首页 > LALAL02TB1R2K

LALAL02TB1R2K

更新时间：2025-06-18 01:25:38
品牌：TAIYO YUDEN
描述：General Purpose Inductor, 1.2uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT

PDF下载

中文翻译

免费 PCB/SMT

LALAL02TB1R2K 概述

General Purpose Inductor, 1.2uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 固定电感器

LALAL02TB1R2K 规格参数

生命周期：ObsoleteReach Compliance Code：unknown
ECCN代码：EAR99HTS代码：8504.50.80.00
风险等级：5.02型芯材料：FERRITE
直流电阻：0.9 Ω标称电感 (L)：1.2 µH
电感器应用：RF INDUCTOR电感器类型：GENERAL PURPOSE INDUCTOR
功能数量：1端子数量：2
最高工作温度：105 °C最低工作温度：-25 °C
最小质量因数（标称电感时）：40最大额定电流：0.26 A
自谐振频率：110 MHz形状/尺寸说明：TUBULAR PACKAGE
屏蔽：NO表面贴装：NO
端子位置：AXIAL端子形状：WIRE
测试频率：7.96 MHz容差：10%
Base Number Matches：1

LALAL02TB1R2K 数据手册

通过下载LALAL02TB1R2K数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Notice for TAIYO YUDEN productsꢀ  
Please read this notice before using the TAIYO YUDEN products.  
REMINDERS  
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change  
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-  
fore practical application or usage of the Products.  
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-  
rating such products, which are caused under the conditions other than those specified in this catalog or individual  
specification.  
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is  
available.  
■ Please conduct validation and verification of products in actual condition of mounting and operating environment  
before commercial shipment of the equipment.  
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for  
use in general electronics equipment.(for AV, office automation, household, office supply, information service,  
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any  
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,  
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have  
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.  
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-  
rine system, military, etc. where higher safety and reliability are especially required.  
In addition, even electronic components or functional modules that are used for the general electronic equipment,  
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-  
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to  
install a protective circuit is strongly recommended at customer's design stage.  
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-  
tors (so called“TAIYO YUDEN’s official sales channel”).  
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.  
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-  
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of  
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.  
■ Caution for export  
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-  
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.  
Should you have any question or inquiry on this matter, please contact our sales staff.  
notice_e-01  
AXIAL LEADED INDUCTORS  
WAVE  
■ FEATURES  
■ APPLICATIONS  
◦Extremely reliable inductors that are ideal for automatic insertion.  
◦Use for TVs, DVD, audio equipment, communication instrument,  
tuner, and general electrical instrument.  
◦Highly efficient automated production processes can provide high  
quality inductors in large volumes.  
◦For DC/DC converter (LCD TV, PDP TV, CTV, DVD etc（.) CAL45 Series）  
◦Wide selection of configurations including axial leaded, formed radial leads  
and bulk products to meet most manufacturing needs.  
■ OPERATING TEMP.  
◦CAL45 is high current type, and has superior DC bias characteristics.  
■ ORDERING CODE  
◦ー25℃～105℃（Including self-generated heat）  
L A L △ 0 2 T B R 2 2 K ○ ○ ○ ○ ○  
❶
❷
❸
❹
❺
❻
❼
❶Type  
Axial leaded  
inductor  
❸Dimensions  
❹Lead configurations  
KR Formed lead/bulk  
❺Nominal inductance  
〔μH〕  
example  
❻Inductance tolerance  
（L×D）〔mm〕max  
02 3.4×2.3（LAL/LAP）  
3.6×2.4（LAN）  
〔％〕  
LA  
J
±5  
NA Axial lead/bulk  
1R5  
120  
1.5  
12  
High current  
CA axial leaded  
inductor  
K
±10  
Axial lead (26mm lead space)  
/ammo pack  
TA  
TB  
45  
8.0×4.4（CA）  
❼Internal code  
△△△△△ Standard product  
△＝Blank space  
※R=decimal point  
Axial lead (52mm lead space)  
/ammo pack  
❷Product Specification  
L△  
N△  
Standard type  
High current type  
Standard type  
VD Formed lead/ammo pack  
VB Formed lead/ammo pac（k CAL45）  
P△  
（Lead diameter：0.45φmm）  
△＝Blank space  
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY  
Dimensions［mm（］inch）  
Taped  
Bulk  
Standard Quantity (pcs)  
Lead Configuration Code  
Type  
L
φD  
φd  
Straight  
Formed  
VD  
Straight  
Formed  
TA  
TB  
VD  
NA  
KR  
TB  
NA  
3.4max.  
2.3max.  
0.5±0.05  
LAL02  
———  
2,000  
500  
ー
（0.134max.） （0.091max.） （0.018±0.002）  
Pitch：5mm（0.197）  
KR  
TA  
3.4max.  
（0.134max.） （0.091max.）  
2.3max.  
LAP02  
LAN02  
0.45±0.05  
（0.018±0.002）  
———  
———  
2,000  
ー
2,000  
3.6max.  
（0.142max.） （0.094max.）  
2.4max.  
Pitch：5mm（0.197）  
Unit：mm（inch）  
Standard Quantity (pcs)  
【CA type】  
Dimensions［mm（］inch）  
φD  
Taped  
Type  
Fig.  
L
φd  
Straight  
Formed  
Bulk  
Taped  
Axial lead  
2000  
1500  
VB  
TB  
8.0max  
（0.315max）  
4.4max  
0.65±0.05  
CAL45  
—
（0.173max） （0.026±0.002）  
Formed lead  
5.0mm（0.197）  
Unit：mm（inch）  
■ AVAILABLE INDUCTANCE RANGE  
Type  
LAL/LAP02  
Range  
Type  
LAN02  
Range  
CAL45  
0.1μ  
Rdc  
max[Ω]  
Imax[A]  
Imax[A]  
Rdc max[Ω] Imax[A]  
