031-0000-344--Datasheet/数据表在线中文翻译

ARINC 600

BKAD/E/F

Low insertion force contacts.

Both environmental and non- environmental

versions.

Polarizing posts that are removable from the

mating face.

Field replaceable inserts for size 22 and

power contacts.

Up to 800 size 22 contacts in one connector.

Crimp, coax, power, printed circuit and wire

wrappable post style contacts.

Uses standard DPX crimp, insertion/extraction

tooling.

Waveguide connections available.

BKAD/E

Rear Release/Rear Removable

BKAF

Front Release/Front Removable

Size 12, 16, 20, 22 Crimp Contacts

Size 22 Solder Tail and Wrap Post Contacts

BKAD/E connectors represent the standard

for new avionic systems developed to support

the air transportation market. Several important

design concerns have been addressed and

solved in this new series. High mating

This new connector is totally intermateable and

intermountable with ARINC 600 connectors now in

the field.

The BKAF permits the user to easily replace a

contact in case of problems, rather than disas-

semble the entire connector--it is available with

size 22 contacts in wrap post or solder-tail ver-

sions. The system maintains the advantages of low

insertion force technology incorporated in all ARINC

600 connectors.

forces of pluggable modules in a rack have been

reduced by approximately two-thirds.

The low insertion force contacts are also inter-

changeable with the contacts used in the DPX

series and permit retrofit of existing equipment.

Pos-Aline Connector Construction Feature

In the ARINC 600 connector series, Size 22 con-

The result is that the complement of contacts for

the plug connectors will consist of pin contacts for

size 22 and socket contacts for all others. The

receptacle contacts will be just the reverse, socket

contact for size 22 and pin contacts for the

balance.

tacts are the only size that utilize this design

feature. The hooded socket extends from its in-

sulator while the pin contacts are shrouded by its

front insulator.

All other contacts used in this series employ stan-

dard contact design.

Material Specifications

BKAD

BKAE

BKAF

Specifications

QQ A-591/A380

MIL-C-5541

Material

Aluminum alloy

Shell & Waveguide

Insulator

Alodine

1200

Alodine

1200

Alodine

1200

Finish

Material

Finish

Thermoset

Copper alloy

Gold over Nickel

Crimp

Thermoset

Copper alloy

Gold over Nickel

Crimp

Thermoset

N/A

Copper alloy

Gold over Nickel

P.C./Wrap Post

QQ-C-533

MIL-G-45204

N/A

Contacts

Termination

Grommets/Seals

O-Ring

Material

N/A

Silicone-based Elastomer

N/A

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

4

ARINC 600

BKAD/E/F

How to Order

D

2

A234

M

3

00 01

*

F0

R

BKA

CONNECTOR SERIES

RoHS

CLASS

SHELL SIZE

CONNECTOR LAYOUT DESCRIPTION

SIZE 1 COAX INSERT MODIFIER

SHELL STYLE

CONNECTOR MOUNTING MODIFIER

POLARIZING POSITION

MODIFIER (Contact, Finish, Material)

* = For Polarizing Position greater then 99, add third digit.

SHELL STYLE

CONNECTOR SERIES

BKA (Per ARINC 600)

RoHS version

3 - Plug (rack side)

Receptacle (box side)

4 -

R

-

RoHS compatible

CONNECTOR MOUNTING MODIFIER

CLASS

00 -

Standard design, .148 dia. holes

D

-

Non-environmental (rear release, crimp

contacts)

01 - With #6-32 ESNA (#12 NCFMA2-62) clinch

nuts (see chart)

E

-

Environmental (rear release, crimp contacts)

Number of Clinch Nuts

Connector

Size

F

Non-environmental (front release, solder

and wrap post #22 contact, rear release

all others)

Plug

Receptacle

1

4

2

3

4

6

8

10

-

Same as E, except uses BKAD shells and

Less 0 rings on plug side.

C

T

Size 1 receptacle only - less 3 printed circuit

board mounting lugs

02 -

Non-environmental connector using filtered

contacts

With #4-40 ESNA (#22 NCFMA2-40) clinch

nuts (see chart)

03 -

08 -

SHELL SIZE

Size 2 and 3 plug and receptacle only - with

#4-40 ESNA (#22 NCFMA2-40) clinch nuts

(all mounting holes)

1

2

3

-

Max. contact capacity - 125

Max. contact capacity - 400

Max. contact capacity - 800

Size 2 and 3 plug and receptacle only - with

#6-32 ESNA (#12 NCFMA2-62) clinch nuts

(all mounting holes)

09 -

CONNECTOR LAYOUT DESCRIPTION

(See page 8)

Same as - 00 mounting modification except

with nickel finished shells .0008 - .0012 thick

22 -

SIZE 1 COAX INSERT MODIFIER

M

Connector contains modified 71W1 or

2W2 insert (four MTG screw hole

locations and coaxial contact used in this

insert are interchangeable between

different manufacturers

-

with EMI grounding spring for plug shells and

supplied with non-environmental inserts.

23 -

With floating eyelets (.048 min. radial float)

4 corner holes per connector.

NOTE: A dash must be inserted whenever code does not apply.

Consult Customer Service if other modifications are required

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

5

ARINC 600

BKAD/E/F

How to Order (continued)

CONNECTOR LAYOUT DESCRIPTION Note: All layouts with "OPEN' insert cavity are not supplied with an insulator. If a Blank insert is required please consult factory.

Three Digit Number Contained within the Shell Layout Indicates Total Number of Contacts Available (including Waveguide)

Shell Cavity Identification

Connector

Shell

Ref. ARINC

Connector

Shell

Ref. ARINC

Layout

Size

Characteristic

Layout

Size

Characteristic

A

OPEN

60

B

OPEN

60

C

D

E

F

A

150

B

10T10

71W1

150

C

D

E

F

-005

1

2

5W2

-T173

234

2

3

13W2

6T6

-060

OPEN

5W2

150

709

727

A060

-065

OPEN

60

A234

-246

-248

250

71W1

120T2

121

OPEN

60

120T2

121

A065

-120

Open

60

5W2

6T6

60

OPEN

5W2

OPEN

150

100

-125

60

250A

-251

-300

-306

-313

-370

-400

-021

-026

-113

BLANK

150

100

-013

OPEN

2W2

OPEN

2W2

13W2

OPEN

13W2

85

Waveguide

150

100

-017

150

OPEN

6T6

-071

OPEN

71W1

Waveguide

71W1

2W2

71W1

OPEN

71W1

Waveguide

71W1A

4W4

150

A071

-085

150

13W2

100

150

120T2

150

A085

86M

150

100

4W4

OPEN

4W4

71W1

2W1

150

4W4

OPEN

4W4

71W1

2W2

150

13W2 BLANK OPEN

OPEN

13W2

100

-093

4W4

13W2

100

OPEN

4W4

71W1

150

OPEN

4W4

71W1

150

-100

OPEN

121

OPEN

10T10

71W1

71W1A

71W1B

150

100

-137

6T6

-A113

-114

13W2

OPEN

13W2

6T6

-T141

-142

120T2

71W1

71W1A

71W1B

2W2

13W2

OPEN

13W2

85

-284

-310

-330M

-A330M

-496

-600

-626

-713

A713

-734

-764

-800

-269M

271C

271M

-326

OPEN

13W2

6T6

-155

155M

V155M

158M

-A158M

-163

2W2

121

2W2

121

2W2

85

150

OPEN

13W2

100

150

OPEN

13W2

100

OPEN

150

13W2

100

150

A163

-164

OPEN

Waveguide

150

13W2

100

150

A164

165M

-A165M

-167

Waveguide

150

3W

708

2W2

150

64

150

100

2W2

150

100

150

100

4W4

150

2W2

4W4

2W2

OPEN

2W2

4W4

2W2

150

13W2

2W2

150

100

732

173M

2W2

71W1B

13W2 BLANK

150

100

13W2

4W4

150

100

OPEN

150

13W2

NOTE. ANY OTHER COMBINATION OF INSERTS WITHIN A SPECIFIC SHELL IS AVAILABLE UPON REQUEST

Layout included in the following ARINC configurations 702, 710, 711, 712, 714, 715, 716, 723.

