转到网站首页
转为中文步骤：
1、请用电脑端360浏览器打开本页地址，如您电脑未安装360浏览器，请点这里下载;
2、点击360浏览器右上角的翻译插件，如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可；
SAW Bandpass Filter F1G8A  
Features  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
PCS applications  
Usable bandwidth 58.9 MHz  
No impedance matching require for operation at 50 ꢁ  
SMD Package 1.4 mm × 1.0 mm× 0.5 mm  
Singleꢀended Operation  
Package Dimensions  
4
5
1
2
3
Side View  
Bottom View  
Top View  
Pin Configuration  
1
4
Input  
Output  
Ground  
2, 3, 5  
Maximum Ratings  
Parameter  
Unit  
°C  
Minimum  
Typical  
Maximum  
Operating Temperature Range  
Storage Temperature Range  
Power Handling Capability  
Electrostatics Sensitive Device (ESD)  
ꢀ30  
25  
ꢀ
85  
ꢀ
°C  
ꢀ
ꢀ
dBm  
ꢀ
ꢀ
Part No.  
Rev. Date  
Rev.  
NCLL01ꢀF1G8A  
2010ꢀ12ꢀ17  
I T F Co., Ltd.  
102ꢀ901, Bucheon Technopark 364,  
SamjeongꢀDong, OjeongꢀGu, BucheonꢀCity,  
GyounggiꢀDo, Korea 421ꢀ809  
PS01  
1/7  
SAW Bandpass Filter F1G8A  
Specifications  
Fc =1880.0MHz  
Terminating source impedance  
Terminating load impedance  
:
single 50Ω  
: single 50Ω  
Minimum  
Typical  
1880.0  
2.4  
Maximum  
Center Frequency  
Insertion Loss (1850.6~1909.4 MHz)  
MHz  
dB  
ꢀ
ꢀ
ꢀ
ꢀ
4.8  
2.7  
Amplitude Ripple (1850.6~1909.4 MHz)  
dB pꢀp  
1.3  
Relative Attenuation  
D.C. ~ 1570 MHz  
1570 ~ 1580 MHz  
1580 ~ 1770 MHz  
1770 ~ 1829.4 MHz  
1930.6 ~ 1989.4 MHz  
1989.4 ~ 3000 MHz  
40.0  
35.0  
30.0  
20.0  
17.0  
12.0  
48.0  
46.0  
54.0  
39.0  
39.0  
22.0  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
dB  
VSWR (1850.6~1909.4 MHz)  
ꢀ
ꢀ
2.0  
2.5  
Notes :  
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and  
full 2 port calibration.  
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing  
tolerances  
Part No.  
Rev. Date  
Rev.  
NCLL01ꢀF1G8A  
2010ꢀ12ꢀ17  
I T F Co., Ltd.  
102ꢀ901, Bucheon Technopark 364,  
SamjeongꢀDong, OjeongꢀGu, BucheonꢀCity,  
GyounggiꢀDo, Korea 421ꢀ809  
PS01  
2/7  
SAW Bandpass Filter F1G8A  
Matching Schematic  
( Actual matching values may vary due to PCB layout and parasitics )  
Input  
50Ω  
Output  
50Ω  
Marking Configuration  
Part No.  
Rev. Date  
Rev.  
NCLL01ꢀF1G8A  
2010ꢀ12ꢀ17  
I T F Co., Ltd.  
102ꢀ901, Bucheon Technopark 364,  
SamjeongꢀDong, OjeongꢀGu, BucheonꢀCity,  
GyounggiꢀDo, Korea 421ꢀ809  
PS01  
3/7  
SAW Bandpass Filter F1G8A  
Typical Performance  
Part No.  
Rev. Date  
Rev.  
NCLL01ꢀF1G8A  
2010ꢀ12ꢀ17  
I T F Co., Ltd.  
102ꢀ901, Bucheon Technopark 364,  
SamjeongꢀDong, OjeongꢀGu, BucheonꢀCity,  
GyounggiꢀDo, Korea 421ꢀ809  
PS01  
4/7  
SAW Bandpass Filter F1G8A  
S11, S22 VSWR  
S11, S22 Smith Chart  
Part No.  
Rev. Date  
Rev.  
NCLL01ꢀF1G8A  
2010ꢀ12ꢀ17  
I T F Co., Ltd.  
102ꢀ901, Bucheon Technopark 364,  
SamjeongꢀDong, OjeongꢀGu, BucheonꢀCity,  
GyounggiꢀDo, Korea 421ꢀ809  
PS01  
5/7  
SAW Bandpass Filter F1G8A  
S21 Wide Band  
Part No.  
Rev. Date  
Rev.  
NCLL01ꢀF1G8A  
2010ꢀ12ꢀ17  
I T F Co., Ltd.  
102ꢀ901, Bucheon Technopark 364,  
SamjeongꢀDong, OjeongꢀGu, BucheonꢀCity,  
GyounggiꢀDo, Korea 421ꢀ809  
PS01  
6/7  
SAW Bandpass Filter F1G8A  
Packing Specification  
1. Reeling Quantity : 3,000 pcs / reel (or 15,000 pcs / reel)  
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.  
TOP COVER TAPE  
REEL  
CARRIER TAPE  
Tape Specification  
1. Leader part and vacant position specification  
Vacant  
150mm min.  
Component  
contained  
Vacant  
150mm min.  
Leader part  
250mm min.  
END  
START  
Tape Running Direction  
2. Tensile strength of carrier tape  
4.4N/mm width  
Direction of pull  
Top cover tape  
3. Top cover tape adhesion  
1) pull off angle : 0~15°  
2) speed : 300mm/min  
3) force : 20~70g  
0~15 degree  
Carrier tape  
Part No.  
Rev. Date  
Rev.  
NCLL01ꢀF1G8A  
2010ꢀ12ꢀ17  
I T F Co., Ltd.  
102ꢀ901, Bucheon Technopark 364,  
SamjeongꢀDong, OjeongꢀGu, BucheonꢀCity,  
GyounggiꢀDo, Korea 421ꢀ809  
PS01  
7/7