Rdc max[Ω]  
0.1  
1
0.12  
0.22  
0.036 1.0μ  
3.3  
1.0μ  
10μ  
270  
0.8  
2.5  
12  
500  
280  
120  
0.32  
1.0  
0.14  
1.2  
1.7  
0.59  
0.17  
160  
44  
100μ  
1.0m  
10m  
10  
13.2  
5.6  
100  
1000  
10m  
220  
470  
100m  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_e-01  
106  
■ PART NUMBERS  
●LAL/LAP02  
EHS (Environmental  
Measuring  
frequency  
[MHz]  
Selfーresonant  
frequency  
[MHz] (min.)  
Inductance  
[μH]  
Inductance  
Tolerance  
Q
(min.)  
DC Resistance  
[Ω] (max.)  
Rated current  
[mA] (max.)  
Ordering code  
Hazardous  
Substances  
)
LA□ 02 ○ R22K  
LA□ 02 ○ R27K  
LA□ 02 ○ R33K  
LA□ 02 ○ R39K  
LA□ 02 ○ R47K  
LA□ 02 ○ R56K  
LA□ 02 ○ R68K  
LA□ 02 ○ R82K  
LA□ 02 ○ 1R0K  
LA□ 02 ○ 1R2K  
LA□ 02 ○ 1R5K  
LA□ 02 ○ 1R8K  
LA□ 02 ○ 2R2K  
LA□ 02 ○ 2R7K  
LA□ 02 ○ 3R3K  
LA□ 02 ○ 3R9K  
LA□ 02 ○ 4R7K  
LA□ 02 ○ 5R6K  
LA□ 02 ○ 6R8K  
LA□ 02 ○ 8R2K  
LA□ 02 ○ 100K  
LA□ 02 ○ 120K  
LA□ 02 ○ 150K  
LA□ 02 ○ 180K  
LA□ 02 ○ 220K  
LA□ 02 ○ 270K  
LA□ 02 ○ 330K  
LA□ 02 ○ 390K  
LA□ 02 ○ 470K  
LA□ 02 ○ 560K  
LA□ 02 ○ 680K  
LA□ 02 ○ 820K  
LA□ 02 ○ 101K  
LA□ 02 ○ 121K  
LA□ 02 ○ 151K  
LA□ 02 ○ 181K  
LA□ 02 ○ 221K  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
450  
410  
360  
300  
230  
210  
190  
170  
150  
110  
80  
0.40  
0.43  
0.48  
0.51  
0.56  
0.61  
0.67  
0.74  
0.80  
0.9  
1.0  
1.1  
400  
380  
370  
350  
330  
320  
310  
290  
270  
260  
250  
240  
230  
220  
210  
200  
190  
180  
175  
165  
160  
150  
145  
140  
130  
80  
35  
25.2  
60  
45  
1.2  
1.3  
1.4  
1.6  
1.7  
40  
38  
7.96  
35  
32  
30  
1.9  
2.0  
2.2  
2.5  
2.5  
2.8  
3.1  
±10％  
28  
26  
／
24  
40  
12  
22  
15  
20  
18  
18  
22  
17  
3.4  
4.3  
4.7  
5.2  
5.8  
6.4  
7.2  
27  
16  
33  
14  
76  
2.52  
39  
13  
74  
47  
12  
70  
56  
11  
68  
68  
10  
64  
82  
9.5  
9.0  
8.0  
6.0  
5.5  
5.0  
11  
46  
100  
120  
150  
180  
220  
12  
44  
13  
42  
16  
39  
40  
0.796  
18  
37  
20  
35  
□ Please specify the Product Specification（Lead）code（. L:standard 0.5mm or P:0.45mm）  
○ Please specify the Lead configuration code.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_e-01  
107  
■ PART NUMBERS  
●LAN02  
EHS (Environmental  
Measuring  
frequency  
[MHz]  
Selfーresonant  
frequency  
[MHz] (min.)  
Inductance  
[μH]  
Inductance  
Tolerance  
Q
(min.)  
DC Resistance  
[Ω] (max.)  
Rated current  
[mA] (max.)  
Ordering code  
Hazardous  
Substances  
)
LAN02 ○ R12K  
LAN02 ○ R15K  
LAN02 ○ R18K  
LAN02 ○ R22K  
LAN02 ○ R27K  
LAN02 ○ R33K  
LAN02 ○ R39K  
LAN02 ○ R47K  
LAN02 ○ R56K  
LAN02 ○ R68K  
LAN02 ○ R82K  
LAN02 ○ 1R0J  
LAN02 ○ 1R2J  
LAN02 ○ 1R5J  
LAN02 ○ 1R8J  
LAN02 ○ 2R2J  
LAN02 ○ 2R7J  
LAN02 ○ 3R3J  
LAN02 ○ 3R9J  
LAN02 ○ 4R7J  
LAN02 ○ 5R6J  
LAN02 ○ 6R8J  
LAN02 ○ 8R2J  
LAN02 ○ 100J  
LAN02 ○ 120J  
LAN02 ○ 150J  
LAN02 ○ 180J  
LAN02 ○ 220J  
LAN02 ○ 270J  
LAN02 ○ 330J  
LAN02 ○ 390J  
LAN02 ○ 470J  
LAN02 ○ 560J  
LAN02 ○ 680J  
LAN02 ○ 820J  
LAN02 ○ 101J  
LAN02 ○ 121J  
LAN02 ○ 151J  
LAN02 ○ 181J  
LAN02 ○ 221J  
LAN02 ○ 271J  
LAN02 ○ 331J  
LAN02 ○ 391J  
LAN02 ○ 471J  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
500  
500  
500  
500  
500  
480  
430  
380  
350  
310  
270  
240  
210  
190  
140  
90  
0.12  
0.14  
0.15  
0.16  
0.18  
0.19  
0.21  
0.23  
0.25  
0.27  
0.29  
0.32  
0.35  
0.38  
0.42  
0.47  
0.52  
0.57  
0.63  
0.69  
0.75  
0.84  
0.92  
1.0  
850  
800  
760  
730  
690  
660  
640  
610  
580  
550  
520  
500  
480  
450  
430  
410  
390  
370  
360  
340  
320  
310  
290  
280  
280  
265  
250  
235  
220  
180  
170  
160  
140  
130  
125  
120  
90  
±10％  
25.2  
50  
1.2  
1.5  
1.8  
2.2  
2.7  
70  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
50  
7.96  
35  
32  
30  
28  
26  
40  
24  
12  
22  
1.0  
15  
20  
1.2  
18  
18  
1.3  
22  
±5％  
17  
1.5  
27  
15  
1.7  
33  
14  
2.2  
2.52  
39  
13  
2.4  
47  
12  
2.8  
56  
10  
4.1  
68  
9.2  
8.8  
8.0  
6.6  
5.8  
5.4  
4.8  
3.6  
3.4  
3.2  
3.0  
4.5  
82  
5.0  
100  
120  
150  
180  
220  
270  
330  
390  
470  
5.6  
50  
9.2  
10.5  
11.5  
13  
85  
80  
75  
0.796  
16  
70  
18  
66  
20  
63  
22  
60  
○ Please specify the Lead configuration code.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_e-01  
108  
■ PART NUMBERS  
●CAL45  
Rated current ※）  
Self-resonant  
frequency  
[MHz]  
EHS (Environmental  
Measuring  
frequency  
[MHz]  
DC Resistance  
[Ω]  
(max.)  
[mA] (max.)  
Inductance  
[μH]  
Inductance  
Tolerance  
Q
Ordering code  
Hazardous  
Substances  
(refarence)  
Saturation current  
Temperature rise current  
Idc2  
)
(refarence)  
Idc1  
5600  
5000  
4400  
4100  
3900  
3500  
3100  
3000  
2800  
2500  
2200  
2000  
1700  
1600  
1400  
1250  
1200  
1100  
1000  
920  
890  
790  
700  
620  
590  
550  
490  
420  
370  
CAL 45 ○ 1R0K  
CAL 45 ○ 1R2K  
CAL 45 ○ 1R5K  
CAL 45 ○ 1R8K  
CAL 45 ○ 2R2K  
CAL 45 ○ 2R7K  
CAL 45 ○ 3R3K  
CAL 45 ○ 3R9K  
CAL 45 ○ 4R7K  
CAL 45 ○ 5R6K  
CAL 45 ○ 6R8K  
CAL 45 ○ 8R2K  
CAL 45 ○ 100K  
CAL 45 ○ 120K  
CAL 45 ○ 150K  
CAL 45 ○ 180K  
CAL 45 ○ 220K  
CAL 45 ○ 270K  
CAL 45 ○ 330K  
CAL 45 ○ 390K  
CAL 45 ○ 470K  
CAL 45 ○ 560K  
CAL 45 ○ 680K  
CAL 45 ○ 820K  
CAL 45 ○ 101K  
CAL 45 ○ 121K  
CAL 45 ○ 151K  
CAL 45 ○ 181K  
CAL 45 ○ 221K  
CAL 45 ○ 271K  
CAL 45 ○ 331K  
CAL 45 ○ 391K  
