首页 > R76PN3120XX3XX

R76PN3120XX3XX

更新时间：2025-07-12 12:25:35
品牌：KEMET
描述：POLYPROPYLENE CAPACITOR WITH DOUBLE SIDED METALLIZED FILM ELECTRODES

PDF下载

中文翻译

免费 PCB/SMT

R76PN3120XX3XX 概述

POLYPROPYLENE CAPACITOR WITH DOUBLE SIDED METALLIZED FILM ELECTRODES 带双聚丙烯薄膜电容双面金属化膜电极的

R76PN3120XX3XX 数据手册

通过下载R76PN3120XX3XX数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
Loose  
Taped  
tꢀꢁꢂꢃꢄꢅ ꢄꢁꢁꢅꢂꢃꢄꢆꢂꢇns: deflection circuits in TV-sets (S-  
correction and fly-back tuning) and monitors, switching  
spikes suppression in SMPS, lamp capacitor for electronic  
ballast and compact lamps, Snubbꢀꢁ and SCR  
commutating circuits, applications with high voltage and high  
current.  
PRODUCT CODE: R76  
Pitch  
(mm)  
Box thickness  
(mm)  
Maximum dimensions (mm)  
B max  
H max  
L max  
7.5  
All  
All  
B +0.1  
B +0.2  
B +0.2  
B +0.2  
B +0.2  
B +0.2  
B +0.3  
H +0.1  
H +0.1  
H +0.1  
H +0.1  
H +0.1  
H +0.1  
H +0.1  
L +0.2  
L +0.2  
L +0.3  
L +0.5  
L +0.3  
L +0.3  
L +0.3  
10.0  
15.0  
15.0  
22.5  
27.5  
37.5  
<7.5  
≥7.5  
All  
p = 7.5  
p =10  
all  
15 ≤ p ≤27.5  
p = 37.5  
all  
b
≤3,5 >3,5  
all  
Ød±0.05 0.5  
0.6  
0.6  
0.8  
1.0  
All  
All  
All dimensions are in mm.  
GENERal tEcHNical Data  
pRoDUct coDE SyStEM  
The part number, comprising 14 digits, is formed as follows:  
Dꢂeꢅeꢃꢆrꢂꢃ: polypropylene film.  
pꢅꢄꢆes:  
double sided metallized polyester film.  
1
2
3
4
5
6
7
8
9
10 11 12 13 14  
Wꢂndꢂng: non-inductive type.  
-
ꢁ 7 6  
leꢄds:  
for Ø ≥ 0,6mm : tinned wire  
for Ø = 0,5mm : tinned wire, low thermical conductivity  
Digit 1 to 3  
Digit 4  
Series code.  
d.c. rated voltage:  
I = 250V  
Q = 1000V  
Pitch:  
M = 400V  
T = 1600V  
P = 630V  
U = 2000V  
prꢇꢆeꢃꢆꢂꢇn: plastic case, thermosetting resin filled.  
Box material is solvent resistant and flame  
retardant according to UL94 V0.  
Mꢄrkꢂng: manufacturer’s logo, series (R76), dielectric  
code (MKP), capacitance, tolerance, D.C. rated  
voltage, manufacturing date code.  
cꢅꢂmꢄꢆꢂꢃ ꢃꢄꢆegꢇrꢀ:55/105/56 IEC 60068-1  
oꢁerꢄꢆꢂng ꢆemꢁerꢄꢆure rꢄnge: -55 to +105°C  
Reꢅꢄꢆed dꢇꢃumenꢆs: IEC 60384-16  
Digit 5  
D=7.5 mm; F=10mm; I=15mm;  
N=22.5mm; R=27.5mm; W=37.5mm.  
Digit 6 to 9  
Digits 7 - 8 - 9 indicate the first three digits of  
Capacitance value and the 6th digit indicates  
the number of zeros that must be added to  
obtain the Rated Capacitance in pF.  
Digit 10 to 11 Mechanical version and/or packaging (table 1)  
Digit 12  
Identifies the dimensions and electrical  
characteristics.  
Digit 13  
Digit 14  
Internal use.  
Capacitance tolerance:  
H=2.5%; J=5%; K=10%  
Table 1 (for more detailed information, please refer to pages 14).  
leꢄd ꢅengꢆh  
Sꢆꢄndꢄrd  
ꢁꢄꢃkꢄgꢂng sꢆꢀꢅe  
tꢄꢁꢂng sꢆꢀꢅe  
orderꢂng ꢃꢇde  
P2  
(mm)  
Fig.  
(No.)  
Pitch  
(mm)  
(Digit 10 to 11)  
(mm)  
AMMO-PACK  
06.35  
12.70  
19.05  
06.35  
12.70  
12.70  
19.05  
1
7.5  
DQ  
DQ  
DQ  
CK  
GY  
CK  
CK  
Sꢀ  
AMMO-PACK  
2
3
1
2
2
3
10.0/15.0  
22.5  
AMMO-PACK  
ꢁꢀꢀL Ø 355mm  
ꢁꢀꢀL Ø 355mm  
ꢁꢀꢀL Ø 500mm  
ꢁꢀꢀL Ø 500mm  
Loose, short leads  
7.5  
10.0/15.0  
10.0/15.0  
22.5/27.5  
04+2  
Loose, long leads  
(p<10mm)  
17+1/-2  
Z3  
Loose, long leads  
(p10mm)  
18+1/-1  
JM  
Loose, long leads  
(p≥15mm)  
30+5  
40  
50  
25+2/-1  
Note: Ammo-pack is the preferred packaging for taped version  
09/2008  
116  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
double sided metallized  
polyester carrier film  
polypropylene film  
dielectric  
1 seꢃꢆꢂꢇn  
(250Vdꢃ)  
Mꢄx  
Mꢄx  
dv/dꢆ  
(V/µs)  
250  
Rꢄꢆed  
cꢄꢁ.  
Rꢄꢆed  
cꢄꢁ.  
