转到网站首页
转为中文步骤:
1、请用电脑端360浏览器打开本页地址,如您电脑未安装360浏览器,请点这里下载;
2、点击360浏览器右上角的翻译插件,如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可;
1N4001, 1N4002, 1N4003,  
1N4004, 1N4005, 1N4006,  
1N4007  
1N4004 and 1N4007 are Preferred Devices  
Axial Lead Standard  
Recovery Rectifiers  
http://onsemi.com  
This data sheet provides information on subminiature size, axial  
lead mounted rectifiers for general–purpose low–power applications.  
LEAD MOUNTED RECTIFIERS  
50–1000 VOLTS  
Mechanical Characteristics  
Case: Epoxy, Molded  
Weight: 0.4 gram (approximately)  
DIFFUSED JUNCTION  
Finish: All External Surfaces Corrosion Resistant and Terminal  
Leads are Readily Solderable  
Lead and Mounting Surface Temperature for Soldering Purposes:  
220°C Max. for 10 Seconds, 1/16from case  
CASE 59–03  
AXIAL LEAD  
PLASTIC  
Shipped in plastic bags, 1000 per bag.  
Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to  
the part number  
MARKING DIAGRAM  
Available in Fan–Fold Packaging, 3000 per box, by adding a “FF”  
suffix to the part number  
AL  
1N  
400x  
YYWW  
Polarity: Cathode Indicated by Polarity Band  
Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006,  
AL  
= Assembly Location  
1N4007  
1N400x = Device Number  
x
YY  
WW  
= 1, 2, 3, 4, 5, 6 or 7  
= Year  
= Work Week  
MAXIMUM RATINGS  
Rating  
Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007  
Unit  
*Peak Repetitive Reverse Voltage  
Working Peak Reverse Voltage  
DC Blocking Voltage  
V
V
V
50  
100  
200  
400  
600  
800  
1000  
Volts  
RRM  
RWM  
R
*Non–Repetitive Peak Reverse Voltage  
(halfwave, single phase, 60 Hz)  
V
60  
35  
120  
70  
240  
140  
480  
720  
420  
1000  
560  
1200  
700  
Volts  
RSM  
*RMS Reverse Voltage  
V
280  
1.0  
Volts  
Amp  
R(RMS)  
*Average Rectified Forward Current  
(single phase, resistive load,  
I
O
60 Hz, T = 75°C)  
A
*Non–Repetitive Peak Surge Current  
(surge applied at rated load  
conditions)  
I
30 (for 1 cycle)  
–65 to +175  
Amp  
FSM  
Operating and Storage Junction  
Temperature Range  
T
J
°C  
T
stg  
*Indicates JEDEC Registered Data  
ORDERING INFORMATION  
See detailed ordering and shipping information on page 2 of  
this data sheet.  
Preferred devices are recommended choices for future use  
and best overall value.  
Semiconductor Components Industries, LLC, 2001  
1
Publication Order Number:  
March, 2001 – Rev. 7  
1N4001/D  
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007  
ELECTRICAL CHARACTERISTICS*  
Rating  
Symbol  
Typ  
Max  
Unit  
Maximum Instantaneous Forward Voltage Drop  
v
0.93  
1.1  
Volts  
F
(i = 1.0 Amp, T = 25°C)  
F
J
Maximum Full–Cycle Average Forward Voltage Drop  
(I = 1.0 Amp, T = 75°C, 1 inch leads)  
V
F(AV)  
0.8  
Volts  
O
L
Maximum Reverse Current (rated dc voltage)  
(T = 25°C)  
(T = 100°C)  
J
I
R
µA  
0.05  
1.0  
10  
50  
J
Maximum Full–Cycle Average Reverse Current  
I
30  
µA  
R(AV)  
(I = 1.0 Amp, T = 75°C, 1 inch leads)  
O
L
*Indicates JEDEC Registered Data  
ORDERING & SHIPPING INFORMATION  
Device  
1N4001  
Package  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Axial Lead  
Shipping  
1000 Units/Bag  
3000 Units/Box  
5000/Tape & Reel  
1000 Units/Bag  
3000 Units/Box  
5000/Tape & Reel  
1000 Units/Bag  
3000 Units/Box  
5000/Tape & Reel  
1000 Units/Bag  
3000 Units/Box  
5000/Tape & Reel  
1000 Units/Bag  
3000 Units/Box  
5000/Tape & Reel  
1000 Units/Bag  
3000 Units/Box  
5000/Tape & Reel  
1000 Units/Bag  
3000 Units/Box  
5000/Tape & Reel  
1N4001FF  
1N4001RL  
1N4002  
1N4002FF  
1N4002RL  
1N4003  
1N4003FF  
1N4003RL  
1N4004  
1N4004FF  
1N4004RL  
1N4005  
1N4005FF  
1N4005RL  
1N4006  
1N4006FF  
1N4006RL  
1N4007  
1N4007FF  
1N4007RL  
http://onsemi.com  
2
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007  
PACKAGE DIMENSIONS  
AXIAL LEAD  
CASE 59–03  
ISSUE M  
B
NOTES:  
1. ALL RULES AND NOTES ASSOCIATED WITH  
JEDEC DO-41 OUTLINE SHALL APPLY.  
2. POLARITY DENOTED BY CATHODE BAND.  
3. LEAD DIAMETER NOT CONTROLLED WITHIN F  
DIMENSION.  
D
K
MILLIMETERS  
DIM MIN MAX  
INCHES  
MIN  
MAX  
0.205  
0.107  
0.034  
0.050  
---  
F
A
B
D
F
4.07  
2.04  
0.71  
---  
5.20 0.160  
2.71 0.080  
0.86 0.028  
A
K
1.27  
---  
---  
1.100  
K
27.94  
F
http://onsemi.com  
3
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007  
ON Semiconductor and  
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes  
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular  
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,  
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or  
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be  
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.  
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications  
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or  
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold  
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable  
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim  
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.  
PUBLICATION ORDERING INFORMATION  
NORTH AMERICA Literature Fulfillment:  
CENTRAL/SOUTH AMERICA:  
Literature Distribution Center for ON Semiconductor  
P.O. Box 5163, Denver, Colorado 80217 USA  
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)  
Email: ONlit–spanish@hibbertco.com  
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada  
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada  
Email: ONlit@hibbertco.com  
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –  
then Dial 866–297–9322  
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support  
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)  
Toll Free from Hong Kong & Singapore:  
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada  
N. American Technical Support: 800–282–9855 Toll Free USA/Canada  
001–800–4422–3781  
EUROPE: LDC for ON Semiconductor – European Support  
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)  
Email: ONlit–german@hibbertco.com  
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)  
Email: ONlit–french@hibbertco.com  
Email: ONlit–asia@hibbertco.com  
JAPAN: ON Semiconductor, Japan Customer Focus Center  
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031  
Phone: 81–3–5740–2700  
Email: r14525@onsemi.com  
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)  
Email: ONlit@hibbertco.com  
ON Semiconductor Website: http://onsemi.com  
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781  
For additional information, please contact your local  
Sales Representative.  
*Available from Germany, France, Italy, UK, Ireland  
1N4001/D