CAL 45 ○ 471K  
CAL 45 ○ 561K  
CAL 45 ○ 681K  
CAL 45 ○ 821K  
CAL 45 ○ 102K  
CAL 45 ○ 122K  
CAL 45 ○ 152K  
CAL 45 ○ 182K  
CAL 45 ○ 222K  
CAL 45 ○ 272K  
CAL 45 ○ 332K  
CAL 45 ○ 392K  
CAL 45 ○ 472K  
CAL 45 ○ 562K  
CAL 45 ○ 682K  
CAL 45 ○ 822K  
CAL 45 ○ 103K  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
RoHS  
1.0  
1.2  
350  
300  
300  
200  
200  
70  
70  
40  
40  
35  
35  
30  
25  
25  
25  
20  
20  
17  
15  
13  
13  
11  
10  
9
0.036  
0.039  
0.041  
0.048  
0.054  
0.058  
0.066  
0.072  
0.079  
0.089  
0.097  
0.110  
0.14  
0.17  
0.19  
0.24  
0.28  
0.33  
0.37  
0.47  
0.52  
0.75  
0.78  
0.92  
1.2  
3300  
3200  
3000  
2800  
2700  
2500  
2400  
2300  
2200  
2100  
2000  
1900  
1800  
1450  
1430  
1300  
1220  
1130  
1080  
900  
870  
710  
1.5  
1.8  
2.2  
2.7  
30  
7.96  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
12  
15  
40  
30  
18  
22  
27  
2.52  
33  
／
39  
47  
56  
68  
700  
640  
630  
490  
470  
82  
100  
120  
150  
180  
220  
270  
330  
390  
470  
560  
680  
820  
1000  
1200  
1500  
1800  
2200  
2700  
3300  
3900  
4700  
5600  
6800  
8200  
10000  
±10%  
40  
50  
9
7
1.6  
7
1.8  
60  
80  
5
2.3  
450  
425  
355  
330  
280  
240  
240  
220  
210  
5
2.9  
5
3.4  
350  
320  
290  
270  
0.796  
70  
80  
4.5  
4
3.6  
4.9  
4
6.3  
3
7.0  
250  
240  
3
7.8  
2.5  
2.5  
2
11.0  
13.2  
17  
220  
190  
170  
170  
150  
140  
2
22  
150  
1.5  
1.5  
1.2  
1.2  
1
27  
140  
120  
36  
130  
110  
45  
110  
90  
0.252  
65  
100  
95  
75  
69  
70  
70  
30  
1
80  
90  
65  
1
90  
90  
60  
1
100  
125  
155  
80  
60  
0.7  
0.6  
75  
50  
0.0796  
65  
45  
○ Please specify the Lead configuration code.  
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 10%. (at 20℃)  
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)  
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_e-01  
109  
■ ELECTRICAL CHARACTERISTICS  
DC Bias characteristics  
■
（Measured by HP4285A）  
CAL45  
LAL/LAP02  
100000  
10000  
1000  
CAL45TB103K  
CAL45TB102K  
100  
10  
CAL45TB101K  
CAL45TB100K  
1
CAL45TB1R0K  
0.1  
0.01  
0.1  
1
10  
Temperature characteristics  
■
（Measured by HP4285A）  
LAL/LAP02  
LAN02  
LAN02TA100J  
LAN02TA101J  
Q-Characteristics  
■
（Measured by HP4285A+HP42851A）  
LAL/LAP02  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_e-01  
110  
／
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_e-01  
111  
■ PACKAGING  
①Minimum Quantity  
◦Taping for Straight Leads  
◦TB（a：52mm lead space）  
（2.05 inches）  
Type  
Lead Configuration code  
Standard quantity (pcs.)  
LAL02  
LAP02  
LAN02  
CAL45  
TB  
TA  
TA  
TB  
2,000  
2,000  
2,000  
2,000  
◦Taping for Formed Leads  
Type  
Lead Configuration code  
Standard quantity (pcs.)  
LAL02  
CAL45  
VD  
VB  
2,000  
1,500  
◦Bulk  
L
1
Type  
Lead Configuration code  
Standard quantity (pcs.)  
LAL02  
LAP02  
LAN02  
NA  
KR  
KR  
500  
Dimensions  
Minimum  
insertion  
pitch  
2,000  
2,000  
Type  
φD  
L
a
b
|L1-L2|  
φd  
＋2  
－1  
52  
2.3max  
（0.091max）（0.134max）  
3.4max  
1.2max  
1.0max  
0.5±0.05  
5.0  
②Dimension  
◦NA  
LAL02  
＋0.079  
（0.047max）（0.039max）（0.020±0.002）（0.197）  
（2.05－0.039  
）
Unit：mm（inch）  
◦VD  
Dimensions  
Minimum  
insertion pitch  
Type  
φD  
2.3max  
L
φd  
ℓ
3.4max  
0.50±0.05  
24±2.0  
5.0  
LAL02  
（0.091max）（0.134max）（0.020±0.002）（0.945±0.079） （0.197）  
Unit：mm（inch）  
◦KR  
1
Type  
Symbol  
A
Dimensions  
Symbol  
W
Dimensions  
Dimensions  
Lead configuration  
code  
＋1.0  
18.0  
Type  
3.9max  
（0.154max）  
－0.5  
φD  
F1  
φd  
b
＋0.039  
（0.709  
）
－0.020  
2.3max  
5.0±0.5  
0.45±0.05  
7.0±1.0  
LAP02  
KR  
KR  
2.3max  
（0.091max）  
12.5 min.  
（0.492 min.）  
（0.091max）（0.197±0.020）（0.018±0.002）（0.276±0.039）  
φD  
H
W0  
W1  
W2  
ℓ
2.4max  
5.0±0.5  
0.45±0.05  
7.0±1.0  
＋0.75  
LAN02  
9.0  
19.5±0.5  
（0.768±0.020）  
－0.5  
（0.094max）（0.197±0.020）（0.018±0.002）（0.276±0.039）  
＋0.030  
（0.354  
）
－0.020  
Unit：mm（inch）  
12.7±1.0  
（0.500±0.039）  
3.0 max.  
（0.118 max.）  
P
◦TA（a：26mm lead space）  
（1.02 inch）  
12.7±0.3  
（0.500±0.012）  
2.0 max.  
（0.079 max.）  
P0  
P1  
P2  
F
LAL02  
3.85±0.7  
（0.152±0.028）  
4.0±0.3  
（0.157±0.012）  
φD0  
6.35±0.5  
（0.250±0.020）  
5.08±0.5  
（0.200±0.020）  
0.50±0.05  
（0.020±0.002）  
φd  
0±1.0  
（0±0.039）  
11.0 max.  
（0.433 max.）  
△h  
ー
L
t
0.5±0.2  
（0.020±0.008）  
ー
L
1
Unit：mm（inch）  
Dimensions  
Minimum  
insertion  
pitch  
Type  
φD  
L
a
b
|L1-L2|  
φd  
＋0.5  
－0  
26  
2.3max  
（0.091max）（0.134max）  
3.4max  
0.8max  
0.5max 0.45±0.05  
5.0  
LAP02  
LAN02  
＋0.020  
（0.031max）（0.020max）（0.018±0.002）（0.197）  
（1.02－0  
）
＋0.5  
26  
2.4max  
（0.094max）（0.142max）  
3.6max  
0.8max 0.5max 0.45±0.05  
（0.031max）（0.020max）（0.018±0.002）（0.197）  
）
5.0  
－0  
＋0.020  
（1.02－0  
Unit：mm（inch）  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_pack_e-01  
leaded_i01_pack-P1  
■ PACKAGING  
◦CAL 45 TB（a：52mm lead space）  
（2.05 inches）  
Dimensions  
Minimum  
insertion  
pitch  
Type  
φD  
L
a
b
|L1-L2|  
φd  
＋2  
52  
4.4max 8.0max  
1.2max 1.0max  
） （0.047max） （0.039max） （0.026±0.002）  
0.65±0.05  
10.0  
（0.394）  
ー1  
CAL45  
＋0.079  
ー0.039  
（0.173max） （0.315max） （2.05  
Unit：mm（inch）  
◦CAL 45VB  
F
Type  
Symbol  
D
Dimensions  
Symbol  
W
Dimensions  
＋1.0  
18.0  
ー0.5  
φ4.4max  
＋0.039  
（
）
0.709ー0.020  
14.0max  