250Vdꢃ / 180Vꢄꢃ  
Std dimensions  
250Vdꢃ / 180Vꢄꢃ  
Std dimensions  
Mꢄx K0  
pꢄrꢆ Number  
Mꢄx K0  
pꢄrꢆ Number  
dv/dꢆ  
(V/µs)  
1100  
b
H
L
p
(V2/µs)  
55 E4  
55 E4  
55 E4  
55 E4  
55 E4  
55 E4  
55 E4  
b
H
L
p
(V2/µs)  
13 E4  
13 E4  
13 E4  
13 E4  
13 E4  
13 E4  
13 E4  
13 E4  
13 E4  
13 E4  
10 E4  
10 E4  
10 E4  
10 E4  
10 E4  
10 E4  
10 E4  
10 E4  
10 E4  
10 E4  
10 E4  
5 E4  
6800 pF 3.0 8.0 10.0 7.5  
8200 pF 3.0 8.0 10.0 7.5  
0.010 µF 3.0 8.0 10.0 7.5  
0.012 µF 4.0 9.0 10.0 7.5  
0.015 µF 4.0 9.0 10.0 7.5  
0.018 µF 4.0 9.0 10.0 7.5  
0.022 µF 4.0 9.0 10.0 7.5  
0.027 µF 5.0 10.5 10.0 7.5  
0.033 µF 5.0 10.5 10.0 7.5  
0.039 µF 6.0 12.0 10.5 7.5  
0.047 µF 6.0 12.0 10.5 7.5  
0.027 µF 4.0 9.0 13.0 10.0  
0.033 µF 4.0 9.0 13.0 10.0  
0.039 µF 4.0 9.0 13.0 10.0  
0.047 µF 5.0 11.0 13.0 10.0  
0.056 µF 5.0 11.0 13.0 10.0  
0.068 µF 6.0 12.0 13.0 10.0  
0.082 µF 6.0 12.0 13.0 10.0  
0.068 µF 5.0 11.0 18.0 15.0  
0.082 µF 5.0 11.0 18.0 15.0  
0.10 µF 5.0 11.0 18.0 15.0  
0.12 µF 6.0 12.0 18.0 15.0  
0.15 µF 6.0 12.0 18.0 15.0  
0.18 µF 7.5 13.5 18.0 15.0  
0.18 µF 9.0 12.5 18.0 15.0  
0.22 µF 7.5 13.5 18.0 15.0  
0.22 µF 9.0 12.5 18.0 15.0  
0.27 µF 8.5 14.5 18.0 15.0  
0.27 µF 9.0 12.5 18.0 15.0  
0.33 µF 10.0 16.0 18.0 15.0  
0.33 µF 13.0 12.0 18.0 15.0  
0.39 µF 10.0 16.0 18.0 15.0  
0.22 µF  
0.27 µF  
0.33 µF  
0.39 µF  
0.47 µF  
0.56 µF  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
7.0 16.0 26.5 22.5  
7.0 16.0 26.5 22.5  
8.5 17.0 26.5 22.5  
R76ID1680--3--  
R76ID1820--3--  
R76ID2100--3--  
R76ID2120--4--  
R76ID2150--4--  
R76ID2180--4--  
R76ID2220--4--  
R76ID2270--4--  
R76ID2330--4--  
R76ID2390--3--  
R76ID2470--3--  
R76IF2270--3--  
R76IF2330--3--  
R76IF2390--3--  
R76IF2470--3--  
R76IF2560--3--  
R76IF2680--3--  
R76IF2820--3--  
R76II 2680--3--  
R76II 2820--3--  
R76II 3100--3--  
R76II 3120--3--  
R76II 3150--3--  
R76II 3180--3--  
R76II 3180--7--  
R76II 3220--3--  
R76II 3220--7--  
R76II 3270--3--  
R76II 3270--7--  
R76II 3330--3--  
R76II 3330--7--  
R76II 3390--3--  
R76IN 3220--0--  
R76IN 3270--3--  
R76IN 3330--3--  
R76IN 3390--3--  
R76IN 3470--3--  
R76IN 3560--3--  
R76IN 3680--3--  
R76IN 3820--3--  
R76IN 4100--3--  
R76IN 4120--3--  
R76IR 3820--3--  
R76IR 4100--3--  
R76IR 4120--4--  
R76IR 4150--3--  
R76IR 4180--4--  
R76IR 4220--4--  
R76IR 4270--3--  
R76IR 4330--3--  
R76IR 4390--3--  
R76IR 4470--3--  
R76IR 4560--4--  
R76IW4120--3--  
R76IW4150--3--  
R76IW4180--3--  
R76IW4220--3--  
R76IW4270--3--  
R76IW4330--3--  
R76IW4390--3--  
R76IW4470--3--  
R76IW4560--3--  
R76IW4680--3--  
R76IW4820--3--  
R76IW5100--3--  
R76IW5120--3--  
R76IW5150--3--  
1100  
1100  
1100  
1100  
1100  
1100  
1100  
1100  
1100  
1100  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
550  
250  
250  
250  
250  
250  
250  
250  
250  
250  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
200  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
0.68 µF 10.0 18.5 26.5 22.5  
0.82 µF 10.0 18.5 26.5 22.5  
55 E4  
55 E4  
55 E4  
55 E4  
50 E4  
50 E4  
50 E4  
50 E4  
50 E4  
50 E4  
50 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
28 E4  
1.0  
1.2  
µF 11.0 20.0 26.5 22.5  
µF 13.0 22.0 26.5 22.5  
0.82 µF  
9.0 17.0 32.0 27.5  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10.0  
12.0  
15.0  
µF 11.0 20.0 32.0 27.5  
µF 11.0 20.0 32.0 27.5  
µF 13.0 22.0 32.0 27.5  
µF 13.0 22.0 32.0 27.5  
µF 14.0 28.0 32.0 27.5  
µF 18.0 33.0 32.0 27.5  
µF 18.0 33.0 32.0 27.5  
µF 18.0 33.0 32.0 27.5  
µF 22.0 37.0 32.0 27.5  
µF 22.0 37.0 32.0 27.5  
µF 11.0 22.0 41.5 37.5  
µF 11.0 22.0 41.5 37.5  
µF 11.0 22.0 41.5 37.5  
µF 13.0 24.0 41.5 37.5  
µF 13.0 24.0 41.5 37.5  
µF 16.0 28.5 41.5 37.5  
µF 16.0 28.5 41.5 37.5  
µF 19.0 32.0 41.5 37.5  
µF 19.0 32.0 41.5 37.5  
µF 20.0 40.0 41.5 37.5  
µF 20.0 40.0 41.5 37.5  
µF 24.0 44.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
550  
550  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
550  
5 E4  
0.47 µF 11.0 19.0 18.0 15.0  
550  
28 E4  
R76II 3470--3--  
5 E4  
5 E4  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: J (±5%); K (±10%)  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: J (±5%); K (±10%)  
All dimensions are in mm.  
Note: If the working voltage (V) is lower than the rated voltage (Vꢁ), the capacitor may work at higher dv/dt. In this case the  
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vꢁ /V.  
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in  
the above table. The dv/dt test is carried out at 2 times the above values.  
09/2008  
117  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
double sided metallized  
polyester carrier film  
polypropylene film  
dielectric  
1 seꢃꢆꢂꢇn  
(400Vdꢃ)  
Mꢄx  
dv/dꢆ  
Mꢄx  
dv/dꢆ  
(V/µs)  
500  
Rꢄꢆed  
cꢄꢁ.  
Rꢄꢆed  
cꢄꢁ.  
400Vdꢃ / 250Vꢄꢃ*  
Std dimensions  
400Vdꢃ / 250Vꢄꢃ*  
Std dimensions  
Mꢄx K0  
pꢄrꢆ Number  
Mꢄx K0  
pꢄrꢆ Number  
b
H
L
p
(V/µs)  
(V2/µs)  
136 E4  
b
H
L
p
(V2/µs)  
40 E4  
2700 pF  
3300 pF  
3900 pF  
4700 pF  
5600 pF  
6800 pF  
8200 pF  
0.010 µF  
0.012 µF  
0.015 µF  
0.018 µF  
0.022 µF  
0.027 µF  
0.010 µF  
0.012 µF  
0.015 µF  
0.018 µF  
0.022 µF  
0.027 µF  
0.033 µF  
0.039 µF  
0.047 µF  
0.033 µF  
0.039 µF  
0.047 µF  
0.056 µF  
0.068 µF  
0.082 µF  
0.10 µF  
0.10 µF  
0.12 µF  
0.12 µF  
0.15 µF  
3.0 8.0 10.0 7.5 1700  
3.0 8.0 10.0 7.5 1700  
3.0 8.0 10.0 7.5 1700  
3.0 8.0 10.0 7.5 1700  
3.0 8.0 10.0 7.5 1700  
4.0 9.0 10.0 7.5 1700  
4.0 9.0 10.0 7.5 1700  
4.0 9.0 10.0 7.5 1700  
4.0 9.0 10.0 7.5 1700  
5.0 10.5 10.0 7.5 1700  
5.0 10.5 10.0 7.5 1700  
6.0 12.0 10.5 7.5 1700  
6.0 12.0 10.5 7.5 1700  
4.0 9.0 13.0 10.0 1500  
4.0 9.0 13.0 10.0 1500  
4.0 9.0 13.0 10.0 1500  
4.0 9.0 13.0 10.0 1500  
4.0 9.0 13.0 10.0 1500  
5.0 11.0 13.0 10.0 1500  
5.0 11.0 13.0 10.0 1500  
6.0 12.0 13.0 10.0 1500  
6.0 12.0 13.0 10.0 1500  
0.12 µF  
0.15 µF  
0.18 µF  
