转到网站首页
转为中文步骤:
1、请用电脑端360浏览器打开本页地址,如您电脑未安装360浏览器,请点这里下载;
2、点击360浏览器右上角的翻译插件,如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可;
SAW Bandpass Filter F1G5B  
Features  
RF bandpass filter  
High attenuation  
Usable bandwidth 30MHz  
No matching 50single-ended operation  
Ceramic Surface Mounted Device (SMD) Package ( 3.0 mm * 3.0 mm )  
RoHS Compliant  
Package Dimension – SMD 3.0 × 3.0  
1
2
3
6
5
4
6
5
4
1
2
3
I
1G5B  
Pin Configuration  
Dimensions shown are nominal in millimeters  
2
5
Input  
Output  
Body : Al2O3 Ceramic  
Lid : Kovar, Ni Plated  
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um  
Ni Plating  
1, 3, 4, 6  
Case ground  
Maximum Ratings  
Parameter  
Unit  
Minimum  
Typical  
Maximum  
Operating Temperature Range  
Storage Temperature Range  
Power Handling Capability  
Electrostatics Sensitive Device (ESD)  
-30  
-40  
-
25  
25  
-
80  
80  
10  
dBm  
Part No.  
F1G5B  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
Rev. Date  
Rev.  
2011-06-22  
NWMF01-AS01  
1/7  
SAW Bandpass Filter F1G5B  
Specifications  
Fc = 1538.5 MHz  
Terminating source impedance : 50Ω  
Terminating load impedance : 50Ω  
Minimum  
Typical  
1538.5  
2.0  
Maximum  
Unit  
MHz  
dB  
Center Frequency ( Fc )  
-
-
-
-
-
-
Insertion Loss (1547.5 MHz)  
Insertion Loss (In Fc +/- 15 MHz)  
Amplitude Ripple (In Fc +/- 15 MHz)  
VSWR (In Fc +/- 15 MHz)  
3.5  
3.5  
1.5  
2.0  
2.0  
dB  
0.9  
dBp-p  
1.5  
Relative Attenuation  
0.3 ~ 1100 MHz  
27  
27  
30  
30  
30  
34  
-
-
-
1100 ~ 1400 MHz  
1740 ~ 2200 MHz  
dB  
Input/Output Impedance  
-
50  
-
Ohms  
Notes :  
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and  
full 2 port calibration.  
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing  
tolerances  
Part No.  
Rev. Date  
Rev.  
F1G5B  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2011-06-22  
2/7  
NWMF01-AS01  
SAW Bandpass Filter F1G5B  
Matching Schematic  
( Actual matching values may vary due to PCB layout and parasitics )  
Input  
Output  
50  
50  
Ω
Ω
Marking Configuration  
1)  
I2)  
1G5B3)  
1) Pad Number 1 Index  
2) Manufacturer name  
3) Marking Number  
* Ink or Laser Marking available  
Part No.  
Rev. Date  
Rev.  
F1G5B  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2011-06-22  
3/7  
NWMF01-AS01  
SAW Bandpass Filter F1G5B  
Typical Performance ( at 25)  
Part No.  
Rev. Date  
Rev.  
F1G5B  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2011-06-22  
4/7  
NWMF01-AS01  
SAW Bandpass Filter F1G5B  
Input / Output VSWR Charts  
Input / Output Smith Charts  
Part No.  
Rev. Date  
Rev.  
F1G5B  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2011-06-22  
5/7  
NWMF01-AS01  
SAW Bandpass Filter F1G5B  
Packing Specification  
1. Reeling Quantity : 1000 pcs / reel  
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.  
TOP COVER TAPE  
REEL  
CARRIER TAPE  
Tape Specification  
1. Leader part and vacant position specification  
Vacant  
150mm min.  
Component  
contained  
Vacant  
150mm min.  
Leader part  
250mm min.  
END  
START  
Tape Running Direction  
2. Tensile strength of carrier tape  
4.4N/mm width  
Direction of pull  
Top cover tape  
3. Top cover tape adhesion  
1) pull off angle : 0~15°  
2) speed : 300mm/min  
3) force : 20~70g  
0~ 15 degree  
Carrier tape  
Part No.  
Rev. Date  
Rev.  
F1G5B  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2011-06-22  
NWMF01-AS01  
6/7  
SAW Bandpass Filter F1G5B  
Carrier Tape Dimensions [unit : mm]  
A
B
C
D
E
F
3.40 ± 0.1  
3.40 ± 0.1  
7.25 ± 0.1  
1.70 ± 0.1  
12.00 ± 0.1  
8.00 ± 0.1  
Part Direction  
Tape Running Direction  
Reel Dimensions [unit : mm]  
Part No.  
Rev. Date  
Rev.  
F1G5B  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2011-06-22  
NWMF01-AS01  
7/7