（0.551max）  
12.5min  
H2  
H0  
P
W0  
W1  
W2  
ℓ
D0  
φd  
L
（0.492min）  
＋0.75  
9.0  
16.0±1.0  
（0.630±0.039）  
ー0.5  
＋0.030  
（
）
0.354ー0.020  
※2  
12.7±1.0  
（0.500±0.039）  
3.0max  
（0.118max）  
※1  
2.0max  
（0.079max）  
12.7±0.3  
CAL 45  
P0  
P1  
P2  
F
（0.500±0.012）  
3.85±0.7  
（0.152±0.028）  
φ4.0±0.2  
（φ0.157±0.008）  
6.35±1.3  
（0.250±0.051）  
φ0.65±0.05  
（φ0.026±0.002）  
5.0±1.0  
（0.197±0.039）  
11.0max  
（0.433max）  
0.0±2.0  
（0.0±0.079）  
0.9max  
（0.035max）  
t
△h  
Unit：mm（inch）  
※1 Accumulated error for 20 pitches is ± 1mm.  
※2 Bonding tape must not protrude from the base tape.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
leaded_i01_pack_e-01  
leaded_i01_pack-P2  
■ RELIABILITY DATA  
1. Operating temperature Range  
LA Type  
CAL45 Type  
ー25～＋105℃  
LHL□□□  
FBA/FBR  
ー25～＋85℃  
ー25～＋105℃  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA・CA・FL : Including self-generated heat  
LHL□□□ : Including self-generated heat  
2. Storage temperature Range  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
ー40～＋85℃  
FL05□ Type  
FL06BT Type  
3. Rated current  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
Within the specified tolerance  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA  
: The maximum DC value having inductance within 10% and temperature incease within 40℃ (LA:20℃) by the application of DC bias.  
LHL□□□ : The maximum DC value having inductance decrease within 10% (LHLC08, LHLC10：within 30%) and temperature increase within the following specified  
temperature by the application of DC bias.  
Reference temperature : 25℃ (LHL08, LHL10, LHL13)  
: 30℃ (LHL16, LHLP□□)  
: 40℃ (LHLC08, LHLC10)  
FB  
FL  
: No disconnection or appearance abnormality by continuous current application for 30 min. Change after the application shall be within ±20% of the initial value.  
This is not guaranteed for electrial characteristics during current application.  
: The maximum DC value having temperature rise within specified value.  
4. Impedance  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
Within the specified tolerance  
Refer to individual specification  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
FB  
: Measuring equipment : Impedance analyzer (HP4191A) or its equivalent  
Measuring frequency : Specified frequency  
FL06BT : Measuring equipment : 4291A (HP) or its equivalent  
Measuring frequency : Specified frequency  
5. Inductance  
LA Type  
CAL45 Type  
Within the specified tolerance  
LHL□□□  
FBA/FBR  
FL05□ Type  
Within the specified tolerance  
FL06BT Type  
【Test Method and Remarks】  
LA, CA  
: Measuring equipment : LCR meter (HP4285A + HP42851A or its equivalent)  
Measuring frequency : Specified frequency  
LHL□□□ : Measuring equipment : LCR meter (HP4285A＋HP42851A or its equivalent)  
LCR meter (HP4263A) or its equivalent (at 1kHz)  
Measuring frequency : Specified frequency  
FL05R□ : Measuring equipment : HP4262A or its equivalent  
Measuring frequency : 1kHz  
6. Q  
LA Type  
Within the specified tolerance  
CAL45 Type  
LHL□□□  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA : Measuring equipment : LCR meter (HP4285A + HP42851A or its equivalent)  
Measuring frequency : Specified frequency  
LHL□□□ (except LHLP) : Measuring equipment : LCR meter (HP4285A＋HP42851A or its equivalent)  
LCR meter (HP4263A) or its equivalent (at 1kHz)  
Measuring frequency : Specified frequency  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
le0104fi01_reli_e-01  
le0104fi01_reli-RP1  
■ RELIABILITY DATA  
7. DC Resisitance  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
Within the specified tolerance  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA : Measuring equipment : low ohmmeter (A&D AD5812 or its equivalent)  
LHL□□□・FB・FL : Measuring equipment : DC ohmmeter  
8. Self resonance frequency  
LA Type  
Within the specified tolerance  
CAL45 Type  
LHL□□□  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA : Measuring equipment : Network analyzer (Anritsu MS620J or its equivalent)  
LHL□□□ (except LHLP) : Measuring equipment : (HP4191A, 4192A) its equivalent  
9. Temperature characteristic  
LA Type  
△L/L : Within ±5%  
CAL45 Type  
LHL□□□  
△L/L : Within ±7% (except LHLP16 : Within ±20%)  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA : Change of maximum inductance deviation in step 1 to 5  
Step  
Temperature (℃)  
1
2
3
4
5
20  
ー25 (Minimum operating temperature)  
20 (Standard temperature)  
＋85 (Maximum operating temperature)  
20  
LHL□□□ : Change of maximum inductance deviation in step 1 to 5  
Temperature at step 1 : 20℃  
Temperature at step 2 : Minimum operating temperature  
Temperature at step 3 : 20℃ (Standard temperature)  
Temperature at step 4 : Maximum operating temperature  
Temperature at step 5 : 20℃  
10. Tensile strength test  
LA Type  
CAL45 Type  
No abnormality such as cut lead, or looseness.  
LHL□□□  
FBA/FBR  
No abnormality such as cut lead, or looseness.  
No abnormality such as cut lead, or looseness.  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA  
: Apply the stated tensile force progressively in the direction to draw terminal.  
force (N)  
25  
duration (s)  
5
CA  
: Apply the stated tensile force progressively in the direction to draw terminal.  
force (N)  
10  
duration (s)  
10  
LHL□□□ : Apply the stated tensile force progressively in the direction to draw terminal.  