0.22 µF  
0.27 µF  
0.33 µF  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
7.0 16.0 26.5 22.5  
8.5 17.0 26.5 22.5  
8.5 17.0 26.5 22.5  
R76MD1270--3--  
R76MD1330--3--  
R76MD1390--3--  
R76MD1470--3--  
R76MD1560--3--  
R76MD1680--4--  
R76MD1820--4--  
R76MD2100--4--  
R76MD2120--4--  
R76MD2150--4--  
R76MD2180--4--  
R76MD2220--3--  
R76MD2270--3--  
R76MF2100--0--  
R76MF2120--0--  
R76MF2150--3--  
R76MF2180--3--  
R76MF2220--3--  
R76MF2270--3--  
R76MF2330--3--  
R76MF2390--3--  
R76MF2470--3--  
R76MI 2330--0--  
R76MI 2390--3--  
R76MI 2470--3--  
R76MI 2560--3--  
R76MI 2680--3--  
R76MI 2820--3--  
R76MI 3100--3--  
R76MI 3100--7--  
R76MI 3120--3--  
R76MI 3120--7--  
R76MI 3150--3--  
R76MI 3150--7--  
R76MI 3180--3--  
R76MI 3180--7--  
R76MI 3220--3--  
R76MI 3270--3--  
R76MN3120--3--  
R76MN 3150--3--  
R76MN 3180--3--  
R76MN 3220--3--  
R76MN 3270--3--  
R76MN 3330--3--  
R76MN 3390--3--  
R76MN 3470--3--  
R76MN 3560--3--  
R76MN 3680--3--  
R76MR 3390--3--  
R76MR 3470--3--  
R76MR 3560--3--  
R76MR 3680--3--  
R76MR 3820--3--  
R76MR 4100--4--  
R76MR 4120--4--  
R76MR 4150--3--  
R76MR 4180--3--  
R76MR 4220--3--  
R76MR 4270--3--  
R76MW4100--3--  
R76MW4120--3--  
R76MW4150--3--  
R76MW4180--3--  
R76MW4220--3--  
R76MW4270--3--  
R76MW4330--3--  
R76MW4390--3--  
R76MW4470--3--  
R76MW4560--3--  
R76MW4680--3--  
R76MW4820--3--  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
136 E4  
120 E4  
120 E4  
120 E4  
120 E4  
120 E4  
120 E4  
120 E4  
120 E4  
120 E4  
72 E4  
500  
500  
500  
500  
500  
500  
500  
500  
500  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
300  
180  
180  
180  
180  
180  
180  
180  
180  
180  
180  
180  
180  
40 E4  
40 E4  
40 E4  
40 E4  
40 E4  
40 E4  
40 E4  
40 E4  
40 E4  
24 E4  
24 E4  
24 E4  
24 E4  
24 E4  
24 E4  
24 E4  
24 E4  
24 E4  
24 E4  
24 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
14 E4  
0.39 µF 10.0 18.5 26.5 22.5  
0.47 µF 10.0 18.5 26.5 22.5  
0.56 µF 11.0 20.0 26.5 22.5  
0.68 µF 13.0 22.0 26.5 22.5  
0.39 µF  
0.47 µF  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
0.56 µF 11.0 20.0 32.0 27.5  
0.68 µF 11.0 20.0 32.0 27.5  
0.82 µF 13.0 22.0 32.0 27.5  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
µF 13.0 22.0 32.0 27.5  
µF 14.0 28.0 32.0 27.5  
µF 18.0 33.0 32.0 27.5  
µF 18.0 33.0 32.0 27.5  
µF 22.0 37.0 32.0 27.5  
µF 22.0 37.0 32.0 27.5  
µF 11.0 22.0 41.5 37.5  
µF 13.0 24.0 41.5 37.5  
µF 13.0 24.0 41.5 37.5  
µF 16.0 28.5 41.5 37.5  
µF 19.0 32.0 41.5 37.5  
µF 19.0 32.0 41.5 37.5  
µF 19.0 32.0 41.5 37.5  
µF 20.0 40.0 41.5 37.5  
µF 20.0 40.0 41.5 37.5  
µF 24.0 44.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
6.0 12.0 18.0 15.0  
6.0 12.0 18.0 15.0  
7.5 13.5 18.0 15.0  
9.0 12.5 18.0 15.0  
7.5 13.5 18.0 15.0  
9.0 12.5 18.0 15.0  
8.5 14.5 18.0 15.0  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
72 E4  
72 E4  
72 E4  
72 E4  
72 E4  
72 E4  
72 E4  
72 E4  
72 E4  
72 E4  
0.15 µF 13.0 12.0 18.0 15.0  
0.18 µF 10.0 16.0 18.0 15.0  
0.18 µF 13.0 12.0 18.0 15.0  
0.22 µF 10.0 16.0 18.0 15.0  
0.27 µF 11.0 19.0 18.0 15.0  
72 E4  
Mechanical version and packaging (Table1)  
Internal use  
72 E4  
72 E4  
Tolerance: J (±5%); K (±10%)  
72 E4  
72 E4  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: J (±5%); K (±10%)  
All dimensions are in mm.  
Note: If the working voltage (V) is lower than the rated voltage (Vꢁ), the capacitor may work at higher dv/dt. In this case the  
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vꢁ /V.  
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in  
the above table. The dv/dt test is carried out at 2 times the above values.  
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).  
09/2008  
118  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE:  
R76  
Mꢄx  
dv/dꢆ  
(V/µs)  
2800  
Rꢄꢆed  
cꢄꢁ.  
630Vdꢃ/250Vꢄꢃ*  
Std dimensions  
Mꢄx K0  
pꢄrꢆ Number  
double sided metallized  
polyester carrier film  
b
H
L
p
(V2/µs)  
353 E4  
353 E4  
353 E4  
353 E4  
353 E4  
353 E4  
353 E4  
353 E4  
355 E4  
353 E4  
353 E4  
353 E4  
353 E4  
353 E4  
353 E4  
353 E4  
680 pF  
820 pF  
3.0 8.0 10.0 7.5  
3.0 8.0 10.0 7.5  
3.0 8.0 10.0 7.5  
3.0 8.0 10.0 7.5  
3.0 8.0 10.0 7.5  
3.0 8.0 10.0 7.5  
3.0 8.0 10.0 7.5  
4.0 9.0 10.0 7.5  
4.0 9.0 10.0 7.5  
4.0 9.0 10.0 7.5  
4.0 9.0 10.0 7.5  
4.0 9.0 10.0 7.5  
5.0 10.5 10.0 7.5  
5.0 10.5 10.0 7.5  
6.0 12.0 10.5 7.5  
6.0 12.0 10.5 7.5  
R76PD0680--0--  
R76PD0820--0--  
R76PD1100--0--  
R76PD1120--0--  
R76PD1150--0--  
R76PD1180--0--  
R76PD1220--0--  
R76PD1270--4--  
R76PD1330--4--  
R76PD1390--4--  
R76PD1470--4--  
R76PD1560--4--  
R76PD1680--4--  
R76PD1820--4--  
R76PD2100--3--  
R76PD2120--3--  
polypropylene film  
dielectric  
1 seꢃꢆꢂꢇn  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
2800  
(630Vdꢃ/250Vꢄꢃ)  
1000 pF  
1200 pF  
1500 pF  
1800 pF  
2200 pF  
2700 pF  
3300 pF  
3900 pF  
4700 pF  
5600 pF  
6800 pF  
8200 pF  
0.010 µF  
0.012 µF  
All dimensions are in mm.  
Note: If the working voltage (V) is lower than the rated  
voltage (Vꢁ), the capacitor may work at higher dv/dt.  
In this case the maximum value allowed is obtained  
multiplying the above value (see table dv/dt) with the  
ratio Vꢁ /V.  
The pulse characteristic K0 depends on the voltage  
wave-form and in any case it cannot overcome the  
value given in the above table. The dv/dt test is  
carried out at 2 times the above values.  
Mechanical version and packaging (Table1)  
Internal use  
*Not suitable for across-the-line applications.  
Please refer to Interference Suppression Capacitors (page145)  
Tolerance: J (±5%); K (±10%)  
09/2008  
119  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE:  
R76  
polypropylene film  
dielectric  
double sided metallized  
polyester carrier film  
2 seꢃꢆꢂꢇns  
single sided metallized  
polypropylene film  
(630Vdꢃ/400Vꢄꢃ)  
Rꢄꢆed  
cꢄꢁ.  
