MIL PRF 32535 BME X7R MLCC
Defense Logistics Agency Approved
KYOCERA AVX has been approved by the Defense Logistics Agency (DLA) for its qualification of its Mil Prf 32535 BME
X7R MLCC technology. Using its leading edge technology KYOCERA AVX can now offer Mil Prf 32535 approved
capacitors from 0402 to 2220 case sizes. With capacitance & voltage ranges ranging from 2.2nF to 22μF, 16–100
volts, currently. KYOCERA AVXs Mil Prf 32535 meets the designer needs by boosting the CV range compared to the
standard surface mount Mil Ranges and reduces the gap between commercial and Mil Spec product ranges while
meeting the Mil reliability levels. The results of this technology has several key benefits for the Mil design engineer
resulting in , ability to downsize case sizes, reducing PCB weight and allowing more efficient use of the PCB area
available with the higher CV MLCCs. These surface mount components also incorporate Flexiterm®, which greatly
enhances resistance to any of the thermo-mechanical stress experienced by MLCCs during PCB assembly and
during its life time.
FEATURES
• “M” and “T” reliability levels available.
• Higher CV capability than standard Mil based capacitors resulting in reduced size/weight of components and saving in PCB space required.
• Flexiterm® technology used as standard in range for enhanced thermo-mechanical stress resistance.
• Case sizes 0402-2220, cap values 2.2nF–22.0μF available.
• Voltages 16-100 Volts
HOW TO ORDER
M32535
08
E2
Z
226
K
R
M
B
Mil Spec
Slash Sheet
Characteristic
E2
(X7R ± 15%)
Voltage
Y = 16V
Z = 25V
A = 50V
B = 100V
Capacitance
682 = 6.8nF
103 = 10nF
474 = 470nF
475 = 4.7μF
226 = 22μF
Tolerance
J = ±5%
K = ±10%
M = ±20%
Termination
R = Expoxy
Ni Sn/Pb
Product Level
M = Standard
T = Space Level
Electrode
M32535
B = BME
Number
02 = 0402
03 = 0603
04 = 0805
05 = 1206
06 = 1210
07 = 1812
08 = 2220
Packaging, Waffle as standard, for Tape and Reel add \1 to end of the part number, e.g. M3253508E2B475KRTB\1
Please note all parts are terminated with a minimum 10% Pb plating
DIMENSIONS
mm (inches)
M3253502
0402
M3253503
0603
M3253504
0805
M3253505
1206
M3253506
1210
M3253507
1812
M3253508
2220
Size
Min.
0.92
Max.
1.12
Min.
1.45
Max.
1.75
Min.
1.79
Max.
2.26
Min.
3.00
Max.
3.45
Min.
2.94
Max.
3.45
Min.
4.19
Max.
4.80
Min.
5.2
Max.
6.1
(L) Length
(0.036) (0.044) (0.057) (0.069) (0.069) (0.089) (0.118) (0.136) (0.116) (0.136) (0.165) (0.190) (0.208) (0.24)
0.41
(0.016) (0.024) (0.026) (0.038) (0.040) (0.060) (0.053) (0.073) (0.088) (0.108) (0.114) (0.138) (0.181) (0.213)
0.61 (0.24) Max. 0.99 (0.039) Max. 1.52 (0.060) 1.78 (0.070) Max. 2.80 (0.110) Max. 2.80 (0.110) Max. 2.80 (0.110) Max.
0.1 0.30 0.20 0.61 0.25 0.75
0.61
0.66
0.97
1.01
1.52
1.35
1.85
2.25
2.74
2.89
3.50
4.59
5.41
(W) Width
(T) Thickness
(t) terminal
0.15
0.86
0.15
0.86
0.15
1.1
0.17
1.09
(0.004) (0.012) (0.008) (0.024) (0.010) (0.030) (0.006) (0.034) (0.006) (0.034) (0.006) (0.042) (0.007) (0.043)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
2
TDS-ESA-0001 | Rev 2
mil prf 32535, nasa, european space agency and cecc approved ceramic capacitor products
–
–