Layout included in the following ARINC configurations 707, 718 & 730.

Layout included in the following ARINC configurations 701, 702, 703, 704, 705, 706, 724, 725.

Layout included in the following ARINC configurations 701, 717, 726, 729.

POLARIZING POSITION

01 thru 216 (per ARINC 600)

Blank-Polarizing posts or keys not installed but

supplied with connector

MODIFIER (Contact, Finish, Material)

Blank - Rear release, crimp, signal and power

contacts supplied with connector

(when applicable)

SC -

SD -

Front release .025(0.63) D. x .375

WC -

WD -

Front release .025(0.63) Sq. x 500

(12.7) (3 wraps) wrap post and crimp,

rear release power contacts (when ap-

plicable) supplied with connector

Front release .025 (0.64) Sq. x 641

(16.28) (3 wraps) wrap post and

crimp, rear release power contacts

(when applicable) supplied with con-

nector

(9.53) solder post and crimp, rear re-

lease power contacts (when applica-

ble) supplied with connector

FO -

Contacts not supplied with connector

(FO not stamped on connector)

Less contacts and waveguide (FOO not

stamped on connector)

Front release .025(0.63) D. x .500

(12.7) solder post and crimp, rear re-

lease power contacts (when applica-

ble) supplied with connector

FOO -

SA -

Front release .025(0.63) D. x .150

(3.81) solder post and crimp, rear re-

lease power contacts (when applica-

ble) supplied with connector

Front release .025(0.63) Sq. x .250

(6.35) (1 wrap) wrap post and crimp,

rear release power contacts (when ap-

plicable) supplied with connector

Front release .025(0.63 Sq. x .375

(9.53) (2 wraps) wrap post and crimp,

rear relase power contacts (when ap-

plicable) supplied with connector

WA -

WB -

NOTE: COAXIAL CONTACTS TO BE ORDERED SEPARATELY

SB -

Front release .025(0.63) D. x .250

(6.35) solder post and crimp, rear re-

lease power contacts (when applica-

ble) supplied with connector

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

6

ARINC 600

BKAD/E/F

Shell Dimensions - Size 1

Plug

BKAE SERIES

1.402 (35.61)MAX

1.110 (28.19)

1.090 (27.69)

.205 (5.21)*

.195 (4.95)

.130 (3.30)

.120 (3.05)

1.195 (30.35)MAX

.655 (16.64)

.645 (16.38)

.385 (9.78) MAX

1.150(29.21)MIN

BKAD SERIES

1.102 (27.99) MAX

.148 +_ .003 (3.76 +_ 0.08)DIA

4 PLCS MTG HOLES

.653 (16.59)

.647 (16.43)

.125 (3.18)*

A

.5.465 (138.81)

5.455 (138.56)

.105 (2.67)

.180 (4.57)

.166 (4.22)

4 PL

D

A

6.995 MAX

(177.67)

.030 R MAX

(.76)

4 PL

.120 R MAX

(3.05)

^{.135 (3.43)}*

B

6.890

(175.01)

MIN

.115 (2.92)

6.355 (161.42)

6.345 (161.16)

3.825 (97.16)

3.815 (96.90)

B

6.500 MAX

(165.10)

6.645 (168.78)

6.629 (168.38)

4 PL

.6.515 MIN

(165.48)

6.353

(161.37)

6.347

2.059 (52.30)

2.049 (52.04)

(161.21)

1.313 (33.35)

1.303 (33.10)

C

.030 (.76)R

MAX 4 PL

C

.479 (12.17)

.469 (11.91)

.620MIN

(15.75)

.608 MAX

(15.44)

.250

(6.35)

MAX

.135 (3.43)

.125 (3.18)

.188 (4.78)

.184 (4.67)

.830 (21.08)

.820 (20.83)

3.85 (9.78)

3.75 (9.52)

.575 (14.60)

.565 (14.35)

BKAD SERIES

1.198 (30.43) MAX

BKAE SERIES

.191 (4.85)

189 (4.80)

3 PL

.705 (17.91)

.695 (17.65)

1.550 (39.37) MAX

Retainer Plate

Size 1 Plug

Panel Cutout

* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.

For further information, refer to ARINC 600 specification or consult factory.

Receptacle

BKAE SERIES

1.531 (38.89) MAX

BKAD/BKAF SERIES

1.221 (31.01) MAX

^{.205 (5.21)}*

1.010 (25.65)

.990 (25.15)

.195 (4.95)

.240 (6.10)MAX

.191 (4.85) 2 PL

.189 (4.80)

.130 (3.30)

.120 (3.05)

.655 (16.64)

.645 (16.38)

^{.125 (3.18)}*

.105 (2.67)

.148 +_ .003 (3.76 +_ 0.08)DIA

4 PLCS MTG HOLES

.030 R

(.76)

MAX

2 PL

A

5.465 (138.81)

5.455 (138.56)

7.455 MAX

(189.36)

6.355 (161.42)

6.345 (161.16)

^{.135 (3.43)}*

6.870

(174.50)

MIN

B

.115 (2.92)

3.825 (97.16)

3.815 (96.90)

6.627 (168.33)

6.607 (167.82)

6.353

(161.37)

6.347

B

2.059 (52.30)

2.049 (52.04)

(161.21)

.287 R (7.29)

MAX 4 PL

1.313 (33.35)

1.303 (33.10)

.240

(6.10)

MAX

C

.120 R (3.05)

MAX 4 PL

C

.180 (4.57)

D

.166 (4.22)

4 PL

.135 (3.43)

.125 (3.18)

BKAD/BKAF SERIES

1.317 (33.45) MAX

3.65 (9.27)

3.55 (9.02)

.653

(16.59)

.647

.188 (4.78)

.184 (4.67)

.810 (20.57)

.800 (20.32)

.575 (14.60)

.565 (14.35)

BKAE SERIES

1.670 (42.42)

(16.43)

.930 (23.62) MIN

.705 (17.91)

.695 (17.65)

Retainer Plate

Size 1 Receptacle

Panel Cutout

*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.

For further information, refer to ARINC 600 specification or consult factory.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

7

ARINC 600

BKAD/E/F

Shell Dimensions- Size 2

Plug

1.810 (45.97)

1.790 (45.47)

1.431 (36.35)

1.421 (36.09)

BKAE SERIES

1.402 (35.61) MAX

.655 (16.64)

.645 (16.38)

.130 (3.30)

.120 (3.05)

1.195 MAX

(30.35)

.148 +_ 003 (3.76 +_ 0.08) DIA

10 PLCS MTG HOLES

BKAD SERIES

1.102 (27.99) MAX

653 (16.59)

647 (16.43)

260 (6 60)*

250 (6 35)

191 (4.85)

189 (4.80)

3PL

030 (.76) R

MAX 4 PL

.070 (1.78)*

.050 (1.27)

A

B

A

5.355 (136.02)

5.345 (135.76)

030 R

(.76)

MAX

4 PL

6.360 (161.54)

6.340 (161.04)

135 (3.43)*

115 (2.92)

6.353

(161.37)

6.347

6.515 MIN

(165.48)

6 995 MAX

(177.67)

6.500 MAX

(165.10)

B

6.645 (168.78)

6.629 (168.38)

3 770 (95.76)

3 760 (95.50)

161.21

6.890

(175.01)

MIN

120 R

(3.05)

MAX

4 PL

2 004 (50.90)

1 994 (50.65)

.180

(4.57)

166

(4.22)

8 PL

2.135 (54.23)

2.125 (53.98)

C

.620 MIN

(15.75)

1 258 (31.95)

C

D

.608 MAX

(15.44)

1 248 (31.70)

168 (4.27)

158 (4.01)

1.429

(36.30)

1.423

(36.14)

1.850 MIN

(46.99)

188(4.78)

184(4.67)

.865 (21.97)

385

(9.78)

375

BKAD SERIES

1.198 (30.43) MAX

.855 (21.72)

250 MAX

(6.35)

1 415 (35.94)

1 405 (35.69)

BKAE SERIES

11550 (39.37) MAX

(9.52)

Retainer Plate

Size 2 Plug

Panel Cutout

* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.