Nominal wire diameter tensile φd (mm)  
force (N)  
duration (s)  
0.3＜φd≦0.5  
5
0.5＜φd≦0.8  
0.8＜φd≦1.2  
10  
25  
30±5  
FBA/FBR : The body of a component shall be fixed and a tensile force of 20±1N shall be applied to the lead wire in the axial diretion of the component during 10±1 seconds.  
FL05R□ : Fix the body of a component in the direction to draw terminal,and gradually apply the tensile force of 4.9N.  
11. Over current  
LA Type  
No emission of smoke no firing.  
CAL45 Type  
There shall be no scorch or short of wire.  
LHL□□□  
LHLC08,LHLC10 : There shall be no firing.  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LHL□□□/LA・CAL45 Type：Measuring current  
Duration  
: Rated current×2  
: 5 min.  
Number of measuring  
: one time  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
le0104fi01_reli_e-01  
le0104fi01_reli-RP2  
■ RELIABILITY DATA  
12. Terminal strength : bending  
LA Type  
CAL45 Type  
No abnormality such as cut lead, or looseness.  
LHL□□□  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA : Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the initial position. This operation  
is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.  
Number of bends : Two times.  
Nominal wire diameter tensile  
Bending force  
(N)  
Mass reference weight  
(kg)  
φd (mm)  
0.3＜φd≦0.5  
0.5＜φd≦0.8  
2.5  
5
0.25  
0.50  
LH・FB : Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the initial position. This operation  
is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.  
Number of bends : Two times.  
Nominal wire diameter tensile  
Bending force  
(N)  
Mass reference weight  
(kg)  
φd (mm)  
0.3＜φd≦0.5  
0.5＜φd≦0.8  
0.8＜φd≦1.2  
2.5  
5
0.25  
0.5  
10  
1.0  
13. Insulation resisitance : between the terminals and body  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
100MΩ min.  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LHL□□□ : Applied voltage : 500 VDC  
Duration  
: 60 sec.  
14. Insulation resistance : between terminals and core  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
1MΩ min. (Other than materail code MA)  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
FBA・FBR : Applied voltage : 100 VDC  
Duration  
: 60±5 sec.  
15. Withstanding : between the terminals and body  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
No abnormality such as insulation damage  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LHL□□□ : Accoding to JIS C5102. 7. 1. 3 (C)  
Metal global method  
Applied voltage : 500 VDC  
Duration  
: 60 sec.  
16. DC bias characteristic  
LA Type  
△L/L : Within ー10%  
CAL45 Type  
LHL□□□  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA : Measure inductance with appliation of rated current using LCR meter to compare it with the initial value.  
17. Body strength  
LA Type  
No abnormality as damage.  
CAL45 Type  
LHL□□□  
FBA/FBR  
No abnormality such as cracks on body.  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA  
: Applied force : 30N  
Duration  
Speed  
: 10 sec.  
: Shall attain to specified force in 2 sec.  
CAL45 : Applied force : 50N  
Duration  
Speed  
: 10 sec.  
: Shall attain to specified force in 2 sec.  
FBA  
: Applied force : 50±3N  
Duration : 30±1 sec.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
le0104fi01_reli_e-01  
le0104fi01_reli-RP3  
■ RELIABILITY DATA  
18. Resisitance to vibration  
LA Type  
△L/L : Within ±5%ꢀQ : 30min  
△L/L : Within ±5%  
CAL45 Type  
LHL□□□  
Appearance : No abnomality  
△L/L : Within ±5%  
Q change : Within ±30% (LHLP : only △L/L)  
FBA/FBR  
Appearance : No abnomality  
Impedance change : Within ±20%  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA  
: Directions  
: 2 hrs each in X, Y and Z directions total : 6hrs.  
Frequency range : 10 to 55 to 10Hz (1min.)  
Amplitude : 1.5mm  
Mounting method : Soldering onto printed board.  
Recovery : At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.  
LHL□□□・FB：Directions  
: 2 hrs each in X, Y and Z directions total : 6hrs.  
Frequency range : 10 to 55 to 10Hz (1min.)  
Amplitude  
: 1.5mm (But don't exceed acceleration 196m/s2 (two power))  
Mounting method : Soldering onto printed board.  
19. Resistance to shock  
LA Type  
No significant abnormality in appearance  
CAL45 Type  
LHL□□□  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA  
:
Drop test  
Impact material : concrete or vinyl tile  
Height : 1m  
Total number of drops : 10 times  
20. Solderability  
LA Type  
At least 75％ of terminal electrode is covered by new solder.  
CAL45 Type  
LHL□□□  
FBA/FBR  
At least 75％ of terminal electrode is covered by new solder.  
At least 90％ of terminal electrode is covered by new solder.  
FL05□ Type  
FL06BT Type  
At least 75％ of terminal electrode is covered by new solder.  
【Test Method and Remarks】  
LA, CA  
: Solder temperature : 230±5℃  
Duration : 2±0.5 sec.  
LHL□□□ : Solder temperature : 235±5℃  
Duration  
Immersion depth  
: 2±0.5 sec.  
: Up to 1.5mm from bottom of case.  
FB  
: Solder temperature : 230±5℃  
Duration  
: 3±1 sec.  
Immersion depth  
: Up to 1.5mm from terminal root.  
FL05R□ : Solder temperature : 230±5℃  
Duration  
Immersion depth  
: 2±0.5 sec.  
: Up to 2 to 2.5mm from terminal root.  
FL06BT  
: Solder temperature : 230±5℃  
Duration  
: 3±1 sec.  
Immersion depth  
: Up to 0.5 to 1.0mm from terminal root.  
