34150215

更新时间:2024-11-11 11:12:20
品牌:WURTH
描述:WE-LTS Conductive Shielding Gasket Stampings

34150215 概述

WE-LTS Conductive Shielding Gasket Stampings

34150215 数据手册

通过下载34150215数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Dimensions: [mm]  
Electrical Properties:  
Properties  
Value  
Unit  
Shielding Effectiveness @ 100  
MHz  
80  
dB  
Shielding Effectiveness @ 1 GHz  
Surface Resistance  
86  
0.08  
15  
dB  
Ω
RS  
44,75 ±0,3  
20°  
Number of Poles  
2 ±0,3  
Certification:  
RoHS Approval  
Compliant [2011/65/EU&2015/863]  
Conform or declared [(EC)1907/2006]  
REACh Approval  
33,3 ±0,3  
General Information:  
Operating Temperature  
-40 up to +85 °C  
Storage Conditions (in original  
packaging)  
< -40 °C ; < 75 % RH  
Moisture Sensitivity Level (MSL)  
1
non-inflammable/ self-extinguishing  
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently  
Scale 1,5:1  
Material  
Metallized Fiber  
Polyether Urethane Foam  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
JoV  
003.002  
2019-05-08  
DIN ISO 2768-1m  
Rayon Paper with acrylic  
adhesive  
DESCRIPTION  
WE-LTS Conductive Shielding  
Gasket Stampings  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
Reactive Polyurethane Hotmelt  
Adhesive  
ORDER CODE  
34150215  
74638 Waldenburg  
Germany  
BUSINESS UNIT  
STATUS  
PAGE  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
eiSos  
Valid  
1/3  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  
Typical Shielding Effectiveness:  
100  
80  
60  
40  
20  
0
0,1  
1
10  
Frequency [GHz]  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
JoV  
003.002  
2019-05-08  
DIN ISO 2768-1m  
DESCRIPTION  
WE-LTS Conductive Shielding  
Gasket Stampings  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
74638 Waldenburg  
Germany  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
ORDER CODE  
34150215  
BUSINESS UNIT  
STATUS  
PAGE  
eiSos  
Valid  
2/3  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  
6. Product Life Cycle  
Important Notes  
Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a  
standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage  
about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be  
available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product  
availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not  
apply in the case of individual agreements deviating from the foregoing for customer-specific products.  
The following conditions apply to all goods within the product range of Würth Elektronik  
eiSos GmbH & Co. KG:  
1. General Customer Responsibility  
Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain  
application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the  
areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The  
responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this  
fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product  
characteristics described in the product specification is valid and suitable for the respective customer application or not.  
7. Property Rights  
All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as  
well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth  
Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or  
implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination,  
application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.  
2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications  
8. General Terms and Conditions  
It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime  
cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.  
In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or  
failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable  
design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic  
component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be  
downloaded at www.we-online.com.  
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth  
Elektronik eiSos Group, last version available at www.we-online.com.  
3. Best Care and Attention  
Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.  
4. Customer Support for Product Specifications  
Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve  
specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales  
person in charge should be contacted who will be happy to support in this matter.  
5. Product R&D  
Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the  
Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries  
regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the  
customer as per Section 1 and 2 remains unaffected.  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
JoV  
003.002  
2019-05-08  
DIN ISO 2768-1m  
DESCRIPTION  
WE-LTS Conductive Shielding  
Gasket Stampings  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
74638 Waldenburg  
Germany  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
ORDER CODE  
34150215  
BUSINESS UNIT  
STATUS  
PAGE  
eiSos  
Valid  
3/3  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  

34150215 相关器件

型号 制造商 描述 价格 文档
34150225 WURTH WE-LTS Conductive Shielding Gasket Stampings 获取价格
34150237 WURTH WE-LTS Conductive Shielding Gasket Stampings 获取价格
34151 MACOM TERMINAL, RING TONGUE, PLASTI-GRIP WIRE SIZE, 22-16 AWG 获取价格
34152C MURATA Shielded Surface Mount Inductors 获取价格
34153C MURATA Shielded Surface Mount Inductors 获取价格
34154C MURATA Shielded Surface Mount Inductors 获取价格
34157 MACOM TERMINAL, RING TONGUE, PLASTI-GRIP WIRE SIZE 获取价格
3416-0000 ETC Fits standard IC sockets 获取价格
3416-0000PR ETC designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable 获取价格
3416-0000S ETC designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable 获取价格

34150215 相关文章

  • ADI收购eFPGA公司,可重构芯片引领FPGA发展新风向
    2024-11-13
    3
  • LG Display震撼发布:全球首款50%伸缩率柔性显示屏原型机亮相
    2024-11-13
    5
  • 东京电子(TEL)财报预测:净利润激增45%,中国市场占比显著增至45%
    2024-11-13
    5
  • Nordic Semiconductor 宣布裁员并取消收购 Novelda,UWB技术前景生变
    2024-11-13
    4