For further information, refer to ARINC 600 specification or consult factory.

Receptacle

1.810 (45.97)

1.790 (45.47)

BKAE SERIES

1.531 (38.89) MAX

1.431 (36.35)

1.421 (36.09)

BKAD/BKAF SERIES

1.221 (31.01)MAX

1.530

(38.86)

MIN

.655 (16.64)

.645 (16.38)

130 (3.30

.120 (3.05)

191 (4.85)

189 (4.80)

2 PL

.148 .003 (3.76 +_ 0.08) DIA.

10 PLCS MTG HOLES

260 (6.60)*

250 (6.35)

.070 (1.78)*

.050 (1.27)

240

(6.10)

MAX

030 R

(76)

MAX

2 PL

A

B

5.335 (136.02)

5.345 (135.76)

6.353

(161.37)

6.347

(161.21)

.180

(4.57)

.166

(4.22)

10 PL

D

6.870

(174.50)

MIN

1.429

(36.30)

1.423

(36.14)

3 PL

6.975 MAX

(177.16)

6.360 (161.54

6.340 (161.04

B

C

.135 (3.43)*

.115 (2.92)

.260

(6.60)

.230

(5.84)

2 PL

3.770 (95.76)

3.760 (95.50)

6.627 (168.33)

6.607 (167.82)

2.004 (50.90)

1.994 (50.65)

.120 R

(3.05)

MAX

2.133

(54.18)

2.127

2.780

(70.61)

MAX

1.258 (31.95)

1.248 (31.70)

4 PL

2.135 (54.23)

2.125 (53.98)

C

2.200

(54.03)

(55.88)

MIN

.287 R

(7.29)

MAX

8 PL

BKAD/BKAF SERIES

1.317 (33.45)

.653 (16.59)

.647 (16.43)

2 PLC

.168 (4.27)

.158 (4.01)

.240 MAX

(6.10)

.188 (4.78)

.184 (4.67)

.865 (21.97)

.855 (21.72)

BKAE SERIES

1.670 (42.42)

.365 (9.27)

.355 (9.02)

1.415 (35.94)

1.405 (35.69)

Retainer Plate

Size 2 Receptacle

Panel Cutout

*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.

For further information, refer to ARINC 600 specification or consult factory.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

8

ARINC 600

BKAD/E/F

Shell Dimensions- Size 3

Plug

3.275 (83.18)

3.245 (82.42)

BKAE SERIES

2.891 (73.43)

2.881 (73.18)

1.402 (35.61) MAX

1.150 MAX

(29.21)

1.955 (49.66)

1.945 (49.40)

3.310 MIN

(84.07)

.130 (3.50)

.120 (3.05)

.655 (16.64)

.645 (16.38)

BKAD SERIES

1.102 (27.99) MAX

.260 (6.60)*

.250 (6.35)

1.953

(49.61)

1.947

.148 +_ .003 DIA.

(3.76 +_ 0.08)

14 PLCS MTG HOLES

.030 (.76)R

MAX 4 PL

.070 (1.78)*

.060 (1.52)

(49.45)

5.355 (136.02)

5.345 (135.76)

.030 R MAX

(.76)

4 PL

6.355 (161.42)

6.345 (161.16)

6.353

(161.37)

6.347

.120 R MAX

(3.05)

4 PL

.135 (3.43)*

.115 (2.92)

6.500

(165.10)

MAX

(161.21)

6.645 (168.78)

6.629 (168.38)

6.515 MIN

(165.48)

6.995 MAX

(177.67)

.590 MAX

(14.99)

.385

2.004 (50.90)

1.994 (50.65)

(9.78)

.375

(.952)

620 MIN

(15.75)

2.135 (54.23)

2.125 (53.98)

1.258 (31.95)

1.248 (31.70)

.180

(4.57) D

.166

3.770 (95.76)

3.760 (95.50)

.250

(6.35)

MAX

.653

(16.59)

.647

(4.22)

12 PL

.191 (4.85)

.189 (4.80)

3 PL

1.68 (4.27)

.158 (4.01)

.188 (4.78)

.184 (4.67)

.2.889

(73.38)

2.883

.890 (22.61)

.870 (22.10)

BKAD SERIES

1.198 (30.43) MAX.

1.252 (31.80)

1.242 (31.55)

(73.23)

(16.43)

1.440 (36.58)

1.430 (36.32)

2.712 (68.88)

2.702 (68.63)

BKAE SERIES

1.550 (39.37) MAX

2.875 (73.02)

2.865 (72.77)

Retainer Plate

Size 3 Plug

Panel Cutout

* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.

For further information, refer to ARINC 600 specification or consult factory.

Receptacle

3.275 (83.18)

3.245 (82.42)

2.891 (73.43)

BKAE SERIES

2.881 (73.18)

1.531 (38.89) MAX

1.955 (49.66

1.945 (49.40)

BKAD/BKAF SERIES

1.221 (31.01)MAX

3.000 (76.20) MIN

.148 +_ .003 DIA.

(3.76 +_ 0.08)

14 PLCS MTG HOLES

.191 (4.85)

.189 (4.80)

3 PL

.130 (3.30)

.120 (3.05)

2.889 (73.38)

2.883 (73.23)

3 PL

.260 (6.60)*

.250 (6.35)

.287 R MAX

(7.29) 8 PL

.655 (16.64)

.645 (16.38)

.240 MAX

(6.10)

.070 (1.78)*

.060 (1.52)

5.355 (136.02)

5.345 (135.76)

.030 R MAX

(.76)

2 PL

.120 R MAX

(3.05)

6.870

(174.50)

MIN

6.355 (161.42)

6.345 (161.16)

.960

(24.38)

.930

4.PL

.135 (3.43)*

.115 (2.92)

6.627 (168.33)

6.607 (167.82)

(23.62)

2 PL

.180 (4.57)

.166 (4.22)

14 PL

D

6.975 MAX

(177.16)

2.004 (50.90)

1.994 (50.65)

2.780

(70.61)

MAX

2.135 (54.23)

2.125 (53.98)

2.20

(55.88)

MIN

1.258 (31.95)

1.248 (31.70)

2.133

(54.18)

2.127

3.770 (95.76)

3.760 (95.50)

(54.03)

.188 (4.78)

.184 (4.67)

BKAD/BKAF SERIES

1.317 (33.45)MAX

.365

(9.27)

.355

1.68 (4.27)

.158 (4.01)

.653

(16.59) 2 PL

.647

BKAE SERIES

1.670 (42.42 )MAX

.870 (22.10)

.850 (21.59)

1.953

(49.61) 2 PL

1.947

(49.45)

1.252 (31.80)

1.242 (31.55)

.240

(6.10)

MAX.

(9.02)

(16.43)

1.440 (36.58)

1.430 (36.32)

2.712 (68.88)

2.702 (68.63)

2.875 (73.02)

2.865 (72.77)

Retainer Plate

Size 3 Plug

Panel Cutout

* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.