21. Resisitance to soldering heat  
LA Type  
No significant abnormality in appearance  
△L/L : Within ±5%  
CAL45 Type  
LHL□□□  
FBA/FBR  
No significant abnormality in appearance  
No significant abnormality in appearance  
Refer to individual specification  
Inductance change : Within ±5%  
Impedance change : Within ±20%  
Q change : Within ±30%(LHLP : only △L/L)  
FL05□ Type  
FL06BT Type  
No significant abnormality in appearance  
Impedance change : Within ±20%  
【Test Method and Remarks】  
LA, CA  
: Solder temperature : (CA) 270±5℃, (LA) 260±5℃  
Duration  
: 5±0.5 sec. One time  
Immersed conditions : Inserted into substrate with t=1.6mm  
Recovery  
: At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.  
LHL□□□ : Solder bath method : Solder temperature : 260±5℃  
Duration  
: 10±1 sec.  
Up to 1.5mm from the bottom of case.  
Manual soldering  
: Solder temperature : 350±10℃ (At the tip of soldering iron)  
Duration  
: 5±1 sec.  
Up to 1.5mm from the bottom of case.  
Caution  
: No excessive pressing shall be applied to terminals.  
Recovery  
: 4 to 24hrs of recovery under the standard condition after the test.  
FB  
FL  
: Solder bath method : Condition 1 : Solder temperature : 260±5℃  
Duration  
: 10±1 sec.  
Immersion depth  
: Up to 1.5mm from the terminal root.  
Condition 2 : Solder temperature : 350±5℃  
Duration  
Immersion depth  
: 3±1 sec.  
: Up to 1.5mm from the terminal root.  
Recovery  
: 3hrs of recovery under the standard condition after the test.  
: Solder condition  
Immersion depth  
Recovery  
: 260±5℃  
10±1 sec.  
: Up to 0.5 to 1.0mm from the terminal root.  
: 3hrs of recovery under the standard condition after the test.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
le0104fi01_reli_e-01  
le0104fi01_reli-RP4  
■ RELIABILITY DATA  
22. Resisitance to solvent  
LA Type  
Please avoid the ultrasonic cleaning of this product.  
No significant abnormality in appearance  
CAL45 Type  
LHL□□□  
FBA/FBR  
Impedance change : Within ±20%  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
FB : Solvent temperature : 20～25℃  
Duration  
Solvent type  
Recovery  
: 30±5 sec.  
: Acetone  
: 3hrs of recovery under the standard condition after the test.  
23. Thermal shock  
LA Type  
△L/L : Within ±10%ꢀQ : 30min  
△L/L : Within ±10%  
CAL45 Type  
LHL□□□  
FBA/FBR  
Appearance : No abnormality  
Appearance : No abnormality  
Refer to individual specification  
Appearance : No abnormality  
Inductance change : Within ±10%  
Impedance change : Within ±20%  
Q change : Within ±30% (LHLP：only △L/L)  
FL05□ Type  
FL06BT Type  
Impedance change : Within ±20%  
【Test Method and Remarks】  
LA, CA  
: Conditions for 1cycle  
Step  
Temperature (℃)  
Duration (min.)  
30±3  
Within 3  
30±3  
＋0  
ー3  
1
2
3
4
ー25  
Room temperature  
＋2  
＋85  
ー0  
Room temperature  
Within 3  
Number of cycles : 5 cycles  
Recovery : At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs.  
LHL□□□・FB : Accoding to JIS C0025  
Conditions for 1 cycle  
Step  
Temperature (℃)  
Minimum operating temperature  
Room temperature  
Duration (min.)  
30±3  
Within 3  
30±3  
＋0  
ー3  
1
2
3
4
＋2  
ー0  
Minimum operating temperature  
Room temperature  
Within 3  
Number of cycles : 10 cycles〔LHL□□□〕  
: 5 cycles (FBA, FBR)  
Recovery  
: 4 to 24hrs of recovery under the standard condition after the removal from the test chamber.〔LHL□□□〕  
: 3hrs of recovery under the standard condition after the removal from the test chamber. (FBA, FBR)  
FL  
: Accoding to JIS C0025  
Conditions for 1 cycle  
Step  
Temperature (℃)  
Duration (min.)  
30±3  
Within 3  
30±3  
＋0  
ー3  
1
2
3
4
ー25  
Room temperature  
＋2  
＋85  
ー0  
Room temperature  
Within 3  
Number of cycles : 10 cycles  
Recovery  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
24. Damp heat  
LA Type  
△L/L : Within ±10%ꢀQ : 30min  
△L/L : Within ±10%  
CAL45 Type  
LHL□□□  
FBA/FBR  
Appearance：No abnormality  
Impedance change：Within ±20%  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA : Temperature : 40±2℃  
Humidity  
Duration  
Recovery  
: 90～95%RH  
: 1000 hrs  
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.  
FB : Temperature : 60±2℃  
Humidity  
Duration  
Recovery  
: 90～95%RH  
: 1000 hrs  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
le0104fi01_reli_e-01  
le0104fi01_reli-RP5  
■ RELIABILITY DATA  
25. Loading under damp heat  
LA Type  
△L/L : Within ±10%ꢀQ : 30min  
△L/L : Within ±10%  
CAL45 Type  
LHL□□□  
FBA/FBR  
Appearance : No abnormality  
Imductance change : Within ±10%  
Impedance change : Within ±20%  
Q change : Within ±30% (LHLP : only △L/L)  
FL05□ Type  
FL06BT Type  
Refer to individual specification  
Appearance : No abnormality  
【Test Method and Remarks】  
LA, CA  
: Temperature  
Humidity  
: 40±2℃  
: 90～95%RH  
Duration  
: 1000 hrs  
Applied current : Rated current  
Recovery  
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.  
LHL□□□ : Temperature  
Humidity  
: 40±2℃  
: 90～95%RH  
: 1000±24 hrs  
Duration  
Applied current : Rated current  
Recovery  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
FL  
: Temperature  
Humidity  
Duration  
: 60±3℃  
: 90～95%RH  
: 500 (＋12, ー0) hrs  
Applied current : Rated current  
Recovery  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
26. Loading at high temperature  
LA Type  
△L/L : Within ±10%ꢀQ : 30min  
△L/L : Within ±10%  