630Vdꢃ / 400Vꢄꢃ  
Std dimensions  
Mꢄx  
Mꢄx K0  
pꢄrꢆ Number  
Rꢄꢆed  
cꢄꢁ.  
630Vdꢃ / 400Vꢄꢃ  
Std dimensions  
Mꢄx  
dv/dꢆ  
(V/µs)  
900  
Mꢄx K0  
pꢄrꢆ Number  
dv/dꢆ  
(V/µs)  
3000  
b
H
L
p
(V2/µs)  
378 E4  
378 E4  
378 E4  
378 E4  
378 E4  
378 E4  
378 E4  
378 E4  
378 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
315 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
189 E4  
b
H
L
p
(V2/µs)  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
113 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
56 E4  
3900 pF  
4700 pF  
5600 pF  
6800 pF  
8200 pF  
0.010 µF  
0.012 µF  
0.015 µF  
0.018 µF  
0.012 µF  
0.015 µF  
0.018 µF  
0.022 µF  
0.027 µF  
0.033 µF  
0.039 µF  
0.047 µF  
0.047 µF  
0.056 µF  
0.056 µF  
0.068 µF  
0.068 µF  
0.082 µF  
4.0 9.0 13.0 10.0  
4.0 9.0 13.0 10.0  
4.0 9.0 13.0 10.0  
4.0 9.0 13.0 10.0  
4.0 9.0 13.0 10.0  
5.0 11.0 13.0 10.0  
5.0 11.0 13.0 10.0  
6.0 12.0 13.0 10.0  
6.0 12.0 13.0 10.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
6.0 12.0 18.0 15.0  
6.0 12.0 18.0 15.0  
7.5 13.5 18.0 15.0  
9.0 12.5 18.0 15.0  
7.5 13.5 18.0 15.0  
9.0 12.5 18.0 15.0  
8.5 14.5 18.0 15.0  
9.0 12.5 18.0 15.0  
8.5 14.5 18.0 15.0  
0.15 µF  
0.18 µF  
0.22 µF  
0.27 µF  
0.33 µF 11.0 20.0 32.0 27.5  
0.39 µF 11.0 20.0 32.0 27.5  
0.47 µF 13.0 22.0 32.0 27.5  
0.56 µF 13.0 22.0 32.0 27.5  
0.68 µF 13.0 25.0 32.0 27.5  
0.82 µF 14.0 28.0 32.0 27.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
R76PF1390--0--  
R76PF1470--0--  
R76PF1560--0--  
R76PF1680--0--  
R76PF1820--0--  
R76PF2100--3--  
R76PF2120--3--  
R76PF2150--3--  
R76PF2180--3--  
R76PI 2120--0--  
R76PI 2150--0--  
R76PI 2180--0--  
R76PI 2220--3--  
R76PI 2270--3--  
R76PI 2330--3--  
R76PI 2390--3--  
R76PI 2470--3--  
R76PI 2470--7--  
R76PI 2560--3--  
R76PI 2560--7--  
R76PI 2680--3--  
R76PI 2680--7--  
R76PI 2820--3--  
R76PI 2820--7--  
R76PI 3100--3--  
R76PI 3120--3--  
R76PN 2470--0--  
R76PN 2560--0--  
R76PN 2680--0--  
R76PN 2820--3--  
R76PN 3100--3--  
R76PN 3120--3--  
R76PN 3150--3--  
R76PN 3180--3--  
R76PN 3220--3--  
R76PN 3270--3--  
R76PN 3330--3--  
R76PN 3390--3--  
R76PR 3150--3--  
R76PR 3180--3--  
R76PR 3220--3--  
R76PR 3270--3--  
R76PR 3330--4--  
R76PR 3390--3--  
R76PR 3470--3--  
R76PR 3560--3--  
R76PR 3680--4--  
R76PR 3820--3--  
R76PR 4100--3--  
R76PR 4120--3--  
R76PR 4150--3--  
R76PR 4180--3--  
R76PW3330--3--  
R76PW3390--3--  
R76PW3470--3--  
R76PW3560--3--  
R76PW3680--3--  
R76PW3820--3--  
R76PW4100--3--  
R76PW4120--3--  
R76PW4150--3--  
R76PW4180--3--  
R76PW4220--3--  
R76PW4270--3--  
R76PW4330--3--  
R76PW4390--3--  
R76PW4470--3--  
R76PW4560--3--  
3000  
3000  
3000  
3000  
3000  
3000  
3000  
3000  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
2500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
900  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
1.0  
1.2  
1.5  
1.8  
µF 18.0 33.0 32.0 27.5  
µF 18.0 33.0 32.0 27.5  
µF 22.0 37.0 32.0 27.5  
µF 22.0 37.0 32.0 27.5  
0.33 µF 11.0 22.0 41.5 37.5  
0.39 µF 11.0 22.0 41.5 37.5  
0.47 µF 11.0 22.0 41.5 37.5  
0.56 µF 11.0 22.0 41.5 37.5  
0.68 µF 11.0 22.0 41.5 37.5  
0.82 µF 13.0 24.0 41.5 37.5  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
µF 16.0 28.5 41.5 37.5  
µF 16.0 28.5 41.5 37.5  
µF 16.0 28.5 41.5 37.5  
µF 19.0 32.0 41.5 37.5  
µF 20.0 40.0 41.5 37.5  
µF 20.0 40.0 41.5 37.5  
µF 24.0 44.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
0.082 µF 13.0 12.0 18.0 15.0  
0.10 µF 10.0 16.0 18.0 15.0  
0.12 µF 11.0 19.0 18.0 15.0  
0.047 µF  
0.056 µF  
0.068 µF  
0.082 µF  
0.10 µF  
0.12 µF  
0.15 µF  
0.18 µF  
0.22 µF 10.0 18.5 26.5 22.5  
0.27 µF 11.0 20.0 26.5 22.5  
0.33 µF 11.0 20.0 26.5 22.5  
0.39 µF 13.0 22.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
7.0 16.0 26.5 22.5  
8.5 17.0 26.5 22.5  
8.5 17.0 26.5 22.5  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%); J (±5%); K (±10%)  
All dimensions are in mm.  
Note: If the working voltage (V) is lower than the rated  
voltage (Vꢁ), the capacitor may work at higher dv/dt.  
In this case the maximum value allowed is obtained  
multiplying the above value (see table dv/dt) with the  
ratio Vꢁ /V.  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%); J (±5%); K (±10%)  
The pulse characteristic K0 depends on the voltage  
wave-form and in any case it cannot overcome the  
value given in the above table. The dv/dt test is  
carried out at 2 times the above values.  
09/2008  
120  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
Mꢄx  
dv/dꢆ  
(V/µs)  
Rꢄꢆed  
cꢄꢁ.  
polypropylene film  
1000Vdꢃ / 400Vꢄꢃ  
Std dimensions  
Mꢄx K0  
pꢄrꢆ Number  
double sided metallized  
dielectric  
(V2/µs)  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
1200 E4  
polyester carrier film  
b
H
L
p
220 pF  
270 pF  
330 pF  
390 pF  
470 pF  
560 pF  
680 pF  
820 pF  
1000 pF  
1200 pF  
1500 pF  
1800 pF  
2200 pF  
2700 pF  
3300 pF  
3.0 8.0 10.0 7.5 6000  
3.0 8.0 10.0 7.5 6000  
3.0 8.0 10.0 7.5 6000  
3.0 8.0 10.0 7.5 6000  
3.0 8.0 10.0 7.5 6000  
3.0 8.0 10.0 7.5 6000  
4.0 9.0 10.0 7.5 6000  
4.0 9.0 10.0 7.5 6000  
4.0 9.0 10.0 7.5 6000  
4.0 9.0 10.0 7.5 6000  
5.0 10.5 10.0 7.5 6000  
5.0 10.5 10.0 7.5 6000  
5.0 10.5 10.0 7.5 6000  
6.0 12.0 10.5 7.5 6000  
6.0 12.0 10.5 7.5 6000  
R76QD0220--0--  
R76QD0270--0--  
R76QD0330--0--  
R76QD0390--0--  
R76QD0470--0--  
R76QD0560--0--  
R76QD0680--4--  
R76QD0820--4--  
R76QD 1100--4--  
R76QD 1120--4--  
R76QD 1150--4--  
R76QD 1180--4--  
R76QD1220--4--  
R76QD1270--0--  
R76QD1330--0--  
single sided metallized  
polypropylene film  
2 seꢃꢆꢂꢇns  
(1000Vdꢃ)  
All dimensions are in mm.  