For further information, refer to ARINC 600 specification or consult factory.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

9

ARINC 600

BKAD/E/F

Contact Arrangements - Shell Size 1

BKAD/BKAE (Plug Rear face shown)

BKAF - Available Receptacle Shell Only

(Front Release)

Shell Cavity

A or B

C

A or B

C

A

B

C

B

C

D

B

C

D

1

2

3

4

3

4

3

4

3

4

3

4

5

6

5

1

A

B

C

D

6

1

2

7

8

9

7

8

9

7

8

9

7

8

9

7

2

1T

2T

3

4

2

3

10

11

12

10

11

12

10

11

12

10

11

12

5

4

6

3

7

8

9

13

14

15

13

14

15

13

14

15

13

14

15

5

4

10

B

C

D

B

C

D

30T2

28 #22

60

60 #22

4

5W2

1 #12

40

40 #22

60

60 #22

5W2

1 #12

4 #12

2 #8 TWINAX/COAX

(#8 Grounded to

Shell)

2 #16

2 #5 COAX

2 #16

2 #5 COAX

ENGAGING END SURFACE WHITE ON RED TO INDICATE

FRONT RELEASE FRONT REMOVAL CONTACTS

REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE REAR REMOVAL CONTACTS

(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)

Contact Arrangements - Shell Sizes 2 and 3

BKAD/BKAE (Plug Rear face shown)

Shell Cavity

C or F

1

2

4

3

8

2

1

5

7

6

2

3

8

3

2

6

5

7

9

14

4

5

10

9

15

20

11

6

5

6

21

22

13

12

23

24

3

4

6**

6 #8

6T6**

6 #8 TRIAX

(Metallic Insert)

13W2

4 #20, 4 #12, 3 #16

2 #5 COAX

24T4**

20 #20, 4 #8 TRIAX

1

6

A

B

C

D

E

F

G

H

J

K

B

C

D

E

F

G

H

J

K

B

C

D

E

F

G

H

J

K

1

2

3

1

2

1

2

7

12

3

4

13

18

4

3

4

3

4

5

19

24

5

6

51

52

53

54

55

6

25

29

7

8

7

8

7

8

9

7

8

9

56

57

58

59

B

C

D

E

F

G

H

J

K

30

34

1

2

3

4

5

10

B

C

D

E

F

G

H

J

K

34**

59**

50 #22, 5 #16, 4 #12

85

100

100 #22

24 #20 HD, 10 #16

80 #22, 4 #20, 1 #16

**Pending ARINC release.

NOTE: In layouts using #22 contacts mixed with any other contact size (20HD, 16, 12), the size #22 contact type (pin or socket) determines the insulator as a pin insert or a socket insert.

REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE, REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS

(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

10

ARINC 600

BKAD/E/F

Contact Arrangements - Shell Sizes 2 and 3

BKAD/BKAE (Plug Rear face shown)

Shell Cavity

A,B,D,E

2W2

4W4

10T10**

24**

2 #1 COAX

4 Modified

#1 COAX

(Metallic Insert)

10 #8 TRIAX/COAX

(#8 Grounded to Shell)

(Metallic Insert)

24 #12

49T2**

47 #20

60**

60 #20

71W1

70 #22

71W1B

70 #22

2 #8 TRIAX

1 #1 COAX

110**

100 #22

5 #12 & 5 #20

150

150 #22

120T2 **

118 #22

2 #8 TWINAX/COAX

(#8 Grounded to Shell)

121**

110 #22

5 #16

6 #20

** Pending ARINC release.

REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE. REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS

(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

11

ARINC 600

BKAD/E/F

Contact Arrangements - Shell Sizes 2 and 3

BKAF - Available Receptacle Shell ONLY

(Front Release)

SHELL CAVITY

A, B, D, E,

71W1

70 #22

71W1B

70 #22

10T10**

10 #8

121F**

110 #22

6 #20

5 #16

150

150 #22

ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS

BKAF - Available Receptacle Shell ONLY

(Front Release)

SHELL CAVITY C, F

6T6**

6 #8 TRIAX

13W2

4 #20

100

100 #22

3 #16

4 #12

2 #5 COAX

** Pending ARINC release.

NOTE #22 CONTACTS ARE SOCKETS, 20HD,16, 12 ARE PIN CONTACTS.

ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE, FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS

(For Contacts Cavity Location and Contact Cavity Identification refer to ARINC 600 or Consult Factory)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

12

ARINC 600

BKAD/E/F

Waveguide Connections

WAVEGUIDE DETAIL

SHOWN FULLY ENGAGED

NO

ENGAGEMENT

1.255 (31.88)

- E -

- A -

1.370 (34.80)

1.310 (33.27)

.522 (13.26

.488 (12.40) ENGAGED

FULLY

CONN. PLUG

CONN.

RECEPTACLE

1.416 / 1.404

(35.97) / (35.61)

1.091 / 1.079

(27.71) / (27.41)

4 #8-32 UNC-2B

THRU HOLES

INSULATOR AND

WAVEGUIDE RETAINING

PLATE

2.810 (71.37)

2.690 (68.33)

Plug

Receptacle

Polarization (Engaging End)