CAL45 Type  
LHL□□□  
FBA/FBR  
FL05□ Type  
FL06BT Type  
【Test Method and Remarks】  
LA, CA  
: Temperature  
Duration  
: 85±2℃  
: 1000 hrs  
Applied current : Rated current  
Recovery : At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.  
27. Low temperature life test  
LA Type  
△L/L : Within ±10%ꢀQ : 30min  
△L/L : Within ±10%  
CAL45 Type  
LHL□□□  
FBA/FBR  
Appearance : No abnormality  
Inductance change : Within ±10%  
Impedance change : Within ±20%  
Q change : Within ±30% (LHLP : only △L/L)  
FL05□ Type  
FL06BT Type  
Refer to individual specification  
Appearance : No abnormality  
【Test Method and Remarks】  
LA, CA  
: Temperature : ー25±2℃  
Duration  
: 1000 hrs  
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.  
Recovery  
LHL□□□ : Temperature : ー40±3℃  
Duration  
Recovery  
: 1000±24 hrs  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
FL  
: Temperature : ー40±3℃  
Duration  
: 500 (＋12, ー0) hrs  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
Recovery  
28. High temperature life test  
LA Type  
CAL45 Type  
LHL□□□  
FBA/FBR  
Appearance : No abnormality  
Inductance change : Within ±10%  
Impedance change : Within ±20%  
Q change : Within ±30% (LHLP : only △L/L)  
FL05□ Type  
FL06BT Type  
Refer to individual specification  
Appearance : No abnormality  
【Test Method and Remarks】  
LHL□□□ : Temperature : 105±3℃  
Duration  
Recovery  
: 1000±24 hrs  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
FL  
: Temperature : 85±3℃  
Duration  
: 500 (＋12, ー0) hrs  
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.  
Recovery  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
le0104fi01_reli_e-01  
le0104fi01_reli-RP6  
■ PRECAUTIONS  
CAL Type, LH Type, FB Type, FL Type, LA Type  
1. Circuit Design  
◆Operating environment  
1.The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,  
Precautions  
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high  
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where  
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.  
2. PCB Design  
◆Design  
Precautions  
1.Please design insertion pitches as matching to that of leads of the component on PCBs.  
Technical ◆Design  
consider-  
ations  
1.When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will cause breakage of  
the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.  
3. Considerations for automatic placement  
◆Adjustment of mounting machine  
1.Excessive impact load should not be imposed on the products when mounting onto the PC boards.  
Precautions  
2.Mounting and soldering conditions should be checked beforehand.  
Technical  
consider-  
ations  
◆Adjustment of mounting machine  
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.  
4. Soldering  
◆Wave soldering  
1. Please refer to the specifications in the catalog for a wave soldering.  
2. Do not immerse the entire inductor in the flux during the soldering operation.  
◆Lead free soldering  
1.When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, soldering etc  
sufficiently.  
Precautions  
Recommended conditions for using a soldering iron:  
・Put the soldering iron on the land-pattern.  
・Soldering iron's temperature - Below 350℃  
・Duration - 3 seconds or less  
・The soldering iron should not directly touch the inductor.  
◆Reflow soldering  
1. As for reflow soldering, please contact our sales staff.  
Technical ◆Lead free soldering  
consider-  
ations  
1.If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of  
the products.  
5. Cleaning  
Precautions  
◆Cleaning conditions  
1. CAL type, LH type, LA Type  
Please do not do cleaning by a supersonic wave.  
Technical ◆Cleaning conditions  
consider-  
ations  
1. CAL type, LH type, LA Type  
If washing by supersonic waves, supersonic waves may deform products.  
6. Handling  
◆Handling  
1. Keep the inductors away from all magnets and magnetic objects.  
◆Mechanical considerations  
1. Please do not give the inductors any excessive mechanical shocks.  
Precautions  
2. LH type  
If inductors are dropped onto the floor or a hard surface they should not be used.  
◆Packing  
1. Please do not give the inductors any excessive mechanical shocks.  
In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading / fragile item).  
◆Handling  
1. There is a case that a characteristic varies with magnetic influence.  
◆Mechanical considerations  
Technical  
consider-  
ations  
1. There is a case to be damaged by a mechanical shock.  
2. LH type  
There is a case to be broken by a fall.  
◆Packing  
1. There is a case that a lead wire could be deformed by a fall or an excessive shock.  
7. Storage conditions  
◆Storage  
1.To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should  
be controlled.  
Recommended conditions  
Precautions  
・Ambient temperature 0～40℃  
・Humidity  
Below 70% RH  
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.  
For this reason, inductors should be used within one year from the time of delivery.  
In case of storage over 6 months, solderability shall be checked before actual usage.  
Technical ◆Storage  
consider-  
ations  
1.Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of  
taping/packaging materials may take place.  
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.  
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.  
le0104fi01_reli_e-01  
le0104fi01_reli-RP7  