Note: If the working voltage (V) is lower than the rated voltage  
(Vꢁ), the capacitor may work at higher dv/dt. In this case the  
maximum value allowed is obtained multiplying the above  
value (see table dv/dt) with the ratio Vꢁ /V.  
The pulse characteristic K0 depends on the voltage wave-  
form and in any case it cannot overcome the value given in  
the above table. The dv/dt test is carried out at 2 times the  
above values.  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%)*; J (±5%); K (±10%)  
* Tolerance H (+2.5%) for C ≥1000pF  
09/2008  
121  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
polypropylene film  
dielectric  
double sided metallized  
polyester carrier film  
single sided metallized  
polypropylene film  
2 seꢃꢆꢂꢇns  
(1000Vdꢃ)  
Mꢄx  
dv/dꢆ  
Mꢄx  
dv/dꢆ  
(V/µs)  
1000  
Rꢄꢆed  
cꢄꢁ.  
Rꢄꢆed  
cꢄꢁ.  
1000Vdꢃ / 600Vꢄꢃ  
Std dimensions  
1000Vdꢃ / 600Vꢄꢃ  
Std dimensions  
Mꢄx K0  
pꢄrꢆ Number  
Mꢄx K0  
pꢄrꢆ Number  
b
H
L
p
(V/µs)  
(V2/µs)  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
960 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
660 E4  
420 E4  
420 E4  
420 E4  
420 E4  
420 E4  
420 E4  
420 E4  
420 E4  
420 E4  
420 E4  
b
H
L
p
(V2/µs)  
200 E4  
200 E4  
200 E4  
200 E4  
200 E4  
200 E4  
200 E4  
200 E4  
200 E4  
200 E4  
200 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
100 E4  
470 pF 4.0 9.0 13.0 10.0 4800  
560 pF 4.0 9.0 13.0 10.0 4800  
680 pF 4.0 9.0 13.0 10.0 4800  
820 pF 4.0 9.0 13.0 10.0 4800  
1000 pF 4.0 9.0 13.0 10.0 4800  
1200 pF 4.0 9.0 13.0 10.0 4800  
1500 pF 4.0 9.0 13.0 10.0 4800  
1800 pF 4.0 9.0 13.0 10.0 4800  
2200 pF 4.0 9.0 13.0 10.0 4800  
2700 pF 4.0 9.0 13.0 10.0 4800  
3300 pF 4.0 9.0 13.0 10.0 4800  
3900 pF 5.0 11.0 13.0 10.0 4800  
4700 pF 5.0 11.0 13.0 10.0 4800  
5600 pF 6.0 12.0 13.0 10.0 4800  
0.10 µF  
0.12 µF  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
R76QF 0470--0--  
R76QF 0560--0--  
R76QF 0680--0--  
R76QF 0820--0--  
R76QF 1100--0--  
R76QF 1120--0--  
R76QF 1150--0--  
R76QF 1180--0--  
R76QF 1220--0--  
R76QF 1270--0--  
R76QF 1330--3--  
R76QF 1390--3--  
R76QF 1470--3--  
R76QF 1560--3--  
R76QF 1680--3--  
R76QI 1820--4--  
R76QI 1820--0--  
R76QI 2100--4--  
R76QI 2100--3--  
R76QI 2120--3--  
R76QI 2150--4--  
R76QI 2180--4--  
R76QI 2220--4--  
R76QI 2220--7--  
R76QI 2270--4--  
R76QI 2270--7--  
R76QI 2330--4--  
R76QI 2330--7--  
R76QI 2390--4--  
R76QI 2470--4--  
R76QN 2270--0--  
R76QN 2330--3--  
R76QN 2390--3--  
R76QN 2470--3--  
R76QN 2560--3--  
R76QN 2680--3--  
R76QN 2820--3--  
R76QN 3100--3--  
R76QN 3120--3--  
R76QN 3150--3--  
R76QR 3100--4--  
R76QR 3120--4--  
R76QR 3150--3--  
R76QR 3180--3--  
R76QR 3220--3--  
R76QR 3270--4--  
R76QR 3330--3--  
R76QR 3390--3--  
R76QR 3470--3--  
R76QR 3560--3--  
R76QR 3680--3--  
R76QW 3180--3--  
R76QW 3220--3--  
R76QW 3270--3--  
R76QW 3330--3--  
R76QW 3390--3--  
R76QW 3470--3--  
R76QW 3560--3--  
R76QW 3680--3--  
R76QW 3820--3--  
R76QW 4100--3--  
R76QW 4120--3--  
R76QW 4150--3--  
R76QW 4180--3--  
R76QW 4220--3--  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
500  
0.15 µF 11.0 20.0 32.0 27.5  
0.18 µF 13.0 22.0 32.0 27.5  
0.22 µF 13.0 22.0 32.0 27.5  
0.27 µF 13.0 25.0 32.0 27.5  
0.33 µF 14.0 28.0 32.0 27.5  
0.39 µF 18.0 33.0 32.0 27.5  
0.47 µF 18.0 33.0 32.0 27.5  
0.56 µF 22.0 37.0 32.0 27.5  
0.68 µF 22.0 37.0 32.0 27.5  
0.18 µF 11.0 22.0 41.5 37.5  
0.22 µF 11.0 22.0 41.5 37.5  
0.27 µF 13.0 24.0 41.5 37.5  
0.33 µF 13.0 24.0 41.5 37.5  
0.39 µF 16.0 28.5 41.5 37.5  
0.47 µF 16.0 28.5 41.5 37.5  
0.56 µF 16.0 28.5 41.5 37.5  
0.68 µF 19.0 32.0 41.5 37.5  
0.82 µF 20.0 40.0 41.5 37.5  
500  
500  
6800 pF  
6.0 12.0 13.0 10.0 4800  
500  
8200 pF 4.0 10.0 18.0 15.0 3300  
8200 pF 5.0 11.0 18.0 15.0 3300  
500  
500  
0.010 µF  
0.010 µF  
0.012 µF  
0.015 µF  
0.018 µF  
0.022 µF  
0.022 µF  
0.027 µF  
0.027 µF  
0.033 µF  
4.0 10.0 18.0 15.0 3300  
5.0 11.0 18.0 15.0 3300  
5.0 11.0 18.0 15.0 3300  
5.0 11.0 18.0 15.0 3300  
5.0 11.0 18.0 15.0 3300  
6.0 12.0 18.0 15.0 3300  
9.0 12.5 18.0 15.0 3300  
7.5 13.5 18.0 15.0 3300  
9.0 12.5 18.0 15.0 3300  
7.5 13.5 18.0 15.0 3300  
500  
500  
500  
1.0  
1.2  
1.5  
1.8  
2.2  
µF 20.0 40.0 41.5 37.5  
µF 24.0 44.0 41.5 37.5  
µF 24.0 44.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
500  
500  
500  
500  
500  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%)*; J (±5%); K (±10%)  
0.033 µF 13.0 12.0 18.0 15.0 3300  
0.039 µF  
0.047 µF  
0.027 µF  
0.033 µF  
0.039 µF  
0.047 µF  
0.056 µF  
0.068 µF  
8.5 14.5 18.0 15.0 3300  
8.5 14.5 18.0 15.0 3300  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
7.0 16.0 26.5 22.5  
7.0 16.0 26.5 22.5  
8.5 17.0 26.5 22.5  
2100  
2100  
2100  
2100  
2100  
2100  
2100  
2100  
2100  
2100  
All dimensions are in mm.  