BKA*1

BKA*2

BKA*3

CENTER

POST

CENTER

POST

CENTER

POST

CENTER

POST

CENTER

POST

CENTER

POST

RIGHT

POST

RIGHT

POST

RIGHT

POST

RIGHT

POST

RIGHT

POST

RIGHT

POST

LEFT

POST

LEFT

POST

LEFT

POST

LEFT

POST

LEFT

POST

LEFT

POST

PLUG

RECEPTACLE

PLUG

RECEPTACLE

PLUG

RECEPTACLE

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

13

ARINC 600

BKAD/E/F

Polarizing Positions

POST

KEY

Kit P/N 320-1067-003

Kit P/N 320-1067-000

Plug Shell

Receptacle Shell

Left

Center Right

Left

Center Right

Left

Center Right

Left

Center Right

Left

Center Right

Post

Position

01

02

03

04

05

1

2

3

4

5

1

4

5

6

1

2

01

02

03

04

05

4

3

2

1

6

4

5

2

76

77

78

79

80

3

1

6

151

152

153

154

155

1

2

3

4

5

6

76

77

78

79

80

1

6

5

4

3

151

152

153

154

155

5

6

4

3

2

1

6

06

07

08

09

10

6

1

2

3

4

1

6

3

4

5

6

1

06

07

08

09

10

4

5

4

5

4

3

2

1

5

6

2

81

82

83

84

85

3

6

5

156

157

158

159

160

6

1

2

3

4

5

6

5

81

82

83

84

85

2

1

6

5

4

156

157

158

159

160

5

6

5

4

3

2

1

11

12

13

14

15

5

6

1

2

3

1

6

5

2

3

4

5

6

11

12

13

14

15

5

6

4

6

5

4

3

2

6

2

86

87

88

89

90

3

5

161

162

163

164

165

5

6

1

2

3

5

4

86

87

88

89

90

3

2

1

6

5

161

162

163

164

165

6

1

6

5

4

3

2

16

17

18

19

20

4

5

6

1

2

1

5

4

1

2

3

4

5

16

17

18

19

20

6

1

4

1

6

5

4

3

1

2

91

92

93

94

95

3

4

166

167

168

169

170

4

5

6

1

2

5

4

3

91

92

93

94

95

4

3

2

1

6

166

167

168

169

170

1

2

6

1

6

5

4

3

21

22

23

24

25

3

4

5

6

1

4

3

6

1

2

3

4

21

22

23

24

25

1

2

4

2

1

6

5

4

1

2

96

97

98

99

100

3

4

3

171

172

173

174

175

3

4

5

6

1

5

3

2

96

97

98

99

100

5

4

3

2

1

171

172

173

174

175

2

3

6

2

1

6

5

4

26

27

28

29

30

2

3

4

5

6

1

3

5

6

1

2

3

26

27

28

29

30

2

4

3

2

1

6

5

2

3

2

101

102

103

104

105

3

2

176

177

178

179

180

2

3

4

5

6

5

2

101

102

103

104

105

6

5

4

3

2

176

177

178

179

180

3

6

3

2

1

6

5

31

32

33

34

35

1

2

3

4

5

1

2

4

5

6

1

2

31

32

33

34

35

3

4

3

2

1

6

3

4

2

1

106

107

108

109

110

3

4

2

1

181

182

183

184

185

1

2

3

4

5

6

1

106

107

108

109

110

1

6

5

4

3

181

182

183

184

185

4

5

4

3

2

1

6

36

37

38

39

40

6

1

2

3

4

1

2

1

3

4

5

6

1

36

37

38

39

40

3

4

3

5

4

3

2

1

4

5

1

111

112

113

114

115

4

1

6

186

187

188

189

190

6

1

2

3

4

6

1

6

111

112

113

114

115

2

1

6

5

4

186

187

188

189

190

4

5

4

3

2

1

41

42

43

44

45

5

6

1

2

3

2

1

6

2

3

4

5

6

41

42

43

44

45

4

5

3

6

5

4

3

2

5

1

116

117

118

119

120

4

6

191

192

193

194

195

5

6

1

2

3

6

5

116

117

118

119

120

3

2

1

6

5

191

192

193

194

195

5

6

5

6

5

4

3

2

46

47

48

49

50

4

5

6

1

2

6

5

1

2

3

4

5

46

47

48

49

50

5

6

3

1

6

5

4

3

6

1

121

122

123

124

125

4

5

196

197

198

199

200

4

5

6

1

2

6

5

4

121

122

123

124

125

4

3

2

1

6

196

197

198

199

200

6

1

5

1

6

5

4

3

51

52

53

54

55

3

4

5

6

1

2

5

4

6

1

2

3

4

51

52

53

54

55

6

1

3

2

1

6

5

4

6

1

126

127

128

129

130

4

5

4

201

202

203

204

205

3

4

5

6

1

6

4

3

126

127

128

129

130

5

4

3

2

1

201

202

203

204

205

1

2

5

2

1

6

5

4

56

57

58

59

60

2

3

4

5

6

2

4

5

6

1

2

3

56

57

58

59

60

1

3

2

1

6

5

1

2

1

131

132

133

134

135

4

3

206

207

208

209

210

2

3

4

5

6

3

131

132

133

134

135

6

5

4

3

2

206

207

208

209

210

2

5

3

2

1

6

5

61

62

63

64

65

1

2

3

4

5

2

3

4

5

6

1

2

61

62

63

64

65

2

3

4

3

2

1

6

2

3

1

136

137

138

139

140

4

3

2

211

212

213

214

215

1

2

3

4

5

6

2

136

137

138

139

140

1

6

5

4

3

211

212

213

214

215

3

5

4

3

2

1

6

66

67

68

69

70

6

1

2

3

4

2

3

2

3

4

5

6

1

66

67

68

69

70

2

3

5

4

3

2

1

3

4

1

6

141

142

143

144

145

4

5

2

1

216

6

2

141

142

143

144

145

2

1

6

5

4

216

3

5

71

72

73

74

75

5

6

1

2

3

2

3

2

1

2

3

4

5

6

71

72

73

74

75

3

4

3

2

6

5

4

3

2

4

6

146

147

148

149

150

5

1

146

147

148

149

150

3

2

1

6

5

1

2

3

4

5

6

Dark area represents post

Dimensions shown in inch (mm)

www.ittcannon.com

14

ARINC 600

BKAD/E/F

Contact and Termination Tooling Data

BKA* (LIF) Crimp Contacts

Contact Size and Part Numbers

Part Numbers

Crimp Tooling

Insertion/Extraction Tooling

Wire Size

Tool P/N

Locator P/N

ITT

Cannon

ITT Cannon

Se-

lec-

tor#

Insul

AWG

Strip

Length

MIL

Spec.

MIL

Spec.

ITT

Dia. Max

Insertion

Extraction

Ins./Ext.

Mil Spec.

Size

Socket

Cannon

Used in Plug

030-2259-000

Used in Recep. M22520 995-0001-

3

4

M22520 995-0002-

/2-23 015

M81969 CIT-DPXMA-22-1 CET-DPXMA-22 980-0004-804

26

24

22

.054

(1.4)

.130/.110

(3.3)/(2.8)

2222

031-1287-000

/2-01

584

/1-01

Metal

Metal Tip

070256-0000

070317-0000

Used in Recep

030-2273-000

Used in Plug

031-1302-000

M22520 995-0001-

/2-01 584

6

7

M22520 995-0001-

/2-08 604

M81969

/1-02

-

980-0004-805

Metal Tip

22

20

.071

(1.8)

.167/.147

(4.2)/(3.7)

2020HD

1616

Used in Recep

030-2280-000

Used in Plug

031-1303-000

M22520 995-0001-

/1-01 585

4

5

6

M22520 995-0001-

/1-02 736

M81969

/1-03

-

CET 16-9

Plastic

980-0004-806

Metal Tip

20

18

16

.103

(2.6)

.207/.230

(6.9)/(5.8)

Used in Recep

030-2286-000

Used in Plug

031-1308-000

M22520 995-0001-

7

8

M22520 995-0002-

M81969

/14-04

-

CET 12-4

Plastic

CIET-12

Plastic

14

12

.135

(3.4)

.270/.230

(6.9)/(5.8)

1212

/1-01

585

/1-11

027

BKA* Thermocouple Contacts

Contact Size and Part Numbers

Part Number

Crimp Tooling

Insertion/Extraction Tooling

Wire Size

Tool P/N

Locator P/N

ITT

ITT Cannon

Se-

Insul

Dia. Max

Strip

Length

MIL

Spec.

AWG

lec-

tor#

MIL

ITT

Insertion

Extraction

Ins./Ext.

Mil Spec.

Size

Socket

Spec.

Cannon

2222

Alumel

Used in Plug

030-1975-009

Used in Recep.

031-1113-009

3

4

CIT-DPXMA-22-1 CET-DPXMA-22 980-0004-804

26

24

22

.054

(1.4)

.130/.110

(3.3)/(2.8)

M22520 995-0001

/2-01 584

M22520 995-0002-

/2-23 015

M81969

/1-01

Metal

Metal Tip

Used in Plug

030-1975-010

Used in Recep.

031-1113-010

2222

Chromel

070256-0000

070317-0000

BKAF-ARINC 600 Size 22 Wrap Post Socket Contacts With .025(6.35) Square Wire-Wrappable Tails-Receptacle Only.

Number

of Wraps

Min. Post

Extension

The new low insertion force, front-insertable, front-removable #22 socket

Contact Mod.

WA

Part Number

Extraction Tool

contacts with .025(6.35) square wire wrappable tails are now available for use

in the BKAF non-enviornmental receptacle version only.

031-1351-000

1

.250 (6.35)

WB

WC

WD

031-1351-001

031-1351-002

031-1351-003

2

3

.375 (9.52)

.500 (12.70)

.641 (16.28)

These contacts can be sold separately or they can be supplied with a connector

(see How to Order). Use part numbers shown in the table on the right when

ordering separately.

CET-22F

317-1798-001

BKAF Printed Circuit Solder Post Socket Contacts Size 22 with .025(6.35) Dia. Printed Circuit Tails-Receptacle Only.

The new low insertion force, front-insertable, front-removable #22 socket

contacts with .025(6.35) dia., PC tails are now availble for use in the BKAF

non-environmental receptacle version only.

Contact Mod.