LALAL02TB1R2K 相关器件

型号 制造商 描述 价格 文档
LALAL02TB2R2K TAIYO YUDEN General Purpose Inductor, 2.2uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TB390K TAIYO YUDEN General Purpose Inductor, 39uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TB3R3K TAIYO YUDEN General Purpose Inductor, 3.3uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TB3R9K TAIYO YUDEN General Purpose Inductor, 3.9uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TB470K TAIYO YUDEN General Purpose Inductor, 47uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TB4R7K TAIYO YUDEN General Purpose Inductor, 4.7uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TB8R2K TAIYO YUDEN General Purpose Inductor, 8.2uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TBR27K TAIYO YUDEN General Purpose Inductor, 0.27uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02TBR47K TAIYO YUDEN General Purpose Inductor, 0.47uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT 获取价格
LALAL02VA100K TAIYO YUDEN General Purpose Inductor, 10uH, 10%, 1 Element, Ferrite-Core 获取价格

LALAL02TB1R2K 相关文章

  • TL431 恒流源电路：电流要求、原理及常用应用电路探讨
    2025-06-20
    7
  • 英特尔发声：未来芯片制造刻蚀或成关键
    2025-06-20
    15
  • CXL 联盟迅猛前行，角逐存储市场下一场 “军备竞赛”
    2025-06-20
    11
  • “流星一号”：世界首颗超高并行光计算集成芯片的技术革新
    2025-06-19
    22

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 规格参数
  • 数据手册
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286