F311A226MB8
更新时间：2025-01-16 19:03:23
品牌：NICHICON
描述：Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT
概述
规格参数
数据手册F311A226MB8 概述
Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT 固定电容器
F311A226MB8 规格参数
| 是否无铅： | 不含铅 | 是否Rohs认证： | 符合 |
| 生命周期： | Obsolete | 包装说明： | , 1311 |
| Reach Compliance Code： | unknown | ECCN代码： | EAR99 |
| HTS代码： | 8532.22.00 | 风险等级： | 5.84 |
| 电容： | 22 µF | 电容器类型： | TANTALUM CAPACITOR |
| 介电材料： | TANTALUM (SOLID POLYMER) | JESD-609代码： | e3 |
| 漏电流： | 0.022 mA | 安装特点： | SURFACE MOUNT |
| 负容差： | 20% | 端子数量： | 2 |
| 最高工作温度： | 105 °C | 最低工作温度： | -55 °C |
| 封装形状： | RECTANGULAR PACKAGE | 包装方法： | TR |
| 极性： | POLARIZED | 正容差： | 20% |
| 额定（直流）电压（URdc）： | 10 V | 纹波电流： | 1035 mA |
| 尺寸代码： | 1311 | 表面贴装： | YES |
| Delta切线： | 0.08 | 端子面层： | Tin (Sn) |
| 端子形状： | WRAPAROUND | Base Number Matches： | 1 |
F311A226MB8 数据手册
通过下载F311A226MB8数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载CONDUCTIVE POLYMER TANTALUM SOLID ELECTROLYTIC CAPACITORS
Conductive Polymer Resin-molded Chip,
Compact Series
F3 1
Adapted to the RoHS directive (2002/95/EC).
Specifications
Item
Performance Characteristics
Category Temperature Range –55 to +105˚C (Rated temperature + 85˚C)
Capacitance Tolerance ±20% (120Hz)
Dissipation Factor(at 120Hz) Refer to the list below
ESR (100kHz)
Leakage Current
Ripple Current
Refer to the list below
After 5 minutes' application of rated voltage, leakage current
at 20˚C is not more than 0.1CV
Refer to the list below
At 60˚C, 90 to 95% R.H. 500hours
..
.......
.........
Damp Heat
(No voltage applied)
Capacitance Change Within –20 to +30% of initial value
Dissipation Factor
1.5 times Initial specified value or less
Initial specified value or less
Type numbering system (Example : 6.3V 47 µF)
Leakage Current
–55˚C / +105˚C 30 minutes each 5 cycle
..
1
2
3
4
5
6
7
8
9
10 11
Capacitance Change Within ±20% of initial value
Taping code
F 3 1 0 J 4 7 6 M B A
Temperature Cycles
.......
.........
Dissipation Factor
Leakage Current
Initial specified value or less
Initial specified value or less
(Refer to page 300 for details)
Tape width Reel Dia Reel Dia
(mm)
(φ180mm) (φ330mm)
Test Condition;10 second reflow at 240˚C
A
8
E
..
Resistance
to Soldering Heat
Capacitance Change Within ±20% of initial value
.......
.........
Case code
Dissipation Factor
Leakage Current
1.3 times Initial specified value or less
Initial specified value or less
Capacitance tolerance
Rated Capacitance
Rated voltage
Series
After application of surge voltage in series with a 1kΩ resistor
at the rate of 30 seconds ON, 30 seconds OFF, for 1000
successive test cycles at 85˚C, capacitors meet the
characteristics requirements listed below.
Surge
...
Capacitance Change Within ±20% of initial value
........
..........
Dissipation Factor
Leakage Current
Initial specified value or less
Initial specified value or less
Dimensions
After 1000 hours' application of rated voltage in series
L
W1
with a 3Ω resistor at 85˚C.
....
Endurance
Endurance
1
2
Capacitance Change Within ±20% of initial value
H
...
Dissipation Factor 1.5 times Initial specified value or less
...
Leakage Current Initial specified value or less
After 1000 hours' application of rated voltage in series
with a 3Ω resistor at 105˚C,capacitors meet the characteristic
requirements listed below
W2
S
S
....
Capacitance Change Within ±20% of initial value
(mm)
...
Dissipation Factor 3 times Initial specified value or less
Case code
W2
H
W1
S
L
...