SA

Part Number

Min. Post Extension

.150 (3.81)

Extraction Tool

CET-BKAF 22S

031-1352-000

SB

SC

SD

.250 (6.35)

.375 (9.52)

.500 (12.70)

031-1352-001

031-1351-002

031-1352-003

These contacts can be sold separately or they can be supplied with a connector

(see How to Order). Use part numbers shown in the table on the right when

ordering separately.

Contact Size

Part Number

Post Dia.

BKAD/F Solder Post, Power Pin Contacts (Captive)-Receptacle Only.

Min. Post Extenstion*

.150 (3.81)

2D HD

030-2358-000

.032 (0.81)

Contacts are captivated between two unbonded insulator halves.

16

12

030-2357-000

.050 (1.27)

.081 (2.06)

.150 (3.81)

030-2356-000

*Consult facotry for other available lengths

Min. Post

Extension

BKAF Solder Post Pin Contact Front Release

Contact Size

Part Number

Post Dia.

Extraction Tool

317-1798-000

20HD

030-3287-000

.030 (0.76)

.300* (7.62)

16HD

12HD

030-3287-001

030-3287-002

.050 (1.27)

.081 (2.06)

.300* (7.62)

317-1798-002

*Applies to BKAF 13W2 and 5W2 inserts only

Contact Size

Part Number

PC Tail Dia.

Min. Post Extension

Front Release Pin Contacts Size 20 and 16

20

030-3296-001

.034 (0.86)/.030 (0.76)

.260 (6.60)

20

16

030-3296-002

030-3297-001

030-3297-002

.034 (0.86)/.030 (0.76)

.052 (1.32)/.048 (1.22)

.385 (9.78)

.260 (6.60)

.385 (9.78)

16

030-3297-005

030-3296-004

.052 (1.32)/.048 (1.22)

.034 (0.86)/.030 (0.76)

.300 (7.62)

20

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

15

ARINC 600

BKAD/E/F

Size 5 Coax Contact (Rear insertable/removable)

Crimp Center Contact-Conforming to ARINC 600

Crimp Tooling

Center Contact

Outer Shell

MIL STD

Part Number

Tool

Locator

ITT Cannon

Cable

Accommo-

dation

(Receptacle

Socket

(Plug

Complete

Tool

Extraction

Connector) Connector)

Tool

MIL Spec ITT Cannnon

Daniels

K-345

ITT Cannon

Frame

Jaw

RG-58C/U

BA-5903

(BG)

349-0014-000

349-0013-000

M22520/2-01

995-0001-584

995-0002-049

M22520/5-01

M22520/5-45B

CCT-HX3-156

CET-C8

5021K1011

(Raychem)

349-0016-000

349-1060-000

349-0015-000

349-1059-000

M22520/2-01

M22250/2-01

995-0001-584

K-345

995-0002-049

M22520/5-01

M22520/5-45B

CCT-HX3-156

CET-C8

RG-223

RG-400

RD-316

-

349-1003-000

349-1004-000

M22250/2-01

995-0001-584

K-345

995-0002-049

M22520/10-01 M22520/10-23

-

CET-C8

Size 12 Shielded Contact (Rear insertable/removable)

Crimp Tooling

Locator P/N

Center Contact

Part Number

Tool P/N

Outer Shell Tool

MIL Std

Tool

Cable

Accommo-

dation

Socket

(Plug

Connector)

(Receptacle

Connector)

ITT

Cannon

ITT

Cannon

ITT

Cannon

ITT

Cannon

MIL Spec

Frame

Jaw

Daniels

K-182

CET-12-4

Plastic

RG-196A/U

249-1767-000

249-1767-001

-

M22520/2-01

995-0001-584

995-0002-051

M22520/1-01 M22520/10-05A 995-0001-071

M81969/28-02

CET-12-4

5071

M22520/2-01

K-182

M22520/1-01 M22520/10-05A 995-0001-071

M81969/28-02

Plastic

(HW)

CET-12-4

Plastic

RG-174/U

-

249-1768-000

M22520/2-01

995-0001-584

K-182

K-644

995-0002-051

995-0002-050

M22520/1-01 M22520/10-05A 995-0001-071

M81969/28-02

BMS-1348

(BG)

CET-12-4

Plastic

-

249-2203-000

-

RG-316

249-1767-005

Size 1 Modified Coaxial Contacts (4W4 Layout Only)

Plug Connector

Replacement Termination Kits

Coax

Cable Accommodation

RG214

Part Number

349-1043-001

349-1048-000

349-1051-000

349-1046-000

349-1049-000

349-1050-000

349-1047-000

349-1047-001

Style

Solder Type

CrimpType

Straight

320-1066-000

320-1066-002

320-1066-003

320-1066-001

320-1066-004

320-1066-005

320-1066-016

320-1066-018

320-1066-019

320-1066-017

320-1066-013

320-1066-014

AA-5886

RG393

Straight

ECS 311201

AA-5887

Straight

AA-5888

Straight

RG142

Straight

320-1066-006

-

320-1066-015

-

Various

TNC Adapter

Customer Use Drawings:

All Coax contacts (except 349-1047-001) customer use drawing #349-0000-305

Crimp termination kits: Customer use drawing #320-0000-305

Solder termination kits: Customer use drawing #320-0000-304

Receptacle Connector

Coax

Replacement Termination Kits

Cable Accommodation

RG316 DS

Part Number

349-1051-002

349-1044-000

349-1042-000

Style

Straight

Solder Type

320-1066-008

320-1066-007

-

CrimpType

N/A

-

RG142

Straight

Various

SMA Adapter

Customer Use Drawings:

Coax contacts 349-1051-002 and 349-1044-000 are located on cusomter use drawing #349-0000-304

Coax contacts 349-1042-000 is located on cusomter use drawing #320-1042-000

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

16

ARINC 600

BKAD/E/F

Sizes 1 Coax Contacts (71W1 layout only)

Same standard coax contacts as used in ITT’s DPX (ARINC 404) connector series.

Receptacle Connector

Replacement Coax

Termination Kit

Replacement Coax

Body Assembly

Cable

Accommodation

Coax

Part Number

Style

249-1521-000

249-1521-002

RG-9/U

RG-214/U

021-0144-000

NSA 935354

NSA 935355

249-2201-000

-

RG-55/U

RG-58/U

RG-142/U

RG-400/U

021-0144-003

021-0144-006

249-1554-002

249-1604-003

Straight

90˚

249-1554-000

249-1604-001

RG-58/U

RG-142/U

RG-225/U

RG-402/U

UT-141

249-1604-002

249-5027-008

249-5027-017

RG-402/U

UT-141

021-0144-001

249-5027-016

Straight

SMA Jack

Termination

-

Plug Connector

Replacement Coax

Termination Kit

Replacement Coax

Body Assembly

Cable

Accommodation

Coax

Part Number

Style

RG-9/U

249-1522-000

249-1522-010

249-2202-000

NSA 935354

NSA 935355

-

021-0144-004

Straight

RG-58/U

RG-142/U

249-1882-001

249-1882-000

021-0144-011

021-0144-008

Straight

320-0051-000

249-5027-013

249-5027-015

249-1885-002

249-5123-000

249-5123-001

RG-402/U

RG-214/U

RG-115/U

Sizes 1 Coax Contacts (To be used with connectors containing 71W1A, 71W1B and 2W2 insert modifier-"M")

Designed to be interchangeable with contacts made by other manufacturers.

