MHz  
1050 ~ 1120 MHz  
1248 ~ 1268 MHz  
1700 ~ 2500 MHz  
2500 ~ 3000 MHz  
45  
45  
40  
30  
20  
50  
48  
46  
41  
32  
-
-
-
-
-
dB  
Input/Output Impedance  
50  
Ohms  
Notes :  
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and  
full 2 port calibration.  
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing  
tolerances  
3) All attenuation measurements are measured relative to insertion loss  
Part No.  
Rev. Date  
Rev.  
F1G32  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2013-05-20  
NWOE01-AS01  
2/7  
SAW Bandpass Filter F1G32  
Matching Schematic  
( Actual matching values may vary due to PCB layout and parasitics )  
Input  
Output  
50  
50  
Ω
Ω
Marking Configuration  
1)  
I2)  
1G323)  
1) Pad Number 1 Index  
2) Manufacturer name  
3) Marking Number  
* Ink or Laser Marking available  
Part No.  
Rev. Date  
Rev.  
F1G32  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2013-05-20  
NWOE01-AS01  
3/7  
SAW Bandpass Filter F1G32  
Typical Performance ( at 25)  
Part No.  
Rev. Date  
Rev.  
F1G32  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2013-05-20  
NWOE01-AS01  
4/7  
SAW Bandpass Filter F1G32  
Input / Output VSWR Charts  
Input / Output Smith Charts  
Part No.  
Rev. Date  
Rev.  
F1G32  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2013-05-20  
NWOE01-AS01  
5/7  
SAW Bandpass Filter F1G32  
Packing Specifications  
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )  
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.  
TOP COVER TAPE  
REEL  
CARRIER TAPE  
Tape Specification  
1. Leader part and vacant position specification  
Vacant  
150mm min.  
Component  
contained  
Vacant  
150mm min.  
Leader part  
250mm min.  
END  
START  
Tape Running Direction  
2. Tensile strength of carrier tape  
4.4N/mm width  
Direction of pull  
Top cover tape  
3. Top cover tape adhesion  
1) pull off angle : 0~15°  
2) speed : 300mm/min  
3) force : 20~70g  
0~15 degree  
Carrier tape  
Part No.  
Rev. Date  
Rev.  
F1G32  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2013-05-20  
NWOE01-AS01  
6/7  
SAW Bandpass Filter F1G32  
Carrier Tape Dimensions [unit : mm]  
A
B
C
D
E
F
3.40 ± 0.1  
3.40 ± 0.1  
7.25 ± 0.1  
1.70 ± 0.1  
12.00 ± 0.1  
8.00 ± 0.1  
Part Direction  
Tape Running Direction  
Reel Dimensions [unit : mm]  
Part No.  
Rev. Date  
Rev.  
F1G32  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2013-05-20  
NWOE01-AS01  
7/7  

F1G32 相关器件

型号 制造商 描述 价格 文档
F1G52 ITF SAW Bandpass Filter 获取价格
F1G56 ITF SAW Bandpass Filter 获取价格
F1G59 ITF SAW Bandpass Filter 获取价格
F1G5A ITF SAW Bandpass Filter F1G5A 获取价格
F1G5B ITF SAW Bandpass Filter F1G5B 获取价格
F1G5C ITF SAW Bandpass Filter F1G5C 获取价格
F1G61 ITF SAW Bandpass Filter F1G61 获取价格
F1G62 ITF SAW Bandpass Filter F1G62 获取价格
F1G64 ITF SAW Bandpass Filter F1G64 获取价格
F1G71 ITF SAW Bandpass Filter 获取价格

F1G32 相关文章

  • 三星电子专注提升1b DRAM性能与良率,否认重新设计传闻
    2025-01-22
    25
  • 特朗普宣布OpenAI、软银等联手投资5000亿美元建设人工智能基础设施
    2025-01-22
    29
  • 思瑞浦新推车规级LIN SBC芯片TPT1028Q,引领汽车电子高效新纪元
    2025-01-22
    26
  • 比利时氮化镓制造商BelGaN破产,中国买家积极竞购设备资产
    2025-01-22
    24