Leakage Current Initial specified value or less
2.0±0.2
1.1±0.1
1.1±0.1
1.1±0.1
0.5±0.2
0.8±0.2
0.8±0.2
P
A
B
1.25±0.1
1.6±0.2
2.8±0.2
0.9±0.1
1.2±0.1
2.3±0.1
After applying the pressure load of 5N for 10±1 seconds
horizontally to the center of capacitor side body which has
no electrode and has been soldered beforehand on an
aluminum substrate, neither exfoliation
3.2±0.2
3.4±0.2
Shear Test
not its sign shall be found at the terminal
electrode.
•
5N (0.51kg f)
For 10±1seconds
Keeping a capacitor surface-mounted on a substrate upside
down and supporting the substrate at both of the opposite
bottom points 45mm apart from the center of the capacitor,
the pressure load is applied with a specified jig at the center
of the substrate so that the substrate may bend by 1mm as
Marking
P Case
A Case
B Case
Conductive
Polymer
Rated Capacitance (µF)
Capacitance
Terminal Strength
code
illustrated.
20
33
P6v
Ja
Jar
Rated
Voltage
code
R230
Then, there shall be found no
remarkable abnormality on the
capacitor terminals.
Capacitance
code
Month code
Month
code
Rated
Conductive Polymer
Voltage
code
45
45
"
"
)
Rated Voltage (6.3V is marked as 6V
As for the surge voltage refer to page 299 for details.
CAT.8100W-2
CONDUCTIVE POLYMER TANTALUM SOLID ELECTROLYTIC CAPACITORS
F3 1
Standard ratings
V
2.5
0E
4
0G
P
6.3
0J
10
1A
Capacitance
code
Cap
(µF)
Code
10
106
226
336
476
686
107
P
A
a
j
22
33
P
A
A
P
(P) • A
(A) • B
B
(A) • B
B
A
n
s
47
(A) • B
B
68
B
100
B
B
(B)
(
)
The series in parentheses are being developed.
Please contact to your local Nichicon sales office when
these series are being designed in your application.
Standard ratings
Rated Volt
( )
V
Rated Capacitance
Leakage Current Disspation Factor
ESR
Rated Ripple
Case code
Part Number
(µF)
(µA)
(%@120Hz)
(mΩ@100kHz) (mArms@100kHz)
22
33
47
P
A
A
B
P
P
A
B
B
P
A
B
B
B
A
B
B
B
F310E226MPA
F310E336MAA
F310E476MAA
F310E107MBA
F310G106MPA
F310G226MPA
F310G336MAA
F310G476MBA
F310G107MBA
F310J106MPA
F310J226MAA
F310J336MBA
F310J476MBA
F310J686MBA
F311A106MAA
F311A226MBA
F311A336MBA
F311A476MBA
5.5
8.3
6
6
6
8
6
6
6
8
8
6
6
8
8
8
6
8
8
8
200
150
150
70
354
632
2.5
11.8
25.0
4.0
632
100
10
22
33
47
100
10
22
33
47
68
10
22
33
47
1035
354
200
200
150
70
8.8
354
4
13.2
18.8
40.0
6.3
632
1035
1035
354
70
200
200
70
13.9
20.8
29.6
42.8
10.0
22.0
33.0
47.0
548
6.3
10
1035
1035
1035
548
70 (55)
70
200
70
1035
1035
1035
70
70
(
) ESR specification types are also available upon request.
Please contact to your local Nichicon sales office when
these series are being designed in your application.
CAT.8100W-2
F311A226MB8 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| F311A226MBA | NICHICON | Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT | 获取价格 |
|
| F311A226MBE | NICHICON | Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT | 获取价格 |
|
| F311A336MB8 | NICHICON | Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT | 获取价格 |
|
| F311A336MBE | NICHICON | Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT | 获取价格 |
|
| F311A476MBA | NICHICON | Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT | 获取价格 |
|
| F311A476MBE | NICHICON | Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 1311, CHIP, ROHS COMPLIANT | 获取价格 |
|
| F3120 | ETC | Peripheral IC | 获取价格 |
|
| F3131 | ETC | A Major Advance in RTD Technology | 获取价格 |
|
| F313100 | AMPHENOL | Connector Accessory | 获取价格 |
|
| F3132 | ETC | A Major Advance in RTD Technology | 获取价格 |
|
F311A226MB8 相关文章
LG电子大幅缩减储能业务，解散产品开发团队
- 2025-01-17
- 11
SK 海力士有望2月启动业界最先进1c nm制程DRAM量产
- 2025-01-17
- 11
英飞凌泰国北榄府半导体后端生产基地正式动工
- 2025-01-17
- 10
台积电回应CoWoS砍单传闻：纯属谣言，公司持续扩产以满足客户需求
- 2025-01-17
- 11