Note: If the working voltage (V) is lower than the rated  
voltage (Vꢁ), the capacitor may work at higher dv/dt.  
In this case the maximum value allowed is obtained  
multiplying the above value (see table dv/dt) with the  
ratio Vꢁ /V.  
0.082 µF 10.0 18.5 26.5 22.5  
0.10 µF 10.0 18.5 26.5 22.5  
0.12 µF 11.0 20.0 26.5 22.5  
0.15 µF 13.0 22.0 26.5 22.5  
The pulse characteristic K0 depends on the voltage  
wave-form and in any case it cannot overcome the  
value given in the above table. The dv/dt test is  
carried out at 2 times the above values.  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%)*; J (±5%); K (±10%)  
* Tolerance H (+2.5%) for C ≥1000pF  
09/2008  
122  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
polypropylene film  
dielectric  
double sided metallized  
polyester carrier film  
single sided metallized  
polypropylene film  
2 seꢃꢆꢂꢇns  
(1600Vdꢃ)  
Mꢄx  
Mꢄx  
dv/dꢆ  
Rꢄꢆed  
cꢄꢁ.  
1600Vdꢃ / 650Vꢄꢃ  
Std dimensions  
Rꢄꢆed  
cꢄꢁ.  
1600Vdꢃ / 650Vꢄꢃ  
Std dimensions  
Mꢄx K0  
pꢄrꢆ Number  
Mꢄx K0  
pꢄrꢆ Number  
dv/dꢆ  
(V/µs)  
3000  
3000  
3000  
3000  
3000  
3000  
3000  
3000  
3000  
3000  
3000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
1200  
(V2/µs)  
b
H
L
p
(V/µs)  
(V2/µs)  
b
H
L
p
0.015 µF  
0.018 µF  
0.022 µF  
0.027 µF  
0.033 µF  
0.039 µF  
0.047 µF  
0.056 µF  
0.068 µF 10.0 18.5 26.5 22.5  
0.082 µF 10.0 18.5 26.5 22.5  
0.10 µF 11.0 20.0 26.5 22.5  
0.039 µF  
0.047 µF  
0.056 µF  
0.068 µF  
0.082 µF 11.0 20.0 32.0 27.5  
0.10 µF 11.0 20.0 32.0 27.5  
0.12 µF 13.0 22.0 32.0 27.5  
0.15 µF 13.0 25.0 32.0 27.5  
0.18 µF 14.0 28.0 32.0 27.5  
0.22 µF 18.0 33.0 32.0 27.5  
0.27 µF 18.0 33.0 32.0 27.5  
0.33 µF 18.0 33.0 32.0 27.5  
0.39 µF 22.0 37.0 32.0 27.5  
0.47 µF 22.0 37.0 32.0 27.5  
0.082 µF 11.0 22.0 41.5 37.5  
0.10 µF 11.0 22.0 41.5 37.5  
0.12 µF 11.0 22.0 41.5 37.5  
0.15 µF 11.0 22.0 41.5 37.5  
0.18 µF 13.0 24.0 41.5 37.5  
0.22 µF 13.0 24.0 41.5 37.5  
0.27 µF 13.0 24.0 41.5 37.5  
0.33 µF 16.0 28.5 41.5 37.5  
0.39 µF 16.0 28.5 41.5 37.5  
0.47 µF 19.0 32.0 41.5 37.5  
0.56 µF 20.0 40.0 41.5 37.5  
0.68 µF 20.0 40.0 41.5 37.5  
0.82 µF 24.0 44.0 41.5 37.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
7.0 16.0 26.5 22.5  
7.0 16.0 26.5 22.5  
8.5 17.0 26.5 22.5  
960 E4 R76TN 2150--3--  
960 E4 R76TN 2180--3--  
960 E4 R76TN 2220--3--  
960 E4 R76TN 2270--3--  
960 E4 R76TN 2330--4--  
960 E4 R76TN 2390--4--  
960 E4 R76TN 2470--4--  
960 E4 R76TN 2560--4--  
960 E4 R76TN 2680--4--  
960 E4 R76TN 2820--4--  
960 E4 R76TN 3100--4--  
640 E4 R76TR 2390--3--  
640 E4 R76TR 2470--3--  
640 E4 R76TR 2560--3--  
640 E4 R76TR 2680--3--  
640 E4 R76TR 2820--3--  
640 E4 R76TR 3100--3--  
640 E4 R76TR 3120--3--  
640 E4 R76TR 3150--4--  
640 E4 R76TR 3180--4--  
640 E4 R76TR 3220--3--  
640 E4 R76TR 3270--3--  
640 E4 R76TR 3330--3--  
640 E4 R76TR 3390--3--  
640 E4 R76TR 3470--3--  
384 E4 R76TW 2820--3--  
384 E4 R76TW 3100--3--  
384 E4 R76TW 3120--3--  
384 E4 R76TW 3150--3--  
384 E4 R76TW 3180--3--  
384 E4 R76TW 3220--3--  
384 E4 R76TW 3270--3--  
384 E4 R76TW 3330--3--  
384 E4 R76TW 3390--3--  
384 E4 R76TW 3470--3--  
384 E4 R76TW 3560--3--  
384 E4 R76TW 3680--3--  
384 E4 R76TW 3820--3--  
384 E4 R76TW 4100--3--  
384 E4 R76TW 4120--3--  
3300 pF  
3300 pF  
3900 pF  
3900 pF  
4700 pF  
4700 pF  
5600 pF  
5600 pF  
6800 pF  
8200 pF  
0.010 µF  
0.012 µF  
0.015 µF  
0.018 µF  
0.018 µF  
0.022 µF  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
6.0 12.0 18.0 15.0  
6.0 12.0 18.0 15.0  
7.5 13.5 18.0 15.0  
9.0 12.5 18.0 15.0  
7.5 13.5 18.0 15.0  
6000 1900 E4 R76TI1330--4--  
6000 1900 E4 R76TI1330--3--  
6000 1900 E4 R76TI1390--4--  
6000 1900 E4 R76TI1390--3--  
6000 1900 E4 R76TI1470--4--  
6000 1900 E4 R76TI1470--3--  
6000 1900 E4 R76TI1560--4--  
6000 1900 E4 R76TI1560--3--  
6000 1900 E4 R76TI1680--3--  
6000 1900 E4 R76TI1820--4--  
6000 1900 E4 R76TI2100--4--  
6000 1900 E4 R76TI2120--4--  
6000 1900 E4 R76TI2150--4--  
6000 1900 E4 R76TI2180--4--  
6000 1900 E4 R76TI2180--7--  
6000 1900 E4 R76TI2220--4--  
6000 1900 E4 R76TI2220--7--  
6000 1900 E4 R76TI2270--4--  
6000 1900 E4 R76TI2330--4--  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
0.022 µF 13.0 12.0 18.0 15.0  
0.027 µF  
0.033 µF  
8.5 14.5 18.0 15.0  
8.5 14.5 18.0 15.0  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%); J (±5%); K (±10%)  
1.0  
1.2  
µF 24.0 44.0 41.5 37.5  
µF 30.0 45.0 41.5 37.5  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%); J (±5%); K (±10%)  
All dimensions are in mm.  
Note: If the working voltage (V) is lower than the rated voltage (Vꢁ), the capacitor may work at higher dv/dt. In this  
case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vꢁ /V. The pulse  
characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table.  
The dv/dt test is carried out at 2 times the above values.  
09/2008  
123  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
polypropylene film  
dielectric  
double sided metallized  
polyester carrier film  
single sided metallized  
polypropylene film  
2 seꢃꢆꢂꢇns  
(2000Vdꢃ)  
Mꢄx  
dv/dꢆ  
(V/µs)  
Mꢄx  
dv/dꢆ  
Rꢄꢆed  
cꢄꢁ.  
2000Vdꢃ / 700Vꢄꢃ  
Std dimensions  
Rꢄꢆed  
cꢄꢁ.  