Receptacle Connector

Plug Connector

Cable

Accommodation

Cable

Accommodation

Standard Size 1

Part Number

Modular Size 1

Part Number

Termination Kit for

Modular Size 1 Coax

Style

Part Number

Style

Right Angle

349-0017-000

349-1053-003

320-1066-000

349-0021-000

RG-142B/U

RG-214/U

RG-393/U

-

Straight

RG-402/U

UT-141

Right Angle

Straight

349-0022-000

349-0017-000

349-1053-007

320-1066-003

BA-6903

SMA Jack

Termination

5012H3012

(Raychem)

349-0023-000

349-0002-000

Straight

349-0018-000

-

RG-214/U

RG-393/U

BA-6903

(BG)

349-0005-000

349-0007-000

RG-142B/U

349-1053-006

320-1066-006

Straight

RG-402/U

UT-141

-

Straight

349-1053-008

320-1066-005

AA-5888

-

5012H3012

(Raychem)

349-0004-000

349-0006-000

349-0008-000

Straight

349-1053-005

349-1053-004

-

ECS-310801

AA-5886

320-1066-002

RG-142B/U

RG-402/U

UT-141

349-1053-003

349-1053-002

349-1053-001

-

BSX-7004-502

ECS-311201

-

320-1066-001

320-1066-004

AA-5887

Adam Russell

PC-38

Straight

349-1053-000

-

TNC

349-1052-003

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

17

ARINC 600

BKAD/E/F

Size 8 Coaxial Contacts

Plug Connector

**Termination

Solder

Contact Type

Socket

Part Number

*Engagement

Crimp

RR-RR

Crimp

FR-RR

FR-FR

.375 (9.52)

RF Cable

Number

.250 (6.35)

Short

Long

Adams-Russell Co. Inc.

FC11Z

349-1087-003

-

X

Adams-Russell Co. Inc.

FC14Z

349-1087-004

-

Receptacle Connector

**Termination

Contact Type

Socket

Part Number

*Engagement

Crimp

RR-RR

Crimp

FR-RR

FR-FR

.250 (6.35)

Solder

RF Cable

.375 (9.52)

Number

Short

Long

-

X

-

X

349-1084-000

349-1084-001

349-1084-002

X

-

X

-

349-1084-003

349-1086-000

X

Adams-Russell Co. Inc.

FC11Z

-

X

Adams-Russell Co. Inc.

FC14Z

349-1086-001

Size 8 Twinax Contacts

Plug Connector

**Termination

Contact Type

Socket

Part Number

*Engagement

Crimp

RR-RR

Crimp

FR-RR

Solder

.250 (6.35)

FR-FR

RF Cable

.375 (9.52)

Number

Short

Long

M17/176-00002

349-1006-000

-

X

Tensolite Co.

24463/9 B017X-2 (LD)

349-1081-001

-

Receptacle Connector

**Termination

Contact Type

Socket

Part Number

*Engagement

Crimp

RR-RR

Crimp

FR-RR

Solder

.250 (6.35)

FR-FR

RF Cable

.375 (9.52)

Number

Short

Long

M17/176-00002

349-1007-000

349-1080-000

349-1080-001

349-1080-002

349-1080-003

-

X

-

X

-

X

-

X

Tensolite Co.

24463/9 B017X-2 (LD)

349-1082-000

349-1082-001

349-1088-001

X

-

X

Tensolite Co.

24463/9 B017X-2 (LD)

X

Tensolite Co.

24463/9 B017X-2 (LD)

-

X

Size 8 Ground Contacts

Plug Connector

**Termination

Contact Type

Socket

Part Number

*Engagement

Crimp

RR-RR

Crimp

FR-RR

Solder

.250 (6.35)

FR-FR

.375 (9.52)

Wire

Size

Short

Long

031-3300-000

-

X

8, 10 AWG

Receptacle Connector

**Termination

Contact Type

Socket

Part Number

*Engagement

Crimp

RR-RR

Crimp

FR-RR

Solder

FR-FR

.375 (9.52)

Wire

Size

.250 (6.35)

Short

Long

030-3306-000

030-3306-001

030-3676-000

-

X

-

X

8, 10 AWG

X

* The electrical engagement of "Long" contacts is .150 (3.81) greater than the electrical engagement of "Short" contact.

**RR-RR indicates rear release, rear removal.

FR-RR indicates front release, rear removal.

FR-FR indicates front release, front removal.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

18

ARINC 600

BKAD/E/F

Sealing Plugs-BKAE Environmental Connectors Only

P/N 225-0090-000

Material: Teflon

(All others thermoplastic)

Part

Number

Contact

Size

Color

A

B

C

22

Black

.063 (1.6)

.040 (1.0)

.469 (11.9)

225-1013-000

225-0070-000

225-0071-000

20

16

12

Red

Blue

.085 (2.2)

.115 (2.9)

.171 (4.3)

.065 (1.6)

.075 (1.9)

.121 (3.1)

.469 (11.9)

.564 (14.3)

Yellow

225-0072-000

225-0090-000

White

.365 (9.3)

.287 (7.3)

.835 (21.2)

#5 and #9 Coax

B

A

C

Filler Plugs-BKAD Non-Environmental Connectors Only

P/N 225-0099-000

Material: Teflon

(All others thermoplastic)

Part

Number

Contact

Size

Color

A

B

C

225-0094-000

22

Black

.069 (1.7)

.051 (1.3)

.420 (10.7)

225-0095-000

225-0096-000

225-0097-000

20

16

12

Red

Blue

.083 (2.1)

.131 (3.3)

.187 (4.7)

.069 (1.7)

.108 (2.7)

.156 (4.0)

.350 (8.9)

.320 (8.1)

Yellow

B

A

B

A

#5 Coax

(Pin)

White

.275 (7.0)

.251 (6.4)

.450 (11.4)

225-0098-000

225-0099-000

C

#5 and #9 Coax

(Socket)

C

1.061 (26.9)

BKAF P/N 225-1058-000

(Size 22 - Black)

(See Customer Use Drawing for details)

Cavity Reducer

#5 Coax to #12 Contact

Cavity reducers are available when additional circuits are required for siz 12 power contacts. These

reducers, having the internal configuration of size 12 power contact, are inserted into the size 5 coaxial

insulator cavity to create size 12 power contact cavity.

Socket

P/N 021-8756-000

P/N 021-8757-000

(Non removable)

Dust Caps

Part Number

Description

Part Number

Description

Conductive dust caps protect against

static electricity.

025-1121-001

025-1122-001

025-1123-001

025-1124-001

BKAD 1-A & B-Plug

BKAD 1-C-Plug

025-1155-001

025-1156-001

025-1157-001

025-1158-001

BKAD 1-A&B-Receptacle

BKAD 1-C-Receptacle

BKAD 2&3-A & B-Plug

BKAD 2&3-C-Plug

BKAD 2&3-A & B-Receptacle

BKAD 2&3-C-Receptacle

Note: Supplied as standard for BKA product line only.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

