首页 > MMT-117-01-SM-SH-LC-006-P-TR

MMT-117-01-SM-SH-LC-006-P-TR

更新时间：2025-07-09 03:58:26

品牌：SAMTEC

描述：Board Connector, 16 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal,

PDF下载

中文翻译

免费 PCB/SMT

概述
数据手册

如果您发现信息不准确，欢迎纠错

MMT-117-01-SM-SH-LC-006-P-TR 概述

Board Connector, 16 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal,

MMT-117-01-SM-SH-LC-006-P-TR 数据手册

通过下载MMT-117-01-SM-SH-LC-006-P-TR数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

NOTES:

REVISION DH

MMT-1XX-XX-XX-XX-XX-XXX-X-XX

REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM PUSHOUT FORCE: 2 LB.

OPTION

3. FOR NON -LC & -A, USE 2TS-XX-D.

-TR: TAPE AND REEL

(37 POSTION MAX)

(SEE SHT 5)

No OF POSITIONS

-02 THRU -50 (PER ROW)

4. COPLANARITY TO INCLUDE INSULATOR.

5. MAX BURR ALLOWANCE: .002[0.05].

6. MAXIMUM CUT FLASH: .015[0.38]. (NO FLASH TO BE ON BOTTOM OF BODY).

7. -MT OPTION: PIN B TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY

-DH OPTION: PIN A TO BE FLUSH TO .003" ABOVE A LINE MADE BY THE BODY

PIN B TO BE FLUSH TO .001" BELOW/.003" ABOVE A LINE MADE BY THE BODY

-SH OPTION: PIN A TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY.

8. ORIENTATE PINS TO REDUCE THE NUMBER OF BANDOLIER MARKS IN THE

POST AREA. (SEE TABLE 4)

OPTION

-P: PICK & PLACE PAD

(USE PPP-13)

LEAD STYLE

-01: .126 [3.20] POST

-02: .175 [4.45] POST

(SEE TABLE 2)

(2 POSITION MINIMUM)

OPTION

9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED. THE -LC

OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC

PLATING SPECIFICATION

-XXX: POLARIZED POSITION

-XXX SPECIFIES POSITION OMITTED

(SEE POLARIZATION VIEW)

-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" ON TAIL

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE IN ON TAIL

RECOMMENDS MANUAL PLACEMENTFOR ALL ASSEMBLIES WITH

THE -LC OPTION.

10. NOTE DELETED.

OPTION (SEE NOTE 3)

-LC: LOCKING CLIP (SEE NOTE 9)

(FOR -DH USE 2TS-XX-DH-LC-XX)

(FOR -SH USE 2TS-XX-SH)

(NOT AVAILABLE WITH -A)

-A: ALIGNMENT PIN

-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-T: MATTE TIN CONTACT AND TAIL

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(FOR -DH USE 2TS-XX-DH-A-XX)

(FOR -SH USE 2TS-XX-SH-A-XX)

(NOT AVAILABLE WITH -LC)

-K: POLYIMIDE FILM PAD (SEE FIG 14, SHT 6)

(3 POS. MIN)

-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL.

(USE K-DOT-.177-.281-.005)

-TM: MATTE TIN CONTACT AND TAIL

ROW OPTION

-SH: SINGLE (2TS-XX-SH-X-XX)

+.005 [0.13]

(NO. OF POS x .07874[2.0000])

- .010 [0.25]

-DH: DOUBLE (2TS-XX-DH-XX-XX)

-MT: MIXED TECHNOLOGY (2TS-XX-DH-XX-XX)

(NOT AVAILABLE WITH -LC, OR -A OPTIONS)

(NO OF POS - 1) x .07874[2.0000])

.003[0.08]

MAX SWAY

(EITHER DIRECTION)

.0787 2.000

.15748 4.0000

REF

.055 1.40

2TS-XX-DH-XX-XX

SEE NOTE 6

LC-06-TM

.0197 0.500 SQ

(TYP) REF

.11 2.8

"C"

(SEE TABLE 2)

.245±.010 6.22±0.254

SEE NOTE 5

3°

.003 0.08 MAX

(SEE NOTE 7)

SEE TABLE 5

(SEE NOTE 4)

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

TOLERANCES ARE:

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SMATEC.com code 55322

SEE NOTE 5

.XXX: .005 [.13]

(NO. OF POS x .07874[2.0000]

- .15748[4.0000]) .003[0.08]

.XXXX: .0020 [.051]

SHEET SCALE: 4:1

MATERIAL:

DO NOT SCALE DRAWING

DESCRIPTION:

INSULATOR: LCP VECTRA;

UL 94 V0;

2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM

DWG. NO.