2000Vdꢃ / 700Vꢄꢃ  
Std dimensions  
Mꢄx K0  
pꢄrꢆ Number  
Mꢄx K0  
pꢄrꢆ Number  
(V2/µs)  
b
H
L
p
(V/µs)  
(V2/µs)  
b
H
L
p
100 pF  
120 pF  
150 pF  
180 pF  
220 pF  
220 pF  
270 pF  
270 pF  
330 pF  
330 pF  
390 pF  
390 pF  
470 pF  
470 pF  
560 pF  
560 pF  
680 pF  
680 pF  
820 pF  
820 pF  
1000 pF  
1000 pF  
1200 pF  
1200 pF  
1500 pF  
1500 pF  
1800 pF  
1800 pF  
2200 pF  
2200 pF  
2700 pF  
2700 pF  
3300 pF  
3900 pF  
4700 pF  
5600 pF  
6800 pF  
8200 pF  
0.010 µF  
4.0 10.0 18.0 15.0  
4.0 10.0 18.0 15.0  
4.0 10.0 18.0 15.0  
4.0 10.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
4.0 10.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
6.0 12.0 18.0 15.0  
6.0 12.0 18.0 15.0  
6.0 12.0 18.0 15.0  
7.5 13.5 18.0 15.0  
9500 3800 E4 R76UI 0100--4--  
9500 3800 E4 R76UI 0120--4--  
9500 3800 E4 R76UI 0150--4--  
9500 3800 E4 R76UI 0180--4--  
9500 3800 E4 R76UI 0220--4--  
9500 3800 E4 R76UI 0220--0--  
9500 3800 E4 R76UI 0270--4--  
9500 3800 E4 R76UI 0270--0--  
9500 3800 E4 R76UI 0330--4--  
9500 3800 E4 R76UI 0330--0--  
9500 3800 E4 R76UI 0390--4--  
9500 3800 E4 R76UI 0390--0--  
9500 3800 E4 R76UI 0470--4--  
9500 3800 E4 R76UI 0470--0--  
9500 3800 E4 R76UI 0560--4--  
9500 3800 E4 R76UI 0560--0--  
9500 3800 E4 R76UI 0680--4--  
9500 3800 E4 R76UI 0680--0--  
9500 3800 E4 R76UI 0820--4--  
9500 3800 E4 R76UI 0820--0--  
9500 3800 E4 R76UI 1100--4--  
9500 3800 E4 R76UI 1100--3--  
9500 3800 E4 R76UI 1120--4--  
9500 3800 E4 R76UI 1120--3--  
9500 3800 E4 R76UI 1150--4--  
9500 3800 E4 R76UI 1150--3--  
9500 3800 E4 R76UI 1180--4--  
9500 3800 E4 R76UI 1180--3--  
9500 3800 E4 R76UI 1220--4--  
9500 3800 E4 R76UI 1220--3--  
9500 3800 E4 R76UI 1270--4--  
9500 3800 E4 R76UI 1270--3--  
9500 3800 E4 R76UI 1330--4--  
9500 3800 E4 R76UI 1390--4--  
9500 3800 E4 R76UI 1470--4--  
9500 3800 E4 R76UI 1560--4--  
9500 3800 E4 R76UI 1680--4--  
9500 3800 E4 R76UI 1820--4--  
9500 3800 E4 R76UI 2100--4--  
9500 3800 E4 R76UI 2100--7--  
9500 3800 E4 R76UI 2120--4--  
9500 3800 E4 R76UI 2150--4--  
1000 pF  
1200 pF  
1500 pF  
1800 pF  
2200 pF  
2700 pF  
3300 pF  
3900 pF  
4700 pF  
5600 pF  
6800 pF  
8200 pF  
0.010 µF  
0.012 µF  
0.015 µF  
0.018 µF  
0.022 µF  
0.027 µF  
0.033 µF  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
7.0 16.0 26.5 22.5  
7.0 16.0 26.5 22.5  
8.5 17.0 26.5 22.5  
3500 1400 E4 R76UN1100--0--  
3500 1400 E4 R76UN1120--0--  
3500 1400 E4 R76UN1150--0--  
3500 1400 E4 R76UN1180--0--  
3500 1400 E4 R76UN1220--0--  
3500 1400 E4 R76UN1270--0--  
3500 1400 E4 R76UN1330--0--  
3500 1400 E4 R76UN1390--0--  
3500 1400 E4 R76UN1470--0--  
3500 1400 E4 R76UN1560--0--  
3500 1400 E4 R76UN1680--0--  
3500 1400 E4 R76UN1820--3--  
3500 1400 E4 R76UN2100--3--  
3500 1400 E4 R76UN2120--3--  
3500 1400 E4 R76UN2150--4--  
3500 1400 E4 R76UN2180--4--  
3500 1400 E4 R76UN2220--4--  
3500 1400 E4 R76UN2270--4--  
3500 1400 E4 R76UN2330--4--  
3500 1400 E4 R76UN2390--4--  
3500 1400 E4 R76UN2470--4--  
3500 1400 E4 R76UN2560--4--  
0.039 µF 10.0 18.0 26.5 22.5  
0.047 µF 10.0 18.0 26.5 22.5  
0.056 µF 11.0 20.0 26.5 22.5  
0.022 µF  
0.027 µF  
0.033 µF  
0.039 µF  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
2300  
2300  
2300  
2300  
2300  
2300  
2300  
2300  
2300  
2300  
2300  
2300  
2300  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
1500  
920 E4 R76UR 2220--3--  
920 E4 R76UR 2270--3--  
920 E4 R76UR 2330--3--  
920 E4 R76UR 2390--4--  
920 E4 R76UR 2470--3--  
920 E4 R76UR 2560--3--  
920 E4 R76UR 2680--3--  
920 E4 R76UR 2820--4--  
920 E4 R76UR 3100--3--  
920 E4 R76UR 3120--3--  
920 E4 R76UR 3150--3--  
920 E4 R76UR 3180--3--  
920 E4 R76UR 3220--3--  
600 E4 R76UW2330--3--  
600 E4 R76UW2390--3--  
600 E4 R76UW2470--3--  
600 E4 R76UW2560--3--  
600 E4 R76UW2680--3--  
600 E4 R76UW2820--3--  
600 E4 R76UW3100--3--  
600 E4 R76UW3120--3--  
600 E4 R76UW3150--3--  
600 E4 R76UW3180--3--  
600 E4 R76UW3220--3--  
600 E4 R76UW3270--3--  
600 E4 R76UW3330--3--  
600 E4 R76UW3390--3--  
600 E4 R76UW3470--3--  
600 E4 R76UW3560--3--  
600 E4 R76UW3680--3--  
0.047 µF 11.0 20.0 32.0 27.5  
0.056 µF 13.0 22.0 32.0 27.5  
0.068 µF 13.0 22.0 32.0 27.5  
0.082 µF 13.0 25.0 32.0 27.5  
0.10 µF 14.0 28.0 32.0 27.5  
0.12 µF 18.0 33.0 32.0 27.5  
0.15 µF 18.0 33.0 32.0 27.5  
0.18 µF 22.0 37.0 32.0 27.5  
0.22 µF 22.0 37.0 32.0 27.5  
0.033 µF 11.0 22.0 41.5 37.5  
0.039 µF 11.0 22.0 41.5 37.5  
0.047 µF 11.0 22.0 41.5 37.5  
0.056 µF 11.0 22.0 41.5 37.5  
0.068 µF 11.0 22.0 41.5 37.5  
0.082 µF 11.0 22.0 41.5 37.5  
0.10 µF 13.0 24.0 41.5 37.5  
0.12 µF 13.0 24.0 41.5 37.5  
0.15 µF 16.0 28.5 41.5 37.5  
0.18 µF 16.0 28.5 41.5 37.5  
0.22 µF 19.0 32.0 41.5 37.5  
0.27 µF 20.0 40.0 41.5 37.5  
0.33 µF 20.0 40.0 41.5 37.5  
0.39 µF 24.0 44.0 41.5 37.5  
0.47 µF 24.0 44.0 41.5 37.5  
0.56 µF 30.0 45.0 41.5 37.5  
0.68 µF 30.0 45.0 41.5 37.5  
0.010 µF 13.0 12.0 18.0 15.0  
0.012 µF  
0.015 µF  
8.5 14.5 18.0 15.0  
8.5 14.5 18.0 15.0  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%)*; (J (±5%); K (±10%)  
All dimensions are in mm  
Note: If the working voltage (V) is lower than the rated  
voltage (Vꢁ), the capacitor may work at higher dv/dt.  