19

ARINC 600

BKAD/E/F

Replaceable Inserts

Part Number

Layout

Class

Pin Assembly

Socket Assembly

BKAD

BKAE

BKAD

BKAE

BKAD

BKAE

BKAF

BKAE

BKAD

BKAE

BKAF

BKAD

BKAE

BKAD

BKAE

BKAF

BKAD

BKAE

BKAD

BKAE

BKAD

BKAE

BKAF

BKAD

BKAE

BKAF

BKAD

BKAE

BKAF

BKAD

BKAE

BKAF

BKAD

BKAE

BKAF

BKAD

BKAE

BKAF

BKAE

BKAD

BKAE

BKAF

BKAD

BKAE

BKAD

BKAE

BKAF

144-2944-000

143-1156-001

177-1000-002

143-1912-000

143-1912-001

143-1141-000

143-1154-001

228-1026-002

228-1026-001

N/A

144-2945-000

143-1157-001

177-1001-004

143-1913-000

143-1913-001

N/A

2W2**

A

4W4**

5W2

6

143-1155-001

228-1012-003

228-1012-001

228-1015-001

N/A

6T6

228-1027-002

228-1027-001

143-1908-000

143-1908-001

143-1142-000

143-1173-000

143-1173-001

143-1159-001

143-1097-005

143-1171-001

143-1167-001

143-3714-003

143-1910-000

143-1910-001

N/A

10T10

13W2

228-1014-002

143-1909-000

143-1909-001

N/A

143-1174-000

143-1174-001

N/A

30T2

34

143-1098-005

143-1172-001

143-1170-001

143-3715-003

143-1911-000

143-1911-001

143-2065-000

143-1960-000

143-1960-002

143-2090-000

143-2086-001

143-2086-000

143-2066-000

143-1111-000

143-1112-000

143-1118-000

143-3878-000

143-3880-000

143-1178-000

143-2016-000

143-2016-001

143-2067-000

143-1183-000

143-1166-002

143-1166-001

143-1177-000

143-1158-002

143-1158-001

143-1907-000

143-1907-001

143-2068-000

40

59*

60-#20**

60-#22**

143-1958-000

143-1958-002

N/A

71W1

143-2085-001

143-2085-000

N/A

71W1A*

71W1B

85

143-1113-000

143-114-000

N/A

143-3877-000

143-3879-000

N/A

143-2015-000

143-2015-001

N/A

100

110

143-1182-000

N/A

143-1165-003

N/A

120T2

143-1150-002

143-1150-001

143-1906-000

143-1906-001

N/A

121

150

Consult factory for Insert Part Numbers not listed.

*Modified 71W1 insert to be used with connectors containing 71W1 insert modifier "M"

**"Pin Inserts' accept receptacle coax contacts. "Socket Inserts" accept plug coax contacts.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

20

ARINC 600

BKAD/E/F

Cross Reference-Part Number/Customer-Use Drawing

COMPONENT

CUSTOMER USE

COMPONENT

CUSTOMER USE

COMPONENT

CUSTOMER USE

PART NUMBER

DRAWING NUMBER

PART NUMBER

DRAWING NUMBER

PART NUMBER

DRAWING NUMBER

143-1908-000

143-1908-001

143-1909-000

143-1909-001

143-1910-000

143-1910-001

143-1911-000

143-1911-001

143-1912-000

143-1912-001

143-1913-000

143-1913-001

143-1958-000

143-1958-002

143-1960-000

143-1960-002

143-2015-000

143-2015-001

143-2016-000

143-2016-001

143-2065-000

143-2066-000

143-2067-000

143-2068-000

143-2085-000

143-2085-001

143-2086-000

143-2086-001

Replacement Coax Termination Kit

249-1521-002

249-1522-009

249-1522-010

249-1554-002

249-1604-003

249-1604-004

249-2201-000

249-2202-000

249-5027-013

249-5027-015

249-5027-016

320-0051-000

320-1066-000

320-1066-001

320-1066-002

320-1066-003

320-1066-004

320-1066-005

320-1066-006

Contacts

143-0000-081

143-0000-077

249-1521-002

249-1522-010

249-1554-002

249-1604-003

249-1604-004

249-1521-002

249-1522-010

249-5027-013

249-5027-007

249-5027-016

1250Y

030-1975-009

030-1975-010

030-2259-000

030-2273-000

030-2280-000

030-2286-000

030-2356-000

030-2357-000

030-2358-000

031-1113-009

031-1113-010

031-1287-000

031-1302-000

031-1303-000

031-1308-000

031-1351-000

031-1351-001

031-1351-002

031-1351-003

031-1352-000

031-1252-000

031-1252-002

031-1352-003

030-1975-009

030-1975-010

030-2259-000

030-2273-000

030-2280-000

030-2286-000

030-2356-000

030-2357-000

030-2358-000

031-1113-009

031-1113-010

031-1287-000

031-1302-000

031-1303-000

031-1308-000

143-0000-080

143-0000-079

143-0000-078

1247Y

320-000-305

031-0000-343

Dust Caps

031-0000-344

025-1121-001

025-1122-001

025-1123-001

025-1124-001

025-1155-001

025-1156-001

025-1157-001

025-1158-001

025-0000-054

(Conductive Only)

143-0000-079

Replacement Coax

Body Assembly

021-0144-000

021-0144-001

021-0144-002

021-0144-003

021-0144-004

021-0144-006

021-0144-008

021-0144-011

021-0144-000

021-0144-001

021-0144-002

021-0144-003

021-0144-004

021-0144-006

021-0144-008

021-0144-011

025-0000-055

(Conductive Only)

Size #1 Coax Contacts

249-1521-000

249-1522-000

249-1522-002

249-1554-000

249-1604-000

249-1604-001

249-1604-002

249-1882-000

1250Y

249-1521-000

249-1522-000

249-1522-002

249-1554-000

249-1604-000

249-1604-001

249-1604-002

249-1882-000

249-1882-002

249-1885-002

249-5027-008

249-5027-017

249-5123-000

249-5123-001

349-1053-000

349-1053-001

349-1053-002

349-1053-003

349-1053-004

3491053-005

349-1053-006

349-1053-007

349-1053-008

349-1053-009

Filler Plugs

225-0094-000

225-0095-000

225-0096-000

225-0097-000

225-0098-000

225-0099-000

225-1058-000

225-0000-014

Size #5 Coax Contacts

349-0013-000

349-0000-000

349-0000-001

349-0000-002

349-0000-001

349-0014-000

349-0015-000

Sealing Plugs

249-5027-008

249-5027-017

249-5027-000

249-5027-007

349-0016-000

225-0072-000

225-0000-006

225-0090-000

349-1003-000

225-0090-000

225-1013-000

225-1014-000

225-1015-000

349-000-301

349-1009-000

225-0000-008

Size #12 Shielded Contact

249-1767-000

249-1767-001

249-1768-000

249-2203-000

249-1767-001

249-1768-000

249-2203-000

349-0000-306

Replaceable Inserts

143-1906-000

143-0000-079

143-1906-001

143-1907-001

For part numbers not listed, consult ITT for applicable customer-use drawing.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

21

ARINC 600

BKAD/E/F

ARINC 600 Connector Engaging Sequence

PLUG

RECEPTACLE

Mating

Sequence

Flange

Position With:

Flange Spacing

in. (mm)

1.245 (31.62)

Nom.

No Engagement

1

2

1.110 (28.19)

1.073 (27.25)

Shells Initially

Engaged

1.073 (27.25)

1.023 (25.88)

Polarizing Pins

Entering Keys

3

#22

Contacts Entering

Mating Insulator

.800 (22.32)

.748 (18.99)

#22

#20

.805 (20.44)

.741 (18.82)

#22

4

1.012 (25.70)

.949 (24.10)

2

#16

#12

1.008 (23.60)

.953 (24.20)

1

Miniature Coax

#12

Contacts Electrically

Engaged

#16

#20

.642 (16.30)

.547 (13.89)

MIN

COAX

#22

#20

.649 (16.48)

.553 (14.04)

5

.728 (18.49)

.818 (20.77)

(SHELLS FULLY MATED)

(NO ENGAGEMENT)

7

#16

1

A

E

.772 (19.60)

.692 (17.57)

NOTES:

(RACK SIDE)

(BOX SIDE)

#12

1

1. Varies; See Mil-Spec. (#5 Coax)

2. Size 1 only.

Miniature Coax

1

2

.618 (15.70)

.578 (14.68)

"0" Ring Engagement

6

7

3. Flush head screws are not permitted for connector mounting

as they would position connector incorrectly.

(BKAE Only)

.522 (13.26)

.488 (12.40)

Shells Fully

Mated

4. Dimension 7 was calculated to provide clearance for

- MCU backplate mat'l thickness of 2.5 mm (.10 in).

- Rack backplate mat'l thickness of 2.5 mm (.10 in).

- Connector mounting pan head screws, MCU 2.0 mm (.08 in).

- Tolerance allowance - 3.2 mm (.13 in.) rack 2.0 mm (.08 in.)

Total - 12.2 (.50 in) (minimum).

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

22