COLOR: BLACK

TERMINAL: PHOS BRONZE

FIG 1

MMT-1XX-XX-XX-XX-XX-XXX-X-XX

MMT-108-01-X-DH-LC SHOWN

BY:

DEAN P

12/12/2000 SHEET 1 OF 6

F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW

REVISION DH

.07874 2.0000 REF

SEE NOTE 6

2TS-XX-SH-X

.043 1.09

REF

MAX SWAY

(EITHER DIRECTION)

"C"

.060 1.52 REF

(SEE TABLE 2, SHT 1)

.07874 2.000 REF

.11 2.8

.050 1.27 REF

(NO. OF POS x .07874[2.0000]

- .15748[4.0000]) .003[0.08]

5°

.006[0.15]

(SEE NOTE 4)

F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail: info@SAMTEC.com code: 55322

DESCRIPTION:

FIG 2

DO NOT SCALE DRAWING

SHEET SCALE: 4:1

MMT-108-01-X-SH-A SHOWN

2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM

DWG. NO.

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

MMT-1XX-XX-XX-XX-XX-XXX-X-XX

BY:

DEAN P

12/12/2000 SHEET 2 OF 6

REVISION DH

90°

.050 1.27

36/100

35/99

.100±.010 2.53±0.25

FIG 3

FIG 4

-MT: MIXED TECHNOLOGY

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

POLARIZATION VIEW

((NO. OF POS. X .07874 [2.000])/2 - "E") .010[0.25]

PIN A (-DH)

.300 7.62 REF

"E"

.157 4.00

PPP-13

.250 6.35

REF

PIN A (-SH)

PPP-13

-SH

-DH

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

FIG 5

-P: PICK & PLACE PAD OPTION

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

e-Mail info@SMATEC.com

DESCRIPTION:

FAX: 812-948-5047

code 55322

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM

DWG. NO.

MMT-1XX-XX-XX-XX-XX-XXX-X-XX

F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW

BY:

DEAN P

12/12/2000 SHEET 3 OF 6

REVISION DH

90°

"C"

(SEE TABLE 2, SHT 1)

"C"

(SEE TABLE 2, SHT 1)

.11 2.8

.050 1.27

.100 2.53

"D"

.113 2.87

(SEE TABLE 2, SHT 1)

-MT

-SH

-DH

-DH & MT

FIG 7

FIG 6

IN-PROCESS 2

IN-PROCESS 1

-DH

FIG 8

IN-PROCESS 3

.295 7.49

"D"

(SEE TABLE 2, SHT 1)

"D"

(SEE TABLE 2, SHT 1)

-DH

-MT

-DH

-MT

FIG 10

FIG 9

IN-PROCESS 5

IN-PROCESS 4

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SMATEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM

DWG. NO.

MMT-1XX-XX-XX-XX-XX-XXX-X-XX

F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW

BY:

DEAN P

12/12/2000 SHEET 4 OF 6

POST TO RIGHT

ROUND HOLES

REVISION DH

FIG 12

-TR TAPE AND REEL VIEW

(DRAWING NOT DETAILED)

.245 6.22

OBLONG HOLES

USER DIRECTION OF UN-REELING

POCKET NOT DETAILED

NOTE: PARTS MUST BE ORIENTED PER THE DESIGN OF THE POCKET TOOL.

POCKETS DESIGNED AFTER REVISION BW MUST ORIENT PARTS PER THIS VIEW.

-DH

-MT

FIG 11

IN-PROCESS 6

F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SMATEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM

DWG. NO.

MMT-1XX-XX-XX-XX-XX-XXX-X-XX

BY:

DEAN P

12/12/2000 SHEET 5 OF 6

REVISION DH

FIG 13

-T PLATING ONLY

POST AREA

(SEE NOTE 8)

(SEE TABLE 4)

"C" REF

(SEE TABLE 2, SHT 1)

.075 1.905 REF

NOTES:

BANDOLIER

REF

LOAD ALL PARTS (EXCEPT THOSE WITH -SH OPTION) POS 1 FIRST IN

SAME DIRECTION AS ARROW.

FOR 2 & 3 POSITIONS, TUBE PACKAGING ONLY AVAILABLE WITH

-P OPTION. 2 & 3 POSITIONS WITHOUT -P OPTIONS MUST BE LAYER

PACKAGED. ALL OTHERS, TUBE AS SHOWN.

TAIL AREA

PACKAGE PARTS AS SHOWN

FIG 14

-K: POLYIMIDE FILM PAD

"R"

(SEE NOTE )

.049±.020 1.25±0.51

.162 4.13

"S"

(SEE NOTE )

.084 2.13

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

.177 4.50 REF

-SH

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

-DH

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SMATEC.com code 55322

DESCRIPTION:

NOTE: "R" = USED MEASURED DIMENSION (REF)

"S" = {("R" - .177 [4.50]) / 2} ±.020 [0.51]

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM

DWG. NO.

MMT-1XX-XX-XX-XX-XX-XXX-X-XX

F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW

BY:

DEAN P

12/12/2000 SHEET 6 OF 6

MMT-117-01-SM-SH-LC-006-P-TR 相关器件

型号	制造商	描述	价格	文档
MMT-117-01-T-DH-001	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-005-K	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-005-K-TR	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-A-002-P-TR	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-A-003-P	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-A-004	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-A-005-P	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-A-005-TR	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-A-006	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格
MMT-117-01-T-DH-A-006-P	SAMTEC	Board Connector, 33 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,	获取价格