In this case the maximum value allowed is obtained  
multiplying the above value (see table dv/dt) with the  
ratio Vꢁ /V. The pulse characteristic K0 depends on the  
voltage wave-form and in any case it cannot overcome  
the value given in the above table. The dv/dt test is  
carried out at 2 times the above values.  
Mechanical version and packaging (Table1)  
Internal use  
Tolerance: H (±2.5%); (J (±5%); K (±10%)  
**Tolerance H (±2.5%) for C ≥1000pF  
09/2008  
124  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
ElEctRical cHaRactERiSticS  
tESt MEtHoD aND pERFoRMaNcE  
Rꢄꢆed vꢇꢅꢆꢄge (VR):  
250Vdc - 0400Vdc - 630Vdc  
630Vdc - 1000Vdc - 1600Vdc - 2000Vdc  
Dꢄmꢁ heꢄꢆ, sꢆeꢄdꢀ sꢆꢄꢆe:  
tesꢆ ꢃꢇndꢂꢆꢂꢇns  
for 1 section  
for 2 sections.  
Temperature:  
+40°C±2°C  
93% ±2%  
56 days  
Relative humidity (RH):  
Test duration:  
Rꢄꢆed ꢆemꢁerꢄꢆure (tR):  
+85°C for Vꢁ (d.c.)  
perfꢇrmꢄnꢃe  
+75°C for Vꢁ (a.c.)  
Capacitance change |∆C/C|: ≤2%  
temꢁerꢄꢆure derꢄꢆed vꢇꢅꢆꢄge:  
The following decreasing factor has to be applied on the  
rated voltage:  
+85°C to +105°C: 1.25% per °C for Vꢁ (d.c.).  
+75°C to +105°C: 1.35% per °C for Vꢁ (a.c.)  
DF change (∆tgδ):  
Insulation resistance:  
≤10x10-4 at 1kHz  
≥50% of initial limit.  
Endurꢄnꢃe:  
tesꢆ ꢃꢇndꢂꢆꢂꢇns  
Temperature:  
Test duration:  
Voltage applied:  
+85°C±2°C  
2000 h  
1.25xVꢁ (d.c.)  
cꢄꢁꢄꢃꢂꢆꢄnꢃe rꢄnge:  
680pF to 15µF  
100pF to 5.6µF  
1 section  
2 sections  
perfꢇrmꢄnꢃe  
cꢄꢁꢄꢃꢂꢆꢄnꢃe vꢄꢅues:  
E12 series (IEC 60063 Norm).  
Capacitance change |∆C/C|: ≤2%  
DF change (∆tgδ):≤10x10-4 at 110kHz for C≤1µF  
≤10x10-4 at 111kHz for C>1µF  
cꢄꢁꢄꢃꢂꢆꢄnꢃe ꢆꢇꢅerꢄnꢃes (measured at 1 kHz):  
Insulation resistance:  
≥50% of initial limit.  
±5% (J); ±10% (K)  
±2.5% (H); ±5% (J); ±10% (K);  
for C<1000pF  
for C≥1000pF  
Resꢂsꢆꢄnꢃe ꢆꢇ sꢇꢅderꢂng heꢄꢆ:  
tꢇꢆꢄꢅ seꢅf-ꢂnduꢃꢆꢄnꢃe (L):  
tesꢆ ꢃꢇndꢂꢆꢂꢇns  
(Lead length ~2 mm)  
Solder bath temperature:  
+260°C±5°C  
Dipping time (with heat screen):10 s±1 s  
Pitch (mm)  
L (nH) ≈  
7.5  
8
10  
9
15  
10  
22.5  
18  
27.5  
18  
37.5  
20  
perfꢇrmꢄnꢃe  
Capacitance change |∆C/C|: ≤1%  
DF change (∆tgδ):≤10x10-4 at 110kHz for C≤1µF  
Dꢂssꢂꢁꢄꢆꢂꢇn fꢄꢃꢆꢇr (DF):  
tgδx10-4 at +25°C ±5°C  
≤10x10-4 at 111kHz for C>1µF  
Insulation resistance:  
≥initial limit.  
kHz  
C≤0.1µF  
0.1µF<C≤1.0µF  
C>1µF  
lꢇng ꢆerm sꢆꢄbꢂꢅꢂꢆꢀ (after two years):  
1
10  
100  
≤030  
≤04  
≤15  
≤3  
≤6  
≤4  
Sꢆꢇrꢄge: standard environmental conditions (see page 12).  
perfꢇrmꢄnꢃe  
Capacitance change |∆C/C|: ≤0.5%  
insuꢅꢄꢆꢂꢇn resꢂsꢆꢄnꢃe:  
tesꢆ ꢃꢇndꢂꢆꢂꢇns  
Temperature:  
+25°C±5°C  
Voltage charge time:  
Voltage charge:  
1 min  
100Vdc  
perfꢇrmꢄnꢃe  
≥1x105 MΩ for C≤0.33µF  
(5x105 MΩ)*  
≥30000 s  
* Typical value.  
for C>0.33µF  
(150000 s)*  
tesꢆ vꢇꢅꢆꢄge beꢆween ꢆermꢂnꢄꢆꢂꢇns:  
1.6xVꢁ applied for 2 s at +25°C±5°C  
09/2008  
125  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)  
Note: p (pitch) in mm.  
09/2008  
126  
R76  
MMKP Series  
polypRopylENE capacitoR WitH DoUBlE  
SiDED MEtalliZED FilM ElEctRoDES D.c. aND  
pUlSE applicatioNS  
PRODUCT CODE: R76  
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)  
Note: p (pitch) in mm.  
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –  
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who  
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise  
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.  

R76PN3120XX3XX 相关器件

型号 制造商 描述 价格 文档
R76PN3150403K KEMET CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.15 uF, THROUGH HOLE MOUNT, RADIAL LEADED 获取价格
R76PN3150503H KEMET CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.15 uF, THROUGH HOLE MOUNT, RADIAL LEADED 获取价格
R76PN3150CK3K KEMET CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.15 uF, THROUGH HOLE MOUNT, RADIAL LEADED 获取价格
R76PN3150SE30J KEMET Film Capacitor, Polypropylene, 630V, 5% +Tol, 5% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT 获取价格
R76PN3150SE30K KEMET Film Capacitor, Polypropylene, 630V, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT 获取价格
R76PN3150XX3XX KEMET POLYPROPYLENE CAPACITOR WITH DOUBLE SIDED METALLIZED FILM ELECTRODES 获取价格
R76PN3180403H KEMET CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.18 uF, THROUGH HOLE MOUNT, RADIAL LEADED 获取价格
R76PN3180CK3J KEMET CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.18 uF, THROUGH HOLE MOUNT, RADIAL LEADED 获取价格
R76PN3180DQ3K KEMET CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630 V, 0.18 uF, THROUGH HOLE MOUNT, RADIAL LEADED 获取价格
R76PN3180SE30J KEMET Film Capacitor, Polypropylene, 630V, 5% +Tol, 5% -Tol, 0.18uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT 获取价格

R76PN3120XX3XX 相关文章

  • AMD 新专利：开启解决多芯粒 GPU 延迟新局面
    2025-07-15
    5
  • 超级电容器与锂离子电池：从原理到应用的区别
    2025-07-15
    9
  • 全球最小 MCU：尺寸、性能与应用全解析
    2025-07-15
    12
  • I2C 走向末路，I3C 开启芯片通信新时代
    2025-07-14
    22

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 数据手册
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286